DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 01/22] i40e: set up and initialize flow director
Date: Fri, 21 Nov 2014 08:46:35 +0800
Message-ID: <1416530816-2159-2-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1416530816-2159-1-git-send-email-jingjing.wu@intel.com>

set up fortville resources to support flow director, includes
 - queue 0 pair allocated and set up for flow director
 - create vsi
 - reserve memzone for flow director programming packet

Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
---
 lib/librte_pmd_i40e/Makefile      |   2 +
 lib/librte_pmd_i40e/i40e_ethdev.c |  78 +++++++--
 lib/librte_pmd_i40e/i40e_ethdev.h |  25 ++-
 lib/librte_pmd_i40e/i40e_fdir.c   | 324 ++++++++++++++++++++++++++++++++++++++
 lib/librte_pmd_i40e/i40e_rxtx.c   | 144 +++++++++++++++++
 5 files changed, 562 insertions(+), 11 deletions(-)
 create mode 100644 lib/librte_pmd_i40e/i40e_fdir.c

diff --git a/lib/librte_pmd_i40e/Makefile b/lib/librte_pmd_i40e/Makefile
index bd3428f..98e4bdf 100644
--- a/lib/librte_pmd_i40e/Makefile
+++ b/lib/librte_pmd_i40e/Makefile
@@ -91,6 +91,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_ethdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_rxtx.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_ethdev_vf.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_pf.c
+SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_fdir.c
+
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_eal lib/librte_ether
 DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_mempool lib/librte_mbuf
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 5074262..46115c7 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -811,6 +811,18 @@ i40e_dev_start(struct rte_eth_dev *dev)
 		i40e_vsi_enable_queues_intr(pf->vmdq[i].vsi);
 	}
 
+	ret = i40e_fdir_configure(dev);
+	if (ret < 0) {
+		PMD_DRV_LOG(ERR, "failed to configure fdir.");
+		goto err_up;
+	}
+
+	/* enable FDIR MSIX interrupt */
+	if (pf->flags & I40E_FLAG_FDIR) {
+		i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi);
+		i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
+	}
+
 	/* Enable all queues which have been configured */
 	ret = i40e_dev_switch_queues(pf, TRUE);
 	if (ret != I40E_SUCCESS) {
@@ -2818,16 +2830,30 @@ i40e_vsi_setup(struct i40e_pf *pf,
 	case I40E_VSI_VMDQ2:
 		vsi->nb_qps = pf->vmdq_nb_qps;
 		break;
+	case I40E_VSI_FDIR:
+		vsi->nb_qps = pf->fdir_nb_qps;
+		break;
 	default:
 		goto fail_mem;
 	}
-	ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
-	if (ret < 0) {
-		PMD_DRV_LOG(ERR, "VSI %d allocate queue failed %d",
-				vsi->seid, ret);
-		goto fail_mem;
-	}
-	vsi->base_queue = ret;
+	/*
+	 * The filter status descriptor is reported in rx queue 0,
+	 * while the tx queue for fdir filter programming has no
+	 * such constraints, can be non-zero queues.
+	 * To simplify it, choose FDIR vsi use queue 0 pair.
+	 * To make sure it will use queue 0 pair, queue allocation
+	 * need be done before this function is called
+	 */
+	if (type != I40E_VSI_FDIR) {
+		ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
+			if (ret < 0) {
+				PMD_DRV_LOG(ERR, "VSI %d allocate queue failed %d",
+						vsi->seid, ret);
+				goto fail_mem;
+			}
+			vsi->base_queue = ret;
+	} else
+		vsi->base_queue = I40E_FDIR_QUEUE_ID;
 
 	/* VF has MSIX interrupt in VF range, don't allocate here */
 	if (type != I40E_VSI_SRIOV) {
@@ -2996,6 +3022,23 @@ i40e_vsi_setup(struct i40e_pf *pf,
 		ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
 		ctxt.info.valid_sections |=
 			rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
+	} else if (type == I40E_VSI_FDIR) {
+		vsi->uplink_seid = uplink_vsi->uplink_seid;
+		ctxt.pf_num = hw->pf_id;
+		ctxt.vf_num = 0;
+		ctxt.uplink_seid = vsi->uplink_seid;
+		ctxt.connection_type = 0x1;     /* regular data port */
+		ctxt.flags = I40E_AQ_VSI_TYPE_PF;
+		ret = i40e_vsi_config_tc_queue_mapping(vsi, &ctxt.info,
+						I40E_DEFAULT_TCMAP);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to configure "
+					"TC queue mapping.");
+			goto fail_msix_alloc;
+		}
+		ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
+		ctxt.info.valid_sections |=
+			rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
 	} else {
 		PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet");
 		goto fail_msix_alloc;
@@ -3184,8 +3227,16 @@ i40e_pf_setup(struct i40e_pf *pf)
 		PMD_DRV_LOG(ERR, "Could not get switch config, err %d", ret);
 		return ret;
 	}
-
-	/* VSI setup */
+	if (pf->flags & I40E_FLAG_FDIR) {
+		/* make queue allocated first, let FDIR use queue pair 0*/
+		ret = i40e_res_pool_alloc(&pf->qp_pool, I40E_DEFAULT_QP_NUM_FDIR);
+		if (ret != I40E_FDIR_QUEUE_ID) {
+			PMD_DRV_LOG(ERR, "queue allocation fails for FDIR :"
+				    " ret =%d", ret);
+			pf->flags &= ~I40E_FLAG_FDIR;
+		}
+	}
+	/*  main VSI setup */
 	vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, NULL, 0);
 	if (!vsi) {
 		PMD_DRV_LOG(ERR, "Setup of main vsi failed");
@@ -3193,6 +3244,15 @@ i40e_pf_setup(struct i40e_pf *pf)
 	}
 	pf->main_vsi = vsi;
 
+	/* setup FDIR after main vsi created.*/
+	if (pf->flags & I40E_FLAG_FDIR) {
+		ret = i40e_fdir_setup(pf);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to setup flow director.");
+			pf->flags &= ~I40E_FLAG_FDIR;
+		}
+	}
+
 	/* Configure filter control */
 	memset(&settings, 0, sizeof(settings));
 	settings.hash_lut_size = I40E_HASH_LUT_SIZE_128;
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h b/lib/librte_pmd_i40e/i40e_ethdev.h
index 96361c2..e9c714c 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.h
+++ b/lib/librte_pmd_i40e/i40e_ethdev.h
@@ -47,11 +47,12 @@
 #define I40E_QUEUE_BASE_ADDR_UNIT 128
 /* number of VSIs and queue default setting */
 #define I40E_MAX_QP_NUM_PER_VF    16
-#define I40E_DEFAULT_QP_NUM_FDIR  64
+#define I40E_DEFAULT_QP_NUM_FDIR  1
 #define I40E_UINT32_BIT_SIZE      (CHAR_BIT * sizeof(uint32_t))
 #define I40E_VFTA_SIZE            (4096 / I40E_UINT32_BIT_SIZE)
 /* Default TC traffic in case DCB is not enabled */
 #define I40E_DEFAULT_TCMAP        0x1
+#define I40E_FDIR_QUEUE_ID        0
 
 /* Always assign pool 0 to main VSI, VMDQ will start from 1 */
 #define I40E_VMDQ_POOL_BASE       1
@@ -243,6 +244,18 @@ struct i40e_vmdq_info {
 };
 
 /*
+ *  A structure used to define fields of a FDIR related info.
+ */
+struct i40e_fdir_info {
+	struct i40e_vsi *fdir_vsi;     /* pointer to fdir VSI structure */
+	uint16_t match_counter_index;  /* Statistic counter index used for fdir*/
+	struct i40e_tx_queue *txq;
+	struct i40e_rx_queue *rxq;
+	void *prg_pkt;                 /* memory for fdir program packet */
+	uint64_t dma_addr;             /* physic address of packet memory*/
+};
+
+/*
  * Structure to store private data specific for PF instance.
  */
 struct i40e_pf {
@@ -270,7 +283,6 @@ struct i40e_pf {
 	uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */
 	uint16_t vf_nb_qps; /* The number of queue pairs of VF */
 	uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director */
-
 	/* store VXLAN UDP ports */
 	uint16_t vxlan_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];
 	uint16_t vxlan_bitmap; /* Vxlan bit mask */
@@ -279,6 +291,8 @@ struct i40e_pf {
 	uint16_t max_nb_vmdq_vsi; /* Max number of VMDQ VSIs supported */
 	uint16_t nb_cfg_vmdq_vsi; /* number of VMDQ VSIs configured */
 	struct i40e_vmdq_info *vmdq;
+
+	struct i40e_fdir_info fdir; /* flow director info */
 };
 
 enum pending_msg {
@@ -380,6 +394,13 @@ int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
 int i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on);
 uint64_t i40e_config_hena(uint64_t flags);
 uint64_t i40e_parse_hena(uint64_t flags);
+enum i40e_status_code i40e_fdir_setup_tx_resources(struct i40e_pf *pf);
+enum i40e_status_code i40e_fdir_setup_rx_resources(struct i40e_pf *pf);
+int i40e_fdir_setup(struct i40e_pf *pf);
+const struct rte_memzone *i40e_memzone_reserve(const char *name,
+					uint32_t len,
+					int socket_id);
+int i40e_fdir_configure(struct rte_eth_dev *dev);
 
 /* I40E_DEV_PRIVATE_TO */
 #define I40E_DEV_PRIVATE_TO_PF(adapter) \
diff --git a/lib/librte_pmd_i40e/i40e_fdir.c b/lib/librte_pmd_i40e/i40e_fdir.c
new file mode 100644
index 0000000..7708887
--- /dev/null
+++ b/lib/librte_pmd_i40e/i40e_fdir.c
@@ -0,0 +1,324 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdarg.h>
+
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+
+#include "i40e_logs.h"
+#include "i40e/i40e_type.h"
+#include "i40e_ethdev.h"
+#include "i40e_rxtx.h"
+
+#define I40E_FDIR_MZ_NAME          "FDIR_MEMZONE"
+#define I40E_FDIR_PKT_LEN                   512
+
+
+/* Wait count and interval for fdir filter flush */
+#define I40E_FDIR_FLUSH_RETRY       50
+#define I40E_FDIR_FLUSH_INTERVAL_MS 5
+
+#define I40E_COUNTER_PF           2
+/* Statistic counter index for one pf */
+#define I40E_COUNTER_INDEX_FDIR(pf_id)   (0 + (pf_id) * I40E_COUNTER_PF)
+#define I40E_FLX_OFFSET_IN_FIELD_VECTOR   50
+
+static int i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq);
+static int i40e_fdir_flush(struct rte_eth_dev *dev);
+
+static int
+i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq)
+{
+	struct i40e_hw *hw = I40E_VSI_TO_HW(rxq->vsi);
+	struct i40e_hmc_obj_rxq rx_ctx;
+	int err = I40E_SUCCESS;
+
+	memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
+	/* Init the RX queue in hardware */
+	rx_ctx.dbuff = I40E_RXBUF_SZ_1024 >> I40E_RXQ_CTX_DBUFF_SHIFT;
+	rx_ctx.hbuff = 0;
+	rx_ctx.base = rxq->rx_ring_phys_addr / I40E_QUEUE_BASE_ADDR_UNIT;
+	rx_ctx.qlen = rxq->nb_rx_desc;
+#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
+	rx_ctx.dsize = 1;
+#endif
+	rx_ctx.dtype = i40e_header_split_none;
+	rx_ctx.hsplit_0 = I40E_HEADER_SPLIT_NONE;
+	rx_ctx.rxmax = ETHER_MAX_LEN;
+	rx_ctx.tphrdesc_ena = 1;
+	rx_ctx.tphwdesc_ena = 1;
+	rx_ctx.tphdata_ena = 1;
+	rx_ctx.tphhead_ena = 1;
+	rx_ctx.lrxqthresh = 2;
+	rx_ctx.crcstrip = 0;
+	rx_ctx.l2tsel = 1;
+	rx_ctx.showiv = 1;
+	rx_ctx.prefena = 1;
+
+	err = i40e_clear_lan_rx_queue_context(hw, rxq->reg_idx);
+	if (err != I40E_SUCCESS) {
+		PMD_DRV_LOG(ERR, "Failed to clear FDIR RX queue context.");
+		return err;
+	}
+	err = i40e_set_lan_rx_queue_context(hw, rxq->reg_idx, &rx_ctx);
+	if (err != I40E_SUCCESS) {
+		PMD_DRV_LOG(ERR, "Failed to set FDIR RX queue context.");
+		return err;
+	}
+	rxq->qrx_tail = hw->hw_addr +
+		I40E_QRX_TAIL(rxq->vsi->base_queue);
+
+	rte_wmb();
+	/* Init the RX tail regieter. */
+	I40E_PCI_REG_WRITE(rxq->qrx_tail, 0);
+	I40E_PCI_REG_WRITE(rxq->qrx_tail, rxq->nb_rx_desc - 1);
+
+	return err;
+}
+
+/*
+ * i40e_fdir_setup - reserve and initialize the Flow Director resources
+ * @pf: board private structure
+ */
+int
+i40e_fdir_setup(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+	struct i40e_vsi *vsi;
+	int err = I40E_SUCCESS;
+	char z_name[RTE_MEMZONE_NAMESIZE];
+	const struct rte_memzone *mz = NULL;
+	struct rte_eth_dev *eth_dev = pf->adapter->eth_dev;
+
+	PMD_DRV_LOG(INFO, "FDIR HW Capabilities: num_filters_guaranteed = %u,"
+			" num_filters_best_effort = %u.",
+			hw->func_caps.fd_filters_guaranteed,
+			hw->func_caps.fd_filters_best_effort);
+
+	vsi = pf->fdir.fdir_vsi;
+	if (vsi) {
+		PMD_DRV_LOG(ERR, "FDIR vsi pointer needs"
+				 "to be null before creation.");
+		return I40E_ERR_BAD_PTR;
+	}
+	/* make new FDIR VSI */
+	vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR, pf->main_vsi, 0);
+	if (!vsi) {
+		PMD_DRV_LOG(ERR, "Couldn't create FDIR VSI.");
+		return I40E_ERR_NO_AVAILABLE_VSI;
+	}
+	pf->fdir.fdir_vsi = vsi;
+
+	/*Fdir tx queue setup*/
+	err = i40e_fdir_setup_tx_resources(pf);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to setup FDIR TX resources.");
+		goto fail_setup_tx;
+	}
+
+	/*Fdir rx queue setup*/
+	err = i40e_fdir_setup_rx_resources(pf);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to setup FDIR RX resources.");
+		goto fail_setup_rx;
+	}
+
+	err = i40e_tx_queue_init(pf->fdir.txq);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR TX initialization.");
+		goto fail_mem;
+	}
+
+	/* need switch on before dev start*/
+	err = i40e_switch_tx_queue(hw, vsi->base_queue, TRUE);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do fdir TX switch on.");
+		goto fail_mem;
+	}
+
+	/* Init the rx queue in hardware */
+	err = i40e_fdir_rx_queue_init(pf->fdir.rxq);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR RX initialization.");
+		goto fail_mem;
+	}
+
+	/* switch on rx queue */
+	err = i40e_switch_rx_queue(hw, vsi->base_queue, TRUE);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR RX switch on.");
+		goto fail_mem;
+	}
+
+	/* reserve memory for the fdir programming packet */
+	snprintf(z_name, sizeof(z_name), "%s_%s_%d",
+			eth_dev->driver->pci_drv.name,
+			I40E_FDIR_MZ_NAME,
+			eth_dev->data->port_id);
+	mz = i40e_memzone_reserve(z_name, I40E_FDIR_PKT_LEN, SOCKET_ID_ANY);
+	if (!mz) {
+		PMD_DRV_LOG(ERR, "Cannot init memzone for"
+				 "flow director program packet.");
+		err = I40E_ERR_NO_MEMORY;
+		goto fail_mem;
+	}
+	pf->fdir.prg_pkt = mz->addr;
+#ifdef RTE_LIBRTE_XEN_DOM0
+	pf->fdir.dma_addr = rte_mem_phy2mch(mz->memseg_id, mz->phys_addr);
+#else
+	pf->fdir.dma_addr = (uint64_t)mz->phys_addr;
+#endif
+	pf->fdir.match_counter_index = I40E_COUNTER_INDEX_FDIR(hw->pf_id);
+	PMD_DRV_LOG(INFO, "FDIR setup successfully, with programming queue %u.",
+		    vsi->base_queue);
+	return I40E_SUCCESS;
+
+fail_mem:
+	i40e_dev_rx_queue_release(pf->fdir.rxq);
+	pf->fdir.rxq = NULL;
+fail_setup_rx:
+	i40e_dev_tx_queue_release(pf->fdir.txq);
+	pf->fdir.txq = NULL;
+fail_setup_tx:
+	i40e_vsi_release(vsi);
+	pf->fdir.fdir_vsi = NULL;
+	return err;
+}
+
+/* check whether the flow director table in empty */
+static inline int
+i40e_fdir_empty(struct i40e_hw *hw)
+{
+	uint32_t guarant_cnt, best_cnt;
+
+	guarant_cnt = (uint32_t)((I40E_READ_REG(hw, I40E_PFQF_FDSTAT) &
+				 I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) >>
+				 I40E_PFQF_FDSTAT_GUARANT_CNT_SHIFT);
+	best_cnt = (uint32_t)((I40E_READ_REG(hw, I40E_PFQF_FDSTAT) &
+			      I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
+			      I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
+	if (best_cnt + guarant_cnt > 0)
+		return -1;
+
+	return 0;
+}
+
+/*
+ * Configure flow director related setting
+ */
+int
+i40e_fdir_configure(struct rte_eth_dev *dev)
+{
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t val;
+	int ret = 0;
+
+	/*
+	* configuration need to be done before
+	* flow director filters are added
+	* If filters exist, flush them.
+	*/
+	if (i40e_fdir_empty(hw) < 0) {
+		ret = i40e_fdir_flush(dev);
+		if (ret) {
+			PMD_DRV_LOG(ERR, "failed to flush fdir table.");
+			return ret;
+		}
+	}
+
+	val = I40E_READ_REG(hw, I40E_PFQF_CTL_0);
+	if ((pf->flags & I40E_FLAG_FDIR) &&
+		dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_PERFECT) {
+		/* enable FDIR filter */
+		val |= I40E_PFQF_CTL_0_FD_ENA_MASK;
+		I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
+	} else {
+		/* disable FDIR filter */
+		val &= ~I40E_PFQF_CTL_0_FD_ENA_MASK;
+		I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
+		pf->flags &= ~I40E_FLAG_FDIR;
+	}
+
+	return ret;
+}
+
+/*
+ * i40e_fdir_flush - clear all filters of Flow Director table
+ * @pf: board private structure
+ */
+static int
+i40e_fdir_flush(struct rte_eth_dev *dev)
+{
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+	uint32_t reg;
+	uint16_t guarant_cnt, best_cnt;
+	int i;
+
+	I40E_WRITE_REG(hw, I40E_PFQF_CTL_1, I40E_PFQF_CTL_1_CLEARFDTABLE_MASK);
+	I40E_WRITE_FLUSH(hw);
+
+	for (i = 0; i < I40E_FDIR_FLUSH_RETRY; i++) {
+		rte_delay_ms(I40E_FDIR_FLUSH_INTERVAL_MS);
+		reg = I40E_READ_REG(hw, I40E_PFQF_CTL_1);
+		if (!(reg & I40E_PFQF_CTL_1_CLEARFDTABLE_MASK))
+			break;
+	}
+	if (i >= I40E_FDIR_FLUSH_RETRY) {
+		PMD_DRV_LOG(ERR, "FD table did not flush, may need more time.");
+		return -ETIMEDOUT;
+	}
+	guarant_cnt = (uint16_t)((I40E_READ_REG(hw, I40E_PFQF_FDSTAT) &
+				I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) >>
+				I40E_PFQF_FDSTAT_GUARANT_CNT_SHIFT);
+	best_cnt = (uint16_t)((I40E_READ_REG(hw, I40E_PFQF_FDSTAT) &
+				I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
+				I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
+	if (guarant_cnt != 0 || best_cnt != 0) {
+		PMD_DRV_LOG(ERR, "Failed to flush FD table.");
+		return -ENOSYS;
+	} else
+		PMD_DRV_LOG(INFO, "FD table Flush success.");
+	return 0;
+}
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 487591d..1c5cfd6 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -2098,6 +2098,24 @@ i40e_ring_dma_zone_reserve(struct rte_eth_dev *dev,
 #endif
 }
 
+const struct rte_memzone *
+i40e_memzone_reserve(const char *name, uint32_t len, int socket_id)
+{
+	const struct rte_memzone *mz = NULL;
+
+	mz = rte_memzone_lookup(name);
+	if (mz)
+		return mz;
+#ifdef RTE_LIBRTE_XEN_DOM0
+	mz = rte_memzone_reserve_bounded(name, len,
+		socket_id, 0, I40E_ALIGN, RTE_PGSIZE_2M);
+#else
+	mz = rte_memzone_reserve_aligned(name, len,
+				socket_id, 0, I40E_ALIGN);
+#endif
+	return mz;
+}
+
 void
 i40e_rx_queue_release_mbufs(struct i40e_rx_queue *rxq)
 {
@@ -2231,6 +2249,8 @@ i40e_tx_queue_init(struct i40e_tx_queue *txq)
 	tx_ctx.base = txq->tx_ring_phys_addr / I40E_QUEUE_BASE_ADDR_UNIT;
 	tx_ctx.qlen = txq->nb_tx_desc;
 	tx_ctx.rdylist = rte_le_to_cpu_16(vsi->info.qs_handle[0]);
+	if (vsi->type == I40E_VSI_FDIR)
+		tx_ctx.fd_ena = TRUE;
 
 	err = i40e_clear_lan_tx_queue_context(hw, pf_q);
 	if (err != I40E_SUCCESS) {
@@ -2447,3 +2467,127 @@ i40e_dev_clear_queues(struct rte_eth_dev *dev)
 		i40e_reset_rx_queue(dev->data->rx_queues[i]);
 	}
 }
+
+#define I40E_FDIR_NUM_TX_DESC  I40E_MIN_RING_DESC
+#define I40E_FDIR_NUM_RX_DESC  I40E_MIN_RING_DESC
+
+enum i40e_status_code
+i40e_fdir_setup_tx_resources(struct i40e_pf *pf)
+{
+	struct i40e_tx_queue *txq;
+	const struct rte_memzone *tz = NULL;
+	uint32_t ring_size;
+	struct rte_eth_dev *dev = pf->adapter->eth_dev;
+
+	if (!pf) {
+		PMD_DRV_LOG(ERR, "PF is not available");
+		return I40E_ERR_BAD_PTR;
+	}
+
+	/* Allocate the TX queue data structure. */
+	txq = rte_zmalloc_socket("i40e fdir tx queue",
+				  sizeof(struct i40e_tx_queue),
+				  CACHE_LINE_SIZE,
+				  SOCKET_ID_ANY);
+	if (!txq) {
+		PMD_DRV_LOG(ERR, "Failed to allocate memory for "
+					"tx queue structure.");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	/* Allocate TX hardware ring descriptors. */
+	ring_size = sizeof(struct i40e_tx_desc) * I40E_FDIR_NUM_TX_DESC;
+	ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
+
+	tz = i40e_ring_dma_zone_reserve(dev,
+					"fdir_tx_ring",
+					I40E_FDIR_QUEUE_ID,
+					ring_size,
+					SOCKET_ID_ANY);
+	if (!tz) {
+		i40e_dev_tx_queue_release(txq);
+		PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for TX.");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	txq->nb_tx_desc = I40E_FDIR_NUM_TX_DESC;
+	txq->queue_id = I40E_FDIR_QUEUE_ID;
+	txq->reg_idx = pf->fdir.fdir_vsi->base_queue;
+	txq->vsi = pf->fdir.fdir_vsi;
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+	txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
+#else
+	txq->tx_ring_phys_addr = (uint64_t)tz->phys_addr;
+#endif
+	txq->tx_ring = (struct i40e_tx_desc *)tz->addr;
+	/*
+	 * don't need to allocate software ring and reset for the fdir
+	 * program queue just set the queue has been configured.
+	 */
+	txq->q_set = TRUE;
+	pf->fdir.txq = txq;
+
+	return I40E_SUCCESS;
+}
+
+enum i40e_status_code
+i40e_fdir_setup_rx_resources(struct i40e_pf *pf)
+{
+	struct i40e_rx_queue *rxq;
+	const struct rte_memzone *rz = NULL;
+	uint32_t ring_size;
+	struct rte_eth_dev *dev = pf->adapter->eth_dev;
+
+	if (!pf) {
+		PMD_DRV_LOG(ERR, "PF is not available");
+		return I40E_ERR_BAD_PTR;
+	}
+
+	/* Allocate the RX queue data structure. */
+	rxq = rte_zmalloc_socket("i40e fdir rx queue",
+				  sizeof(struct i40e_rx_queue),
+				  CACHE_LINE_SIZE,
+				  SOCKET_ID_ANY);
+	if (!rxq) {
+		PMD_DRV_LOG(ERR, "Failed to allocate memory for "
+					"rx queue structure.");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	/* Allocate RX hardware ring descriptors. */
+	ring_size = sizeof(union i40e_rx_desc) * I40E_FDIR_NUM_RX_DESC;
+	ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
+
+	rz = i40e_ring_dma_zone_reserve(dev,
+					"fdir_rx_ring",
+					I40E_FDIR_QUEUE_ID,
+					ring_size,
+					SOCKET_ID_ANY);
+	if (!rz) {
+		i40e_dev_rx_queue_release(rxq);
+		PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX.");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	rxq->nb_rx_desc = I40E_FDIR_NUM_RX_DESC;
+	rxq->queue_id = I40E_FDIR_QUEUE_ID;
+	rxq->reg_idx = pf->fdir.fdir_vsi->base_queue;
+	rxq->vsi = pf->fdir.fdir_vsi;
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+	rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
+#else
+	rxq->rx_ring_phys_addr = (uint64_t)rz->phys_addr;
+#endif
+	rxq->rx_ring = (union i40e_rx_desc *)rz->addr;
+
+	/*
+	 * Don't need to allocate software ring and reset for the fdir
+	 * rx queue, just set the queue has been configured.
+	 */
+	rxq->q_set = TRUE;
+	pf->fdir.rxq = rxq;
+
+	return I40E_SUCCESS;
+}
-- 
1.8.1.4

  reply	other threads:[~2014-11-21  0:37 UTC|newest]

Thread overview: 123+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-26  6:03 [dpdk-dev] [PATCH v3 00/20] Support flow director programming on Fortville Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 01/20] i40e: set up and initialize flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 02/20] i40e: tear down " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 03/20] i40e: initialize flexible payload setting Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 04/20] lib/librte_ether: new filter APIs definition Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 05/20] lib/librte_ether: define structures for adding/deleting flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 06/20] i40e: implement operations to add/delete " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 07/20] app/test-pmd: add test commands to add/delete flow director filter Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 08/20] i40e: match counter for flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 09/20] i40e: report flow director match info to mbuf Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 10/20] lib/librte_ether: define structures for getting flow director information Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 11/20] i40e: implement operations to get fdir info Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 12/20] app/test-pmd: display fdir statistics Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 13/20] i40e: implement operation to flush flow director table Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 14/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 15/20] lib/librte_ether: define structures for configuring flexible payload Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v316/20] i40e: implement operations to configure " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 17/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 18/20] lib/librte_ether: define structures for configuring flex masks Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 19/20] i40e: implement operations to configure flexible masks Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 20/20] app/test-pmd: add test command " Jingjing Wu
2014-10-13 15:58   ` De Lara Guarch, Pablo
2014-10-22  1:01 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 02/21] i40e: tear down " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-27 16:57     ` Thomas Monjalon
2014-10-28  1:18       ` Wu, Jingjing
2014-10-28 13:17         ` Thomas Monjalon
2014-10-29  1:29           ` Wu, Jingjing
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-28 13:23     ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-28 13:28     ` Thomas Monjalon
2014-10-29  1:45       ` Wu, Jingjing
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-28 13:44     ` Thomas Monjalon
2014-10-29  2:10       ` Wu, Jingjing
2014-10-29  9:48         ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 15/21] testpmd: add test command " Jingjing Wu
2014-10-28 13:53     ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-28 14:14     ` Thomas Monjalon
2014-10-29  3:21       ` Wu, Jingjing
2014-10-29  9:55         ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 18/21] testpmd: add test command " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 21/21] testpmd: add test command " Jingjing Wu
2014-10-28 14:18     ` Thomas Monjalon
2014-10-29  2:35       ` Wu, Jingjing
2014-10-27 15:22   ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Thomas Monjalon
2014-10-28  0:48   ` Zhang, Helin
2014-10-30  7:26   ` [dpdk-dev] [PATCH v5 " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-30  8:25       ` Wu, Jingjing
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 02/21] i40e: tear down " Jingjing Wu
2014-11-19  7:53       ` Cao, Min
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-11-05 21:18       ` De Lara Guarch, Pablo
2014-11-13  9:50         ` Thomas Monjalon
2014-11-13 11:36           ` Wu, Jingjing
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 15/21] testpmd: add test command " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 18/21] testpmd: add test command " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 21/21] testpmd: add test command " Jingjing Wu
2014-10-30  8:07     ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-11-21  0:46     ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Jingjing Wu
2014-11-21  0:46       ` Jingjing Wu [this message]
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 02/22] i40e: tear down flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 03/22] i40e: initialize flexible payload setting Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 04/22] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 05/22] i40e: define functions for transition between flow_type and pctype Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 06/22] i40e: implement operations to add/delete flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 07/22] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 08/22] i40e: match counter for flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 09/22] mbuf: extend fdir field Jingjing Wu
2014-11-21 17:03         ` Chilikin, Andrey
2014-11-21 19:34           ` Ananyev, Konstantin
2014-11-21 19:37             ` Chilikin, Andrey
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 10/22] i40e: report flow director match info to mbuf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 11/22] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 12/22] i40e: implement operation to flush flow director table Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 13/22] testpmd: add test command " Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 14/22] ethdev: define structures for getting flow director information Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 15/22] i40e: implement operations to get fdir info Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 16/22] ethdev: define structures for getting flow director statistics Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 17/22] i40e: implement operations to get fdir statistics Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 18/22] testpmd: display fdir info Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 19/22] ethdev: add flexible payload setting in eth_conf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 20/22] i40e: take flow director flexible payload configuration Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 21/22] testpmd: add test command to configure flexible mask Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 22/22] testpmd: add test command to configure flexible payload Jingjing Wu
2014-11-21 11:34       ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Ananyev, Konstantin
2014-11-24 23:20         ` Thomas Monjalon
2014-11-25  4:51           ` Wu, Jingjing
2014-11-25  9:23             ` Thomas Monjalon
2014-10-30  7:34   ` [dpdk-dev] [PATCH v4 00/21] " Cao, Min
2014-11-19  7:53   ` Cao, Min
2014-10-30  7:12 ` [dpdk-dev] [PATCH v3 00/20] " Cao, Min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416530816-2159-2-git-send-email-jingjing.wu@intel.com \
    --to=jingjing.wu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git