From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 20/22] i40e: take flow director flexible payload configuration
Date: Fri, 21 Nov 2014 08:46:54 +0800 [thread overview]
Message-ID: <1416530816-2159-21-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1416530816-2159-1-git-send-email-jingjing.wu@intel.com>
configure flexible payload and flex mask in i40e driver
It includes arguments verification and HW setting.
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
---
lib/librte_pmd_i40e/i40e_fdir.c | 283 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/lib/librte_pmd_i40e/i40e_fdir.c b/lib/librte_pmd_i40e/i40e_fdir.c
index c452a80..54f3e24 100644
--- a/lib/librte_pmd_i40e/i40e_fdir.c
+++ b/lib/librte_pmd_i40e/i40e_fdir.c
@@ -109,6 +109,13 @@
#define I40E_FLEX_WORD_MASK(off) (0x80 >> (off))
static int i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq);
+static int i40e_check_fdir_flex_conf(
+ const struct rte_eth_fdir_flex_conf *conf);
+static void i40e_set_flx_pld_cfg(struct i40e_pf *pf,
+ const struct rte_eth_flex_payload_cfg *cfg);
+static void i40e_set_flex_mask_on_pctype(struct i40e_pf *pf,
+ enum i40e_filter_pctype pctype,
+ const struct rte_eth_fdir_flex_mask *mask_cfg);
static int i40e_fdir_construct_pkt(struct i40e_pf *pf,
const struct rte_eth_fdir_input *fdir_input,
unsigned char *raw_pkt);
@@ -364,6 +371,261 @@ i40e_init_flx_pld(struct i40e_pf *pf)
}
}
+#define I40E_WORD(hi, lo) (uint16_t)((((hi) << 8) & 0xFF00) | ((lo) & 0xFF))
+
+#define I40E_VALIDATE_FLEX_PIT(flex_pit1, flex_pit2) do { \
+ if ((flex_pit2).src_offset < \
+ (flex_pit1).src_offset + (flex_pit1).size) { \
+ PMD_DRV_LOG(ERR, "src_offset should be not" \
+ " less than than previous offset" \
+ " + previous FSIZE."); \
+ return -EINVAL; \
+ } \
+} while (0)
+
+/*
+ * i40e_srcoff_to_flx_pit - transform the src_offset into flex_pit structure,
+ * and the flex_pit will be sorted by it's src_offset value
+ */
+static inline uint16_t
+i40e_srcoff_to_flx_pit(const uint16_t *src_offset,
+ struct i40e_fdir_flex_pit *flex_pit)
+{
+ uint16_t src_tmp, size, num = 0;
+ uint16_t i, k, j = 0;
+
+ while (j < I40E_FDIR_MAX_FLEX_LEN) {
+ size = 1;
+ for (; j < I40E_FDIR_MAX_FLEX_LEN; j++) {
+ if (src_offset[j + 1] == src_offset[j] + 1)
+ size++;
+ else {
+ src_tmp = src_offset[j] + 1 - size;
+ /* the flex_pit need to be sort by scr_offset */
+ for (i = 0; i < num; i++) {
+ if (src_tmp < flex_pit[i].src_offset)
+ break;
+ }
+ /* if insert required, move backward */
+ for (k = num; k > i; k--)
+ flex_pit[k] = flex_pit[k - 1];
+ /* insert */
+ flex_pit[i].dst_offset = j + 1 - size;
+ flex_pit[i].src_offset = src_tmp;
+ flex_pit[i].size = size;
+ j++;
+ num++;
+ break;
+ }
+ }
+ }
+ return num;
+}
+
+/* i40e_check_fdir_flex_payload -check flex payload configuration arguments */
+static inline int
+i40e_check_fdir_flex_payload(const struct rte_eth_flex_payload_cfg *flex_cfg)
+{
+ struct i40e_fdir_flex_pit flex_pit[I40E_FDIR_MAX_FLEX_LEN];
+ uint16_t num, i;
+
+ for (i = 0; i < I40E_FDIR_MAX_FLEX_LEN; i++) {
+ if (flex_cfg->src_offset[i] >= I40E_MAX_FLX_SOURCE_OFF) {
+ PMD_DRV_LOG(ERR, "exceeds maxmial payload limit.");
+ return -EINVAL;
+ }
+ }
+
+ memset(flex_pit, 0, sizeof(flex_pit));
+ num = i40e_srcoff_to_flx_pit(flex_cfg->src_offset, flex_pit);
+ if (num > I40E_MAX_FLXPLD_FIED) {
+ PMD_DRV_LOG(ERR, "exceeds maxmial number of flex fields.");
+ return -EINVAL;
+ }
+ for (i = 0; i < num; i++) {
+ if (flex_pit[i].size & 0x01 || flex_pit[i].dst_offset & 0x01 ||
+ flex_pit[i].src_offset & 0x01) {
+ PMD_DRV_LOG(ERR, "flexpayload should be measured"
+ " in word");
+ return -EINVAL;
+ }
+ if (i != num - 1)
+ I40E_VALIDATE_FLEX_PIT(flex_pit[i], flex_pit[i + 1]);
+ }
+ return 0;
+}
+
+/*
+ * i40e_check_fdir_flex_conf -check if the flex payload and mask configuration
+ * arguments are valid
+ */
+static int
+i40e_check_fdir_flex_conf(const struct rte_eth_fdir_flex_conf *conf)
+{
+ const struct rte_eth_flex_payload_cfg *flex_cfg;
+ const struct rte_eth_fdir_flex_mask *flex_mask;
+ uint16_t mask_tmp;
+ uint8_t nb_bitmask;
+ uint16_t i, j;
+ int ret = 0;
+
+ if (conf == NULL) {
+ PMD_DRV_LOG(INFO, "NULL pointer.");
+ return -EINVAL;
+ }
+ /* check flexible payload setting configuration */
+ if (conf->nb_payloads > RTE_ETH_L4_PAYLOAD) {
+ PMD_DRV_LOG(ERR, "invalid number of payload setting.");
+ return -EINVAL;
+ }
+ for (i = 0; i < conf->nb_payloads; i++) {
+ flex_cfg = &conf->flex_set[i];
+ if (flex_cfg->type > RTE_ETH_L4_PAYLOAD) {
+ PMD_DRV_LOG(ERR, "invalid payload type.");
+ return -EINVAL;
+ }
+ ret = i40e_check_fdir_flex_payload(flex_cfg);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR, "invalid flex payload arguments.");
+ return -EINVAL;
+ }
+ }
+
+ /* check flex mask setting configuration */
+ if (conf->nb_flexmasks > RTE_ETH_FLOW_TYPE_FRAG_IPV6) {
+ PMD_DRV_LOG(ERR, "invalid number of flex masks.");
+ return -EINVAL;
+ }
+ for (i = 0; i < conf->nb_flexmasks; i++) {
+ flex_mask = &conf->flex_mask[i];
+ if (!I40E_VALID_FLOW_TYPE(flex_mask->flow_type)) {
+ PMD_DRV_LOG(WARNING, "invalid flow type.");
+ return -EINVAL;
+ }
+ nb_bitmask = 0;
+ for (j = 0; j < I40E_FDIR_MAX_FLEX_LEN; j += sizeof(uint16_t)) {
+ mask_tmp = I40E_WORD(flex_mask->mask[j],
+ flex_mask->mask[j + 1]);
+ if (mask_tmp != 0x0 && mask_tmp != UINT16_MAX) {
+ nb_bitmask++;
+ if (nb_bitmask > I40E_FDIR_BITMASK_NUM_WORD) {
+ PMD_DRV_LOG(ERR, " exceed maximal"
+ " number of bitmasks.");
+ return -EINVAL;
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * i40e_set_flx_pld_cfg -configure the rule how bytes stream is extracted as flexible payload
+ * @pf: board private structure
+ * @cfg: the rule how bytes stream is extracted as flexible payload
+ */
+static void
+i40e_set_flx_pld_cfg(struct i40e_pf *pf,
+ const struct rte_eth_flex_payload_cfg *cfg)
+{
+ struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+ struct i40e_fdir_flex_pit flex_pit[I40E_MAX_FLXPLD_FIED];
+ uint32_t flx_pit;
+ uint16_t num, min_next_off; /* in words */
+ uint8_t field_idx = 0;
+ uint8_t layer_idx = 0;
+ uint16_t i;
+
+ if (cfg->type == RTE_ETH_L2_PAYLOAD)
+ layer_idx = I40E_FLXPLD_L2_IDX;
+ else if (cfg->type == RTE_ETH_L3_PAYLOAD)
+ layer_idx = I40E_FLXPLD_L3_IDX;
+ else if (cfg->type == RTE_ETH_L4_PAYLOAD)
+ layer_idx = I40E_FLXPLD_L4_IDX;
+
+ memset(flex_pit, 0, sizeof(flex_pit));
+ num = i40e_srcoff_to_flx_pit(cfg->src_offset, flex_pit);
+
+ for (i = 0; i < num; i++) {
+ field_idx = layer_idx * I40E_MAX_FLXPLD_FIED + i;
+ /* record the info in fdir structure */
+ pf->fdir.flex_set[field_idx].src_offset =
+ flex_pit[i].src_offset / sizeof(uint16_t);
+ pf->fdir.flex_set[field_idx].size =
+ flex_pit[i].size / sizeof(uint16_t);
+ pf->fdir.flex_set[field_idx].dst_offset =
+ flex_pit[i].dst_offset / sizeof(uint16_t);
+ flx_pit = MK_FLX_PIT(pf->fdir.flex_set[field_idx].src_offset,
+ pf->fdir.flex_set[field_idx].size,
+ pf->fdir.flex_set[field_idx].dst_offset);
+
+ I40E_WRITE_REG(hw, I40E_PRTQF_FLX_PIT(field_idx), flx_pit);
+ }
+ min_next_off = pf->fdir.flex_set[field_idx].src_offset +
+ pf->fdir.flex_set[field_idx].size;
+
+ for (; i < I40E_MAX_FLXPLD_FIED; i++) {
+ /* set the non-used register obeying register's constrain */
+ flx_pit = MK_FLX_PIT(min_next_off, NONUSE_FLX_PIT_FSIZE,
+ NONUSE_FLX_PIT_DEST_OFF);
+ I40E_WRITE_REG(hw,
+ I40E_PRTQF_FLX_PIT(layer_idx * I40E_MAX_FLXPLD_FIED + i),
+ flx_pit);
+ min_next_off++;
+ }
+}
+
+/*
+ * i40e_set_flex_mask_on_pctype - configure the mask on flexible payload
+ * @pf: board private structure
+ * @pctype: packet classify type
+ * @flex_masks: mask for flexible payload
+ */
+static void
+i40e_set_flex_mask_on_pctype(struct i40e_pf *pf,
+ enum i40e_filter_pctype pctype,
+ const struct rte_eth_fdir_flex_mask *mask_cfg)
+{
+ struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+ struct i40e_fdir_flex_mask *flex_mask;
+ uint32_t flxinset, fd_mask;
+ uint16_t mask_tmp;
+ uint8_t i, nb_bitmask = 0;
+
+ flex_mask = &pf->fdir.flex_mask[pctype];
+ memset(flex_mask, 0, sizeof(struct i40e_fdir_flex_mask));
+ for (i = 0; i < I40E_FDIR_MAX_FLEX_LEN; i += sizeof(uint16_t)) {
+ mask_tmp = I40E_WORD(mask_cfg->mask[i], mask_cfg->mask[i + 1]);
+ if (mask_tmp != 0x0) {
+ flex_mask->word_mask |=
+ I40E_FLEX_WORD_MASK(i / sizeof(uint16_t));
+ if (mask_tmp != UINT16_MAX) {
+ /* set bit mask */
+ flex_mask->bitmask[nb_bitmask].mask = ~mask_tmp;
+ flex_mask->bitmask[nb_bitmask].offset =
+ i / sizeof(uint16_t);
+ nb_bitmask++;
+ }
+ }
+ }
+ /* write mask to hw */
+ flxinset = (flex_mask->word_mask <<
+ I40E_PRTQF_FD_FLXINSET_INSET_SHIFT) &
+ I40E_PRTQF_FD_FLXINSET_INSET_MASK;
+ I40E_WRITE_REG(hw, I40E_PRTQF_FD_FLXINSET(pctype), flxinset);
+
+ for (i = 0; i < nb_bitmask; i++) {
+ fd_mask = (flex_mask->bitmask[i].mask <<
+ I40E_PRTQF_FD_MSK_MASK_SHIFT) &
+ I40E_PRTQF_FD_MSK_MASK_MASK;
+ fd_mask |= ((flex_mask->bitmask[i].offset +
+ I40E_FLX_OFFSET_IN_FIELD_VECTOR) <<
+ I40E_PRTQF_FD_MSK_OFFSET_SHIFT) &
+ I40E_PRTQF_FD_MSK_OFFSET_MASK;
+ I40E_WRITE_REG(hw, I40E_PRTQF_FD_MSK(pctype, i), fd_mask);
+ }
+}
+
/*
* Configure flow director related setting
*/
@@ -372,7 +634,10 @@ i40e_fdir_configure(struct rte_eth_dev *dev)
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_eth_fdir_flex_conf *conf;
+ enum i40e_filter_pctype pctype;
uint32_t val;
+ uint8_t i;
int ret = 0;
/*
@@ -396,6 +661,24 @@ i40e_fdir_configure(struct rte_eth_dev *dev)
I40E_WRITE_REG(hw, I40E_PFQF_CTL_0, val);
i40e_init_flx_pld(pf); /* set flex config to default value */
+
+ conf = &dev->data->dev_conf.fdir_conf.flex_conf;
+ ret = i40e_check_fdir_flex_conf(conf);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR, " invalid configuration arguments.");
+ return -EINVAL;
+ }
+ /* configure flex payload */
+ for (i = 0; i < conf->nb_payloads; i++)
+ i40e_set_flx_pld_cfg(pf, &conf->flex_set[i]);
+ /* configure flex mask*/
+ for (i = 0; i < conf->nb_flexmasks; i++) {
+ pctype = i40e_flowtype_to_pctype(
+ conf->flex_mask[i].flow_type);
+ i40e_set_flex_mask_on_pctype(pf,
+ pctype,
+ &conf->flex_mask[i]);
+ }
} else {
/* disable FDIR filter */
val &= ~I40E_PFQF_CTL_0_FD_ENA_MASK;
--
1.8.1.4
next prev parent reply other threads:[~2014-11-21 0:38 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 6:03 [dpdk-dev] [PATCH v3 00/20] Support flow director programming on Fortville Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 01/20] i40e: set up and initialize flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 02/20] i40e: tear down " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 03/20] i40e: initialize flexible payload setting Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 04/20] lib/librte_ether: new filter APIs definition Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 05/20] lib/librte_ether: define structures for adding/deleting flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 06/20] i40e: implement operations to add/delete " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 07/20] app/test-pmd: add test commands to add/delete flow director filter Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 08/20] i40e: match counter for flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 09/20] i40e: report flow director match info to mbuf Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 10/20] lib/librte_ether: define structures for getting flow director information Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 11/20] i40e: implement operations to get fdir info Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 12/20] app/test-pmd: display fdir statistics Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 13/20] i40e: implement operation to flush flow director table Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 14/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 15/20] lib/librte_ether: define structures for configuring flexible payload Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v316/20] i40e: implement operations to configure " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 17/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 18/20] lib/librte_ether: define structures for configuring flex masks Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 19/20] i40e: implement operations to configure flexible masks Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 20/20] app/test-pmd: add test command " Jingjing Wu
2014-10-13 15:58 ` De Lara Guarch, Pablo
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 02/21] i40e: tear down " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-27 16:57 ` Thomas Monjalon
2014-10-28 1:18 ` Wu, Jingjing
2014-10-28 13:17 ` Thomas Monjalon
2014-10-29 1:29 ` Wu, Jingjing
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-28 13:23 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-28 13:28 ` Thomas Monjalon
2014-10-29 1:45 ` Wu, Jingjing
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-28 13:44 ` Thomas Monjalon
2014-10-29 2:10 ` Wu, Jingjing
2014-10-29 9:48 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 15/21] testpmd: add test command " Jingjing Wu
2014-10-28 13:53 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-28 14:14 ` Thomas Monjalon
2014-10-29 3:21 ` Wu, Jingjing
2014-10-29 9:55 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 18/21] testpmd: add test command " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 21/21] testpmd: add test command " Jingjing Wu
2014-10-28 14:18 ` Thomas Monjalon
2014-10-29 2:35 ` Wu, Jingjing
2014-10-27 15:22 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Thomas Monjalon
2014-10-28 0:48 ` Zhang, Helin
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-30 8:25 ` Wu, Jingjing
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 02/21] i40e: tear down " Jingjing Wu
2014-11-19 7:53 ` Cao, Min
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-11-05 21:18 ` De Lara Guarch, Pablo
2014-11-13 9:50 ` Thomas Monjalon
2014-11-13 11:36 ` Wu, Jingjing
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 15/21] testpmd: add test command " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 18/21] testpmd: add test command " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 21/21] testpmd: add test command " Jingjing Wu
2014-10-30 8:07 ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 01/22] i40e: set up and initialize flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 02/22] i40e: tear down " Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 03/22] i40e: initialize flexible payload setting Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 04/22] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 05/22] i40e: define functions for transition between flow_type and pctype Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 06/22] i40e: implement operations to add/delete flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 07/22] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 08/22] i40e: match counter for flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 09/22] mbuf: extend fdir field Jingjing Wu
2014-11-21 17:03 ` Chilikin, Andrey
2014-11-21 19:34 ` Ananyev, Konstantin
2014-11-21 19:37 ` Chilikin, Andrey
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 10/22] i40e: report flow director match info to mbuf Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 11/22] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 12/22] i40e: implement operation to flush flow director table Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 13/22] testpmd: add test command " Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 14/22] ethdev: define structures for getting flow director information Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 15/22] i40e: implement operations to get fdir info Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 16/22] ethdev: define structures for getting flow director statistics Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 17/22] i40e: implement operations to get fdir statistics Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 18/22] testpmd: display fdir info Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 19/22] ethdev: add flexible payload setting in eth_conf Jingjing Wu
2014-11-21 0:46 ` Jingjing Wu [this message]
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 21/22] testpmd: add test command to configure flexible mask Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 22/22] testpmd: add test command to configure flexible payload Jingjing Wu
2014-11-21 11:34 ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Ananyev, Konstantin
2014-11-24 23:20 ` Thomas Monjalon
2014-11-25 4:51 ` Wu, Jingjing
2014-11-25 9:23 ` Thomas Monjalon
2014-10-30 7:34 ` [dpdk-dev] [PATCH v4 00/21] " Cao, Min
2014-11-19 7:53 ` Cao, Min
2014-10-30 7:12 ` [dpdk-dev] [PATCH v3 00/20] " Cao, Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416530816-2159-21-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).