From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 1/2] bond: add mode 4 support v6
Date: Wed, 26 Nov 2014 11:17:22 +0000 [thread overview]
Message-ID: <1417000643-26885-2-git-send-email-michalx.k.jastrzebski@intel.com> (raw)
In-Reply-To: <1417000643-26885-1-git-send-email-michalx.k.jastrzebski@intel.com>
From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch add mode 4 support to other link bonding modes.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
---
lib/librte_ether/rte_ether.h | 1 +
lib/librte_pmd_bond/Makefile | 2 +
lib/librte_pmd_bond/rte_eth_bond.h | 5 +
lib/librte_pmd_bond/rte_eth_bond_8023ad.c | 1216 +++++++++++++++++++++
lib/librte_pmd_bond/rte_eth_bond_8023ad.h | 214 ++++
lib/librte_pmd_bond/rte_eth_bond_8023ad_private.h | 308 ++++++
lib/librte_pmd_bond/rte_eth_bond_api.c | 91 +-
lib/librte_pmd_bond/rte_eth_bond_args.c | 1 +
lib/librte_pmd_bond/rte_eth_bond_pmd.c | 262 ++++-
lib/librte_pmd_bond/rte_eth_bond_private.h | 31 +-
10 files changed, 2083 insertions(+), 48 deletions(-)
create mode 100644 lib/librte_pmd_bond/rte_eth_bond_8023ad.c
create mode 100644 lib/librte_pmd_bond/rte_eth_bond_8023ad.h
create mode 100644 lib/librte_pmd_bond/rte_eth_bond_8023ad_private.h
diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
index 187608d..7e7d22c 100644
--- a/lib/librte_ether/rte_ether.h
+++ b/lib/librte_ether/rte_ether.h
@@ -328,6 +328,7 @@ struct vxlan_hdr {
#define ETHER_TYPE_RARP 0x8035 /**< Reverse Arp Protocol. */
#define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
#define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
+#define ETHER_TYPE_SLOW 0x8809 /**< Slow protocols (LACP and Marker). */
#define ETHER_VXLAN_HLEN (sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr))
/**< VXLAN tunnel header length. */
diff --git a/lib/librte_pmd_bond/Makefile b/lib/librte_pmd_bond/Makefile
index d4e10bf..cdff126 100644
--- a/lib/librte_pmd_bond/Makefile
+++ b/lib/librte_pmd_bond/Makefile
@@ -45,6 +45,7 @@ CFLAGS += $(WERROR_FLAGS)
SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_api.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += rte_eth_bond_8023ad.c
ifeq ($(CONFIG_RTE_MBUF_REFCNT),n)
$(info WARNING: Link Bonding Broadcast mode is disabled because it needs MBUF_REFCNT.)
@@ -54,6 +55,7 @@ endif
# Export include files
#
SYMLINK-y-include += rte_eth_bond.h
+SYMLINK-y-include += rte_eth_bond_8023ad.h
# this lib depends upon:
DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += lib/librte_mbuf
diff --git a/lib/librte_pmd_bond/rte_eth_bond.h b/lib/librte_pmd_bond/rte_eth_bond.h
index 085500b..dd04743 100644
--- a/lib/librte_pmd_bond/rte_eth_bond.h
+++ b/lib/librte_pmd_bond/rte_eth_bond.h
@@ -77,6 +77,11 @@ extern "C" {
* In this mode all transmitted packets will be transmitted on all available
* active slaves of the bonded. */
#endif
+#define BONDING_MODE_8023AD (4)
+/**< 802.3AD (Mode 4).
+ * In this mode transmission and reception of packets is managed by LACP
+ * protocol specified in 802.3AD documentation. */
+
/* Balance Mode Transmit Policies */
#define BALANCE_XMIT_POLICY_LAYER2 (0)
/**< Layer 2 (Ethernet MAC) */
diff --git a/lib/librte_pmd_bond/rte_eth_bond_8023ad.c b/lib/librte_pmd_bond/rte_eth_bond_8023ad.c
new file mode 100644
index 0000000..5a0714e
--- /dev/null
+++ b/lib/librte_pmd_bond/rte_eth_bond_8023ad.c
@@ -0,0 +1,1216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stddef.h>
+#include <string.h>
+#include <stdbool.h>
+
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+#include <rte_cycles.h>
+
+#include "rte_eth_bond_private.h"
+
+#ifdef RTE_LIBRTE_BOND_DEBUG_8023AD
+#define MODE4_DEBUG(fmt, ...) RTE_LOG(DEBUG, PMD, "%6u [Port %u: %s] " fmt, \
+ bond_dbg_get_time_diff_ms(), slave_id, \
+ __func__, ##__VA_ARGS__)
+
+static uint64_t start_time;
+
+static unsigned
+bond_dbg_get_time_diff_ms(void)
+{
+ uint64_t now;
+
+ now = rte_rdtsc();
+ if (start_time == 0)
+ start_time = now;
+
+ return ((now - start_time) * 1000) / rte_get_tsc_hz();
+}
+
+static void
+bond_print_lacp(struct lacpdu *l)
+{
+ char a_address[18];
+ char p_address[18];
+ char a_state[256] = { 0 };
+ char p_state[256] = { 0 };
+
+ static const char * const state_labels[] = {
+ "ACT", "TIMEOUT", "AGG", "SYNC", "COL", "DIST", "DEF", "EXP"
+ };
+
+ int a_len = 0;
+ int p_len = 0;
+ uint8_t i;
+ uint8_t *addr;
+
+ addr = l->actor.port_params.system.addr_bytes;
+ snprintf(a_address, sizeof(a_address), "%02X:%02X:%02X:%02X:%02X:%02X",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+ addr = l->partner.port_params.system.addr_bytes;
+ snprintf(p_address, sizeof(p_address), "%02X:%02X:%02X:%02X:%02X:%02X",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+ for (i = 0; i < 8; i++) {
+ if ((l->actor.state >> i) & 1) {
+ a_len += snprintf(&a_state[a_len], RTE_DIM(a_state) - a_len, "%s ",
+ state_labels[i]);
+ }
+
+ if ((l->partner.state >> i) & 1) {
+ p_len += snprintf(&p_state[p_len], RTE_DIM(p_state) - p_len, "%s ",
+ state_labels[i]);
+ }
+ }
+
+ if (a_len && a_state[a_len-1] == ' ')
+ a_state[a_len-1] = '\0';
+
+ if (p_len && p_state[p_len-1] == ' ')
+ p_state[p_len-1] = '\0';
+
+ RTE_LOG(DEBUG, PMD, "LACP: {\n"\
+ " subtype= %02X\n"\
+ " ver_num=%02X\n"\
+ " actor={ tlv=%02X, len=%02X\n"\
+ " pri=%04X, system=%s, key=%04X, p_pri=%04X p_num=%04X\n"\
+ " state={ %s }\n"\
+ " }\n"\
+ " partner={ tlv=%02X, len=%02X\n"\
+ " pri=%04X, system=%s, key=%04X, p_pri=%04X p_num=%04X\n"\
+ " state={ %s }\n"\
+ " }\n"\
+ " collector={info=%02X, length=%02X, max_delay=%04X\n, " \
+ "type_term=%02X, terminator_length = %02X}\n",\
+ l->subtype,\
+ l->version_number,\
+ l->actor.tlv_type_info,\
+ l->actor.info_length,\
+ l->actor.port_params.system_priority,\
+ a_address,\
+ l->actor.port_params.key,\
+ l->actor.port_params.port_priority,\
+ l->actor.port_params.port_number,\
+ a_state,\
+ l->partner.tlv_type_info,\
+ l->partner.info_length,\
+ l->partner.port_params.system_priority,\
+ p_address,\
+ l->partner.port_params.key,\
+ l->partner.port_params.port_priority,\
+ l->partner.port_params.port_number,\
+ p_state,\
+ l->tlv_type_collector_info,\
+ l->collector_info_length,\
+ l->collector_max_delay,\
+ l->tlv_type_terminator,\
+ l->terminator_length);
+
+}
+#define BOND_PRINT_LACP(lacpdu) bond_print_lacp(lacpdu)
+#else
+#define BOND_PRINT_LACP(lacpdu) do { } while (0)
+#define MODE4_DEBUG(fmt, ...) do { } while (0)
+#endif
+
+static const struct ether_addr lacp_mac_addr = {
+ .addr_bytes = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x02 }
+};
+
+struct port mode_8023ad_ports[RTE_MAX_ETHPORTS];
+
+static void
+timer_cancel(uint64_t *timer)
+{
+ *timer = 0;
+}
+
+static void
+timer_set(uint64_t *timer, uint64_t timeout)
+{
+ *timer = rte_rdtsc() + timeout;
+}
+
+/* Forces given timer to be in expired state. */
+static void
+timer_force_expired(uint64_t *timer)
+{
+ *timer = rte_rdtsc();
+}
+
+static bool
+timer_is_stopped(uint64_t *timer)
+{
+ return *timer == 0;
+}
+
+static bool
+timer_is_expired(uint64_t *timer)
+{
+ return *timer < rte_rdtsc();
+}
+
+/* Timer is in running state if it is not stopped nor expired */
+static bool
+timer_is_running(uint64_t *timer)
+{
+ return !timer_is_stopped(timer) && !timer_is_expired(timer);
+}
+
+static void
+set_warning_flags(struct port *port, uint16_t flags)
+{
+ int retval;
+ uint16_t old;
+ uint16_t new_flag = 0;
+
+ do {
+ old = port->warnings_to_show;
+ new_flag = old | flags;
+ retval = rte_atomic16_cmpset(&port->warnings_to_show, old, new_flag);
+ } while (unlikely(retval == 0));
+}
+
+static void
+show_warnings(uint8_t slave_id)
+{
+ struct port *port = &mode_8023ad_ports[slave_id];
+ uint8_t warnings;
+
+ do {
+ warnings = port->warnings_to_show;
+ } while (rte_atomic16_cmpset(&port->warnings_to_show, warnings, 0) == 0);
+
+ if (!warnings)
+ return;
+
+ if (!timer_is_expired(&port->warning_timer))
+ return;
+
+
+ timer_set(&port->warning_timer, BOND_8023AD_WARNINGS_PERIOD_MS *
+ rte_get_tsc_hz() / 1000);
+
+ if (warnings & WRN_RX_QUEUE_FULL) {
+ RTE_LOG(DEBUG, PMD,
+ "Slave %u: failed to enqueue LACP packet into RX ring.\n"
+ "Receive and transmit functions must be invoked on bonded\n"
+ "interface at least 10 times per second or LACP will not\n"
+ "work correctly\n", slave_id);
+ }
+
+ if (warnings & WRN_TX_QUEUE_FULL) {
+ RTE_LOG(DEBUG, PMD,
+ "Slave %u: failed to enqueue LACP packet into TX ring.\n"
+ "Receive and transmit functions must be invoked on bonded\n"
+ "interface at least 10 times per second or LACP will not\n"
+ "work correctly\n", slave_id);
+ }
+
+ if (warnings & WRN_RX_MARKER_TO_FAST)
+ RTE_LOG(INFO, PMD, "Slave %u: marker to early - ignoring.\n", slave_id);
+
+ if (warnings & WRN_UNKNOWN_SLOW_TYPE) {
+ RTE_LOG(INFO, PMD,
+ "Slave %u: ignoring unknown slow protocol frame type", slave_id);
+ }
+
+ if (warnings & WRN_UNKNOWN_MARKER_TYPE)
+ RTE_LOG(INFO, PMD, "Slave %u: ignoring unknown marker type", slave_id);
+
+ if (warnings & WRN_NOT_LACP_CAPABLE)
+ MODE4_DEBUG("Port %u is not LACP capable!\n", slave_id);
+}
+
+static void
+record_default(struct port *port)
+{
+ /* Record default parametes for partner. Partner admin parameters
+ * are not implemented so set them to arbitrary default (last known) and
+ * mark actor that parner is in defaulted state. */
+ port->partner_state = STATE_LACP_ACTIVE;
+ ACTOR_STATE_SET(port, DEFAULTED);
+}
+
+/** Function handles rx state machine.
+ *
+ * This function implements Receive State Machine from point 5.4.12 in
+ * 802.1AX documentation. It should be called periodically.
+ *
+ * @param lacpdu LACPDU received.
+ * @param port Port on which LACPDU was received.
+ */
+static void
+rx_machine(struct bond_dev_private *internals, uint8_t slave_id,
+ struct lacpdu *lacp)
+{
+ struct port *agg, *port = &mode_8023ad_ports[slave_id];
+ uint64_t timeout;
+
+ if (SM_FLAG(port, BEGIN)) {
+ /* Initialize stuff */
+ MODE4_DEBUG("-> INITIALIZE\n");
+ SM_FLAG_CLR(port, MOVED);
+ port->selected = UNSELECTED;
+
+ record_default(port);
+
+ ACTOR_STATE_CLR(port, EXPIRED);
+ timer_cancel(&port->current_while_timer);
+
+ /* DISABLED: On initialization partner is out of sync */
+ PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+
+ /* LACP DISABLED stuff if LACP not enabled on this port */
+ if (!SM_FLAG(port, LACP_ENABLED))
+ PARTNER_STATE_CLR(port, AGGREGATION);
+ else
+ PARTNER_STATE_SET(port, AGGREGATION);
+ }
+
+ if (!SM_FLAG(port, LACP_ENABLED)) {
+ /* Update parameters only if state changed */
+ if (!timer_is_stopped(&port->current_while_timer)) {
+ port->selected = UNSELECTED;
+ record_default(port);
+ PARTNER_STATE_CLR(port, AGGREGATION);
+ ACTOR_STATE_CLR(port, EXPIRED);
+ timer_cancel(&port->current_while_timer);
+ }
+ return;
+ }
+
+ if (lacp) {
+ MODE4_DEBUG("LACP -> CURRENT\n");
+ BOND_PRINT_LACP(lacp);
+ /* Update selected flag. If partner parameters are defaulted assume they
+ * are match. If not defaulted compare LACP actor with ports parner
+ * params. */
+ if (!ACTOR_STATE(port, DEFAULTED) &&
+ (ACTOR_STATE(port, AGGREGATION) != PARTNER_STATE(port, AGGREGATION)
+ || memcmp(&port->partner, &lacp->actor.port_params,
+ sizeof(port->partner)) != 0)) {
+ MODE4_DEBUG("selected <- UNSELECTED\n");
+ port->selected = UNSELECTED;
+ }
+
+ /* Record this PDU actor params as partner params */
+ memcpy(&port->partner, &lacp->actor.port_params,
+ sizeof(struct port_params));
+ port->partner_state = lacp->actor.state;
+
+ /* Partner parameters are not defaulted any more */
+ ACTOR_STATE_CLR(port, DEFAULTED);
+
+ /* If LACP partner params match this port actor params */
+ agg = &mode_8023ad_ports[port->aggregator_port_id];
+ bool match = port->actor.system_priority ==
+ lacp->partner.port_params.system_priority &&
+ is_same_ether_addr(&agg->actor.system,
+ &lacp->partner.port_params.system) &&
+ port->actor.port_priority ==
+ lacp->partner.port_params.port_priority &&
+ port->actor.port_number ==
+ lacp->partner.port_params.port_number;
+
+ /* Update NTT if partners information are outdated (xored and masked
+ * bits are set)*/
+ uint8_t state_mask = STATE_LACP_ACTIVE | STATE_LACP_SHORT_TIMEOUT |
+ STATE_SYNCHRONIZATION | STATE_AGGREGATION;
+
+ if (((port->actor_state ^ lacp->partner.state) & state_mask) ||
+ match == false) {
+ SM_FLAG_SET(port, NTT);
+ }
+
+ /* If LACP partner params match this port actor params */
+ if (match == true && ACTOR_STATE(port, AGGREGATION) ==
+ PARTNER_STATE(port, AGGREGATION))
+ PARTNER_STATE_SET(port, SYNCHRONIZATION);
+ else if (!PARTNER_STATE(port, AGGREGATION) && ACTOR_STATE(port,
+ AGGREGATION))
+ PARTNER_STATE_SET(port, SYNCHRONIZATION);
+ else
+ PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+
+ if (ACTOR_STATE(port, LACP_SHORT_TIMEOUT))
+ timeout = internals->mode4.short_timeout;
+ else
+ timeout = internals->mode4.long_timeout;
+
+ timer_set(&port->current_while_timer, timeout);
+ ACTOR_STATE_CLR(port, EXPIRED);
+ return; /* No state change */
+ }
+
+ /* If CURRENT state timer is not running (stopped or expired)
+ * transit to EXPIRED state from DISABLED or CURRENT */
+ if (!timer_is_running(&port->current_while_timer)) {
+ ACTOR_STATE_SET(port, EXPIRED);
+ PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+ PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+ timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+ }
+}
+
+/**
+ * Function handles periodic tx state machine.
+ *
+ * Function implements Periodic Transmission state machine from point 5.4.13
+ * in 802.1AX documentation. It should be called periodically.
+ *
+ * @param port Port to handle state machine.
+ */
+static void
+periodic_machine(struct bond_dev_private *internals, uint8_t slave_id)
+{
+ struct port *port = &mode_8023ad_ports[slave_id];
+ /* Calculate if either site is LACP enabled */
+ uint64_t timeout;
+ uint8_t active = ACTOR_STATE(port, LACP_ACTIVE) ||
+ PARTNER_STATE(port, LACP_ACTIVE);
+
+ uint8_t is_partner_fast, was_partner_fast;
+ /* No periodic is on BEGIN, LACP DISABLE or when both sides are pasive */
+ if (SM_FLAG(port, BEGIN) || !SM_FLAG(port, LACP_ENABLED) || !active) {
+ timer_cancel(&port->periodic_timer);
+ timer_force_expired(&port->tx_machine_timer);
+ SM_FLAG_CLR(port, PARTNER_SHORT_TIMEOUT);
+
+ MODE4_DEBUG("-> NO_PERIODIC ( %s%s%s)\n",
+ SM_FLAG(port, BEGIN) ? "begind " : "",
+ SM_FLAG(port, LACP_ENABLED) ? "" : "LACP disabled ",
+ active ? "LACP active " : "LACP pasive ");
+ return;
+ }
+
+ is_partner_fast = PARTNER_STATE(port, LACP_SHORT_TIMEOUT);
+ was_partner_fast = SM_FLAG(port, PARTNER_SHORT_TIMEOUT);
+
+ /* If periodic timer is not started, transit from NO PERIODIC to FAST/SLOW.
+ * Other case: check if timer expire or partners settings changed. */
+ if (!timer_is_stopped(&port->periodic_timer)) {
+ if (timer_is_expired(&port->periodic_timer)) {
+ SM_FLAG_SET(port, NTT);
+ } else if (is_partner_fast != was_partner_fast) {
+ /* Partners timeout was slow and now it is fast -> send LACP.
+ * In other case (was fast and now it is slow) just switch
+ * timeout to slow without forcing send of LACP (because standard
+ * say so)*/
+ if (!is_partner_fast)
+ SM_FLAG_SET(port, NTT);
+ } else
+ return; /* Nothing changed */
+ }
+
+ /* Handle state transition to FAST/SLOW LACP timeout */
+ if (is_partner_fast) {
+ timeout = internals->mode4.fast_periodic_timeout;
+ SM_FLAG_SET(port, PARTNER_SHORT_TIMEOUT);
+ } else {
+ timeout = internals->mode4.slow_periodic_timeout;
+ SM_FLAG_CLR(port, PARTNER_SHORT_TIMEOUT);
+ }
+
+ timer_set(&port->periodic_timer, timeout);
+}
+
+/**
+ * Function handles mux state machine.
+ *
+ * Function implements Mux Machine from point 5.4.15 in 802.1AX documentation.
+ * It should be called periodically.
+ *
+ * @param port Port to handle state machine.
+ */
+static void
+mux_machine(struct bond_dev_private *internals, uint8_t slave_id)
+{
+ struct port *port = &mode_8023ad_ports[slave_id];
+
+ /* Save current state for later use */
+ const uint8_t state_mask = STATE_SYNCHRONIZATION | STATE_DISTRIBUTING |
+ STATE_COLLECTING;
+
+ /* Enter DETACHED state on BEGIN condition or from any other state if
+ * port was unselected */
+ if (SM_FLAG(port, BEGIN) ||
+ port->selected == UNSELECTED || (port->selected == STANDBY &&
+ (port->actor_state & state_mask) != 0)) {
+ /* detach mux from aggregator */
+ port->actor_state &= ~state_mask;
+ /* Set ntt to true if BEGIN condition or transition from any other state
+ * which is indicated that wait_while_timer was started */
+ if (SM_FLAG(port, BEGIN) ||
+ !timer_is_stopped(&port->wait_while_timer)) {
+ SM_FLAG_SET(port, NTT);
+ MODE4_DEBUG("-> DETACHED\n");
+ }
+ timer_cancel(&port->wait_while_timer);
+ }
+
+ if (timer_is_stopped(&port->wait_while_timer)) {
+ if (port->selected == SELECTED || port->selected == STANDBY) {
+ timer_set(&port->wait_while_timer,
+ internals->mode4.aggregate_wait_timeout);
+
+ MODE4_DEBUG("DETACHED -> WAITING\n");
+ }
+ /* Waiting state entered */
+ return;
+ }
+
+ /* Transit next state if port is ready */
+ if (!timer_is_expired(&port->wait_while_timer))
+ return;
+
+ if ((ACTOR_STATE(port, DISTRIBUTING) || ACTOR_STATE(port, COLLECTING)) &&
+ !PARTNER_STATE(port, SYNCHRONIZATION)) {
+ /* If in COLLECTING or DISTRIBUTING state and partner becomes out of
+ * sync transit to ATACHED state. */
+ ACTOR_STATE_CLR(port, DISTRIBUTING);
+ ACTOR_STATE_CLR(port, COLLECTING);
+ /* Clear actor sync to activate transit ATACHED in condition bellow */
+ ACTOR_STATE_CLR(port, SYNCHRONIZATION);
+ MODE4_DEBUG("Out of sync -> ATTACHED\n");
+ }
+
+ if (!ACTOR_STATE(port, SYNCHRONIZATION)) {
+ /* attach mux to aggregator */
+ RTE_VERIFY((port->actor_state & (STATE_COLLECTING |
+ STATE_DISTRIBUTING)) == 0);
+
+ ACTOR_STATE_SET(port, SYNCHRONIZATION);
+ SM_FLAG_SET(port, NTT);
+ MODE4_DEBUG("ATTACHED Entered\n");
+ } else if (!ACTOR_STATE(port, COLLECTING)) {
+ /* Start collecting if in sync */
+ if (PARTNER_STATE(port, SYNCHRONIZATION)) {
+ MODE4_DEBUG("ATTACHED -> COLLECTING\n");
+ ACTOR_STATE_SET(port, COLLECTING);
+ SM_FLAG_SET(port, NTT);
+ }
+ } else if (ACTOR_STATE(port, COLLECTING)) {
+ /* Check if partner is in COLLECTING state. If so this port can
+ * distribute frames to it */
+ if (!ACTOR_STATE(port, DISTRIBUTING)) {
+ if (PARTNER_STATE(port, COLLECTING)) {
+ /* Enable DISTRIBUTING if partner is collecting */
+ ACTOR_STATE_SET(port, DISTRIBUTING);
+ SM_FLAG_SET(port, NTT);
+ MODE4_DEBUG("COLLECTING -> DISTRIBUTING\n");
+ RTE_LOG(INFO, PMD,
+ "Bond %u: slave id %u distributing started.\n",
+ internals->port_id, slave_id);
+ }
+ } else {
+ if (!PARTNER_STATE(port, COLLECTING)) {
+ /* Disable DISTRIBUTING (enter COLLECTING state) if partner
+ * is not collecting */
+ ACTOR_STATE_CLR(port, DISTRIBUTING);
+ SM_FLAG_SET(port, NTT);
+ MODE4_DEBUG("DISTRIBUTING -> COLLECTING\n");
+ RTE_LOG(INFO, PMD,
+ "Bond %u: slave id %u distributing stopped.\n",
+ internals->port_id, slave_id);
+ }
+ }
+ }
+}
+
+/**
+ * Function handles transmit state machine.
+ *
+ * Function implements Transmit Machine from point 5.4.16 in 802.1AX
+ * documentation.
+ *
+ * @param port
+ */
+static void
+tx_machine(struct bond_dev_private *internals, uint8_t slave_id)
+{
+ struct port *agg, *port = &mode_8023ad_ports[slave_id];
+
+ struct rte_mbuf *lacp_pkt = NULL;
+ struct lacpdu_header *hdr;
+ struct lacpdu *lacpdu;
+
+ /* If periodic timer is not running periodic machine is in NO PERIODIC and
+ * acording to 802.3ax standard tx machine should not transmit any frames
+ * and set ntt to false. */
+ if (timer_is_stopped(&port->periodic_timer))
+ SM_FLAG_CLR(port, NTT);
+
+ if (!SM_FLAG(port, NTT))
+ return;
+
+ if (!timer_is_expired(&port->tx_machine_timer))
+ return;
+
+ lacp_pkt = rte_pktmbuf_alloc(port->mbuf_pool);
+ if (lacp_pkt == NULL) {
+ RTE_LOG(ERR, PMD, "Failed to allocate LACP packet from pool\n");
+ return;
+ }
+
+ lacp_pkt->data_len = sizeof(*hdr);
+ lacp_pkt->pkt_len = sizeof(*hdr);
+
+ hdr = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
+
+ /* Source and destination MAC */
+ ether_addr_copy(&lacp_mac_addr, &hdr->eth_hdr.d_addr);
+ rte_eth_macaddr_get(slave_id, &hdr->eth_hdr.s_addr);
+ hdr->eth_hdr.ether_type = rte_cpu_to_be_16(ETHER_TYPE_SLOW);
+
+ lacpdu = &hdr->lacpdu;
+ memset(lacpdu, 0, sizeof(*lacpdu));
+
+ /* Initialize LACP part */
+ lacpdu->subtype = SLOW_SUBTYPE_LACP;
+ lacpdu->version_number = 1;
+
+ /* ACTOR */
+ lacpdu->actor.tlv_type_info = TLV_TYPE_ACTOR_INFORMATION;
+ lacpdu->actor.info_length = sizeof(struct lacpdu_actor_partner_params);
+ memcpy(&hdr->lacpdu.actor.port_params, &port->actor,
+ sizeof(port->actor));
+ agg = &mode_8023ad_ports[port->aggregator_port_id];
+ ether_addr_copy(&agg->actor.system, &hdr->lacpdu.actor.port_params.system);
+ lacpdu->actor.state = port->actor_state;
+
+ /* PARTNER */
+ lacpdu->partner.tlv_type_info = TLV_TYPE_PARTNER_INFORMATION;
+ lacpdu->partner.info_length = sizeof(struct lacpdu_actor_partner_params);
+ memcpy(&lacpdu->partner.port_params, &port->partner,
+ sizeof(struct port_params));
+ lacpdu->partner.state = port->partner_state;
+
+ /* Other fields */
+ lacpdu->tlv_type_collector_info = TLV_TYPE_COLLECTOR_INFORMATION;
+ lacpdu->collector_info_length = 0x10;
+ lacpdu->collector_max_delay = 0;
+
+ lacpdu->tlv_type_terminator = TLV_TYPE_TERMINATOR_INFORMATION;
+ lacpdu->terminator_length = 0;
+
+ if (rte_ring_enqueue(port->tx_ring, lacp_pkt) == -ENOBUFS) {
+ /* If TX ring full, drop packet and free message. Retransmission
+ * will happen in next function call. */
+ rte_pktmbuf_free(lacp_pkt);
+ set_warning_flags(port, WRN_TX_QUEUE_FULL);
+ return;
+ }
+
+ MODE4_DEBUG("sending LACP frame\n");
+ BOND_PRINT_LACP(lacpdu);
+
+ timer_set(&port->tx_machine_timer, internals->mode4.tx_period_timeout);
+ SM_FLAG_CLR(port, NTT);
+}
+
+/**
+ * Function assigns port to aggregator.
+ *
+ * @param bond_dev_private Pointer to bond_dev_private structure.
+ * @param port_pos Port to assign.
+ */
+static void
+selection_logic(struct bond_dev_private *internals, uint8_t slave_id)
+{
+ struct port *agg, *port;
+ uint8_t slaves_count, new_agg_id, i;
+ uint8_t *slaves;
+
+ slaves = internals->active_slaves;
+ slaves_count = internals->active_slave_count;
+ port = &mode_8023ad_ports[slave_id];
+
+ /* Search for aggregator suitable for this port */
+ for (i = 0; i < slaves_count; ++i) {
+ agg = &mode_8023ad_ports[slaves[i]];
+ /* Skip ports that are not aggreagators */
+ if (agg->aggregator_port_id != slaves[i])
+ continue;
+
+ /* Actors system ID is not checked since all slave device have the same
+ * ID (MAC address). */
+ if ((agg->actor.key == port->actor.key &&
+ agg->partner.system_priority == port->partner.system_priority &&
+ is_same_ether_addr(&agg->partner.system, &port->partner.system) == 1
+ && (agg->partner.key == port->partner.key)) &&
+ is_zero_ether_addr(&port->partner.system) != 1 &&
+ (agg->actor.key &
+ rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY)) != 0) {
+
+ break;
+ }
+ }
+
+ /* By default, port uses it self as agregator */
+ if (i == slaves_count)
+ new_agg_id = slave_id;
+ else
+ new_agg_id = slaves[i];
+
+ if (new_agg_id != port->aggregator_port_id) {
+ port->aggregator_port_id = new_agg_id;
+
+ MODE4_DEBUG("-> SELECTED: ID=%3u\n"
+ "\t%s aggregator ID=%3u\n",
+ port->aggregator_port_id,
+ port->aggregator_port_id == slave_id ?
+ "aggregator not found, using default" : "aggregator found",
+ port->aggregator_port_id);
+ }
+
+ port->selected = SELECTED;
+}
+
+/* Function maps DPDK speed to bonding speed stored in key field */
+static uint16_t
+link_speed_key(uint16_t speed) {
+ uint16_t key_speed;
+
+ switch (speed) {
+ case ETH_LINK_SPEED_AUTONEG:
+ key_speed = 0x00;
+ break;
+ case ETH_LINK_SPEED_10:
+ key_speed = BOND_LINK_SPEED_KEY_10M;
+ break;
+ case ETH_LINK_SPEED_100:
+ key_speed = BOND_LINK_SPEED_KEY_100M;
+ break;
+ case ETH_LINK_SPEED_1000:
+ key_speed = BOND_LINK_SPEED_KEY_1000M;
+ break;
+ case ETH_LINK_SPEED_10G:
+ key_speed = BOND_LINK_SPEED_KEY_10G;
+ break;
+ case ETH_LINK_SPEED_20G:
+ key_speed = BOND_LINK_SPEED_KEY_20G;
+ break;
+ case ETH_LINK_SPEED_40G:
+ key_speed = BOND_LINK_SPEED_KEY_40G;
+ break;
+ default:
+ /* Unknown speed*/
+ key_speed = 0xFFFF;
+ }
+
+ return key_speed;
+}
+
+static void
+bond_mode_8023ad_periodic_cb(void *arg)
+{
+ struct rte_eth_dev *bond_dev = arg;
+ struct bond_dev_private *internals = bond_dev->data->dev_private;
+ struct port *port;
+ struct rte_eth_link link_info;
+ struct ether_addr slave_addr;
+
+ void *pkt = NULL;
+ uint16_t i, slave_id;
+
+
+ /* Update link status on each port */
+ for (i = 0; i < internals->active_slave_count; i++) {
+ uint16_t key;
+
+ slave_id = internals->active_slaves[i];
+ rte_eth_link_get(slave_id, &link_info);
+ rte_eth_macaddr_get(slave_id, &slave_addr);
+
+ if (link_info.link_status != 0) {
+ key = link_speed_key(link_info.link_speed) << 1;
+ if (link_info.link_duplex == ETH_LINK_FULL_DUPLEX)
+ key |= BOND_LINK_FULL_DUPLEX_KEY;
+ } else
+ key = 0;
+
+ port = &mode_8023ad_ports[slave_id];
+
+ key = rte_cpu_to_be_16(key);
+ if (key != port->actor.key) {
+ if (!(key & rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY)))
+ set_warning_flags(port, WRN_NOT_LACP_CAPABLE);
+
+ port->actor.key = key;
+ SM_FLAG_SET(port, NTT);
+ }
+
+ if (!is_same_ether_addr(&port->actor.system, &slave_addr)) {
+ ether_addr_copy(&slave_addr, &port->actor.system);
+ if (port->aggregator_port_id == slave_id)
+ SM_FLAG_SET(port, NTT);
+ }
+ }
+
+ for (i = 0; i < internals->active_slave_count; i++) {
+ slave_id = internals->active_slaves[i];
+ port = &mode_8023ad_ports[slave_id];
+
+ if ((port->actor.key &
+ rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY)) == 0) {
+
+ SM_FLAG_SET(port, BEGIN);
+
+ /* LACP is disabled on half duples or link is down */
+ if (SM_FLAG(port, LACP_ENABLED)) {
+ /* If port was enabled set it to BEGIN state */
+ SM_FLAG_CLR(port, LACP_ENABLED);
+ ACTOR_STATE_CLR(port, DISTRIBUTING);
+ ACTOR_STATE_CLR(port, COLLECTING);
+ }
+
+ /* Skip this port processing */
+ continue;
+ }
+
+ SM_FLAG_SET(port, LACP_ENABLED);
+
+ /* Find LACP packet to this port. Do not check subtype, it is done in
+ * function that queued packet */
+ if (rte_ring_dequeue(port->rx_ring, &pkt) == 0) {
+ struct rte_mbuf *lacp_pkt = pkt;
+ struct lacpdu_header *lacp;
+
+ lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
+ RTE_VERIFY(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
+
+ /* This is LACP frame so pass it to rx_machine */
+ rx_machine(internals, slave_id, &lacp->lacpdu);
+ rte_pktmbuf_free(lacp_pkt);
+ } else
+ rx_machine(internals, slave_id, NULL);
+
+ periodic_machine(internals, slave_id);
+ mux_machine(internals, slave_id);
+ tx_machine(internals, slave_id);
+ selection_logic(internals, slave_id);
+
+ SM_FLAG_CLR(port, BEGIN);
+ show_warnings(slave_id);
+ }
+
+ rte_eal_alarm_set(internals->mode4.update_timeout_us,
+ bond_mode_8023ad_periodic_cb, arg);
+}
+
+void
+bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev, uint8_t slave_id)
+{
+ struct bond_dev_private *internals = bond_dev->data->dev_private;
+
+ struct port *port = &mode_8023ad_ports[slave_id];
+ struct port_params initial = {
+ .system = { { 0 } },
+ .system_priority = rte_cpu_to_be_16(0xFFFF),
+ .key = rte_cpu_to_be_16(BOND_LINK_FULL_DUPLEX_KEY),
+ .port_priority = rte_cpu_to_be_16(0x00FF),
+ .port_number = 0,
+ };
+
+ char mem_name[RTE_ETH_NAME_MAX_LEN];
+ uint8_t socket_id;
+ unsigned element_size;
+
+ /* Given slave mus not be in active list */
+ RTE_VERIFY(find_slave_by_id(internals->active_slaves,
+ internals->active_slave_count, slave_id) == internals->active_slave_count);
+
+ memcpy(&port->actor, &initial, sizeof(struct port_params));
+ /* Standard requires that port ID must be grater than 0.
+ * Add 1 do get corresponding port_number */
+ port->actor.port_number = rte_cpu_to_be_16((uint16_t)slave_id + 1);
+
+ memcpy(&port->partner, &initial, sizeof(struct port_params));
+
+ /* default states */
+ port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
+ port->partner_state = STATE_LACP_ACTIVE;
+ port->sm_flags = SM_FLAGS_BEGIN;
+
+ /* use this port as agregator */
+ port->aggregator_port_id = slave_id;
+ rte_eth_promiscuous_enable(slave_id);
+
+ timer_cancel(&port->warning_timer);
+
+ if (port->mbuf_pool != NULL)
+ return;
+
+ RTE_VERIFY(port->rx_ring == NULL);
+ RTE_VERIFY(port->tx_ring == NULL);
+ socket_id = rte_eth_devices[slave_id].pci_dev->numa_node;
+
+ element_size = sizeof(struct slow_protocol_frame) + sizeof(struct rte_mbuf)
+ + RTE_PKTMBUF_HEADROOM;
+
+ /* How big memory pool should be? If driver will not
+ * free packets quick enough there will be ENOMEM in tx_machine.
+ * For now give 511 pkts * max number of queued TX packets per slave.
+ * Hope it will be enough. */
+ snprintf(mem_name, RTE_DIM(mem_name), "slave_port%u_pool", slave_id);
+ port->mbuf_pool = rte_mempool_create(mem_name,
+ BOND_MODE_8023AX_SLAVE_TX_PKTS * 512 - 1,
+ element_size,
+ RTE_MEMPOOL_CACHE_MAX_SIZE >= 32 ? 32 : RTE_MEMPOOL_CACHE_MAX_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init,
+ NULL, rte_pktmbuf_init, NULL, socket_id, MEMPOOL_F_NO_SPREAD);
+
+ /* Any memory allocation failure in initalization is critical because
+ * resources can't be free, so reinitialization is impossible. */
+ if (port->mbuf_pool == NULL) {
+ rte_panic("Slave %u: Failed to create memory pool '%s': %s\n",
+ slave_id, mem_name, rte_strerror(rte_errno));
+ }
+
+ snprintf(mem_name, RTE_DIM(mem_name), "slave_%u_rx", slave_id);
+ port->rx_ring = rte_ring_create(mem_name,
+ rte_align32pow2(BOND_MODE_8023AX_SLAVE_RX_PKTS), socket_id, 0);
+
+ if (port->rx_ring == NULL) {
+ rte_panic("Slave %u: Failed to create rx ring '%s': %s\n", slave_id,
+ mem_name, rte_strerror(rte_errno));
+ }
+
+ /* TX ring is at least one pkt longer to make room for marker packet. */
+ snprintf(mem_name, RTE_DIM(mem_name), "slave_%u_tx", slave_id);
+ port->tx_ring = rte_ring_create(mem_name,
+ rte_align32pow2(BOND_MODE_8023AX_SLAVE_TX_PKTS + 1), socket_id, 0);
+
+ if (port->tx_ring == NULL) {
+ rte_panic("Slave %u: Failed to create tx ring '%s': %s\n", slave_id,
+ mem_name, rte_strerror(rte_errno));
+ }
+}
+
+int
+bond_mode_8023ad_deactivate_slave(struct rte_eth_dev *bond_dev,
+ uint8_t slave_id)
+{
+ struct bond_dev_private *internals = bond_dev->data->dev_private;
+ void *pkt = NULL;
+ struct port *port;
+ uint8_t i;
+
+ /* Given slave mus be in active list */
+ RTE_VERIFY(find_slave_by_id(internals->active_slaves,
+ internals->active_slave_count, slave_id) < internals->active_slave_count);
+
+ /* Exclude slave from transmit policy. If this slave is an aggregator
+ * make all aggregated slaves unselected to force sellection logic
+ * to select suitable aggregator for this port. */
+ for (i = 0; i < internals->active_slave_count; i++) {
+ port = &mode_8023ad_ports[internals->active_slaves[i]];
+ if (port->aggregator_port_id != slave_id)
+ continue;
+
+ port->selected = UNSELECTED;
+
+ /* Use default aggregator */
+ port->aggregator_port_id = internals->active_slaves[i];
+ }
+
+ port = &mode_8023ad_ports[slave_id];
+ port->selected = UNSELECTED;
+ port->actor_state &= ~(STATE_SYNCHRONIZATION | STATE_DISTRIBUTING |
+ STATE_COLLECTING);
+
+ while (rte_ring_dequeue(port->rx_ring, &pkt) == 0)
+ rte_pktmbuf_free((struct rte_mbuf *)pkt);
+
+ while (rte_ring_dequeue(port->tx_ring, &pkt) == 0)
+ rte_pktmbuf_free((struct rte_mbuf *)pkt);
+ return 0;
+}
+
+void
+bond_mode_8023ad_mac_address_update(struct rte_eth_dev *bond_dev)
+{
+ struct bond_dev_private *internals = bond_dev->data->dev_private;
+ struct ether_addr slave_addr;
+ struct port *slave, *agg_slave;
+ uint8_t slave_id, i, j;
+
+ bond_mode_8023ad_stop(bond_dev);
+
+ for (i = 0; i < internals->active_slave_count; i++) {
+ slave_id = internals->active_slaves[i];
+ slave = &mode_8023ad_ports[slave_id];
+ rte_eth_macaddr_get(slave_id, &slave_addr);
+
+ if (is_same_ether_addr(&slave_addr, &slave->actor.system))
+ continue;
+
+ ether_addr_copy(&slave_addr, &slave->actor.system);
+ /* Do nothing if this port is not an aggregator. In other case
+ * Set NTT flag on every port that use this aggregator. */
+ if (slave->aggregator_port_id != slave_id)
+ continue;
+
+ for (j = 0; j < internals->active_slave_count; j++) {
+ agg_slave = &mode_8023ad_ports[internals->active_slaves[j]];
+ if (agg_slave->aggregator_port_id == slave_id)
+ SM_FLAG_SET(agg_slave, NTT);
+ }
+ }
+
+ if (bond_dev->data->dev_started)
+ bond_mode_8023ad_start(bond_dev);
+}
+
+void
+bond_mode_8023ad_conf_get(struct rte_eth_dev *dev,
+ struct rte_eth_bond_8023ad_conf *conf)
+{
+ struct bond_dev_private *internals = dev->data->dev_private;
+ struct mode8023ad_private *mode4 = &internals->mode4;
+ uint64_t ms_ticks = rte_get_tsc_hz() / 1000;
+
+ conf->fast_periodic_ms = mode4->fast_periodic_timeout / ms_ticks;
+ conf->slow_periodic_ms = mode4->slow_periodic_timeout / ms_ticks;
+ conf->short_timeout_ms = mode4->short_timeout / ms_ticks;
+ conf->long_timeout_ms = mode4->long_timeout / ms_ticks;
+ conf->aggregate_wait_timeout_ms = mode4->aggregate_wait_timeout / ms_ticks;
+ conf->tx_period_ms = mode4->tx_period_timeout / ms_ticks;
+ conf->update_timeout_ms = mode4->update_timeout_us / 1000;
+}
+
+void
+bond_mode_8023ad_setup(struct rte_eth_dev *dev,
+ struct rte_eth_bond_8023ad_conf *conf)
+{
+ struct rte_eth_bond_8023ad_conf def_conf;
+ struct bond_dev_private *internals = dev->data->dev_private;
+ struct mode8023ad_private *mode4 = &internals->mode4;
+ uint64_t ms_ticks = rte_get_tsc_hz() / 1000;
+
+ if (conf == NULL) {
+ conf = &def_conf;
+ conf->fast_periodic_ms = BOND_8023AD_FAST_PERIODIC_MS;
+ conf->slow_periodic_ms = BOND_8023AD_SLOW_PERIODIC_MS;
+ conf->short_timeout_ms = BOND_8023AD_SHORT_TIMEOUT_MS;
+ conf->long_timeout_ms = BOND_8023AD_LONG_TIMEOUT_MS;
+ conf->aggregate_wait_timeout_ms = BOND_8023AD_AGGREGATE_WAIT_TIMEOUT_MS;
+ conf->tx_period_ms = BOND_8023AD_TX_MACHINE_PERIOD_MS;
+ conf->rx_marker_period_ms = BOND_8023AD_RX_MARKER_PERIOD_MS;
+ conf->update_timeout_ms = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS;
+ }
+
+ mode4->fast_periodic_timeout = conf->fast_periodic_ms * ms_ticks;
+ mode4->slow_periodic_timeout = conf->slow_periodic_ms * ms_ticks;
+ mode4->short_timeout = conf->short_timeout_ms * ms_ticks;
+ mode4->long_timeout = conf->long_timeout_ms * ms_ticks;
+ mode4->aggregate_wait_timeout = conf->aggregate_wait_timeout_ms * ms_ticks;
+ mode4->tx_period_timeout = conf->tx_period_ms * ms_ticks;
+ mode4->rx_marker_timeout = conf->rx_marker_period_ms * ms_ticks;
+ mode4->update_timeout_us = conf->update_timeout_ms * 1000;
+}
+
+int
+bond_mode_8023ad_enable(struct rte_eth_dev *bond_dev)
+{
+ struct bond_dev_private *internals = bond_dev->data->dev_private;
+ uint16_t i;
+
+ for (i = 0; i < internals->active_slave_count; i++)
+ bond_mode_8023ad_activate_slave(bond_dev, i);
+
+ return 0;
+}
+
+int
+bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
+{
+ return rte_eal_alarm_set(BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000,
+ &bond_mode_8023ad_periodic_cb, bond_dev);
+}
+
+void
+bond_mode_8023ad_stop(struct rte_eth_dev *bond_dev)
+{
+ rte_eal_alarm_cancel(&bond_mode_8023ad_periodic_cb, bond_dev);
+}
+
+void
+bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
+ uint8_t slave_id, struct rte_mbuf *pkt)
+{
+ struct mode8023ad_private *mode4 = &internals->mode4;
+ struct port *port = &mode_8023ad_ports[slave_id];
+ struct marker_header *m_hdr;
+ uint64_t marker_timer, old_marker_timer;
+ int retval;
+ uint8_t wrn, subtype;
+ /* If packet is a marker, we send response now by reusing given packet
+ * and update only source MAC, destination MAC is multicast so don't
+ * update it. Other frames will be handled later by state machines */
+ subtype = rte_pktmbuf_mtod(pkt,
+ struct slow_protocol_frame *)->slow_protocol.subtype;
+
+ if (subtype == SLOW_SUBTYPE_MARKER) {
+ m_hdr = rte_pktmbuf_mtod(pkt, struct marker_header *);
+
+ if (likely(m_hdr->marker.tlv_type_marker != MARKER_TLV_TYPE_INFO)) {
+ wrn = WRN_UNKNOWN_MARKER_TYPE;
+ goto free_out;
+ }
+
+ /* Setup marker timer. Do it in loop in case concurent access. */
+ do {
+ old_marker_timer = port->rx_marker_timer;
+ if (!timer_is_expired(&old_marker_timer)) {
+ wrn = WRN_RX_MARKER_TO_FAST;
+ goto free_out;
+ }
+
+ timer_set(&marker_timer, mode4->rx_marker_timeout);
+ retval = rte_atomic64_cmpset(&port->rx_marker_timer,
+ old_marker_timer, marker_timer);
+ } while (unlikely(retval == 0));
+
+ m_hdr->marker.tlv_type_marker = MARKER_TLV_TYPE_RESP;
+ rte_eth_macaddr_get(slave_id, &m_hdr->eth_hdr.s_addr);
+
+ if (unlikely(rte_ring_enqueue(port->tx_ring, pkt) == -ENOBUFS)) {
+ /* reset timer */
+ port->rx_marker_timer = 0;
+ wrn = WRN_TX_QUEUE_FULL;
+ goto free_out;
+ }
+ } else if (likely(subtype == SLOW_SUBTYPE_LACP)) {
+ if (unlikely(rte_ring_enqueue(port->rx_ring, pkt) == -ENOBUFS)) {
+ /* If RX fing full free lacpdu message and drop packet */
+ wrn = WRN_RX_QUEUE_FULL;
+ goto free_out;
+ }
+ } else {
+ wrn = WRN_UNKNOWN_SLOW_TYPE;
+ goto free_out;
+ }
+
+ return;
+
+free_out:
+ set_warning_flags(port, wrn);
+ rte_pktmbuf_free(pkt);
+}
+
+int
+rte_eth_bond_8023ad_conf_get(uint8_t port_id,
+ struct rte_eth_bond_8023ad_conf *conf)
+{
+ struct rte_eth_dev *bond_dev;
+
+ if (valid_bonded_port_id(port_id) != 0)
+ return -EINVAL;
+
+ if (conf == NULL)
+ return -EINVAL;
+
+ bond_dev = &rte_eth_devices[port_id];
+ bond_mode_8023ad_conf_get(bond_dev, conf);
+ return 0;
+}
+
+int
+rte_eth_bond_8023ad_setup(uint8_t port_id,
+ struct rte_eth_bond_8023ad_conf *conf)
+{
+ struct rte_eth_dev *bond_dev;
+
+ if (valid_bonded_port_id(port_id) != 0)
+ return -EINVAL;
+
+ if (conf != NULL) {
+ /* Basic sanity check */
+ if (conf->slow_periodic_ms == 0 ||
+ conf->fast_periodic_ms >= conf->slow_periodic_ms ||
+ conf->long_timeout_ms == 0 ||
+ conf->short_timeout_ms >= conf->long_timeout_ms ||
+ conf->aggregate_wait_timeout_ms == 0 ||
+ conf->tx_period_ms == 0 ||
+ conf->rx_marker_period_ms == 0 ||
+ conf->update_timeout_ms == 0) {
+ RTE_LOG(ERR, PMD, "given mode 4 configuration is invalid\n");
+ return -EINVAL;
+ }
+ }
+
+ bond_dev = &rte_eth_devices[port_id];
+ bond_mode_8023ad_setup(bond_dev, conf);
+
+ return 0;
+}
+
+int
+rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
+ struct rte_eth_bond_8023ad_slave_info *info)
+{
+ struct rte_eth_dev *bond_dev;
+ struct bond_dev_private *internals;
+ struct port *port;
+
+ if (info == NULL || valid_bonded_port_id(port_id) != 0 ||
+ rte_eth_bond_mode_get(port_id) != BONDING_MODE_8023AD)
+ return -EINVAL;
+
+ bond_dev = &rte_eth_devices[port_id];
+
+ internals = bond_dev->data->dev_private;
+ if (find_slave_by_id(internals->active_slaves,
+ internals->active_slave_count, slave_id) ==
+ internals->active_slave_count)
+ return -EINVAL;
+
+ port = &mode_8023ad_ports[slave_id];
+ info->selected = port->selected;
+
+ info->actor_state = port->actor_state;
+ rte_memcpy(&info->actor, &port->actor, sizeof(port->actor));
+
+ info->partner_state = port->partner_state;
+ rte_memcpy(&info->partner, &port->partner, sizeof(port->partner));
+
+ info->agg_port_id = port->aggregator_port_id;
+ return 0;
+}
diff --git a/lib/librte_pmd_bond/rte_eth_bond_8023ad.h b/lib/librte_pmd_bond/rte_eth_bond_8023ad.h
new file mode 100644
index 0000000..e655036
--- /dev/null
+++ b/lib/librte_pmd_bond/rte_eth_bond_8023ad.h
@@ -0,0 +1,214 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_ETH_BOND_8023AD_H_
+#define RTE_ETH_BOND_8023AD_H_
+
+#include <rte_ether.h>
+
+/**
+ * Actor/partner states
+ */
+#define STATE_LACP_ACTIVE 0x01
+#define STATE_LACP_SHORT_TIMEOUT 0x02
+#define STATE_AGGREGATION 0x04
+#define STATE_SYNCHRONIZATION 0x08
+#define STATE_COLLECTING 0x10
+#define STATE_DISTRIBUTING 0x20
+/** Partners parameters are defaulted */
+#define STATE_DEFAULTED 0x40
+#define STATE_EXPIRED 0x80
+
+#define TLV_TYPE_ACTOR_INFORMATION 0x01
+#define TLV_TYPE_PARTNER_INFORMATION 0x02
+#define TLV_TYPE_COLLECTOR_INFORMATION 0x03
+#define TLV_TYPE_TERMINATOR_INFORMATION 0x00
+
+#define SLOW_SUBTYPE_LACP 0x01
+#define SLOW_SUBTYPE_MARKER 0x02
+
+#define MARKER_TLV_TYPE_INFO 0x01
+#define MARKER_TLV_TYPE_RESP 0x02
+
+enum rte_bond_8023ad_selection {
+ UNSELECTED,
+ STANDBY,
+ SELECTED
+};
+
+/** Generic slow protocol structure */
+struct slow_protocol {
+ uint8_t subtype;
+ uint8_t reserved_119[119];
+} __attribute__((__packed__));
+
+/** Generic slow protocol frame type structure */
+struct slow_protocol_frame {
+ struct ether_hdr eth_hdr;
+ struct slow_protocol slow_protocol;
+} __attribute__((__packed__));
+
+struct port_params {
+ uint16_t system_priority;
+ /**< System priority (unused in current implementation) */
+ struct ether_addr system;
+ /**< System ID - Slave MAC address, same as bonding MAC address */
+ uint16_t key;
+ /**< Speed information (implementation dependednt) and duplex. */
+ uint16_t port_priority;
+ /**< Priority of this (unused in current implementation) */
+ uint16_t port_number;
+ /**< Port number. It corresponds to slave port id. */
+} __attribute__((__packed__));
+
+struct lacpdu_actor_partner_params {
+ uint8_t tlv_type_info;
+ uint8_t info_length;
+ struct port_params port_params;
+ uint8_t state;
+ uint8_t reserved_3[3];
+} __attribute__((__packed__));
+
+/** LACPDU structure (5.4.2 in 802.1AX documentation). */
+struct lacpdu {
+ uint8_t subtype;
+ uint8_t version_number;
+
+ struct lacpdu_actor_partner_params actor;
+ struct lacpdu_actor_partner_params partner;
+
+ uint8_t tlv_type_collector_info;
+ uint8_t collector_info_length;
+ uint16_t collector_max_delay;
+ uint8_t reserved_12[12];
+
+ uint8_t tlv_type_terminator;
+ uint8_t terminator_length;
+ uint8_t reserved_50[50];
+} __attribute__((__packed__));
+
+/** LACPDU frame: Contains ethernet header and LACPDU. */
+struct lacpdu_header {
+ struct ether_hdr eth_hdr;
+ struct lacpdu lacpdu;
+} __attribute__((__packed__));
+
+struct marker {
+ uint8_t subtype;
+ uint8_t version_number;
+
+ uint8_t tlv_type_marker;
+ uint8_t info_length;
+ uint16_t requester_port;
+ struct ether_addr requester_system;
+ uint32_t requester_transaction_id;
+ uint8_t reserved_2[2];
+
+ uint8_t tlv_type_terminator;
+ uint8_t terminator_length;
+ uint8_t reserved_90[90];
+} __attribute__((__packed__));
+
+struct marker_header {
+ struct ether_hdr eth_hdr;
+ struct marker marker;
+} __attribute__((__packed__));
+
+struct rte_eth_bond_8023ad_conf {
+ uint32_t fast_periodic_ms;
+ uint32_t slow_periodic_ms;
+ uint32_t short_timeout_ms;
+ uint32_t long_timeout_ms;
+ uint32_t aggregate_wait_timeout_ms;
+ uint32_t tx_period_ms;
+ uint32_t rx_marker_period_ms;
+ uint32_t update_timeout_ms;
+};
+
+struct rte_eth_bond_8023ad_slave_info {
+ enum rte_bond_8023ad_selection selected;
+ uint8_t actor_state;
+ struct port_params actor;
+ uint8_t partner_state;
+ struct port_params partner;
+ uint8_t agg_port_id;
+};
+
+/**
+ * @internal
+ *
+ * Function returns current configuration of 802.3AX mode.
+ *
+ * @param port_id Bonding device id
+ * @param conf Pointer to timeout structure.
+ *
+ * @return
+ * 0 - if ok
+ * -EINVAL if conf is NULL
+ */
+int
+rte_eth_bond_8023ad_conf_get(uint8_t port_id,
+ struct rte_eth_bond_8023ad_conf *conf);
+
+/**
+ * @internal
+ *
+ * Function set new configuration of 802.3AX mode.
+ *
+ * @param port_id Bonding device id
+ * @param conf Configuration, if NULL set default configuration.
+ * @return
+ * 0 - if ok
+ * -EINVAL if configuration is invalid.
+ */
+int
+rte_eth_bond_8023ad_setup(uint8_t port_id,
+ struct rte_eth_bond_8023ad_conf *conf);
+
+/**
+ * @internal
+ *
+ * Function returns current state of given slave device.
+ *
+ * @param slave_id Port id of valid slave.
+ * @param conf buffer for configuration
+ * @return
+ * 0 - if ok
+ * -EINVAL if conf is NULL or slave id is invalid (not a slave of given
+ * bonded device or is not inactive).
+ */
+int
+rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
+ struct rte_eth_bond_8023ad_slave_info *conf);
+
+#endif /* RTE_ETH_BOND_8023AD_H_ */
diff --git a/lib/librte_pmd_bond/rte_eth_bond_8023ad_private.h b/lib/librte_pmd_bond/rte_eth_bond_8023ad_private.h
new file mode 100644
index 0000000..8adee70
--- /dev/null
+++ b/lib/librte_pmd_bond/rte_eth_bond_8023ad_private.h
@@ -0,0 +1,308 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_ETH_BOND_8023AD_PRIVATE_H_
+#define RTE_ETH_BOND_8023AD_PRIVATE_H_
+
+#include <stdint.h>
+
+#include <rte_ether.h>
+#include <rte_byteorder.h>
+#include <rte_atomic.h>
+
+#include "rte_eth_bond_8023ad.h"
+
+#define BOND_MODE_8023AX_UPDATE_TIMEOUT_MS 100
+/** Maximum number of packets to one slave queued in TX ring. */
+#define BOND_MODE_8023AX_SLAVE_RX_PKTS 3
+/** Maximum number of LACP packets from one slave queued in TX ring. */
+#define BOND_MODE_8023AX_SLAVE_TX_PKTS 1
+/**
+ * Timeouts deffinitions (5.4.4 in 802.1AX documentation).
+ */
+#define BOND_8023AD_FAST_PERIODIC_MS 900
+#define BOND_8023AD_SLOW_PERIODIC_MS 29000
+#define BOND_8023AD_SHORT_TIMEOUT_MS 3000
+#define BOND_8023AD_LONG_TIMEOUT_MS 90000
+#define BOND_8023AD_CHURN_DETECTION_TIMEOUT_MS 60000
+#define BOND_8023AD_AGGREGATE_WAIT_TIMEOUT_MS 2000
+#define BOND_8023AD_TX_MACHINE_PERIOD_MS 500
+#define BOND_8023AD_RX_MARKER_PERIOD_MS 2000
+
+/**
+ * Interval of showing warning message from state machines. All messages will
+ * be held (and gathered together) to prevent flooding.
+ * This is no parto of 802.1AX standard.
+ */
+#define BOND_8023AD_WARNINGS_PERIOD_MS 1000
+
+
+
+/**
+ * State machine flags
+ */
+#define SM_FLAGS_BEGIN 0x0001
+#define SM_FLAGS_LACP_ENABLED 0x0002
+#define SM_FLAGS_ACTOR_CHURN 0x0004
+#define SM_FLAGS_PARTNER_CHURN 0x0008
+#define SM_FLAGS_MOVED 0x0100
+#define SM_FLAGS_PARTNER_SHORT_TIMEOUT 0x0200
+#define SM_FLAGS_NTT 0x0400
+
+#define BOND_LINK_FULL_DUPLEX_KEY 0x01
+#define BOND_LINK_SPEED_KEY_10M 0x02
+#define BOND_LINK_SPEED_KEY_100M 0x04
+#define BOND_LINK_SPEED_KEY_1000M 0x08
+#define BOND_LINK_SPEED_KEY_10G 0x10
+#define BOND_LINK_SPEED_KEY_20G 0x11
+#define BOND_LINK_SPEED_KEY_40G 0x12
+
+#define WRN_RX_MARKER_TO_FAST 0x01
+#define WRN_UNKNOWN_SLOW_TYPE 0x02
+#define WRN_UNKNOWN_MARKER_TYPE 0x04
+#define WRN_NOT_LACP_CAPABLE 0x08
+#define WRN_RX_QUEUE_FULL 0x10
+#define WRN_TX_QUEUE_FULL 0x20
+
+#define CHECK_FLAGS(_variable, _f) ((_variable) & (_f))
+#define SET_FLAGS(_variable, _f) ((_variable) |= (_f))
+#define CLEAR_FLAGS(_variable, _f) ((_variable) &= ~(_f))
+
+#define SM_FLAG(_p, _f) (!!CHECK_FLAGS((_p)->sm_flags, SM_FLAGS_ ## _f))
+#define SM_FLAG_SET(_p, _f) SET_FLAGS((_p)->sm_flags, SM_FLAGS_ ## _f)
+#define SM_FLAG_CLR(_p, _f) CLEAR_FLAGS((_p)->sm_flags, SM_FLAGS_ ## _f)
+
+#define ACTOR_STATE(_p, _f) (!!CHECK_FLAGS((_p)->actor_state, STATE_ ## _f))
+#define ACTOR_STATE_SET(_p, _f) SET_FLAGS((_p)->actor_state, STATE_ ## _f)
+#define ACTOR_STATE_CLR(_p, _f) CLEAR_FLAGS((_p)->actor_state, STATE_ ## _f)
+
+#define PARTNER_STATE(_p, _f) (!!CHECK_FLAGS((_p)->partner_state, STATE_ ## _f))
+#define PARTNER_STATE_SET(_p, _f) SET_FLAGS((_p)->partner_state, STATE_ ## _f)
+#define PARTNER_STATE_CLR(_p, _f) CLEAR_FLAGS((_p)->partner_state, STATE_ ## _f)
+
+/** Variables associated with each port (5.4.7 in 802.1AX documentation). */
+struct port {
+ /**
+ * The operational values of the Actor's state parameters. Bitmask
+ * of port states.
+ */
+ uint8_t actor_state;
+
+ /** The operational Actor's port parameters */
+ struct port_params actor;
+
+ /**
+ * The operational value of the Actor's view of the current values of
+ * the Partner's state parameters. The Actor sets this variable either
+ * to the value received from the Partner in an LACPDU, or to the value
+ * of Partner_Admin_Port_State. Bitmask of port states.
+ */
+ uint8_t partner_state;
+
+ /** The operational Partner's port parameters */
+ struct port_params partner;
+
+ /* Additional port parameters not listed in documentation */
+ /** State machine flags */
+ uint16_t sm_flags;
+ enum rte_bond_8023ad_selection selected;
+
+ uint64_t current_while_timer;
+ uint64_t periodic_timer;
+ uint64_t wait_while_timer;
+ uint64_t tx_machine_timer;
+ uint64_t tx_marker_timer;
+ /* Agregator parameters */
+ /** Used aggregator port ID */
+ uint16_t aggregator_port_id;
+
+ /** Memory pool used to allocate rings */
+ struct rte_mempool *mbuf_pool;
+
+ /** Ring of LACP packets from RX burst function */
+ struct rte_ring *rx_ring;
+
+ /** Ring of slow protocol packets (LACP and MARKERS) to TX burst function */
+ struct rte_ring *tx_ring;
+
+ /** Timer which is also used as mutex. If is 0 (not running) RX marker
+ * packet might be responded. Otherwise shall be dropped. It is zeroed in
+ * mode 4 callback function after expire. */
+ volatile uint64_t rx_marker_timer;
+
+ uint64_t warning_timer;
+ volatile uint16_t warnings_to_show;
+};
+
+struct mode8023ad_private {
+ uint64_t fast_periodic_timeout;
+ uint64_t slow_periodic_timeout;
+ uint64_t short_timeout;
+ uint64_t long_timeout;
+ uint64_t aggregate_wait_timeout;
+ uint64_t tx_period_timeout;
+ uint64_t rx_marker_timeout;
+ uint64_t update_timeout_us;
+};
+
+/**
+ * @internal
+ * The pool of *port* structures. The size of the pool
+ * is configured at compile-time in the <rte_eth_bond_8023ad.c> file.
+ */
+extern struct port mode_8023ad_ports[];
+
+/* Forward declaration */
+struct bond_dev_private;
+
+/**
+ * @internal
+ *
+ * Get configuration of bonded interface.
+ *
+ *
+ * @param dev Bonded interface
+ * @param conf returned configuration
+ */
+void
+bond_mode_8023ad_conf_get(struct rte_eth_dev *dev,
+ struct rte_eth_bond_8023ad_conf *conf);
+
+/**
+ * @internal
+ *
+ * Set mode 4 configuration of bonded interface.
+ *
+ * @pre Bonded interface must be stopped.
+ *
+ * @param dev Bonded interface
+ * @param conf new configuration. If NULL set default configuration.
+ */
+void
+bond_mode_8023ad_setup(struct rte_eth_dev *dev,
+ struct rte_eth_bond_8023ad_conf *conf);
+
+/**
+ * @internal
+ *
+ * Enables 802.1AX mode and all active slaves on bonded interface.
+ *
+ * @param dev Bonded interface
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+int
+bond_mode_8023ad_enable(struct rte_eth_dev *dev);
+
+/**
+ * @internal
+ *
+ * Disables 802.1AX mode of the bonded interface and slaves.
+ *
+ * @param dev Bonded interface
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+int bond_mode_8023ad_disable(struct rte_eth_dev *dev);
+
+/**
+ * @internal
+ *
+ * Starts 802.3AX state machines management logic.
+ * @param dev Bonded interface
+ * @return
+ * 0 if machines was started, 1 if machines was already running,
+ * negative value otherwise.
+ */
+int
+bond_mode_8023ad_start(struct rte_eth_dev *dev);
+
+/**
+ * @internal
+ *
+ * Stops 802.3AX state machines management logic.
+ * @param dev Bonded interface
+ * @return
+ * 0 if this call stopped state machines, -ENOENT if alarm was not set.
+ */
+void
+bond_mode_8023ad_stop(struct rte_eth_dev *dev);
+
+/**
+ * @internal
+ *
+ * Passes given slow packet to state machines management logic.
+ * @param internals Bonded device private data.
+ * @param slave_id Slave port id.
+ * @param slot_pkt Slow packet.
+ */
+void
+bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
+ uint8_t slave_id, struct rte_mbuf *pkt);
+
+/**
+ * @internal
+ *
+ * Appends given slave used slave
+ *
+ * @param dev Bonded interface.
+ * @param port_id Slave port ID to be added
+ *
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+void
+bond_mode_8023ad_activate_slave(struct rte_eth_dev *dev, uint8_t port_id);
+
+/**
+ * @internal
+ *
+ * Denitializes and removes given slave from 802.1AX mode.
+ *
+ * @param dev Bonded interface.
+ * @param slave_num Position of slave in active_slaves array
+ *
+ * @return
+ * 0 on success, negative value otherwise.
+ */
+int
+bond_mode_8023ad_deactivate_slave(struct rte_eth_dev *dev, uint8_t slave_pos);
+
+/**
+ * Updates state when MAC was changed on bonded device or one of its slaves.
+ * @param bond_dev Bonded device
+ */
+void
+bond_mode_8023ad_mac_address_update(struct rte_eth_dev *bond_dev);
+
+#endif /* RTE_ETH_BOND_8023AD_H_ */
diff --git a/lib/librte_pmd_bond/rte_eth_bond_api.c b/lib/librte_pmd_bond/rte_eth_bond_api.c
index f146bda..c8fb42c 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_api.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_api.c
@@ -31,6 +31,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <string.h>
+
#include <rte_mbuf.h>
#include <rte_malloc.h>
#include <rte_ethdev.h>
@@ -38,6 +40,7 @@
#include "rte_eth_bond.h"
#include "rte_eth_bond_private.h"
+#include "rte_eth_bond_8023ad_private.h"
#define DEFAULT_POLLING_INTERVAL_10_MS (10)
@@ -104,6 +107,49 @@ valid_slave_port_id(uint8_t port_id)
return 0;
}
+void
+activate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id)
+{
+ struct bond_dev_private *internals = eth_dev->data->dev_private;
+
+ if (internals->mode == BONDING_MODE_8023AD)
+ bond_mode_8023ad_activate_slave(eth_dev, port_id);
+
+ internals->active_slaves[internals->active_slave_count] = port_id;
+ internals->active_slave_count++;
+}
+
+void
+deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id)
+{
+ uint8_t slave_pos;
+ struct bond_dev_private *internals = eth_dev->data->dev_private;
+ uint8_t active_count = internals->active_slave_count;
+
+ if (internals->mode == BONDING_MODE_8023AD) {
+ bond_mode_8023ad_stop(eth_dev);
+ bond_mode_8023ad_deactivate_slave(eth_dev, port_id);
+ }
+
+ slave_pos = find_slave_by_id(internals->active_slaves, active_count,
+ port_id);
+
+ /* If slave was not at the end of the list
+ * shift active slaves up active array list */
+ if (slave_pos < active_count) {
+ active_count--;
+ memmove(internals->active_slaves + slave_pos,
+ internals->active_slaves + slave_pos + 1,
+ (active_count - slave_pos) *
+ sizeof(internals->active_slaves[0]));
+ }
+
+ internals->active_slave_count = active_count;
+
+ if (eth_dev->data->dev_started && internals->mode == BONDING_MODE_8023AD)
+ bond_mode_8023ad_start(eth_dev);
+}
+
uint8_t
number_of_sockets(void)
{
@@ -216,15 +262,10 @@ rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
eth_dev->dev_ops = &default_dev_ops;
eth_dev->pci_dev = pci_dev;
- if (bond_ethdev_mode_set(eth_dev, mode)) {
- RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
- eth_dev->data->port_id, mode);
- goto err;
- }
-
rte_spinlock_init(&internals->lock);
internals->port_id = eth_dev->data->port_id;
+ internals->mode = BONDING_MODE_INVALID;
internals->current_primary_port = 0;
internals->balance_xmit_policy = BALANCE_XMIT_POLICY_LAYER2;
internals->user_defined_mac = 0;
@@ -242,6 +283,14 @@ rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
memset(internals->active_slaves, 0, sizeof(internals->active_slaves));
memset(internals->slaves, 0, sizeof(internals->slaves));
+ /* Set mode 4 default configuration */
+ bond_mode_8023ad_setup(eth_dev, NULL);
+ if (bond_ethdev_mode_set(eth_dev, mode)) {
+ RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
+ eth_dev->data->port_id, mode);
+ goto err;
+ }
+
return eth_dev->data->port_id;
err:
@@ -349,14 +398,12 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
rte_eth_link_get_nowait(slave_port_id, &link_props);
if (link_props.link_status == 1)
- internals->active_slaves[internals->active_slave_count++] =
- slave_port_id;
+ activate_slave(bonded_eth_dev, slave_port_id);
}
return 0;
}
-
int
rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id)
{
@@ -381,31 +428,26 @@ rte_eth_bond_slave_add(uint8_t bonded_port_id, uint8_t slave_port_id)
return retval;
}
-
static int
__eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
{
+ struct rte_eth_dev *bonded_eth_dev;
struct bond_dev_private *internals;
- int i, slave_idx = -1;
+ int i, slave_idx;
if (valid_slave_port_id(slave_port_id) != 0)
return -1;
- internals = rte_eth_devices[bonded_port_id].data->dev_private;
+ bonded_eth_dev = &rte_eth_devices[bonded_port_id];
+ internals = bonded_eth_dev->data->dev_private;
/* first remove from active slave list */
- for (i = 0; i < internals->active_slave_count; i++) {
- if (internals->active_slaves[i] == slave_port_id)
- slave_idx = i;
-
- /* shift active slaves up active array list */
- if (slave_idx >= 0 && i < (internals->active_slave_count - 1))
- internals->active_slaves[i] = internals->active_slaves[i+1];
- }
+ slave_idx = find_slave_by_id(internals->active_slaves,
+ internals->active_slave_count, slave_port_id);
- if (slave_idx >= 0)
- internals->active_slave_count--;
+ if (slave_idx < internals->active_slave_count)
+ deactivate_slave(bonded_eth_dev, slave_port_id);
slave_idx = -1;
/* now find in slave list */
@@ -539,11 +581,12 @@ rte_eth_bond_primary_get(uint8_t bonded_port_id)
return internals->current_primary_port;
}
+
int
rte_eth_bond_slaves_get(uint8_t bonded_port_id, uint8_t slaves[], uint8_t len)
{
struct bond_dev_private *internals;
- int i;
+ uint8_t i;
if (valid_bonded_port_id(bonded_port_id) != 0)
return -1;
@@ -675,7 +718,6 @@ rte_eth_bond_xmit_policy_get(uint8_t bonded_port_id)
return internals->balance_xmit_policy;
}
-
int
rte_eth_bond_link_monitoring_set(uint8_t bonded_port_id, uint32_t internal_ms)
{
@@ -731,7 +773,6 @@ rte_eth_bond_link_down_prop_delay_get(uint8_t bonded_port_id)
return internals->link_down_delay_ms;
}
-
int
rte_eth_bond_link_up_prop_delay_set(uint8_t bonded_port_id, uint32_t delay_ms)
diff --git a/lib/librte_pmd_bond/rte_eth_bond_args.c b/lib/librte_pmd_bond/rte_eth_bond_args.c
index d8ce681..bf7c1bc 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_args.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_args.c
@@ -173,6 +173,7 @@ bond_ethdev_parse_slave_mode_kvarg(const char *key __rte_unused,
#ifdef RTE_MBUF_REFCNT
case BONDING_MODE_BROADCAST:
#endif
+ case BONDING_MODE_8023AD:
return 0;
default:
RTE_BOND_LOG(ERR, "Invalid slave mode value (%s) specified", value);
diff --git a/lib/librte_pmd_bond/rte_eth_bond_pmd.c b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
index cf2fbab..0c3504a 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_pmd.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
@@ -44,6 +44,7 @@
#include "rte_eth_bond.h"
#include "rte_eth_bond_private.h"
+#include "rte_eth_bond_8023ad_private.h"
static uint16_t
bond_ethdev_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
@@ -91,6 +92,77 @@ bond_ethdev_rx_burst_active_backup(void *queue, struct rte_mbuf **bufs,
}
static uint16_t
+bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
+ uint16_t nb_pkts)
+{
+ /* Cast to structure, containing bonded device's port id and queue id */
+ struct bond_rx_queue *bd_rx_q = (struct bond_rx_queue *)queue;
+ struct bond_dev_private *internals = bd_rx_q->dev_private;
+ struct ether_addr bond_mac;
+
+ struct ether_hdr *hdr;
+
+ const uint16_t ether_type_slow_be = rte_be_to_cpu_16(ETHER_TYPE_SLOW);
+ uint16_t num_rx_total = 0; /* Total number of received packets */
+ uint8_t slaves[RTE_MAX_ETHPORTS];
+ uint8_t slave_count;
+
+ uint8_t collecting; /* current slave collecting status */
+ const uint8_t promisc = internals->promiscuous_en;
+ uint8_t i, j, k;
+
+ rte_eth_macaddr_get(internals->port_id, &bond_mac);
+ /* Copy slave list to protect against slave up/down changes during tx
+ * bursting */
+ slave_count = internals->active_slave_count;
+ memcpy(slaves, internals->active_slaves,
+ sizeof(internals->active_slaves[0]) * slave_count);
+
+ for (i = 0; i < slave_count && num_rx_total < nb_pkts; i++) {
+ j = num_rx_total;
+ collecting = ACTOR_STATE(&mode_8023ad_ports[slaves[i]], COLLECTING);
+
+ /* Read packets from this slave */
+ num_rx_total += rte_eth_rx_burst(slaves[i], bd_rx_q->queue_id,
+ &bufs[num_rx_total], nb_pkts - num_rx_total);
+
+ for (k = j; k < 2 && k < num_rx_total; k++)
+ rte_prefetch0(rte_pktmbuf_mtod(bufs[k], void *));
+
+ /* Handle slow protocol packets. */
+ while (j < num_rx_total) {
+ if (j + 3 < num_rx_total)
+ rte_prefetch0(rte_pktmbuf_mtod(bufs[j + 3], void *));
+
+ hdr = rte_pktmbuf_mtod(bufs[j], struct ether_hdr *);
+ /* Remove packet from array if it is slow packet or slave is not
+ * in collecting state or bondign interface is not in promiscus
+ * mode and packet address does not match. */
+ if (unlikely(hdr->ether_type == ether_type_slow_be ||
+ !collecting || (!promisc &&
+ !is_same_ether_addr(&bond_mac, &hdr->d_addr)))) {
+
+ if (hdr->ether_type == ether_type_slow_be) {
+ bond_mode_8023ad_handle_slow_pkt(internals, slaves[i],
+ bufs[j]);
+ } else
+ rte_pktmbuf_free(bufs[j]);
+
+ /* Packet is managed by mode 4 or dropped, shift the array */
+ num_rx_total--;
+ if (j < num_rx_total) {
+ memmove(&bufs[j], &bufs[j + 1], sizeof(bufs[0]) *
+ (num_rx_total - j));
+ }
+ } else
+ j++;
+ }
+ }
+
+ return num_rx_total;
+}
+
+static uint16_t
bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
uint16_t nb_pkts)
{
@@ -143,7 +215,8 @@ bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
tx_fail_total += tx_fail_slave;
memcpy(&bufs[nb_pkts - tx_fail_total],
- &slave_bufs[i][num_tx_slave], tx_fail_slave * sizeof(bufs[0]));
+ &slave_bufs[i][num_tx_slave],
+ tx_fail_slave * sizeof(bufs[0]));
}
num_tx_total += num_tx_slave;
}
@@ -338,14 +411,107 @@ bond_ethdev_tx_burst_balance(void *queue, struct rte_mbuf **bufs,
int slave_tx_fail_count = slave_nb_pkts[i] - num_tx_slave;
tx_fail_total += slave_tx_fail_count;
- memcpy(bufs[nb_pkts - tx_fail_total],
- slave_bufs[i][num_tx_slave], slave_tx_fail_count);
+ memcpy(&bufs[nb_pkts - tx_fail_total],
+ &slave_bufs[i][num_tx_slave],
+ slave_tx_fail_count * sizeof(bufs[0]));
}
num_tx_total += num_tx_slave;
}
}
+ return num_tx_total;
+}
+
+static uint16_t
+bond_ethdev_tx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
+ uint16_t nb_pkts)
+{
+ struct bond_dev_private *internals;
+ struct bond_tx_queue *bd_tx_q;
+
+ uint8_t num_of_slaves;
+ uint8_t slaves[RTE_MAX_ETHPORTS];
+ /* possitions in slaves, not ID */
+ uint8_t distributing_offsets[RTE_MAX_ETHPORTS];
+ uint8_t distributing_count;
+
+ uint16_t num_tx_slave, num_tx_total = 0, num_tx_fail_total = 0;
+ uint16_t i, j, op_slave_idx;
+ const uint16_t buffs_size = nb_pkts + BOND_MODE_8023AX_SLAVE_TX_PKTS + 1;
+
+ /* Allocate additional packets in case 8023AD mode. */
+ struct rte_mbuf *slave_bufs[RTE_MAX_ETHPORTS][buffs_size];
+ void *slow_pkts[BOND_MODE_8023AX_SLAVE_TX_PKTS];
+
+ /* Total amount of packets in slave_bufs */
+ uint16_t slave_nb_pkts[RTE_MAX_ETHPORTS] = { 0 };
+ /* Slow packets placed in each slave */
+ uint8_t slave_slow_nb_pkts[RTE_MAX_ETHPORTS] = { 0 };
+
+ bd_tx_q = (struct bond_tx_queue *)queue;
+ internals = bd_tx_q->dev_private;
+
+ /* Copy slave list to protect against slave up/down changes during tx
+ * bursting */
+ num_of_slaves = internals->active_slave_count;
+ if (num_of_slaves < 1)
+ return num_tx_total;
+
+ memcpy(slaves, internals->active_slaves, sizeof(slaves[0]) * num_of_slaves);
+
+ distributing_count = 0;
+ for (i = 0; i < num_of_slaves; i++) {
+ struct port *port = &mode_8023ad_ports[slaves[i]];
+
+ slave_slow_nb_pkts[i] = rte_ring_dequeue_burst(port->tx_ring,
+ slow_pkts, BOND_MODE_8023AX_SLAVE_TX_PKTS);
+ slave_nb_pkts[i] = slave_slow_nb_pkts[i];
+
+ for (j = 0; j < slave_slow_nb_pkts[i]; j++)
+ slave_bufs[i][j] = slow_pkts[j];
+
+ if (ACTOR_STATE(port, DISTRIBUTING))
+ distributing_offsets[distributing_count++] = i;
+ }
+
+ if (likely(distributing_count > 0)) {
+ /* Populate slaves mbuf with the packets which are to be sent on it */
+ for (i = 0; i < nb_pkts; i++) {
+ /* Select output slave using hash based on xmit policy */
+ op_slave_idx = xmit_slave_hash(bufs[i], distributing_count,
+ internals->balance_xmit_policy);
+
+ /* Populate slave mbuf arrays with mbufs for that slave. Use only
+ * slaves that are currently distributing. */
+ uint8_t slave_offset = distributing_offsets[op_slave_idx];
+ slave_bufs[slave_offset][slave_nb_pkts[slave_offset]] = bufs[i];
+ slave_nb_pkts[slave_offset]++;
+ }
+ }
+
+ /* Send packet burst on each slave device */
+ for (i = 0; i < num_of_slaves; i++) {
+ if (slave_nb_pkts[i] == 0)
+ continue;
+
+ num_tx_slave = rte_eth_tx_burst(slaves[i], bd_tx_q->queue_id,
+ slave_bufs[i], slave_nb_pkts[i]);
+
+ /* If tx burst fails drop slow packets */
+ for ( ; num_tx_slave < slave_slow_nb_pkts[i]; num_tx_slave++)
+ rte_pktmbuf_free(slave_bufs[i][num_tx_slave]);
+
+ num_tx_total += num_tx_slave - slave_slow_nb_pkts[i];
+ num_tx_fail_total += slave_nb_pkts[i] - num_tx_slave;
+
+ /* If tx burst fails move packets to end of bufs */
+ if (unlikely(num_tx_slave < slave_nb_pkts[i])) {
+ uint16_t j = nb_pkts - num_tx_fail_total;
+ for ( ; num_tx_slave < slave_nb_pkts[i]; j++, num_tx_slave++)
+ bufs[j] = slave_bufs[i][num_tx_slave];
+ }
+ }
return num_tx_total;
}
@@ -451,6 +617,27 @@ link_properties_valid(struct rte_eth_link *bonded_dev_link,
}
int
+mac_address_get(struct rte_eth_dev *eth_dev, struct ether_addr *dst_mac_addr)
+{
+ struct ether_addr *mac_addr;
+
+ mac_addr = eth_dev->data->mac_addrs;
+
+ if (eth_dev == NULL) {
+ RTE_LOG(ERR, PMD, "%s: NULL pointer eth_dev specified\n", __func__);
+ return -1;
+ }
+
+ if (dst_mac_addr == NULL) {
+ RTE_LOG(ERR, PMD, "%s: NULL pointer MAC specified\n", __func__);
+ return -1;
+ }
+
+ ether_addr_copy(mac_addr, dst_mac_addr);
+ return 0;
+}
+
+int
mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr)
{
struct ether_addr *mac_addr;
@@ -458,7 +645,7 @@ mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr)
mac_addr = eth_dev->data->mac_addrs;
if (eth_dev == NULL) {
- RTE_BOND_LOG(ERR, "NULL pointer eth_dev specified");
+ RTE_BOND_LOG(ERR, "NULL pointer eth_dev specified");
return -1;
}
@@ -499,6 +686,9 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
}
}
break;
+ case BONDING_MODE_8023AD:
+ bond_mode_8023ad_mac_address_update(bonded_eth_dev);
+ break;
case BONDING_MODE_ACTIVE_BACKUP:
default:
for (i = 0; i < internals->slave_count; i++) {
@@ -551,6 +741,13 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, int mode)
eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
break;
#endif
+ case BONDING_MODE_8023AD:
+ if (bond_mode_8023ad_enable(eth_dev) != 0)
+ return -1;
+
+ eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_8023ad;
+ eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_8023ad;
+ break;
default:
return -1;
}
@@ -762,6 +959,9 @@ bond_ethdev_start(struct rte_eth_dev *eth_dev)
if (internals->user_defined_primary_port)
bond_ethdev_primary_set(internals, internals->primary_port);
+ if (internals->mode == BONDING_MODE_8023AD)
+ bond_mode_8023ad_start(eth_dev);
+
return 0;
}
@@ -769,6 +969,27 @@ static void
bond_ethdev_stop(struct rte_eth_dev *eth_dev)
{
struct bond_dev_private *internals = eth_dev->data->dev_private;
+ uint8_t i;
+
+ if (internals->mode == BONDING_MODE_8023AD) {
+ struct port *port;
+ void *pkt = NULL;
+
+ bond_mode_8023ad_stop(eth_dev);
+
+ /* Discard all messages to/from mode 4 state machines */
+ for (i = 0; i < internals->slave_count; i++) {
+ port = &mode_8023ad_ports[internals->slaves[i].port_id];
+
+ RTE_VERIFY(port->rx_ring != NULL);
+ while (rte_ring_dequeue(port->rx_ring, &pkt) != -ENOENT)
+ rte_pktmbuf_free(pkt);
+
+ RTE_VERIFY(port->tx_ring != NULL);
+ while (rte_ring_dequeue(port->tx_ring, &pkt) != -ENOENT)
+ rte_pktmbuf_free(pkt);
+ }
+ }
internals->active_slave_count = 0;
internals->link_status_polling_enabled = 0;
@@ -834,7 +1055,7 @@ bond_ethdev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
0, dev->pci_dev->numa_node);
if (bd_tx_q == NULL)
- return -1;
+ return -1;
bd_tx_q->queue_id = tx_queue_id;
bd_tx_q->dev_private = dev->data->dev_private;
@@ -865,7 +1086,6 @@ bond_ethdev_tx_queue_release(void *queue)
rte_free(queue);
}
-
static void
bond_ethdev_slave_link_status_change_monitor(void *cb_arg)
{
@@ -1014,11 +1234,13 @@ bond_ethdev_promiscuous_enable(struct rte_eth_dev *eth_dev)
for (i = 0; i < internals->slave_count; i++)
rte_eth_promiscuous_enable(internals->slaves[i].port_id);
break;
+ /* In mode4 promiscus mode is managed when slave is added/removed */
+ case BONDING_MODE_8023AD:
+ break;
/* Promiscuous mode is propagated only to primary slave */
case BONDING_MODE_ACTIVE_BACKUP:
default:
rte_eth_promiscuous_enable(internals->current_primary_port);
-
}
}
@@ -1040,6 +1262,9 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
for (i = 0; i < internals->slave_count; i++)
rte_eth_promiscuous_disable(internals->slaves[i].port_id);
break;
+ /* In mode4 promiscus mode is set managed when slave is added/removed */
+ case BONDING_MODE_8023AD:
+ break;
/* Promiscuous mode is propagated only to primary slave */
case BONDING_MODE_ACTIVE_BACKUP:
default:
@@ -1065,7 +1290,8 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
struct bond_dev_private *internals;
struct rte_eth_link link;
- int i, valid_slave = 0, active_pos = -1;
+ int i, valid_slave = 0;
+ uint8_t active_pos;
uint8_t lsc_flag = 0;
if (type != RTE_ETH_EVENT_INTR_LSC || param == NULL)
@@ -1095,16 +1321,12 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
return;
/* Search for port in active port list */
- for (i = 0; i < internals->active_slave_count; i++) {
- if (port_id == internals->active_slaves[i]) {
- active_pos = i;
- break;
- }
- }
+ active_pos = find_slave_by_id(internals->active_slaves,
+ internals->active_slave_count, port_id);
rte_eth_link_get_nowait(port_id, &link);
if (link.link_status) {
- if (active_pos >= 0)
+ if (active_pos < internals->active_slave_count)
return;
/* if no active slave ports then set this port to be primary port */
@@ -1118,21 +1340,19 @@ bond_ethdev_lsc_event_callback(uint8_t port_id, enum rte_eth_event_type type,
link_properties_set(bonded_eth_dev,
&(slave_eth_dev->data->dev_link));
}
- internals->active_slaves[internals->active_slave_count++] = port_id;
+
+ activate_slave(bonded_eth_dev, port_id);
/* If user has defined the primary port then default to using it */
if (internals->user_defined_primary_port &&
internals->primary_port == port_id)
bond_ethdev_primary_set(internals, port_id);
} else {
- if (active_pos < 0)
+ if (active_pos == internals->active_slave_count)
return;
/* Remove from active slave list */
- for (i = active_pos; i < (internals->active_slave_count - 1); i++)
- internals->active_slaves[i] = internals->active_slaves[i+1];
-
- internals->active_slave_count--;
+ deactivate_slave(bonded_eth_dev, port_id);
/* No active slaves, change link status to down and reset other
* link properties */
diff --git a/lib/librte_pmd_bond/rte_eth_bond_private.h b/lib/librte_pmd_bond/rte_eth_bond_private.h
index 6254c84..600fc08 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_private.h
+++ b/lib/librte_pmd_bond/rte_eth_bond_private.h
@@ -42,6 +42,7 @@ extern "C" {
#include <rte_spinlock.h>
#include "rte_eth_bond.h"
+#include "rte_eth_bond_8023ad_private.h"
#define PMD_BOND_SLAVE_PORT_KVARG ("slave")
#define PMD_BOND_PRIMARY_SLAVE_KVARG ("primary")
@@ -60,6 +61,8 @@ extern "C" {
#define RTE_BOND_LOG(lvl, msg, ...) \
RTE_LOG(lvl, PMD, "%s(%d) - " msg "\n", __func__, __LINE__, ##__VA_ARGS__)
+#define BONDING_MODE_INVALID 0xFF
+
extern const char *pmd_bond_init_valid_arguments[];
extern const char *driver_name;
@@ -89,7 +92,6 @@ struct bond_tx_queue {
/**< Copy of TX configuration structure for queue */
};
-
/** Bonded slave devices structure */
struct bond_ethdev_slave_ports {
uint8_t slaves[RTE_MAX_ETHPORTS]; /**< Slave port id array */
@@ -124,7 +126,7 @@ struct bond_dev_private {
uint8_t user_defined_mac;
/**< Flag for whether MAC address is user defined or not */
uint8_t promiscuous_en;
- /**< Enabled/disable promiscuous mode on slave devices */
+ /**< Enabled/disable promiscuous mode on bonding device */
uint8_t link_props_set;
/**< flag to denote if the link properties are set */
@@ -144,6 +146,8 @@ struct bond_dev_private {
struct bond_slave_details slaves[RTE_MAX_ETHPORTS];
/**< Arary of bonded slaves details */
+ struct mode8023ad_private mode4;
+
struct rte_kvargs *kvlist;
};
@@ -152,6 +156,20 @@ extern struct eth_dev_ops default_dev_ops;
int
valid_bonded_ethdev(struct rte_eth_dev *eth_dev);
+/* Search given slave array to find possition of given id.
+ * Return slave pos or slaves_count if not found. */
+static inline uint8_t
+find_slave_by_id(uint8_t *slaves, uint8_t slaves_count, uint8_t slave_id) {
+
+ uint8_t pos;
+ for (pos = 0; pos < slaves_count; pos++) {
+ if (slave_id == slaves[pos])
+ break;
+ }
+
+ return pos;
+}
+
int
valid_port_id(uint8_t port_id);
@@ -162,6 +180,12 @@ int
valid_slave_port_id(uint8_t port_id);
void
+deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id);
+
+void
+activate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id);
+
+void
link_properties_set(struct rte_eth_dev *bonded_eth_dev,
struct rte_eth_link *slave_dev_link);
void
@@ -175,6 +199,9 @@ int
mac_address_set(struct rte_eth_dev *eth_dev, struct ether_addr *new_mac_addr);
int
+mac_address_get(struct rte_eth_dev *eth_dev, struct ether_addr *dst_mac_addr);
+
+int
mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev);
uint8_t
--
1.7.9.5
next prev parent reply other threads:[~2014-11-26 11:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-26 11:17 [dpdk-dev] [PATCH v6 0/2] bond: mode 4 support Michal Jastrzebski
2014-11-26 11:17 ` Michal Jastrzebski [this message]
2014-11-26 11:17 ` [dpdk-dev] [PATCH v6 2/2] testpmd: add mode 4 support v6 Michal Jastrzebski
2014-11-26 12:31 ` Thomas Monjalon
2014-11-26 13:00 ` Wodkowski, PawelX
2014-11-26 13:30 ` Thomas Monjalon
2014-11-26 14:05 ` Jastrzebski, MichalX K
2014-11-26 12:16 ` [dpdk-dev] [PATCH v6 0/2] bond: mode 4 support Thomas Monjalon
2014-11-26 12:24 ` Jastrzebski, MichalX K
2014-11-26 12:27 ` Thomas Monjalon
2014-11-26 13:29 ` Jastrzebski, MichalX K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417000643-26885-2-git-send-email-michalx.k.jastrzebski@intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).