From: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 2/2] Unit tests for Mode 5 of Bonding Transmit Load balancig.
Date: Thu, 27 Nov 2014 16:49:26 +0000 [thread overview]
Message-ID: <1417106966-25813-2-git-send-email-danielx.t.mrzyglod@intel.com> (raw)
In-Reply-To: <1417106966-25813-1-git-send-email-danielx.t.mrzyglod@intel.com>
This Patch add unit tests for mode 5 - tlb - to the oders
link bonding unit tests.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
---
app/test/test_link_bonding.c | 499 ++++++++++++++++++++++++++++++++++++++++++-
app/test/virtual_pmd.c | 6 +-
2 files changed, 502 insertions(+), 3 deletions(-)
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 93449af..f62c490 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -41,7 +41,7 @@
#include <errno.h>
#include <sys/queue.h>
#include <sys/time.h>
-
+#include <rte_cycles.h>
#include <rte_byteorder.h>
#include <rte_common.h>
#include <rte_debug.h>
@@ -3856,6 +3856,498 @@ testsuite_teardown(void)
return remove_slaves_and_stop_bonded_device();
}
+static int
+test_tlb_tx_burst(void)
+{
+ int i, burst_size, nb_tx;
+ uint64_t nb_tx2 = 0;
+ struct rte_mbuf *pkt_burst[MAX_PKT_BURST];
+ struct rte_eth_stats port_stats[32];
+ uint64_t sum_ports_opackets = 0, all_bond_opackets = 0, all_bond_obytes = 0;
+ uint16_t pktlen;
+ uint64_t floor_obytes = 0, ceiling_obytes = 0;
+
+ TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves
+ (BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 1, 3, 1),
+ "Failed to initialise bonded device");
+
+ burst_size = 20 * test_params->bonded_slave_count;
+
+ TEST_ASSERT(burst_size < MAX_PKT_BURST,
+ "Burst size specified is greater than supported.\n");
+
+
+ /* Generate 400000 test bursts in 2s of packets to transmit */
+ for (i = 0; i < 400000; i++) {
+ /*test two types of mac src own(bonding) and others */
+ if (i % 2 == 0) {
+ initialize_eth_header(test_params->pkt_eth_hdr,
+ (struct ether_addr *)src_mac,
+ (struct ether_addr *)dst_mac_0, 0, 0);
+ } else {
+ initialize_eth_header(test_params->pkt_eth_hdr,
+ (struct ether_addr *)test_params->default_slave_mac,
+ (struct ether_addr *)dst_mac_0, 0, 0);
+ }
+ pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
+ dst_port_0, 16);
+ pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
+ dst_addr_0, pktlen);
+ generate_packet_burst(test_params->mbuf_pool, pkt_burst,
+ test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr,
+ 1, test_params->pkt_udp_hdr, burst_size, 60, 1);
+ /* Send burst on bonded port */
+ nb_tx = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkt_burst,
+ burst_size);
+ nb_tx2 += nb_tx;
+
+ TEST_ASSERT_EQUAL(nb_tx, burst_size,
+ "number of packet not equal burst size");
+
+ rte_delay_us(5);
+ }
+
+
+ /* Verify bonded port tx stats */
+ rte_eth_stats_get(test_params->bonded_port_id, &port_stats[0]);
+
+ all_bond_opackets = port_stats[0].opackets;
+ all_bond_obytes = port_stats[0].obytes;
+
+ TEST_ASSERT_EQUAL(port_stats[0].opackets, (uint64_t)nb_tx2,
+ "Bonded Port (%d) opackets value (%u) not as expected (%d)\n",
+ test_params->bonded_port_id, (unsigned int)port_stats[0].opackets,
+ burst_size);
+
+
+ /* Verify slave ports tx stats */
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+ rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats[i]);
+ sum_ports_opackets += port_stats[i].opackets;
+ }
+
+ TEST_ASSERT_EQUAL(sum_ports_opackets, (uint64_t)all_bond_opackets,
+ "Total packets sent by slaves is not equal to packets sent by bond interface");
+ /* distribution of packets on each slave within +/- 10% of the expected value. */
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+
+ floor_obytes = (all_bond_obytes*90)/(test_params->bonded_slave_count*100);
+ ceiling_obytes = (all_bond_obytes*110)/(test_params->bonded_slave_count*100);
+ TEST_ASSERT(port_stats[i].obytes >= floor_obytes &&
+ port_stats[i].obytes <= ceiling_obytes,
+ "Distribution is not even");
+ }
+ /* Put all slaves down and try and transmit */
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[i], 0);
+ }
+
+ /* Send burst on bonded port */
+ nb_tx = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkt_burst,
+ burst_size);
+ TEST_ASSERT_EQUAL(nb_tx, 0, " bad number of packet in burst");
+
+ /* Clean ugit checkout masterp and remove slaves from bonded device */
+ return remove_slaves_and_stop_bonded_device();
+}
+
+#define TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT (4)
+
+static int
+test_tlb_rx_burst(void)
+{
+ struct rte_mbuf *gen_pkt_burst[MAX_PKT_BURST] = { NULL };
+ struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
+
+ struct rte_eth_stats port_stats;
+
+ int primary_port;
+
+ uint16_t i, j, nb_rx, burst_size = 17;
+
+ /* Initialize bonded device with 4 slaves in transmit load balancing mode */
+ TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
+ BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING,
+ TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT, 1, 1),
+ "Failed to initialize bonded device");
+
+
+ primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
+ TEST_ASSERT(primary_port >= 0,
+ "failed to get primary slave for bonded port (%d)",
+ test_params->bonded_port_id);
+
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+ /* Generate test bursts of packets to transmit */
+ TEST_ASSERT_EQUAL(generate_test_burst(
+ &gen_pkt_burst[0], burst_size, 0, 1, 0, 0, 0), burst_size,
+ "burst generation failed");
+
+ /* Add rx data to slave */
+ virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
+ &gen_pkt_burst[0], burst_size);
+
+ /* Call rx burst on bonded device */
+ nb_rx = rte_eth_rx_burst(test_params->bonded_port_id, 0,
+ &rx_pkt_burst[0], MAX_PKT_BURST);
+
+ TEST_ASSERT_EQUAL(nb_rx, burst_size, "rte_eth_rx_burst failed\n");
+
+ if (test_params->slave_port_ids[i] == primary_port) {
+ /* Verify bonded device rx count */
+ rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
+ TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
+ "Bonded Port (%d) ipackets value (%u) not as expected (%d)\n",
+ test_params->bonded_port_id,
+ (unsigned int)port_stats.ipackets, burst_size);
+
+ /* Verify bonded slave devices rx count */
+ for (j = 0; j < test_params->bonded_slave_count; j++) {
+ rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
+ if (i == j) {
+ TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
+ "Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
+ test_params->slave_port_ids[i],
+ (unsigned int)port_stats.ipackets, burst_size);
+ } else {
+ TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)0,
+ "Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
+ test_params->slave_port_ids[i],
+ (unsigned int)port_stats.ipackets, 0);
+ }
+ }
+ } else {
+ for (j = 0; j < test_params->bonded_slave_count; j++) {
+ rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
+ TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)0,
+ "Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
+ test_params->slave_port_ids[i],
+ (unsigned int)port_stats.ipackets, 0);
+ }
+ }
+
+ /* free mbufs */
+ for (i = 0; i < burst_size; i++)
+ rte_pktmbuf_free(rx_pkt_burst[i]);
+
+ /* reset bonded device stats */
+ rte_eth_stats_reset(test_params->bonded_port_id);
+ }
+
+ /* Clean up and remove slaves from bonded device */
+ return remove_slaves_and_stop_bonded_device();
+}
+
+static int
+test_tlb_verify_promiscuous_enable_disable(void)
+{
+ int i, primary_port, promiscuous_en;
+
+ /* Initialize bonded device with 4 slaves in transmit load balancing mode */
+ TEST_ASSERT_SUCCESS( initialize_bonded_device_with_slaves(
+ BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0, 4, 1),
+ "Failed to initialize bonded device");
+
+ primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
+ TEST_ASSERT(primary_port >= 0,
+ "failed to get primary slave for bonded port (%d)",
+ test_params->bonded_port_id);
+
+ rte_eth_promiscuous_enable(test_params->bonded_port_id);
+
+ promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
+ TEST_ASSERT_EQUAL(promiscuous_en, (int)1,
+ "Port (%d) promiscuous mode not enabled\n",
+ test_params->bonded_port_id);
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+ promiscuous_en = rte_eth_promiscuous_get(
+ test_params->slave_port_ids[i]);
+ if (primary_port == test_params->slave_port_ids[i]) {
+ TEST_ASSERT_EQUAL(promiscuous_en, (int)1,
+ "Port (%d) promiscuous mode not enabled\n",
+ test_params->bonded_port_id);
+ } else {
+ TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
+ "Port (%d) promiscuous mode enabled\n",
+ test_params->bonded_port_id);
+ }
+
+ }
+
+ rte_eth_promiscuous_disable(test_params->bonded_port_id);
+
+ promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
+ TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
+ "Port (%d) promiscuous mode not disabled\n",
+ test_params->bonded_port_id);
+
+ for (i = 0; i < test_params->bonded_slave_count; i++) {
+ promiscuous_en = rte_eth_promiscuous_get(
+ test_params->slave_port_ids[i]);
+ TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
+ "slave port (%d) promiscuous mode not disabled\n",
+ test_params->slave_port_ids[i]);
+ }
+
+ /* Clean up and remove slaves from bonded device */
+ return remove_slaves_and_stop_bonded_device();
+}
+
+static int
+test_tlb_verify_mac_assignment(void)
+{
+ struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_1;
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
+ rte_eth_macaddr_get(test_params->slave_port_ids[1], &expected_mac_addr_1);
+
+ /* Initialize bonded device with 2 slaves in active backup mode */
+ TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
+ BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0, 2, 1),
+ "Failed to initialize bonded device");
+
+ /* Verify that bonded MACs is that of first slave and that the other slave
+ * MAC hasn't been changed */
+ rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "bonded port (%d) mac address not set to that of primary port",
+ test_params->bonded_port_id);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not set to that of primary port",
+ test_params->slave_port_ids[0]);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not as expected",
+ test_params->slave_port_ids[1]);
+
+ /* change primary and verify that MAC addresses haven't changed */
+ TEST_ASSERT_EQUAL(rte_eth_bond_primary_set(test_params->bonded_port_id,
+ test_params->slave_port_ids[1]), 0,
+ "Failed to set bonded port (%d) primary port to (%d)",
+ test_params->bonded_port_id, test_params->slave_port_ids[1]);
+
+ rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "bonded port (%d) mac address not set to that of primary port",
+ test_params->bonded_port_id);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not set to that of primary port",
+ test_params->slave_port_ids[0]);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not as expected",
+ test_params->slave_port_ids[1]);
+
+ /* stop / start bonded device and verify that primary MAC address is
+ * propagated to bonded device and slaves */
+
+ rte_eth_dev_stop(test_params->bonded_port_id);
+
+ TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
+ "Failed to start device");
+
+ rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "bonded port (%d) mac address not set to that of primary port",
+ test_params->bonded_port_id);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not as expected",
+ test_params->slave_port_ids[0]);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not set to that of primary port",
+ test_params->slave_port_ids[1]);
+
+
+ /* Set explicit MAC address */
+ TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
+ test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
+ "failed to set MAC addres");
+
+ rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "bonded port (%d) mac address not set to that of bonded port",
+ test_params->bonded_port_id);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not as expected",
+ test_params->slave_port_ids[0]);
+
+ rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
+ TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
+ sizeof(read_mac_addr)),
+ "slave port (%d) mac address not set to that of bonded port",
+ test_params->slave_port_ids[1]);
+
+ /* Clean up and remove slaves from bonded device */
+ return remove_slaves_and_stop_bonded_device();
+}
+
+static int
+test_tlb_verify_slave_link_status_change_failover(void)
+{
+ struct rte_mbuf *pkt_burst[TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
+ struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
+ struct rte_eth_stats port_stats;
+
+ uint8_t slaves[RTE_MAX_ETHPORTS];
+
+ int i, j, burst_size, slave_count, primary_port;
+
+ burst_size = 21;
+
+ memset(pkt_burst, 0, sizeof(pkt_burst));
+
+
+
+ /* Initialize bonded device with 4 slaves in round robin mode */
+ TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
+ BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0,
+ TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT, 1),
+ "Failed to initialize bonded device with slaves");
+
+ /* Verify Current Slaves Count /Active Slave Count is */
+ slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
+ RTE_MAX_ETHPORTS);
+ TEST_ASSERT_EQUAL(slave_count, 4,
+ "Number of slaves (%d) is not as expected (%d).\n",
+ slave_count, 4);
+
+ slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
+ slaves, RTE_MAX_ETHPORTS);
+ TEST_ASSERT_EQUAL(slave_count, (int)4,
+ "Number of slaves (%d) is not as expected (%d).\n",
+ slave_count, 4);
+
+ primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
+ TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[0],
+ "Primary port not as expected");
+
+ /* Bring 2 slaves down and verify active slave count */
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[1], 0);
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[3], 0);
+
+ TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
+ test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 2,
+ "Number of active slaves (%d) is not as expected (%d).",
+ slave_count, 2);
+
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[1], 1);
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[3], 1);
+
+
+ /* Bring primary port down, verify that active slave count is 3 and primary
+ * has changed */
+ virtual_ethdev_simulate_link_status_interrupt(
+ test_params->slave_port_ids[0], 0);
+
+ TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
+ test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 3,
+ "Number of active slaves (%d) is not as expected (%d).",
+ slave_count, 3);
+
+ primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
+ TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[2],
+ "Primary port not as expected");
+ rte_delay_us(500000);
+ /* Verify that pkts are sent on new primary slave */
+ for (i = 0; i < 4; i++) {
+ TEST_ASSERT_EQUAL(generate_test_burst(
+ &pkt_burst[0][0], burst_size, 0, 1, 0, 0, 0), burst_size,
+ "generate_test_burst failed\n");
+ TEST_ASSERT_EQUAL(rte_eth_tx_burst(
+ test_params->bonded_port_id, 0, &pkt_burst[0][0], burst_size), burst_size,
+ "rte_eth_tx_burst failed\n");
+ rte_delay_us(11000);
+ }
+
+ rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
+ TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
+ "(%d) port_stats.opackets not as expected\n",
+ test_params->slave_port_ids[2]);
+
+ rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
+ TEST_ASSERT_EQUAL(port_stats.opackets, (int8_t)0,
+ "(%d) port_stats.opackets not as expected\n",
+ test_params->slave_port_ids[0]);
+
+ rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
+ TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
+ "(%d) port_stats.opackets not as expected\n",
+ test_params->slave_port_ids[1]);
+
+ rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
+ TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
+ "(%d) port_stats.opackets not as expected\n",
+ test_params->slave_port_ids[3]);
+
+
+ /* Generate packet burst for testing */
+
+ for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
+ if (generate_test_burst(&pkt_burst[i][0], burst_size, 0, 1, 0, 0, 0) !=
+ burst_size)
+ return -1;
+
+ virtual_ethdev_add_mbufs_to_rx_queue(
+ test_params->slave_port_ids[i], &pkt_burst[i][0], burst_size);
+ }
+
+ if (rte_eth_rx_burst(test_params->bonded_port_id, 0, rx_pkt_burst,
+ MAX_PKT_BURST) != burst_size) {
+ printf("rte_eth_rx_burst\n");
+ return -1;
+
+ }
+
+ /* Verify bonded device rx count */
+ rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
+ TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
+ "(%d) port_stats.ipackets not as expected\n",
+ test_params->bonded_port_id);
+
+ /* free mbufs */
+
+ for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
+ for (j = 0; j < MAX_PKT_BURST; j++) {
+ if (pkt_burst[i][j] != NULL) {
+ rte_pktmbuf_free(pkt_burst[i][j]);
+ pkt_burst[i][j] = NULL;
+ }
+ }
+ }
+
+
+ /* Clean up and remove slaves from bonded device */
+ return remove_slaves_and_stop_bonded_device();
+}
+
static struct unit_test_suite link_bonding_test_suite = {
.suite_name = "Link Bonding Unit Test Suite",
@@ -3909,6 +4401,11 @@ static struct unit_test_suite link_bonding_test_suite = {
TEST_CASE(test_balance_verify_promiscuous_enable_disable),
TEST_CASE(test_balance_verify_mac_assignment),
TEST_CASE(test_balance_verify_slave_link_status_change_behaviour),
+ TEST_CASE(test_tlb_tx_burst),
+ TEST_CASE(test_tlb_rx_burst),
+ TEST_CASE(test_tlb_verify_mac_assignment),
+ TEST_CASE(test_tlb_verify_promiscuous_enable_disable),
+ TEST_CASE(test_tlb_verify_slave_link_status_change_failover),
#ifdef RTE_MBUF_REFCNT
TEST_CASE(test_broadcast_tx_burst),
TEST_CASE(test_broadcast_tx_burst_slave_tx_fail),
diff --git a/app/test/virtual_pmd.c b/app/test/virtual_pmd.c
index e7be98b..ade6cb0 100644
--- a/app/test/virtual_pmd.c
+++ b/app/test/virtual_pmd.c
@@ -359,16 +359,18 @@ virtual_ethdev_tx_burst_success(void *queue, struct rte_mbuf **bufs,
struct rte_eth_dev *vrtl_eth_dev;
struct virtual_ethdev_private *dev_private;
-
+ uint64_t obytes = 0;
int i;
+ for (i = 0; i < nb_pkts; i++)
+ obytes += rte_pktmbuf_pkt_len(bufs[i]);
vrtl_eth_dev = &rte_eth_devices[tx_q->port_id];
dev_private = vrtl_eth_dev->data->dev_private;
if (vrtl_eth_dev->data->dev_link.link_status) {
/* increment opacket count */
dev_private->eth_stats.opackets += nb_pkts;
-
+ dev_private->eth_stats.obytes += obytes;
/* free packets in burst */
for (i = 0; i < nb_pkts; i++)
rte_pktmbuf_free(bufs[i]);
--
2.1.0
next prev parent reply other threads:[~2014-11-27 17:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 16:49 [dpdk-dev] [PATCH v4 0/2] ADD mode 5(tlb) to link bonding pmd Daniel Mrzyglod
2014-11-27 16:49 ` Daniel Mrzyglod [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-11-27 16:33 Daniel Mrzyglod
2014-11-27 16:33 ` [dpdk-dev] [PATCH v4 2/2] Unit tests for Mode 5 of Bonding Transmit Load balancig Daniel Mrzyglod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417106966-25813-2-git-send-email-danielx.t.mrzyglod@intel.com \
--to=danielx.t.mrzyglod@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).