From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 3/3] mbuf:replace the inner_l2_len and the inner_l3_len fields
Date: Tue, 2 Dec 2014 14:52:52 +0800 [thread overview]
Message-ID: <1417503172-18642-4-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1417503172-18642-1-git-send-email-jijiang.liu@intel.com>
Replace the inner_l2_len and the inner_l3_len field with the outer_l2_len and outer_l3_len field, and rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
app/test-pmd/csumonly.c | 60 +++++++++++++++++++++-----------------
lib/librte_mbuf/rte_mbuf.h | 4 +-
lib/librte_pmd_i40e/i40e_rxtx.c | 38 +++++++++++++-----------
3 files changed, 55 insertions(+), 47 deletions(-)
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 9094967..e874ac5 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -189,11 +189,12 @@ process_inner_cksums(void *l3_hdr, uint16_t ethertype, uint16_t l3_len,
} else {
if (testpmd_ol_flags & TESTPMD_TX_OFFLOAD_IP_CKSUM)
ol_flags |= PKT_TX_IP_CKSUM;
- else
+ else {
ipv4_hdr->hdr_checksum =
rte_ipv4_cksum(ipv4_hdr);
+ ol_flags |= PKT_TX_IPV4;
+ }
}
- ol_flags |= PKT_TX_IPV4;
} else if (ethertype == _htons(ETHER_TYPE_IPv6))
ol_flags |= PKT_TX_IPV6;
else
@@ -262,22 +263,25 @@ process_outer_cksums(void *outer_l3_hdr, uint16_t outer_ethertype,
if (outer_ethertype == _htons(ETHER_TYPE_IPv4)) {
ipv4_hdr->hdr_checksum = 0;
- if ((testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM) == 0)
+ if (testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM)
+ ol_flags |= PKT_TX_OUTER_IP_CKSUM;
+ else {
+ ol_flags |= PKT_TX_OUTER_IPV4;
ipv4_hdr->hdr_checksum = rte_ipv4_cksum(ipv4_hdr);
- }
+ }
+ } else
+ ol_flags |= PKT_TX_OUTER_IPV6;
udp_hdr = (struct udp_hdr *)((char *)outer_l3_hdr + outer_l3_len);
/* do not recalculate udp cksum if it was 0 */
if (udp_hdr->dgram_cksum != 0) {
udp_hdr->dgram_cksum = 0;
- if ((testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM) == 0) {
- if (outer_ethertype == _htons(ETHER_TYPE_IPv4))
- udp_hdr->dgram_cksum =
- rte_ipv4_udptcp_cksum(ipv4_hdr, udp_hdr);
- else
- udp_hdr->dgram_cksum =
- rte_ipv6_udptcp_cksum(ipv6_hdr, udp_hdr);
- }
+ if (outer_ethertype == _htons(ETHER_TYPE_IPv4))
+ udp_hdr->dgram_cksum =
+ rte_ipv4_udptcp_cksum(ipv4_hdr, udp_hdr);
+ else
+ udp_hdr->dgram_cksum =
+ rte_ipv6_udptcp_cksum(ipv6_hdr, udp_hdr);
}
return ol_flags;
@@ -303,8 +307,7 @@ process_outer_cksums(void *outer_l3_hdr, uint16_t outer_ethertype,
* TESTPMD_TX_OFFLOAD_* in ports[tx_port].tx_ol_flags. They control
* wether a checksum must be calculated in software or in hardware. The
* IP, UDP, TCP and SCTP flags always concern the inner layer. The
- * VxLAN flag concerns the outer IP and UDP layer (if packet is
- * recognized as a vxlan packet).
+ * VxLAN flag concerns the outer IP(if packet is recognized as a vxlan packet).
*/
static void
pkt_burst_checksum_forward(struct fwd_stream *fs)
@@ -320,7 +323,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
uint16_t i;
uint64_t ol_flags;
uint16_t testpmd_ol_flags;
- uint8_t l4_proto;
+ uint8_t l4_proto, l4_tun_len = 0;
uint16_t ethertype = 0, outer_ethertype = 0;
uint16_t l2_len = 0, l3_len = 0, l4_len = 0;
uint16_t outer_l2_len = 0, outer_l3_len = 0;
@@ -360,6 +363,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
ol_flags = 0;
tunnel = 0;
+ l4_tun_len = 0;
m = pkts_burst[i];
/* Update the L3/L4 checksum error packet statistics */
@@ -378,14 +382,16 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
if (l4_proto == IPPROTO_UDP) {
udp_hdr = (struct udp_hdr *)((char *)l3_hdr + l3_len);
+ /* check udp destination port, 4789 is the default
+ * vxlan port (rfc7348) */
+ if (udp_hdr->dst_port == _htons(4789)) {
+ l4_tun_len = ETHER_VXLAN_HLEN;
+ tunnel = 1;
+
/* currently, this flag is set by i40e only if the
* packet is vxlan */
- if (((m->ol_flags & PKT_RX_TUNNEL_IPV4_HDR) ||
- (m->ol_flags & PKT_RX_TUNNEL_IPV6_HDR)))
- tunnel = 1;
- /* else check udp destination port, 4789 is the default
- * vxlan port (rfc7348) */
- else if (udp_hdr->dst_port == _htons(4789))
+ } else if (m->ol_flags & (PKT_RX_TUNNEL_IPV4_HDR |
+ PKT_RX_TUNNEL_IPV6_HDR))
tunnel = 1;
if (tunnel == 1) {
@@ -432,10 +438,10 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
if (tunnel == 1) {
if (testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM) {
- m->l2_len = outer_l2_len;
- m->l3_len = outer_l3_len;
- m->inner_l2_len = l2_len;
- m->inner_l3_len = l3_len;
+ m->outer_l2_len = outer_l2_len;
+ m->outer_l3_len = outer_l3_len;
+ m->l2_len = l4_tun_len + l2_len;
+ m->l3_len = l3_len;
}
else {
/* if we don't do vxlan cksum in hw,
@@ -503,8 +509,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
m->l2_len, m->l3_len, m->l4_len);
if ((tunnel == 1) &&
(testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM))
- printf("tx: m->inner_l2_len=%d m->inner_l3_len=%d\n",
- m->inner_l2_len, m->inner_l3_len);
+ printf("tx: m->outer_l2_len=%d m->outer_l3_len=%d\n",
+ m->outer_l2_len, m->outer_l3_len);
if (tso_segsz != 0)
printf("tx: m->tso_segsz=%d\n", m->tso_segsz);
printf("tx: flags=");
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 6eb898f..0404261 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -276,8 +276,8 @@ struct rte_mbuf {
uint64_t tso_segsz:16; /**< TCP TSO segment size */
/* fields for TX offloading of tunnels */
- uint64_t inner_l3_len:9; /**< inner L3 (IP) Hdr Length. */
- uint64_t inner_l2_len:7; /**< inner L2 (MAC) Hdr Length. */
+ uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
+ uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */
/* uint64_t unused:8; */
};
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 078e973..9f0d1eb 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -462,41 +462,43 @@ i40e_txd_enable_checksum(uint64_t ol_flags,
uint32_t *td_offset,
uint8_t l2_len,
uint16_t l3_len,
- uint8_t inner_l2_len,
- uint16_t inner_l3_len,
+ uint8_t outer_l2_len,
+ uint16_t outer_l3_len,
uint32_t *cd_tunneling)
{
if (!l2_len) {
PMD_DRV_LOG(DEBUG, "L2 length set to 0");
return;
}
- *td_offset |= (l2_len >> 1) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
if (!l3_len) {
PMD_DRV_LOG(DEBUG, "L3 length set to 0");
return;
}
- /* VXLAN packet TX checksum offload */
+ /* UDP tunneling packet TX checksum offload */
if (unlikely(ol_flags & PKT_TX_UDP_TUNNEL_PKT)) {
- uint8_t l4tun_len;
- l4tun_len = ETHER_VXLAN_HLEN + inner_l2_len;
+ *td_offset |= (outer_l2_len >> 1)
+ << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
- if (ol_flags & PKT_TX_IPV4_CSUM)
+ if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
*cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV4;
- else if (ol_flags & PKT_TX_IPV6)
+ else if (ol_flags & PKT_TX_OUTER_IPV4)
+ *cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
+ else if (ol_flags & PKT_TX_OUTER_IPV6)
*cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV6;
/* Now set the ctx descriptor fields */
- *cd_tunneling |= (l3_len >> 2) <<
+ *cd_tunneling |= (outer_l3_len >> 2) <<
I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT |
I40E_TXD_CTX_UDP_TUNNELING |
- (l4tun_len >> 1) <<
+ (l2_len >> 1) <<
I40E_TXD_CTX_QW0_NATLEN_SHIFT;
- l3_len = inner_l3_len;
- }
+ } else
+ *td_offset |= (l2_len >> 1)
+ << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
/* Enable L3 checksum offloads */
if (ol_flags & PKT_TX_IPV4_CSUM) {
@@ -1190,8 +1192,8 @@ i40e_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
uint64_t ol_flags;
uint8_t l2_len;
uint16_t l3_len;
- uint8_t inner_l2_len;
- uint16_t inner_l3_len;
+ uint8_t outer_l2_len;
+ uint16_t outer_l3_len;
uint16_t nb_used;
uint16_t nb_ctx;
uint16_t tx_last;
@@ -1219,9 +1221,9 @@ i40e_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
ol_flags = tx_pkt->ol_flags;
l2_len = tx_pkt->l2_len;
- inner_l2_len = tx_pkt->inner_l2_len;
l3_len = tx_pkt->l3_len;
- inner_l3_len = tx_pkt->inner_l3_len;
+ outer_l2_len = tx_pkt->outer_l2_len;
+ outer_l3_len = tx_pkt->outer_l3_len;
/* Calculate the number of context descriptors needed. */
nb_ctx = i40e_calc_context_desc(ol_flags);
@@ -1271,8 +1273,8 @@ i40e_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
/* Enable checksum offloading */
cd_tunneling_params = 0;
i40e_txd_enable_checksum(ol_flags, &td_cmd, &td_offset,
- l2_len, l3_len, inner_l2_len,
- inner_l3_len,
+ l2_len, l3_len, outer_l2_len,
+ outer_l3_len,
&cd_tunneling_params);
if (unlikely(nb_ctx)) {
--
1.7.7.6
next prev parent reply other threads:[~2014-12-02 6:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-02 6:52 [dpdk-dev] [PATCH v4 0/3] i40e VXLAN TX checksum rework Jijiang Liu
2014-12-02 6:52 ` [dpdk-dev] [PATCH v4 1/3] mbuf:redefine three TX ol_flags Jijiang Liu
2014-12-02 6:52 ` [dpdk-dev] [PATCH v4 2/3] mbuf:add three TX ol_flags and repalce PKT_TX_VXLAN_CKSUM Jijiang Liu
2014-12-02 6:52 ` Jijiang Liu [this message]
2014-12-02 14:53 ` [dpdk-dev] [PATCH v4 3/3] mbuf:replace the inner_l2_len and the inner_l3_len fields didier.pallard
2014-12-02 15:36 ` Ananyev, Konstantin
2014-12-03 8:57 ` Olivier MATZ
2014-12-03 11:11 ` Ananyev, Konstantin
2014-12-03 11:27 ` Olivier MATZ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417503172-18642-4-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).