From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 2/3] mbuf:add three TX ol_flags and repalce PKT_TX_VXLAN_CKSUM
Date: Tue, 2 Dec 2014 23:06:06 +0800 [thread overview]
Message-ID: <1417532767-1309-3-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1417532767-1309-1-git-send-email-jijiang.liu@intel.com>
Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT in order to indicate a packet is an UDP tunneling packet, and introduce 3 TX offload flags for outer IP TX checksum, which are PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4 and PKT_TX_OUTER_IPV6 respectively;Rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
app/test-pmd/csumonly.c | 9 +++++++--
lib/librte_mbuf/rte_mbuf.c | 7 ++++++-
lib/librte_mbuf/rte_mbuf.h | 11 ++++++++++-
lib/librte_pmd_i40e/i40e_rxtx.c | 6 +++---
4 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index d8c080a..9094967 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -257,7 +257,7 @@ process_outer_cksums(void *outer_l3_hdr, uint16_t outer_ethertype,
uint64_t ol_flags = 0;
if (testpmd_ol_flags & TESTPMD_TX_OFFLOAD_VXLAN_CKSUM)
- ol_flags |= PKT_TX_VXLAN_CKSUM;
+ ol_flags |= PKT_TX_UDP_TUNNEL_PKT;
if (outer_ethertype == _htons(ETHER_TYPE_IPv4)) {
ipv4_hdr->hdr_checksum = 0;
@@ -470,7 +470,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
{ PKT_TX_UDP_CKSUM, PKT_TX_L4_MASK },
{ PKT_TX_TCP_CKSUM, PKT_TX_L4_MASK },
{ PKT_TX_SCTP_CKSUM, PKT_TX_L4_MASK },
- { PKT_TX_VXLAN_CKSUM, PKT_TX_VXLAN_CKSUM },
+ { PKT_TX_UDP_TUNNEL_PKT, PKT_TX_UDP_TUNNEL_PKT },
+ { PKT_TX_IPV4, PKT_TX_IPV4 },
+ { PKT_TX_IPV6, PKT_TX_IPV6 },
+ { PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IP_CKSUM },
+ { PKT_TX_OUTER_IPV4, PKT_TX_OUTER_IPV4 },
+ { PKT_TX_OUTER_IPV6, PKT_TX_OUTER_IPV6 },
{ PKT_TX_TCP_SEG, PKT_TX_TCP_SEG },
};
unsigned j;
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 87c2963..1b14e02 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -240,8 +240,13 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask)
case PKT_TX_SCTP_CKSUM: return "PKT_TX_SCTP_CKSUM";
case PKT_TX_UDP_CKSUM: return "PKT_TX_UDP_CKSUM";
case PKT_TX_IEEE1588_TMST: return "PKT_TX_IEEE1588_TMST";
- case PKT_TX_VXLAN_CKSUM: return "PKT_TX_VXLAN_CKSUM";
+ case PKT_TX_UDP_TUNNEL_PKT: return "PKT_TX_UDP_TUNNEL_PKT";
case PKT_TX_TCP_SEG: return "PKT_TX_TCP_SEG";
+ case PKT_TX_IPV4: return "PKT_TX_IPV4";
+ case PKT_TX_IPV6: return "PKT_TX_IPV6";
+ case PKT_TX_OUTER_IP_CKSUM: return "PKT_TX_OUTER_IP_CKSUM";
+ case PKT_TX_OUTER_IPV4: return "PKT_TX_OUTER_IPV4";
+ case PKT_TX_OUTER_IPV6: return "PKT_TX_OUTER_IPV6";
default: return NULL;
}
}
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index cbadf8e..6eb898f 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -118,7 +118,7 @@ extern "C" {
*/
#define PKT_TX_TCP_SEG (1ULL << 49)
-#define PKT_TX_VXLAN_CKSUM (1ULL << 50) /**< TX checksum of VXLAN computed by NIC */
+#define PKT_TX_UDP_TUNNEL_PKT (1ULL << 50) /**< TX packet is an UDP tunneling packet */
#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
/**
@@ -149,6 +149,15 @@ extern "C" {
#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */
+/** Outer IP checksum of TX packet, computed by NIC for tunneling packet */
+#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58)
+
+/** Packet is outer IPv4 without requiring IP checksum offload for tunneling packet. */
+#define PKT_TX_OUTER_IPV4 (1ULL << 59)
+
+/** Tell the NIC it's an outer IPv6 packet for tunneling packet */
+#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+
/* Use final bit of flags to indicate a control mbuf */
#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 2d2ef04..078e973 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -478,7 +478,7 @@ i40e_txd_enable_checksum(uint64_t ol_flags,
}
/* VXLAN packet TX checksum offload */
- if (unlikely(ol_flags & PKT_TX_VXLAN_CKSUM)) {
+ if (unlikely(ol_flags & PKT_TX_UDP_TUNNEL_PKT)) {
uint8_t l4tun_len;
l4tun_len = ETHER_VXLAN_HLEN + inner_l2_len;
@@ -1158,8 +1158,8 @@ i40e_calc_context_desc(uint64_t flags)
{
uint64_t mask = 0ULL;
- if (flags | PKT_TX_VXLAN_CKSUM)
- mask |= PKT_TX_VXLAN_CKSUM;
+ if (flags | PKT_TX_UDP_TUNNEL_PKT)
+ mask |= PKT_TX_UDP_TUNNEL_PKT;
#ifdef RTE_LIBRTE_IEEE1588
mask |= PKT_TX_IEEE1588_TMST;
--
1.7.7.6
next prev parent reply other threads:[~2014-12-02 15:06 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-02 15:06 [dpdk-dev] [PATCH v5 0/3] i40e VXLAN TX checksum rework Jijiang Liu
2014-12-02 15:06 ` [dpdk-dev] [PATCH v5 1/3] mbuf:redefine three TX ol_flags Jijiang Liu
2014-12-03 11:35 ` Olivier MATZ
2014-12-02 15:06 ` Jijiang Liu [this message]
2014-12-03 11:41 ` [dpdk-dev] [PATCH v5 2/3] mbuf:add three TX ol_flags and repalce PKT_TX_VXLAN_CKSUM Olivier MATZ
2014-12-03 12:59 ` Ananyev, Konstantin
2014-12-03 14:41 ` Olivier MATZ
2014-12-04 2:08 ` Liu, Jijiang
2014-12-04 10:23 ` Ananyev, Konstantin
2014-12-04 10:45 ` Thomas Monjalon
2014-12-04 11:03 ` Ananyev, Konstantin
2014-12-04 13:51 ` Olivier MATZ
2014-12-04 22:56 ` Ananyev, Konstantin
2014-12-05 4:17 ` Liu, Jijiang
2014-12-04 6:52 ` Zhang, Helin
2014-12-04 7:52 ` Liu, Jijiang
2014-12-04 10:19 ` Ananyev, Konstantin
2014-12-04 13:47 ` Olivier MATZ
2014-12-04 21:42 ` Ananyev, Konstantin
2014-12-05 1:15 ` Zhang, Helin
2014-12-05 11:11 ` Olivier MATZ
2014-12-02 15:06 ` [dpdk-dev] [PATCH v5 3/3] mbuf:replace the inner_l2_len and the inner_l3_len fields Jijiang Liu
2014-12-03 11:45 ` Olivier MATZ
2014-12-05 11:12 ` Olivier MATZ
2014-12-02 15:40 ` [dpdk-dev] [PATCH v5 0/3] i40e VXLAN TX checksum rework Ananyev, Konstantin
2014-12-05 16:07 ` Thomas Monjalon
2014-12-07 11:46 ` Ananyev, Konstantin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417532767-1309-3-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).