From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] ixgbe: fix multi-process support
Date: Thu, 4 Dec 2014 11:47:30 +0000 [thread overview]
Message-ID: <1417693650-9813-1-git-send-email-bruce.richardson@intel.com> (raw)
When using multiple processes, the TX function used in all processes
should be the same, otherwise the secondary processes cannot transmit
more than tx-ring-size - 1 packets.
To achieve this, we extract out the code to select the ixgbe TX function
to be used into a separate function inside the ixgbe driver, and call
that from a secondary process when it is attaching to an
already-configured NIC.
Testing with symmetric MP app shows that we are able to RX and TX from
both primary and secondary processes once this patch is applied.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 7 +++-
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 61 +++++++++++++++++++++--------------
lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 7 ++++
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 3 ++
4 files changed, 52 insertions(+), 26 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 937fc3c..4abab25 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -68,6 +68,7 @@
#include "ixgbe/ixgbe_common.h"
#include "ixgbe_ethdev.h"
#include "ixgbe_bypass.h"
+#include "ixgbe_rxtx.h"
/*
* High threshold controlling when to start sending XOFF frames. Must be at
@@ -743,8 +744,12 @@ eth_ixgbe_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
/* for secondary processes, we don't initialise any further as primary
* has already done this work. Only check we don't need a different
- * RX function */
+ * RX and TX function */
if (rte_eal_process_type() != RTE_PROC_PRIMARY){
+ struct igb_tx_queue *txq;
+ txq = eth_dev->data->tx_queues[eth_dev->data->nb_tx_queues-1];
+ set_tx_function(eth_dev, txq);
+
if (eth_dev->data->scattered_rx)
eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
return 0;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 5c36bff..263c815 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1771,6 +1771,40 @@ static struct ixgbe_txq_ops def_txq_ops = {
.reset = ixgbe_reset_tx_queue,
};
+/* takes an ethdev and a queue and sets up the tx function to be used based on
+ * the queue parameters. Used in tx_queue_setup by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev
+ */
+void
+set_tx_function(struct rte_eth_dev* dev, struct igb_tx_queue* txq)
+{
+ /* Use a simple Tx queue (no offloads, no multi segs) if possible */
+ if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
+ && (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
+ PMD_INIT_LOG(INFO, "Using simple tx code path");
+#ifdef RTE_IXGBE_INC_VECTOR
+ if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
+ ixgbe_txq_vec_setup(txq) == 0) {
+ PMD_INIT_LOG(INFO, "Vector tx enabled.");
+ dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
+ }
+ else
+#endif
+ dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
+ } else {
+ PMD_INIT_LOG(INFO, "Using full-featured tx code path");
+ PMD_INIT_LOG(INFO,
+ " - txq_flags = %lx " "[IXGBE_SIMPLE_FLAGS=%lx]",
+ (long unsigned )txq->txq_flags,
+ (long unsigned)IXGBE_SIMPLE_FLAGS);
+ PMD_INIT_LOG(INFO,
+ " - tx_rs_thresh = %lu " "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
+ (long unsigned )txq->tx_rs_thresh,
+ (long unsigned)RTE_PMD_IXGBE_TX_MAX_BURST);
+ dev->tx_pkt_burst = ixgbe_xmit_pkts;
+ }
+}
+
int
ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
uint16_t queue_idx,
@@ -1933,31 +1967,8 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64,
txq->sw_ring, txq->tx_ring, txq->tx_ring_phys_addr);
- /* Use a simple Tx queue (no offloads, no multi segs) if possible */
- if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS) &&
- (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
- PMD_INIT_LOG(INFO, "Using simple tx code path");
-#ifdef RTE_IXGBE_INC_VECTOR
- if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
- ixgbe_txq_vec_setup(txq) == 0) {
- PMD_INIT_LOG(INFO, "Vector tx enabled.");
- dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
- }
- else
-#endif
- dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
- } else {
- PMD_INIT_LOG(INFO, "Using full-featured tx code path");
- PMD_INIT_LOG(INFO, " - txq_flags = %lx "
- "[IXGBE_SIMPLE_FLAGS=%lx]",
- (long unsigned)txq->txq_flags,
- (long unsigned)IXGBE_SIMPLE_FLAGS);
- PMD_INIT_LOG(INFO, " - tx_rs_thresh = %lu "
- "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
- (long unsigned)txq->tx_rs_thresh,
- (long unsigned)RTE_PMD_IXGBE_TX_MAX_BURST);
- dev->tx_pkt_burst = ixgbe_xmit_pkts;
- }
+ /* set up vector or scalar TX function as appropriate */
+ set_tx_function(dev, txq);
txq->ops->reset(txq);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
index 13099af..873656d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
@@ -248,6 +248,13 @@ struct ixgbe_txq_ops {
IXGBE_ADVTXD_DCMD_DEXT |\
IXGBE_ADVTXD_DCMD_EOP)
+
+/* takes an ethdev and a queue and sets up the tx function to be used based on
+ * the queue parameters. Used in tx_queue_setup by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev
+ */
+void set_tx_function(struct rte_eth_dev* dev, struct igb_tx_queue* txq);
+
#ifdef RTE_IXGBE_INC_VECTOR
uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
index 579bc46..6755fad 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
@@ -748,6 +748,9 @@ int ixgbe_txq_vec_setup(struct igb_tx_queue *txq)
if (txq->sw_ring == NULL)
return -1;
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
/* leave the first one for overflow */
txq->sw_ring = (struct igb_tx_entry *)
((struct igb_tx_entry_v *)txq->sw_ring + 1);
--
1.9.3
next reply other threads:[~2014-12-04 11:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 11:47 Bruce Richardson [this message]
2014-12-05 8:52 ` Qiu, Michael
2014-12-05 13:46 ` [dpdk-dev] [PATCH v2] " Bruce Richardson
2014-12-10 13:56 ` Thomas Monjalon
2014-12-11 16:58 ` Pattan, Reshma
2014-12-11 17:07 ` Bruce Richardson
2014-12-17 0:02 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417693650-9813-1-git-send-email-bruce.richardson@intel.com \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).