DPDK patches and discussions
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3] mbuf: fix of enabling all newly added RX error flags
Date: Sat,  6 Dec 2014 09:33:37 +0800	[thread overview]
Message-ID: <1417829617-7185-1-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1417743988-15604-1-git-send-email-helin.zhang@intel.com>

Before redefining mbuf structure, there was lack of free bits in 'ol_flags'
(32 bits in total) for new RX or TX flags. So it tried to reuse existant
bits as most as possible, or even assigning 0 to some of bit flags. After
new mbuf structure defined, there are quite a lot of free bits. So those
newly added bit flags should be assigned with correct and valid bit values,
and getting their names should be enabled as well. Note that 'RECIP' should
be removed, as nowhere will use it. 'PKT_RX_ERR' is defined to replace all
other error bit flags, e.g. MAC error, Oversize error, header buffer
overflow error.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 lib/librte_mbuf/rte_mbuf.c      |  7 ++-----
 lib/librte_mbuf/rte_mbuf.h      |  7 ++-----
 lib/librte_pmd_i40e/i40e_rxtx.c | 15 ++++-----------
 3 files changed, 8 insertions(+), 21 deletions(-)

v2 changes:
* Removed error flag of 'ECIPE' processing only in both i40e PMD and mbuf. All
  other error flags were added back.
* Assigned error flags with correct and valid values, as their previous values
  were invalid.
* Enabled getting all error flag names.

v3 changes:
* 'PKT_RX_ERR' is defined to replace error bit flags of MAC error, Oversize
  error, header buffer overflow error.
* Removed assigning values to PKT_TX_* bit flags, as it has already been done
  in another packet set.

diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 1b14e02..5e6b5d0 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -210,11 +210,8 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask)
 	case PKT_RX_FDIR: return "PKT_RX_FDIR";
 	case PKT_RX_L4_CKSUM_BAD: return "PKT_RX_L4_CKSUM_BAD";
 	case PKT_RX_IP_CKSUM_BAD: return "PKT_RX_IP_CKSUM_BAD";
-	/* case PKT_RX_EIP_CKSUM_BAD: return "PKT_RX_EIP_CKSUM_BAD"; */
-	/* case PKT_RX_OVERSIZE: return "PKT_RX_OVERSIZE"; */
-	/* case PKT_RX_HBUF_OVERFLOW: return "PKT_RX_HBUF_OVERFLOW"; */
-	/* case PKT_RX_RECIP_ERR: return "PKT_RX_RECIP_ERR"; */
-	/* case PKT_RX_MAC_ERR: return "PKT_RX_MAC_ERR"; */
+	case PKT_RX_EIP_CKSUM_BAD: return "PKT_RX_EIP_CKSUM_BAD";
+	case PKT_RX_ERR: return "PKT_RX_ERR";
 	case PKT_RX_IPV4_HDR: return "PKT_RX_IPV4_HDR";
 	case PKT_RX_IPV4_HDR_EXT: return "PKT_RX_IPV4_HDR_EXT";
 	case PKT_RX_IPV6_HDR: return "PKT_RX_IPV6_HDR";
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index efdefc4..5e647a9 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -84,11 +84,6 @@ extern "C" {
 #define PKT_RX_FDIR          (1ULL << 2)  /**< RX packet with FDIR match indicate. */
 #define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)  /**< L4 cksum of RX pkt. is not OK. */
 #define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)  /**< IP cksum of RX pkt. is not OK. */
-#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0)  /**< External IP header checksum error. */
-#define PKT_RX_OVERSIZE      (0ULL << 0)  /**< Num of desc of an RX pkt oversize. */
-#define PKT_RX_HBUF_OVERFLOW (0ULL << 0)  /**< Header buffer overflow. */
-#define PKT_RX_RECIP_ERR     (0ULL << 0)  /**< Hardware processing error. */
-#define PKT_RX_MAC_ERR       (0ULL << 0)  /**< MAC error. */
 #define PKT_RX_IPV4_HDR      (1ULL << 5)  /**< RX packet with IPv4 header. */
 #define PKT_RX_IPV4_HDR_EXT  (1ULL << 6)  /**< RX packet with extended IPv4 header. */
 #define PKT_RX_IPV6_HDR      (1ULL << 7)  /**< RX packet with IPv6 header. */
@@ -99,6 +94,8 @@ extern "C" {
 #define PKT_RX_TUNNEL_IPV6_HDR (1ULL << 12) /**< RX tunnel packet with IPv6 header. */
 #define PKT_RX_FDIR_ID       (1ULL << 13) /**< FD id reported if FDIR match. */
 #define PKT_RX_FDIR_FLX      (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 15)  /**< External IP header checksum error. */
+#define PKT_RX_ERR           (1ULL << 16)  /**< Other errors, e.g. MAC error. */
 /* add new RX flags here */
 
 /* add new TX flags here */
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 2beae3c..5d99bd2 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -123,25 +123,18 @@ i40e_rxd_error_to_pkt_flags(uint64_t qword)
 		return flags;
 	/* If RXE bit set, all other status bits are meaningless */
 	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_RXE_SHIFT))) {
-		flags |= PKT_RX_MAC_ERR;
+		flags |= PKT_RX_ERR;
 		return flags;
 	}
-
-	/* If RECIPE bit set, all other status indications should be ignored */
-	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_RECIPE_SHIFT))) {
-		flags |= PKT_RX_RECIP_ERR;
-		return flags;
-	}
-	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_HBO_SHIFT)))
-		flags |= PKT_RX_HBUF_OVERFLOW;
 	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_IPE_SHIFT)))
 		flags |= PKT_RX_IP_CKSUM_BAD;
 	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_L4E_SHIFT)))
 		flags |= PKT_RX_L4_CKSUM_BAD;
 	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_EIPE_SHIFT)))
 		flags |= PKT_RX_EIP_CKSUM_BAD;
-	if (unlikely(error_bits & (1 << I40E_RX_DESC_ERROR_OVERSIZE_SHIFT)))
-		flags |= PKT_RX_OVERSIZE;
+	if (unlikely(error_bits & ((1 << I40E_RX_DESC_ERROR_OVERSIZE_SHIFT) ||
+					(1 << I40E_RX_DESC_ERROR_HBO_SHIFT))))
+		flags |= PKT_RX_ERR;
 
 	return flags;
 }
-- 
1.9.3

  parent reply	other threads:[~2014-12-06  1:33 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-26  6:07 [dpdk-dev] [PATCH] i40e: Use one bit flag for all hardware detected RX packet errors Helin Zhang
2014-11-26 10:49 ` Ananyev, Konstantin
2014-11-26 11:22   ` Olivier MATZ
2014-11-26 13:38     ` Ananyev, Konstantin
2014-11-26 14:12       ` Olivier MATZ
2014-11-28  8:07         ` Zhang, Helin
2014-11-28  8:47           ` Olivier MATZ
2014-12-01  1:57             ` Zhang, Helin
2014-12-01  9:58               ` Olivier MATZ
2014-12-02  7:25                 ` Zhang, Helin
2014-12-05  1:46 ` [dpdk-dev] [PATCH v2 0/2] fix of enabling all newly added error flags Helin Zhang
2014-12-05  1:46   ` [dpdk-dev] [PATCH v2 1/2] i40e: remove checking rxd flag which is not public Helin Zhang
2014-12-05  1:46   ` [dpdk-dev] [PATCH v2 2/2] mbuf: assign valid bit values for some RX and TX flags Helin Zhang
2014-12-05 10:49     ` Ananyev, Konstantin
2014-12-06  0:42       ` Zhang, Helin
2014-12-06  1:07       ` Zhang, Helin
2014-12-08 10:55         ` Ananyev, Konstantin
2014-12-09  2:29           ` Zhang, Helin
2014-12-06  1:33   ` Helin Zhang [this message]
2014-12-08 10:44     ` [dpdk-dev] [PATCH v3] mbuf: fix of enabling all newly added RX error flags Ananyev, Konstantin
2014-12-09  2:23       ` Zhang, Helin
2014-12-08 10:50     ` Thomas Monjalon
2014-12-09  2:14       ` Zhang, Helin
2014-12-09  6:22         ` Thomas Monjalon
2014-12-10  8:55     ` [dpdk-dev] [PATCH v4] " Helin Zhang
2014-12-10  9:35       ` Thomas Monjalon
2014-12-10 13:50         ` Zhang, Helin
2014-12-10 15:26           ` Thomas Monjalon
2014-12-10 22:29             ` Zhang, Helin
2014-12-11 11:16               ` Olivier MATZ
2014-12-12  1:27                 ` Zhang, Helin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417829617-7185-1-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).