From: Ouyang Changchun <changchun.ouyang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC PATCH 14/17] virtio: Add suport for multiple mac addresses
Date: Mon, 8 Dec 2014 14:21:53 +0800 [thread overview]
Message-ID: <1418019716-4962-15-git-send-email-changchun.ouyang@intel.com> (raw)
In-Reply-To: <1418019716-4962-1-git-send-email-changchun.ouyang@intel.com>
Virtio support multiple MAC addresses.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
lib/librte_pmd_virtio/virtio_ethdev.c | 94 ++++++++++++++++++++++++++++++++++-
lib/librte_pmd_virtio/virtio_ethdev.h | 3 +-
lib/librte_pmd_virtio/virtqueue.h | 34 ++++++++++++-
3 files changed, 127 insertions(+), 4 deletions(-)
diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c b/lib/librte_pmd_virtio/virtio_ethdev.c
index ec5a51e..e469ac2 100644
--- a/lib/librte_pmd_virtio/virtio_ethdev.c
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c
@@ -86,6 +86,10 @@ static void virtio_dev_stats_reset(struct rte_eth_dev *dev);
static void virtio_dev_free_mbufs(struct rte_eth_dev *dev);
static int virtio_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
+static void virtio_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index, uint32_t vmdq __rte_unused);
+static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
static int virtio_dev_queue_stats_mapping_set(
__rte_unused struct rte_eth_dev *eth_dev,
@@ -503,8 +507,6 @@ static struct eth_dev_ops virtio_eth_dev_ops = {
.stats_get = virtio_dev_stats_get,
.stats_reset = virtio_dev_stats_reset,
.link_update = virtio_dev_link_update,
- .mac_addr_add = NULL,
- .mac_addr_remove = NULL,
.rx_queue_setup = virtio_dev_rx_queue_setup,
/* meaningfull only to multiple queue */
.rx_queue_release = virtio_dev_rx_queue_release,
@@ -514,6 +516,8 @@ static struct eth_dev_ops virtio_eth_dev_ops = {
/* collect stats per queue */
.queue_stats_mapping_set = virtio_dev_queue_stats_mapping_set,
.vlan_filter_set = virtio_vlan_filter_set,
+ .mac_addr_add = virtio_mac_addr_add,
+ .mac_addr_remove = virtio_mac_addr_remove,
};
static inline int
@@ -644,6 +648,92 @@ virtio_get_hwaddr(struct virtio_hw *hw)
}
static int
+virtio_mac_table_set(struct virtio_hw *hw,
+ const struct virtio_net_ctrl_mac *uc,
+ const struct virtio_net_ctrl_mac *mc)
+{
+ struct virtio_pmd_ctrl ctrl;
+ int err, len[2];
+
+ ctrl.hdr.class = VIRTIO_NET_CTRL_MAC;
+ ctrl.hdr.cmd = VIRTIO_NET_CTRL_MAC_TABLE_SET;
+
+ len[0] = uc->entries * ETHER_ADDR_LEN + sizeof(uc->entries);
+ memcpy(ctrl.data, uc, len[0]);
+
+ len[1] = mc->entries * ETHER_ADDR_LEN + sizeof(mc->entries);
+ memcpy(ctrl.data + len[0], mc, len[1]);
+
+ err = virtio_send_command(hw->cvq, &ctrl, len, 2);
+ if (err != 0)
+ PMD_DRV_LOG(NOTICE, "mac table set failed: %d", err);
+
+ return err;
+}
+
+static void
+virtio_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, uint32_t vmdq __rte_unused)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+ const struct ether_addr *addrs = dev->data->mac_addrs;
+ unsigned int i;
+ struct virtio_net_ctrl_mac *uc, *mc;
+
+ if (index >= VIRTIO_MAX_MAC_ADDRS) {
+ PMD_DRV_LOG(ERR, "mac address index %u out of range", index);
+ return;
+ }
+
+ uc = alloca(VIRTIO_MAX_MAC_ADDRS * ETHER_ADDR_LEN + sizeof(uc->entries));
+ uc->entries = 0;
+ mc = alloca(VIRTIO_MAX_MAC_ADDRS * ETHER_ADDR_LEN + sizeof(mc->entries));
+ mc->entries = 0;
+
+ for (i = 0; i < VIRTIO_MAX_MAC_ADDRS; i++) {
+ const struct ether_addr *addr
+ = (i == index) ? mac_addr : addrs + i;
+ struct virtio_net_ctrl_mac *tbl
+ = is_multicast_ether_addr(addr) ? mc : uc;
+
+ memcpy(&tbl->macs[tbl->entries++], addr, ETHER_ADDR_LEN);
+ }
+
+ virtio_mac_table_set(hw, uc, mc);
+}
+
+static void
+virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+ struct ether_addr *addrs = dev->data->mac_addrs;
+ struct virtio_net_ctrl_mac *uc, *mc;
+ unsigned int i;
+
+ if (index >= VIRTIO_MAX_MAC_ADDRS) {
+ PMD_DRV_LOG(ERR, "mac address index %u out of range", index);
+ return;
+ }
+
+ uc = alloca(VIRTIO_MAX_MAC_ADDRS * ETHER_ADDR_LEN + sizeof(uc->entries));
+ uc->entries = 0;
+ mc = alloca(VIRTIO_MAX_MAC_ADDRS * ETHER_ADDR_LEN + sizeof(mc->entries));
+ mc->entries = 0;
+
+ for (i = 0; i < VIRTIO_MAX_MAC_ADDRS; i++) {
+ struct virtio_net_ctrl_mac *tbl;
+
+ if (i == index || is_zero_ether_addr(addrs + i))
+ continue;
+
+ tbl = is_multicast_ether_addr(addrs + i) ? mc : uc;
+ memcpy(&tbl->macs[tbl->entries++], addrs + i, ETHER_ADDR_LEN);
+ }
+
+ virtio_mac_table_set(hw, uc, mc);
+}
+
+static int
virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct virtio_hw *hw = dev->data->dev_private;
diff --git a/lib/librte_pmd_virtio/virtio_ethdev.h b/lib/librte_pmd_virtio/virtio_ethdev.h
index 55c9749..74ac7e0 100644
--- a/lib/librte_pmd_virtio/virtio_ethdev.h
+++ b/lib/librte_pmd_virtio/virtio_ethdev.h
@@ -51,7 +51,7 @@
#define VIRTIO_MAX_RX_QUEUES 128
#define VIRTIO_MAX_TX_QUEUES 128
-#define VIRTIO_MAX_MAC_ADDRS 1
+#define VIRTIO_MAX_MAC_ADDRS 64
#define VIRTIO_MIN_RX_BUFSIZE 64
#define VIRTIO_MAX_RX_PKTLEN 9728
@@ -60,6 +60,7 @@
(VIRTIO_NET_F_MAC | \
VIRTIO_NET_F_STATUS | \
VIRTIO_NET_F_MQ | \
+ VIRTIO_NET_F_CTRL_MAC_ADDR | \
VIRTIO_NET_F_CTRL_VQ | \
VIRTIO_NET_F_CTRL_RX | \
VIRTIO_NET_F_CTRL_VLAN | \
diff --git a/lib/librte_pmd_virtio/virtqueue.h b/lib/librte_pmd_virtio/virtqueue.h
index 5b8a255..4cb82f9 100644
--- a/lib/librte_pmd_virtio/virtqueue.h
+++ b/lib/librte_pmd_virtio/virtqueue.h
@@ -99,6 +99,34 @@ enum { VTNET_RQ = 0, VTNET_TQ = 1, VTNET_CQ = 2 };
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
/**
+ * Control the MAC
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite. Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists. Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
+ */
+struct virtio_net_ctrl_mac {
+ uint32_t entries;
+ uint8_t macs[][ETHER_ADDR_LEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC 1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+
+/**
* Control VLAN filtering
*
* The VLAN filter table is controlled via a simple ADD/DEL interface.
@@ -121,7 +149,7 @@ typedef uint8_t virtio_net_ctrl_ack;
#define VIRTIO_NET_OK 0
#define VIRTIO_NET_ERR 1
-#define VIRTIO_MAX_CTRL_DATA 128
+#define VIRTIO_MAX_CTRL_DATA 2048
struct virtio_pmd_ctrl {
struct virtio_net_ctrl_hdr hdr;
@@ -180,6 +208,10 @@ struct virtqueue {
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
#endif
+#ifndef VIRTIO_NET_F_CTRL_MAC_ADDR
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 0x800000
+#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+#endif
/**
* This is the first element of the scatter-gather list. If you don't
--
1.8.4.2
next prev parent reply other threads:[~2014-12-08 6:22 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 6:21 [dpdk-dev] [RFC PATCH 00/17] Single virtio implementation Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 01/17] virtio: Rearrange resource initialization Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 02/17] virtio: Use weaker barriers Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 03/17] virtio: Allow starting with link down Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 04/17] virtio: Add support for Link State interrupt Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 05/17] ether: Add soft vlan encap/decap functions Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 06/17] virtio: Use software vlan stripping Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 07/17] virtio: Remove unnecessary adapter structure Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 08/17] virtio: Remove redundant vq_alignment Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 09/17] virtio: Fix how states are handled during initialization Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 10/17] virtio: Make vtpci_get_status local Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 11/17] virtio: Check for packet headroom at compile time Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 12/17] virtio: Move allocation before initialization Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 13/17] virtio: Add support for vlan filtering Ouyang Changchun
2014-12-08 6:21 ` Ouyang Changchun [this message]
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 15/17] virtio: Add ability to set MAC address Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 16/17] virtio: Free mbuf's with threshold Ouyang Changchun
2014-12-08 6:21 ` [dpdk-dev] [RFC PATCH 17/17] virtio: Use port IO to get PCI resource Ouyang Changchun
2014-12-08 9:30 ` [dpdk-dev] [RFC PATCH 00/17] Single virtio implementation Thomas Monjalon
2014-12-09 1:08 ` Ouyang, Changchun
2014-12-09 3:23 ` Qiu, Michael
2014-12-09 5:24 ` Stephen Hemminger
2014-12-09 5:41 ` Ouyang, Changchun
2014-12-09 6:11 ` Thomas Monjalon
2014-12-09 6:40 ` Ouyang, Changchun
2014-12-09 8:53 ` Thomas Monjalon
2014-12-09 9:46 ` Bruce Richardson
2014-12-09 14:08 ` Ouyang, Changchun
2014-12-09 16:03 ` Qiu, Michael
2014-12-10 0:29 ` Ouyang, Changchun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418019716-4962-15-git-send-email-changchun.ouyang@intel.com \
--to=changchun.ouyang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).