From: Cunming Liang <cunming.liang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC PATCH 6/7] sample: add new sample for multi-pthread
Date: Thu, 11 Dec 2014 10:04:49 +0800 [thread overview]
Message-ID: <1418263490-21088-7-git-send-email-cunming.liang@intel.com> (raw)
In-Reply-To: <1418263490-21088-1-git-send-email-cunming.liang@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
examples/multi-pthread/Makefile | 57 ++++++++++
examples/multi-pthread/main.c | 232 ++++++++++++++++++++++++++++++++++++++++
examples/multi-pthread/main.h | 46 ++++++++
3 files changed, 335 insertions(+)
create mode 100644 examples/multi-pthread/Makefile
create mode 100644 examples/multi-pthread/main.c
create mode 100644 examples/multi-pthread/main.h
diff --git a/examples/multi-pthread/Makefile b/examples/multi-pthread/Makefile
new file mode 100644
index 0000000..6d75212
--- /dev/null
+++ b/examples/multi-pthread/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = multi-pthread
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -D_GNU_SOURCE # $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+EXTRA_CFLAGS += -O3 -g -Wfatal-errors
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/multi-pthread/main.c b/examples/multi-pthread/main.c
new file mode 100644
index 0000000..10cb4ad
--- /dev/null
+++ b/examples/multi-pthread/main.c
@@ -0,0 +1,232 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+#include "main.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+
+#include <pthread.h>
+#include <sched.h>
+
+#define RX_RING_SIZE 512
+#define TX_RING_SIZE 512
+
+#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
+ ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+ ETH_TXQ_FLAGS_NOXSUMTCP)
+
+#define NUM_MBUFS 8191
+#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+
+static struct rte_eth_conf port_conf_default = {
+ .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN, },
+};
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ struct rte_eth_conf port_conf = port_conf_default;
+ const uint16_t rxRings = 1, txRings = 1;
+ struct rte_eth_dev_info info;
+ int retval;
+ uint16_t q;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ rte_eth_dev_info_get(port, &info);
+
+ for (q = 0; q < rxRings; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+ rte_eth_dev_socket_id(port),
+ &info.default_rxconf, mbuf_pool);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* override default TX queue flags to disable offloads for faster TX */
+ info.default_txconf.txq_flags = TX_Q_FLAGS;
+ for (q = 0; q < txRings; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+ rte_eth_dev_socket_id(port),
+ &info.default_txconf);
+ if (retval < 0)
+ return retval;
+ }
+
+ retval = rte_eth_dev_start(port);
+ if (retval < 0)
+ return retval;
+
+ struct ether_addr addr;
+ rte_eth_macaddr_get(port, &addr);
+ printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ addr.addr_bytes[0], addr.addr_bytes[1],
+ addr.addr_bytes[2], addr.addr_bytes[3],
+ addr.addr_bytes[4], addr.addr_bytes[5]);
+
+ rte_eth_promiscuous_enable(port);
+
+ return 0;
+}
+
+int pthread_yield(void);
+static void*
+work(void *arg)
+{
+ struct rte_mbuf *bufs[BURST_SIZE];
+ uint16_t nb_rx, nb_tx;
+ uint64_t port = (uint64_t)arg;
+ uint16_t YIELD_THRESH = BURST_SIZE / 2;
+ uint16_t SLEEP_USEC = 100;
+
+ if (rte_pthread_prepare() < 0)
+ return;
+
+ while (1) {
+ nb_rx = rte_eth_rx_burst(port, 0,
+ bufs, BURST_SIZE);
+ if (unlikely(nb_rx == 0)){
+ usleep(SLEEP_USEC);
+ continue;
+ } else if (unlikely(nb_rx <= YIELD_THRESH))
+ pthread_yield();
+
+ nb_tx = rte_eth_tx_burst(port ^ 1, 0,
+ bufs, nb_rx);
+ if (unlikely(nb_tx < nb_rx)) {
+ uint16_t buf;
+ for (buf = nb_tx; buf < nb_rx; buf++)
+ rte_pktmbuf_free(bufs[buf]);
+ }
+ };
+ rte_pthread_cleanup();
+}
+
+/*
+ * Main thread that does the work, reading from INPUT_PORT
+ * and writing to OUTPUT_PORT
+ */
+static void
+lcore_main(void)
+{
+ const uint64_t nb_ports = rte_eth_dev_count();
+ uint64_t port, i;
+ pthread_t tid[RTE_MAX_ETHPORTS];
+
+ memset(tid, 0, sizeof(tid));
+
+ for (port = 0; port < nb_ports; port++)
+ if (rte_eth_dev_socket_id(port) > 0 &&
+ rte_eth_dev_socket_id(port) !=
+ (int)rte_socket_id())
+ printf("WARNING, port %"PRIu64" is on remote "
+ "NUMA node to polling thread.\n\t"
+ "Performance will not be optimal.\n", port);
+
+ printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
+ rte_lcore_id());
+
+ for (port = 0; port < nb_ports; port++) {
+ if (rte_pthread_create(&tid[port], work,
+ (void *)port) != 0)
+ break;
+ }
+
+ for (i = 0; i < port; i++)
+ (void)pthread_join(tid[i], NULL);
+}
+
+/* Main function, does initialisation and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool;
+ unsigned nb_ports;
+ uint8_t portid;
+
+ /* init EAL */
+ int ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports < 2 || (nb_ports & 1))
+ rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
+
+ mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+ MBUF_SIZE, MBUF_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++)
+ if (port_init(portid, mbuf_pool) != 0)
+ rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n",
+ portid);
+
+ if (rte_lcore_count() > 1)
+ printf("\nWARNING: Coremask too big - App uses only 1 lcore\n");
+
+ /* call lcore_main on master core only */
+ lcore_main();
+ return 0;
+}
diff --git a/examples/multi-pthread/main.h b/examples/multi-pthread/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/multi-pthread/main.h
@@ -0,0 +1,46 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
--
1.8.1.4
next prev parent reply other threads:[~2014-12-11 2:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-11 2:04 [dpdk-dev] [RFC PATCH 0/7] support multi-phtread per lcore Cunming Liang
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 1/7] eal: add linear thread id as pthread-local variable Cunming Liang
2014-12-16 7:00 ` Qiu, Michael
2014-12-22 19:02 ` Ananyev, Konstantin
2014-12-23 9:56 ` Liang, Cunming
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 2/7] mempool: use linear-tid as mempool cache index Cunming Liang
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 3/7] ring: use linear-tid as ring debug stats index Cunming Liang
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 4/7] eal: add simple API for multi-pthread Cunming Liang
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 5/7] testpmd: support multi-pthread mode Cunming Liang
2014-12-11 2:04 ` Cunming Liang [this message]
2014-12-11 2:04 ` [dpdk-dev] [RFC PATCH 7/7] eal: macro for cpuset w/ or w/o CPU_ALLOC Cunming Liang
2014-12-11 2:54 ` [dpdk-dev] [RFC PATCH 0/7] support multi-phtread per lcore Jayakumar, Muthurajan
2014-12-11 9:56 ` Walukiewicz, Miroslaw
2014-12-12 5:44 ` Liang, Cunming
2014-12-15 11:10 ` Walukiewicz, Miroslaw
2014-12-15 11:53 ` Liang, Cunming
2014-12-18 12:20 ` Walukiewicz, Miroslaw
2014-12-18 14:32 ` Bruce Richardson
2014-12-18 15:11 ` Olivier MATZ
2014-12-18 16:04 ` Bruce Richardson
2014-12-18 16:15 ` Stephen Hemminger
2014-12-19 1:28 ` Liang, Cunming
2014-12-19 10:03 ` Bruce Richardson
2014-12-22 1:51 ` Liang, Cunming
2014-12-22 9:46 ` Bruce Richardson
2014-12-22 10:01 ` Walukiewicz, Miroslaw
2014-12-23 9:45 ` Liang, Cunming
2014-12-22 18:28 ` Stephen Hemminger
2014-12-23 9:19 ` Walukiewicz, Miroslaw
2014-12-23 9:23 ` Bruce Richardson
2014-12-23 9:51 ` Liang, Cunming
2015-01-08 17:05 ` Ananyev, Konstantin
2015-01-08 17:23 ` Richardson, Bruce
2015-01-09 9:51 ` Liang, Cunming
2015-01-09 9:40 ` Liang, Cunming
2015-01-09 11:52 ` Ananyev, Konstantin
2015-01-09 9:45 ` Liang, Cunming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418263490-21088-7-git-send-email-cunming.liang@intel.com \
--to=cunming.liang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).