From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Cc: tomaszx.kulasek@intel.com
Subject: [dpdk-dev] [PATCH 2/3] PMD ring MAC management, fix initialization, link up/down
Date: Fri, 12 Dec 2014 09:14:41 +0000 [thread overview]
Message-ID: <1418375682-4703-3-git-send-email-michalx.k.jastrzebski@intel.com> (raw)
In-Reply-To: <1418375682-4703-1-git-send-email-michalx.k.jastrzebski@intel.com>
* add MAC management per device
* fix initialization procedure
* add link up/down functions
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
---
lib/librte_pmd_ring/rte_eth_ring.c | 62 +++++++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 5 deletions(-)
diff --git a/lib/librte_pmd_ring/rte_eth_ring.c b/lib/librte_pmd_ring/rte_eth_ring.c
index 4f1b6ed..b6047cc 100644
--- a/lib/librte_pmd_ring/rte_eth_ring.c
+++ b/lib/librte_pmd_ring/rte_eth_ring.c
@@ -44,6 +44,8 @@
#define ETH_RING_ACTION_CREATE "CREATE"
#define ETH_RING_ACTION_ATTACH "ATTACH"
+static const char *ring_ethdev_driver_name = "Ring PMD";
+
static const char *valid_arguments[] = {
ETH_RING_NUMA_NODE_ACTION_ARG,
NULL
@@ -62,10 +64,11 @@ struct pmd_internals {
struct ring_queue rx_ring_queues[RTE_PMD_RING_MAX_RX_RINGS];
struct ring_queue tx_ring_queues[RTE_PMD_RING_MAX_TX_RINGS];
+
+ struct ether_addr address;
};
-static struct ether_addr eth_addr = { .addr_bytes = {0} };
static const char *drivername = "Rings PMD";
static struct rte_eth_link pmd_link = {
.link_speed = 10000,
@@ -121,6 +124,20 @@ eth_dev_stop(struct rte_eth_dev *dev)
}
static int
+eth_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ dev->data->dev_link.link_status = 0;
+ return 0;
+}
+
+static int
+eth_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ dev->data->dev_link.link_status = 1;
+ return 0;
+}
+
+static int
eth_rx_queue_setup(struct rte_eth_dev *dev,uint16_t rx_queue_id,
uint16_t nb_rx_desc __rte_unused,
unsigned int socket_id __rte_unused,
@@ -199,6 +216,20 @@ eth_stats_reset(struct rte_eth_dev *dev)
}
static void
+eth_mac_addr_remove(struct rte_eth_dev *dev __rte_unused,
+ uint32_t index __rte_unused)
+{
+}
+
+static void
+eth_mac_addr_add(struct rte_eth_dev *dev __rte_unused,
+ struct ether_addr *mac_addr __rte_unused,
+ uint32_t index __rte_unused,
+ uint32_t vmdq __rte_unused)
+{
+}
+
+static void
eth_queue_release(void *q __rte_unused) { ; }
static int
eth_link_update(struct rte_eth_dev *dev __rte_unused,
@@ -207,6 +238,8 @@ eth_link_update(struct rte_eth_dev *dev __rte_unused,
static struct eth_dev_ops ops = {
.dev_start = eth_dev_start,
.dev_stop = eth_dev_stop,
+ .dev_set_link_up = eth_dev_set_link_up,
+ .dev_set_link_down = eth_dev_set_link_down,
.dev_configure = eth_dev_configure,
.dev_infos_get = eth_dev_info,
.rx_queue_setup = eth_rx_queue_setup,
@@ -216,6 +249,8 @@ static struct eth_dev_ops ops = {
.link_update = eth_link_update,
.stats_get = eth_stats_get,
.stats_reset = eth_stats_reset,
+ .mac_addr_remove = eth_mac_addr_remove,
+ .mac_addr_add = eth_mac_addr_add,
};
int
@@ -229,6 +264,9 @@ rte_eth_from_rings(const char *name, struct rte_ring *const rx_queues[],
struct rte_pci_device *pci_dev = NULL;
struct pmd_internals *internals = NULL;
struct rte_eth_dev *eth_dev = NULL;
+ struct eth_driver *eth_drv = NULL;
+ struct rte_pci_id *id_table = NULL;
+
unsigned i;
/* do some parameter checking */
@@ -251,6 +289,10 @@ rte_eth_from_rings(const char *name, struct rte_ring *const rx_queues[],
if (pci_dev == NULL)
goto error;
+ id_table = rte_zmalloc_socket(name, sizeof(*id_table), 0, numa_node);
+ if (id_table == NULL)
+ goto error;
+
internals = rte_zmalloc_socket(name, sizeof(*internals), 0, numa_node);
if (internals == NULL)
goto error;
@@ -260,6 +302,10 @@ rte_eth_from_rings(const char *name, struct rte_ring *const rx_queues[],
if (eth_dev == NULL)
goto error;
+ eth_drv = rte_zmalloc_socket(name, sizeof(*eth_drv), 0, numa_node);
+ if (eth_drv == NULL)
+ goto error;
+
/* now put it all together
* - store queue data in internals,
* - store numa_node info in pci_driver
@@ -278,18 +324,24 @@ rte_eth_from_rings(const char *name, struct rte_ring *const rx_queues[],
internals->tx_ring_queues[i].rng = tx_queues[i];
}
+ eth_drv->pci_drv.name = ring_ethdev_driver_name;
+ eth_drv->pci_drv.id_table = id_table;
+
pci_dev->numa_node = numa_node;
+ pci_dev->driver = ð_drv->pci_drv;
data->dev_private = internals;
data->port_id = eth_dev->data->port_id;
data->nb_rx_queues = (uint16_t)nb_rx_queues;
data->nb_tx_queues = (uint16_t)nb_tx_queues;
data->dev_link = pmd_link;
- data->mac_addrs = ð_addr;
+ data->mac_addrs = &internals->address;
- eth_dev ->data = data;
- eth_dev ->dev_ops = &ops;
- eth_dev ->pci_dev = pci_dev;
+ eth_dev->data = data;
+ eth_dev->driver = eth_drv;
+ eth_dev->dev_ops = &ops;
+ eth_dev->pci_dev = pci_dev;
+ TAILQ_INIT(&(eth_dev->callbacks));
/* finally assign rx and tx ops */
eth_dev->rx_pkt_burst = eth_ring_rx;
--
1.7.9.5
next prev parent reply other threads:[~2014-12-12 9:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-12 9:14 [dpdk-dev] [PATCH 0/3] bond mode 4: add unit tests Michal Jastrzebski
2014-12-12 9:14 ` [dpdk-dev] [PATCH 1/3] bond change warning Michal Jastrzebski
2015-02-18 18:06 ` Thomas Monjalon
2014-12-12 9:14 ` Michal Jastrzebski [this message]
2015-01-15 10:53 ` [dpdk-dev] [PATCH 2/3] PMD ring MAC management, fix initialization, link up/down Thomas Monjalon
2015-01-19 11:56 ` [dpdk-dev] [PATCH v2 0/3] " Tomasz Kulasek
2015-01-19 11:56 ` [dpdk-dev] [PATCH v2 1/3] PMD Ring - Add link up/down functions Tomasz Kulasek
2015-01-19 11:56 ` [dpdk-dev] [PATCH v2 2/3] PMD Ring - Add MAC addr add/remove functions Tomasz Kulasek
2015-01-19 11:56 ` [dpdk-dev] [PATCH v2 3/3] PMD Ring - Fix for MAC per device management Tomasz Kulasek
2015-01-28 11:56 ` [dpdk-dev] [PATCH v2 0/3] PMD ring MAC management, fix initialization, link up/down Doherty, Declan
2015-02-18 17:33 ` Thomas Monjalon
2014-12-12 9:14 ` [dpdk-dev] [PATCH 3/3] unit tests add mode 4 unit test Michal Jastrzebski
2015-01-15 10:55 ` Thomas Monjalon
2015-01-19 12:43 ` [dpdk-dev] [PATCH v2 0/2] " Tomasz Kulasek
2015-01-19 12:43 ` [dpdk-dev] [PATCH v2 1/2] Unit tests - test.h rework Tomasz Kulasek
2015-01-19 12:43 ` [dpdk-dev] [PATCH v2 2/2] Unit tests for mode 4 Tomasz Kulasek
2015-01-29 8:51 ` [dpdk-dev] [PATCH v3 0/3] " Tomasz Kulasek
2015-01-29 8:51 ` [dpdk-dev] [PATCH v3 1/3] test: test.h rework Tomasz Kulasek
2015-01-29 8:51 ` [dpdk-dev] [PATCH v3 2/3] test: Unit tests for mode 4 Tomasz Kulasek
2015-02-12 11:49 ` Declan Doherty
2015-01-29 8:51 ` [dpdk-dev] [PATCH v3] mk: Link test app against librte_pmd_ring when needed Tomasz Kulasek
2015-02-12 11:50 ` Declan Doherty
2015-02-13 10:38 ` [dpdk-dev] [PATCH v4 0/4] Unit tests for mode 4 Tomasz Kulasek
2015-02-13 10:38 ` [dpdk-dev] [PATCH v4 1/4] test: test.h rework Tomasz Kulasek
2015-02-13 10:38 ` [dpdk-dev] [PATCH v4 2/4] test: Unit tests for mode 4 Tomasz Kulasek
2015-02-13 10:38 ` [dpdk-dev] [PATCH v4 3/4] mk: Link test app against librte_pmd_ring when needed Tomasz Kulasek
2015-02-13 10:38 ` [dpdk-dev] [PATCH v4 4/4] pmd_bond: Set routines required by test app global Tomasz Kulasek
2015-02-13 11:08 ` [dpdk-dev] [PATCH v4 0/4] Unit tests for mode 4 Declan Doherty
2015-02-18 18:00 ` Thomas Monjalon
2014-12-12 15:27 ` [dpdk-dev] [PATCH 0/3] bond mode 4: add unit tests Doherty, Declan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418375682-4703-3-git-send-email-michalx.k.jastrzebski@intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
--cc=tomaszx.kulasek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).