DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] i40e: workaround for X710 performance issues
@ 2014-12-15  7:09 Helin Zhang
  2014-12-15  7:56 ` [dpdk-dev] [PATCH v2] " Helin Zhang
  0 siblings, 1 reply; 15+ messages in thread
From: Helin Zhang @ 2014-12-15  7:09 UTC (permalink / raw)
  To: dev; +Cc: aaron.f.rowden

As the fixes of below performance issues on X710 may not be integrated
in latest version of firmware, a workaround in software PMD is needed.
It is to re-configure 3 specific registers after being initialized.
- Cannot achieve line rate on X710.
- Performance reduction when promiscuous mode is disabled.
Note that this workaround can be removed if the fixes are integrated
in the firmware in future.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 87 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 008d62c..adaab93 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -198,6 +198,7 @@ static int i40e_dev_filter_ctrl(struct rte_eth_dev *dev,
 				enum rte_filter_type filter_type,
 				enum rte_filter_op filter_op,
 				void *arg);
+static void i40e_configure_registers(struct i40e_hw *hw);
 
 /* Default hash key buffer for RSS */
 static uint32_t rss_key_default[I40E_PFQF_HKEY_MAX_INDEX + 1];
@@ -443,6 +444,15 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
 	/* Clear PXE mode */
 	i40e_clear_pxe_mode(hw);
 
+	/*
+	 * On X710, as old version of firmwares may have performance issues,
+	 * 3 registers need to be re-configured with new values. And the latest
+	 * version of firmware may not contain the fixes, workaround in SW
+	 * driver is needed. This workaround can be removed when the fixes are
+	 * integrated in firmware in future.
+	 */
+	i40e_configure_registers(hw);
+
 	/* Get hw capabilities */
 	ret = i40e_get_cap(hw);
 	if (ret != I40E_SUCCESS) {
@@ -5294,3 +5304,80 @@ i40e_pctype_to_flowtype(enum i40e_filter_pctype pctype)
 
 	return flowtype_table[pctype];
 }
+
+static int
+i40e_debug_read_register(struct i40e_hw *hw, uint32_t addr, uint64_t *val)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_debug_reg_read_write *cmd =
+		(struct i40e_aqc_debug_reg_read_write *)&desc.params.raw;
+	enum i40e_status_code status;
+
+	i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_debug_read_reg);
+	cmd->address = rte_cpu_to_le_32(addr);
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL);
+	if (status < 0)
+		return status;
+
+	*val = ((uint64_t)(rte_le_to_cpu_32(cmd->value_high)) << (CHAR_BIT *
+			sizeof(uint32_t))) + rte_le_to_cpu_32(cmd->value_low);
+
+	return status;
+}
+
+/*
+ * On X710, as old version of firmwares may have performance issues,
+ * 3 registers need to be re-configured with new values. And the latest version
+ * of firmware may not contain the fixes, workaround in SW driver is needed.
+ * This workaround can be removed when the fixes are integrated in firmware in
+ * future.
+ */
+static void
+i40e_configure_registers(struct i40e_hw *hw)
+{
+#define I40E_GL_SWR_PRI_JOIN_MAP_0       0x26CE00
+#define I40E_GL_SWR_PRI_JOIN_MAP_2       0x26CE08
+#define I40E_GL_SWR_PM_UP_THR            0x269FBC
+#define I40E_GL_SWR_PRI_JOIN_MAP_0_VALUE 0x10000200
+#define I40E_GL_SWR_PRI_JOIN_MAP_2_VALUE 0x011f0200
+#define I40E_GL_SWR_PM_UP_THR_VALUE      0x03030303
+
+	static const struct {
+		uint32_t addr;
+		uint64_t val;
+	} reg_table[] = {
+		{I40E_GL_SWR_PRI_JOIN_MAP_0, I40E_GL_SWR_PRI_JOIN_MAP_0_VALUE},
+		{I40E_GL_SWR_PRI_JOIN_MAP_2, I40E_GL_SWR_PRI_JOIN_MAP_2_VALUE},
+		{I40E_GL_SWR_PM_UP_THR, I40E_GL_SWR_PM_UP_THR_VALUE},
+	};
+	uint64_t reg;
+	uint32_t i;
+	int ret;
+
+	/* Below fix is for X710 only */
+	if (i40e_is_40G_device(hw->device_id))
+		return;
+
+	for (i = 0; i < RTE_DIM(reg_table); i++) {
+		ret = i40e_debug_read_register(hw, reg_table[i].addr, &reg);
+		if (ret < 0) {
+			PMD_DRV_LOG(ERR, "Failed to read from 0x%x\n",
+						reg_table[i].addr);
+			break;
+		}
+		PMD_DRV_LOG(DEBUG, "Read from 0x%x: 0x%lx", reg_table[i].addr,
+									reg);
+		if (reg == reg_table[i].val)
+			continue;
+
+		ret = i40e_aq_debug_write_register(hw, reg_table[i].addr,
+						reg_table[i].val, NULL);
+		if (ret < 0) {
+			PMD_DRV_LOG(ERR, "Failed to write 0x%x to 0x%x\n",
+				reg_table[i].val, reg_table[i].addr);
+			break;
+		}
+		PMD_DRV_LOG(DEBUG, "Write to 0x%x: 0x%lx", reg_table[i].addr,
+							reg_table[i].val);
+	}
+}
-- 
1.8.1.4

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2015-01-12  0:39 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-15  7:09 [dpdk-dev] [PATCH] i40e: workaround for X710 performance issues Helin Zhang
2014-12-15  7:56 ` [dpdk-dev] [PATCH v2] " Helin Zhang
2014-12-16  2:29   ` Chen, Jing D
2014-12-16  2:43     ` Zhang, Helin
2014-12-16  8:23   ` [dpdk-dev] [PATCH v3] " Helin Zhang
2014-12-16  8:37     ` Thomas Monjalon
2014-12-16 11:07       ` Zhang, Helin
2014-12-16  9:07     ` Chen, Jing D
2014-12-17  0:05       ` Thomas Monjalon
2015-01-08  2:43     ` Wu, Jingjing
2015-01-08  2:49       ` Zhang, Helin
2015-01-09  5:29     ` Wu, Jingjing
2015-01-09 15:48       ` Thomas Monjalon
2015-01-12  0:26         ` Zhang, Helin
2015-01-12  0:39         ` Wu, Jingjing

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).