[dpdk-dev] [PATCH 3/7] vmxnet3: add support for mulit-segment transmit

[Stephen Hemminger <stephen@networkplumber.org>]

From: Stephen Hemminger <shemming@brocade.com>

Change sending loop to support multi-segment mbufs.
The VMXNET3 api has start-of-packet and end-packet flags, so it
is not hard to send multi-segment mbuf's.

Also, update descriptor in 32 bit value rather than toggling
bitfields which is slower and error prone.
Based on code in earlier driver, and the Linux kernel driver.

Add a compiler barrier to make sure that update of earlier descriptor
are completed prior to update of generation bit on start of packet.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bill Hong <bhong@brocade.com>
---
 lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 126 +++++++++++++---------------------
 1 file changed, 48 insertions(+), 78 deletions(-)

diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 8e15784..7cb0b93 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -312,13 +312,9 @@ vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *txq)
 		VMXNET3_ASSERT(txq->cmd_ring.base[tcd->txdIdx].txd.eop == 1);
 #endif
 		mbuf = txq->cmd_ring.buf_info[tcd->txdIdx].m;
-		if (unlikely(mbuf == NULL))
-			rte_panic("EOP desc does not point to a valid mbuf");
-		else
-			rte_pktmbuf_free(mbuf);
-
-
+		rte_pktmbuf_free_seg(mbuf);
 		txq->cmd_ring.buf_info[tcd->txdIdx].m = NULL;
+
 		/* Mark the txd for which tcd was generated as completed */
 		vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
 
@@ -336,13 +332,8 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		  uint16_t nb_pkts)
 {
 	uint16_t nb_tx;
-	Vmxnet3_TxDesc *txd = NULL;
-	vmxnet3_buf_info_t *tbi = NULL;
-	struct vmxnet3_hw *hw;
-	struct rte_mbuf *txm;
 	vmxnet3_tx_queue_t *txq = tx_queue;
-
-	hw = txq->hw;
+	struct vmxnet3_hw *hw = txq->hw;
 
 	if (unlikely(txq->stopped)) {
 		PMD_TX_LOG(DEBUG, "Tx queue is stopped.");
@@ -354,75 +345,60 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 
 	nb_tx = 0;
 	while (nb_tx < nb_pkts) {
+		Vmxnet3_GenericDesc *gdesc;
+		vmxnet3_buf_info_t *tbi;
+		uint32_t first2fill, avail, dw2;
+		struct rte_mbuf *txm = tx_pkts[nb_tx];
+		struct rte_mbuf *m_seg = txm;
+
+		/* Is command ring full? */
+		avail = vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring);
+		if (txm->nb_segs > avail) {
+			++txq->stats.tx_ring_full;
+			break;
+		}
 
-		if (vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring)) {
-			int copy_size = 0;
-
-			txm = tx_pkts[nb_tx];
-			/* Don't support scatter packets yet, free them if met */
-			if (txm->nb_segs != 1) {
-				PMD_TX_LOG(DEBUG, "Don't support scatter packets yet, drop!");
-				rte_pktmbuf_free(tx_pkts[nb_tx]);
-				txq->stats.drop_total++;
-
-				nb_tx++;
-				continue;
-			}
-
-			txd = (Vmxnet3_TxDesc *)(txq->cmd_ring.base + txq->cmd_ring.next2fill);
-			if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
-				struct Vmxnet3_TxDataDesc *tdd;
-
-				tdd = txq->data_ring.base + txq->cmd_ring.next2fill;
-				copy_size = rte_pktmbuf_pkt_len(txm);
-				rte_memcpy(tdd->data, rte_pktmbuf_mtod(txm, char *), copy_size);
-			}
-
-			/* Fill the tx descriptor */
+		/* use the previous gen bit for the SOP desc */
+		dw2 = (txq->cmd_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT;
+		first2fill = txq->cmd_ring.next2fill;
+		do {
+			/* Remember the transmit buffer for cleanup */
 			tbi = txq->cmd_ring.buf_info + txq->cmd_ring.next2fill;
-			tbi->bufPA = RTE_MBUF_DATA_DMA_ADDR(txm);
-			if (copy_size)
-				txd->addr = rte_cpu_to_le_64(txq->data_ring.basePA +
-							txq->cmd_ring.next2fill *
-							sizeof(struct Vmxnet3_TxDataDesc));
-			else
-				txd->addr = tbi->bufPA;
-			txd->len = txm->data_len;
+			tbi->m = m_seg;
 
-			/* Mark the last descriptor as End of Packet. */
-			txd->cq = 1;
-			txd->eop = 1;
+			/* NB: the following assumes that VMXNET3 maximum
+			   transmit buffer size (16K) is greater than
+			   maximum sizeof mbuf segment size. */
+			gdesc = txq->cmd_ring.base + txq->cmd_ring.next2fill;
+			gdesc->txd.addr = RTE_MBUF_DATA_DMA_ADDR(m_seg);
+			gdesc->dword[2] = dw2 | m_seg->data_len;
+			gdesc->dword[3] = 0;
 
-			/* Add VLAN tag if requested */
-			if (txm->ol_flags & PKT_TX_VLAN_PKT) {
-				txd->ti = 1;
-				txd->tci = rte_cpu_to_le_16(txm->vlan_tci);
-			}
+			/* move to the next2fill descriptor */
+			vmxnet3_cmd_ring_adv_next2fill(&txq->cmd_ring);
 
-			/* Record current mbuf for freeing it later in tx complete */
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
-			VMXNET3_ASSERT(txm);
-#endif
-			tbi->m = txm;
+			/* use the right gen for non-SOP desc */
+			dw2 = txq->cmd_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+		} while ( (m_seg = m_seg->next) != NULL);
 
-			/* Set the offloading mode to default */
-			txd->hlen = 0;
-			txd->om = VMXNET3_OM_NONE;
-			txd->msscof = 0;
+		/* Update the EOP descriptor */
+		gdesc->dword[3] |= VMXNET3_TXD_EOP | VMXNET3_TXD_CQ;
 
-			/* finally flip the GEN bit of the SOP desc  */
-			txd->gen = txq->cmd_ring.gen;
-			txq->shared->ctrl.txNumDeferred++;
+		/* Add VLAN tag if present */
+		gdesc = txq->cmd_ring.base + first2fill;
+		if (txm->ol_flags & PKT_TX_VLAN_PKT) {
+			gdesc->txd.ti = 1;
+			gdesc->txd.tci = txm->vlan_tci;
+		}
 
-			/* move to the next2fill descriptor */
-			vmxnet3_cmd_ring_adv_next2fill(&txq->cmd_ring);
-			nb_tx++;
+		/* TODO: Add transmit checksum offload here */
 
-		} else {
-			PMD_TX_LOG(DEBUG, "No free tx cmd desc(s)");
-			txq->stats.drop_total += (nb_pkts - nb_tx);
-			break;
-		}
+		/* flip the GEN bit on the SOP */
+		rte_compiler_barrier();
+		gdesc->dword[2] ^= VMXNET3_TXD_GEN;
+
+		txq->shared->ctrl.txNumDeferred++;
+		nb_tx++;
 	}
 
 	PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", txq->shared->ctrl.txThreshold);
@@ -722,12 +698,6 @@ vmxnet3_dev_tx_queue_setup(struct rte_eth_dev *dev,
 
 	PMD_INIT_FUNC_TRACE();
 
-	if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOMULTSEGS) !=
-	    ETH_TXQ_FLAGS_NOMULTSEGS) {
-		PMD_INIT_LOG(ERR, "TX Multi segment not support yet");
-		return -EINVAL;
-	}
-
 	if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOOFFLOADS) !=
 	    ETH_TXQ_FLAGS_NOOFFLOADS) {
 		PMD_INIT_LOG(ERR, "TX not support offload function yet");
-- 
2.1.3