From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <shemming@brocade.com>
Subject: [dpdk-dev] [PATCH 5/7] vmxnet3: get rid of DEBUG ifdefs
Date: Tue, 16 Dec 2014 21:13:14 -0800 [thread overview]
Message-ID: <1418793196-17953-6-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1418793196-17953-1-git-send-email-stephen@networkplumber.org>
From: Stephen Hemminger <shemming@brocade.com>
By defining macro as a stub it is possible to get rid of #ifdef's
in the actual code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h | 6 ++++--
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 9 +--------
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
index 258fbae..0990f59 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
@@ -35,9 +35,11 @@
#define _VMXNET3_ETHDEV_H_
#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
-#define VMXNET3_ASSERT(x) do { \
- if (!(x)) rte_panic("VMXNET3: x"); \
+#define VMXNET3_ASSERT(x) do { \
+ if (unlikely(!(x))) rte_panic("VMXNET3: %s\n", #x); \
} while(0)
+#else
+#define VMXNET3_ASSERT(x) do { (void)(x); } while (0)
#endif
#define VMXNET3_MAX_MAC_ADDRS 1
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 7cb0b93..bd47c6c 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -308,9 +308,7 @@ vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *txq)
while (tcd->gen == comp_ring->gen) {
/* Release cmd_ring descriptor and free mbuf */
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
VMXNET3_ASSERT(txq->cmd_ring.base[tcd->txdIdx].txd.eop == 1);
-#endif
mbuf = txq->cmd_ring.buf_info[tcd->txdIdx].m;
rte_pktmbuf_free_seg(mbuf);
txq->cmd_ring.buf_info[tcd->txdIdx].m = NULL;
@@ -539,16 +537,13 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
PMD_RX_LOG(DEBUG, "rxd idx: %d ring idx: %d.", idx, ring_idx);
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
VMXNET3_ASSERT(rcd->len <= rxd->len);
VMXNET3_ASSERT(rbi->m);
-#endif
+
if (unlikely(rcd->len == 0)) {
PMD_RX_LOG(DEBUG, "Rx buf was skipped. rxring[%d][%d]\n)",
ring_idx, idx);
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
VMXNET3_ASSERT(rcd->sop && rcd->eop);
-#endif
rte_pktmbuf_free_seg(rbi->m);
goto rcd_done;
}
@@ -561,9 +556,7 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
rte_pktmbuf_free_seg(rbi->m);
goto rcd_done;
}
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
VMXNET3_ASSERT(rxd->btype == VMXNET3_RXD_BTYPE_HEAD);
-#endif
/* Get the packet buffer pointer from buf_info */
rxm = rbi->m;
--
2.1.3
next prev parent reply other threads:[~2014-12-17 5:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-17 5:13 [dpdk-dev] [PATCH 0/7] vmxnet3: driver enhancements Stephen Hemminger
2014-12-17 5:13 ` [dpdk-dev] [PATCH 1/7] vmxnet3: add support for VLAN filtering Stephen Hemminger
2015-02-12 18:40 ` Yong Wang
2014-12-17 5:13 ` [dpdk-dev] [PATCH 2/7] vmxnet3: remove mtu check Stephen Hemminger
2015-02-11 0:54 ` Yong Wang
2014-12-17 5:13 ` [dpdk-dev] [PATCH 3/7] vmxnet3: add support for mulit-segment transmit Stephen Hemminger
2015-02-11 21:15 ` Yong Wang
2014-12-17 5:13 ` [dpdk-dev] [PATCH 4/7] vmxnet3: fix link state handling Stephen Hemminger
2015-02-11 2:24 ` Yong Wang
2014-12-17 5:13 ` Stephen Hemminger [this message]
2015-02-11 0:54 ` [dpdk-dev] [PATCH 5/7] vmxnet3: get rid of DEBUG ifdefs Yong Wang
2015-02-11 2:18 ` Stephen Hemminger
2014-12-17 5:13 ` [dpdk-dev] [PATCH 6/7] vmxnet3: support RSS and refactor offload Stephen Hemminger
2015-02-11 1:28 ` Yong Wang
2014-12-17 5:13 ` [dpdk-dev] [PATCH 7/7] vmxnet3: support jumbo frames Stephen Hemminger
2015-01-15 11:02 ` [dpdk-dev] [PATCH 0/7] vmxnet3: driver enhancements Thomas Monjalon
[not found] ` <20150121164925.10d1751c@urahara>
2015-01-22 9:42 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418793196-17953-6-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=shemming@brocade.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).