From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe
Date: Mon, 12 Jan 2015 16:50:42 +0100 [thread overview]
Message-ID: <1421077843-8492-2-git-send-email-michalx.k.jastrzebski@intel.com> (raw)
In-Reply-To: <1421077843-8492-1-git-send-email-michalx.k.jastrzebski@intel.com>
From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch add support for DCB in SRIOV mode. When no PFC
is enabled this feature might be used as multiple queues
(up to 8 or 4) for VF.
It incorporate following modifications:
- Allow zero rx/tx queues to be passed to rte_eth_dev_configure().
Rationale:
in SRIOV mode PF use first free VF to RX/TX. If VF count
is 16 or 32 all recources are assigned to VFs so PF can
be used only for configuration.
- split nb_q_per_pool to nb_rx_q_per_pool and nb_tx_q_per_pool
Rationale:
rx and tx number of queue might be different if RX and TX are
configured in different mode. This allow to inform VF about
proper number of queues.
- extern mailbox API for DCB mode
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
---
lib/librte_ether/rte_ethdev.c | 84 +++++++++++++++++++++---------
lib/librte_ether/rte_ethdev.h | 5 +-
lib/librte_pmd_e1000/igb_pf.c | 3 +-
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 10 ++--
lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 1 +
lib/librte_pmd_ixgbe/ixgbe_pf.c | 98 ++++++++++++++++++++++++++++++-----
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 7 ++-
7 files changed, 159 insertions(+), 49 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 95f2ceb..4c1a494 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -333,7 +333,7 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
sizeof(dev->data->rx_queues[0]) * nb_queues,
RTE_CACHE_LINE_SIZE);
- if (dev->data->rx_queues == NULL) {
+ if (dev->data->rx_queues == NULL && nb_queues > 0) {
dev->data->nb_rx_queues = 0;
return -(ENOMEM);
}
@@ -475,7 +475,7 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
sizeof(dev->data->tx_queues[0]) * nb_queues,
RTE_CACHE_LINE_SIZE);
- if (dev->data->tx_queues == NULL) {
+ if (dev->data->tx_queues == NULL && nb_queues > 0) {
dev->data->nb_tx_queues = 0;
return -(ENOMEM);
}
@@ -507,6 +507,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ struct rte_eth_dev_info dev_info;
if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
/* check multi-queue mode */
@@ -524,11 +525,33 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
return (-EINVAL);
}
+ if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) &&
+ (dev_conf->txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)) {
+ enum rte_eth_nb_pools rx_pools =
+ dev_conf->rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
+ enum rte_eth_nb_pools tx_pools =
+ dev_conf->tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
+
+ if (rx_pools != tx_pools) {
+ /* Only equal number of pools is supported when
+ * DCB+VMDq in SRIOV */
+ PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
+ " SRIOV active, DCB+VMDQ mode, "
+ "number of rx and tx pools is not eqaul\n",
+ port_id);
+ return (-EINVAL);
+ }
+ }
+
+ uint16_t nb_rx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool;
+ uint16_t nb_tx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
+
switch (dev_conf->rxmode.mq_mode) {
- case ETH_MQ_RX_VMDQ_RSS:
case ETH_MQ_RX_VMDQ_DCB:
+ break;
+ case ETH_MQ_RX_VMDQ_RSS:
case ETH_MQ_RX_VMDQ_DCB_RSS:
- /* DCB/RSS VMDQ in SRIOV mode, not implement yet */
+ /* RSS, DCB+RSS VMDQ in SRIOV mode, not implement yet */
PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
" SRIOV active, "
"unsupported VMDQ mq_mode rx %u\n",
@@ -537,37 +560,32 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
/* if nothing mq mode configure, use default scheme */
dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
- if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
+ if (nb_rx_q_per_pool > 1)
+ nb_rx_q_per_pool = 1;
break;
}
switch (dev_conf->txmode.mq_mode) {
- case ETH_MQ_TX_VMDQ_DCB:
- /* DCB VMDQ in SRIOV mode, not implement yet */
- PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
- " SRIOV active, "
- "unsupported VMDQ mq_mode tx %u\n",
- port_id, dev_conf->txmode.mq_mode);
- return (-EINVAL);
+ case ETH_MQ_TX_VMDQ_DCB: /* DCB VMDQ in SRIOV mode*/
+ break;
default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
/* if nothing mq mode configure, use default scheme */
dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
- if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
+ if (nb_tx_q_per_pool > 1)
+ nb_tx_q_per_pool = 1;
break;
}
/* check valid queue number */
- if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
- (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
+ if (nb_rx_q > nb_rx_q_per_pool || nb_tx_q > nb_tx_q_per_pool) {
PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV active, "
- "queue number must less equal to %d\n",
- port_id, RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
+ "rx/tx queue number must less equal to %d/%d\n",
+ port_id, RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool,
+ RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool);
return (-EINVAL);
}
} else {
- /* For vmdb+dcb mode check our configuration before we go further */
+ /* For vmdq+dcb mode check our configuration before we go further */
if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) {
const struct rte_eth_vmdq_dcb_conf *conf;
@@ -606,11 +624,20 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
}
}
+ /* For DCB we need to obtain maximum number of queues dinamically,
+ * as this depends on max VF exported in PF */
+ if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
+ (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+ (*dev->dev_ops->dev_infos_get)(dev, &dev_info);
+ }
+
/* For DCB mode check our configuration before we go further */
if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
const struct rte_eth_dcb_rx_conf *conf;
- if (nb_rx_q != ETH_DCB_NUM_QUEUES) {
+ if (nb_rx_q != dev_info.max_rx_queues) {
PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_rx_q "
"!= %d\n",
port_id, ETH_DCB_NUM_QUEUES);
@@ -630,7 +657,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
const struct rte_eth_dcb_tx_conf *conf;
- if (nb_tx_q != ETH_DCB_NUM_QUEUES) {
+ if (nb_tx_q != dev_info.max_tx_queues) {
PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_tx_q "
"!= %d\n",
port_id, ETH_DCB_NUM_QUEUES);
@@ -690,7 +717,10 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
}
if (nb_rx_q == 0) {
PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_q == 0\n", port_id);
- return (-EINVAL);
+ /* In SRIOV there can be no free resource for PF. So permit use only
+ * for configuration. */
+ if (RTE_ETH_DEV_SRIOV(dev).active == 0)
+ return (-EINVAL);
}
if (nb_tx_q > dev_info.max_tx_queues) {
@@ -698,9 +728,13 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
port_id, nb_tx_q, dev_info.max_tx_queues);
return (-EINVAL);
}
+
if (nb_tx_q == 0) {
PMD_DEBUG_TRACE("ethdev port_id=%d nb_tx_q == 0\n", port_id);
- return (-EINVAL);
+ /* In SRIOV there can be no free resource for PF. So permit use only
+ * for configuration. */
+ if (RTE_ETH_DEV_SRIOV(dev).active == 0)
+ return (-EINVAL);
}
/* Copy the dev_conf parameter into the dev structure */
@@ -750,7 +784,7 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
ETHER_MAX_LEN;
}
- /* multipe queue mode checking */
+ /* multiple queue mode checking */
diag = rte_eth_dev_check_mq_mode(port_id, nb_rx_q, nb_tx_q, dev_conf);
if (diag != 0) {
PMD_DEBUG_TRACE("port%d rte_eth_dev_check_mq_mode = %d\n",
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index ce0528f..04fda83 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -299,7 +299,7 @@ enum rte_eth_rx_mq_mode {
enum rte_eth_tx_mq_mode {
ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
- ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
+ ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
};
@@ -1569,7 +1569,8 @@ struct rte_eth_dev {
struct rte_eth_dev_sriov {
uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
- uint8_t nb_q_per_pool; /**< rx queue number per pool */
+ uint8_t nb_rx_q_per_pool; /**< rx queue number per pool */
+ uint8_t nb_tx_q_per_pool; /**< tx queue number per pool */
uint16_t def_vmdq_idx; /**< Default pool num used for PF */
uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
};
diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
index bc3816a..9d2f858 100644
--- a/lib/librte_pmd_e1000/igb_pf.c
+++ b/lib/librte_pmd_e1000/igb_pf.c
@@ -115,7 +115,8 @@ void igb_pf_host_init(struct rte_eth_dev *eth_dev)
rte_panic("Cannot allocate memory for private VF data\n");
RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_8_POOLS;
- RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num * nb_queue);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 3fc3738..347f03c 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -3555,14 +3555,14 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ixgbe_vf_info *vfinfo =
*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
- uint8_t nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
+ uint8_t nb_tx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
uint32_t queue_stride =
IXGBE_MAX_RX_QUEUE_NUM / RTE_ETH_DEV_SRIOV(dev).active;
uint32_t queue_idx = vf * queue_stride, idx = 0, vf_idx;
- uint32_t queue_end = queue_idx + nb_q_per_pool - 1;
+ uint32_t tx_queue_end = queue_idx + nb_tx_q_per_pool - 1;
uint16_t total_rate = 0;
- if (queue_end >= hw->mac.max_tx_queues)
+ if (tx_queue_end >= hw->mac.max_tx_queues)
return -EINVAL;
if (vfinfo != NULL) {
@@ -3577,7 +3577,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
return -EINVAL;
/* Store tx_rate for this vf. */
- for (idx = 0; idx < nb_q_per_pool; idx++) {
+ for (idx = 0; idx < nb_tx_q_per_pool; idx++) {
if (((uint64_t)0x1 << idx) & q_msk) {
if (vfinfo[vf].tx_rate[idx] != tx_rate)
vfinfo[vf].tx_rate[idx] = tx_rate;
@@ -3595,7 +3595,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
}
/* Set RTTBCNRC of each queue/pool for vf X */
- for (; queue_idx <= queue_end; queue_idx++) {
+ for (; queue_idx <= tx_queue_end; queue_idx++) {
if (0x1 & q_msk)
ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate);
q_msk = q_msk >> 1;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
index ca99170..ebf16e9 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
@@ -159,6 +159,7 @@ struct ixgbe_vf_info {
uint16_t tx_rate[IXGBE_MAX_QUEUE_NUM_PER_VF];
uint16_t vlan_count;
uint8_t spoofchk_enabled;
+ unsigned int vf_api;
};
/*
diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
index 51da1fd..4d30bcf 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
@@ -127,7 +127,8 @@ void ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_16_POOLS;
}
- RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num * nb_queue);
@@ -189,7 +190,7 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
hw->mac.ops.set_vmdq(hw, 0, RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx);
/*
- * SW msut set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
+ * SW must set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
*/
gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
gcr_ext &= ~IXGBE_GCR_EXT_VT_MODE_MASK;
@@ -214,19 +215,19 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
}
IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
- IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
- /*
+ /*
* enable vlan filtering and allow all vlan tags through
*/
- vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
+ vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
- /* VFTA - enable all vlan filters */
- for (i = 0; i < IXGBE_MAX_VFTA; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
- }
+ /* VFTA - enable all vlan filters */
+ for (i = 0; i < IXGBE_MAX_VFTA; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
+ }
/* Enable MAC Anti-Spoofing */
hw->mac.ops.set_mac_anti_spoofing(hw, FALSE, vf_num);
@@ -369,6 +370,73 @@ ixgbe_vf_reset(struct rte_eth_dev *dev, uint16_t vf, uint32_t *msgbuf)
}
static int
+ixgbe_negotiate_vf_api(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
+{
+ struct ixgbe_vf_info *vfinfo =
+ *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
+ int api = msgbuf[1];
+
+ switch (api) {
+ case ixgbe_mbox_api_10:
+ case ixgbe_mbox_api_11:
+ vfinfo[vf].vf_api = api;
+ return 0;
+ default:
+ break;
+ }
+
+ RTE_LOG(DEBUG, PMD, "VF %d requested invalid api version %u\n", vf, api);
+ return -1;
+}
+
+static int
+ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
+{
+ struct ixgbe_vf_info *vfinfo =
+ *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
+ struct ixgbe_dcb_config *dcb_cfg =
+ IXGBE_DEV_PRIVATE_TO_DCB_CFG(dev->data->dev_private);
+
+ uint8_t num_tcs = dcb_cfg->num_tcs.pg_tcs;
+
+ /* verify the PF is supporting the correct APIs */
+ switch (vfinfo[vf].vf_api) {
+ case ixgbe_mbox_api_10:
+ case ixgbe_mbox_api_11:
+ break;
+ default:
+ return -1;
+ }
+
+ if (RTE_ETH_DEV_SRIOV(dev).active) {
+ if (dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
+ msgbuf[IXGBE_VF_TX_QUEUES] = num_tcs;
+ else
+ msgbuf[IXGBE_VF_TX_QUEUES] = 1;
+
+ if (dev->data->dev_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
+ msgbuf[IXGBE_VF_RX_QUEUES] = num_tcs;
+ else
+ msgbuf[IXGBE_VF_RX_QUEUES] = 1;
+ } else {
+ /* only allow 1 Tx queue for bandwidth limiting */
+ msgbuf[IXGBE_VF_TX_QUEUES] = 1;
+ msgbuf[IXGBE_VF_RX_QUEUES] = 1;
+ }
+
+ /* notify VF of need for VLAN tag stripping, and correct queue */
+ if (num_tcs)
+ msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
+ else
+ msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
+
+ /* notify VF of default queue */
+ msgbuf[IXGBE_VF_DEF_QUEUE] = 0;
+
+ return 0;
+}
+
+static int
ixgbe_vf_set_mac_addr(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -512,6 +580,12 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
case IXGBE_VF_SET_VLAN:
retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
break;
+ case IXGBE_VF_API_NEGOTIATE:
+ retval = ixgbe_negotiate_vf_api(dev, vf, msgbuf);
+ break;
+ case IXGBE_VF_GET_QUEUES:
+ retval = ixgbe_get_vf_queues(dev, vf, msgbuf);
+ break;
default:
PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x", (unsigned)msgbuf[0]);
retval = IXGBE_ERR_MBX;
@@ -526,7 +600,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
- ixgbe_write_mbx(hw, msgbuf, 1, vf);
+ ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
return retval;
}
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index e10d6a2..49b44fe 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -3166,10 +3166,9 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
/* check support mq_mode for DCB */
if ((dev_conf->rxmode.mq_mode != ETH_MQ_RX_VMDQ_DCB) &&
- (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB))
- return;
-
- if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
+ (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB) &&
+ (dev_conf->txmode.mq_mode != ETH_MQ_TX_VMDQ_DCB) &&
+ (dev_conf->txmode.mq_mode != ETH_MQ_TX_DCB))
return;
/** Configure DCB hardware **/
--
1.7.9.5
next prev parent reply other threads:[~2015-01-12 15:52 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
2015-01-12 15:50 ` Michal Jastrzebski [this message]
2015-01-13 10:14 ` [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe Vlad Zolotarov
2015-01-13 11:00 ` Wodkowski, PawelX
2015-01-14 1:00 ` Ouyang, Changchun
2015-01-12 15:50 ` [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode Michal Jastrzebski
2015-01-13 10:15 ` Vlad Zolotarov
2015-01-13 11:08 ` Wodkowski, PawelX
2015-01-13 9:50 ` [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Wodkowski, PawelX
2015-01-13 10:11 ` Vlad Zolotarov
2015-01-19 13:02 ` [dpdk-dev] [PATCH v2 0/4] " Pawel Wodkowski
2015-01-19 13:02 ` [dpdk-dev] [PATCH v2 1/4] ethdev: Allow zero rx/tx queues in SRIOV mode Pawel Wodkowski
2015-01-19 13:02 ` [dpdk-dev] [PATCH v2 2/4] ethdev: prevent changing of nb_q_per_pool in rte_eth_dev_check_mq_mode() Pawel Wodkowski
2015-01-20 1:32 ` Ouyang, Changchun
2015-01-20 9:09 ` Wodkowski, PawelX
2015-01-19 13:02 ` [dpdk-dev] [PATCH v2 3/4] pmd: add support for DCB in SRIOV mode for ixgbe driver Pawel Wodkowski
2015-01-20 1:56 ` Ouyang, Changchun
2015-01-20 6:52 ` Thomas Monjalon
2015-01-19 13:02 ` [dpdk-dev] [PATCH v2 4/4] testpmd: fix dcb in vt mode Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 0/7] Enable DCB in SRIOV mode for ixgbe driver Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 1/7] ethdev: Allow zero rx/tx queues in SRIOV mode Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 2/7] pmd igb: fix VMDQ mode checking Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 3/7] pmd: igb/ixgbe split nb_q_per_pool to rx and tx nb_q_per_pool Pawel Wodkowski
2015-02-25 3:24 ` Ouyang, Changchun
2015-02-25 7:47 ` Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 4/7] move rte_eth_dev_check_mq_mode() logic to driver Pawel Wodkowski
2015-02-25 6:14 ` Ouyang, Changchun
2015-02-25 9:57 ` Pawel Wodkowski
2015-06-09 4:06 ` Wu, Jingjing
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 5/7] pmd ixgbe: enable DCB in SRIOV Pawel Wodkowski
2015-02-25 3:36 ` Ouyang, Changchun
2015-02-25 11:29 ` Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 6/7] tespmd: fix DCB in SRIOV mode support Pawel Wodkowski
2015-02-19 15:54 ` [dpdk-dev] [PATCH v4 7/7] pmd ixgbe: fix vlan setting in in PF Pawel Wodkowski
2015-06-08 3:00 ` [dpdk-dev] [PATCH v4 0/7] Enable DCB in SRIOV mode for ixgbe driver Zhang, Helin
-- strict thread matches above, loose matches on Subject: below --
2015-01-12 14:43 [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe Michal Jastrzebski
2015-01-12 15:46 ` Jastrzebski, MichalX K
2015-01-13 10:02 ` Vlad Zolotarov
2015-01-13 10:08 ` Vlad Zolotarov
2015-01-14 0:51 ` Ouyang, Changchun
2015-01-14 9:46 ` Wodkowski, PawelX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421077843-8492-2-git-send-email-michalx.k.jastrzebski@intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).