From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH RFC 01/13] mk: Remove combined library and related options
Date: Mon, 12 Jan 2015 16:33:54 +0000 [thread overview]
Message-ID: <1421080446-19249-2-git-send-email-sergio.gonzalez.monroy@intel.com> (raw)
In-Reply-To: <1421080446-19249-1-git-send-email-sergio.gonzalez.monroy@intel.com>
Remove CONFIG_RTE_BUILD_COMBINE_LIBS and CONFIG_RTE_LIBNAME.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
config/common_bsdapp | 6 --
config/common_linuxapp | 6 --
config/defconfig_ppc_64-power8-linuxapp-gcc | 2 -
lib/Makefile | 1 -
mk/rte.app.mk | 12 ----
mk/rte.lib.mk | 34 ----------
mk/rte.sdkbuild.mk | 3 -
mk/rte.sharelib.mk | 101 ----------------------------
mk/rte.vars.mk | 9 ---
9 files changed, 174 deletions(-)
delete mode 100644 mk/rte.sharelib.mk
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 9177db1..812a6ca 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -79,12 +79,6 @@ CONFIG_RTE_FORCE_INTRINSICS=n
CONFIG_RTE_BUILD_SHARED_LIB=n
#
-# Combine to one single library
-#
-CONFIG_RTE_BUILD_COMBINE_LIBS=n
-CONFIG_RTE_LIBNAME=intel_dpdk
-
-#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 2f9643b..e35ad2b 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -79,12 +79,6 @@ CONFIG_RTE_FORCE_INTRINSICS=n
CONFIG_RTE_BUILD_SHARED_LIB=n
#
-# Combine to one single library
-#
-CONFIG_RTE_BUILD_COMBINE_LIBS=n
-CONFIG_RTE_LIBNAME="intel_dpdk"
-
-#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
index d97a885..f1af518 100644
--- a/config/defconfig_ppc_64-power8-linuxapp-gcc
+++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
@@ -39,8 +39,6 @@ CONFIG_RTE_ARCH_64=y
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
-CONFIG_RTE_LIBNAME="powerpc_dpdk"
-
# Note: Power doesn't have this support
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
diff --git a/lib/Makefile b/lib/Makefile
index 0ffc982..bafc9ae 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -71,5 +71,4 @@ DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
DIRS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += librte_ivshmem
endif
-include $(RTE_SDK)/mk/rte.sharelib.mk
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index e1a0dbf..becdac5 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -61,8 +61,6 @@ ifeq ($(NO_AUTOLIBS),)
LDLIBS += --whole-archive
-ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
-
ifeq ($(CONFIG_RTE_LIBRTE_DISTRIBUTOR),y)
LDLIBS += -lrte_distributor
endif
@@ -121,16 +119,12 @@ LDLIBS += -lm
LDLIBS += -lrt
endif
-endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
-
ifeq ($(CONFIG_RTE_LIBRTE_PMD_PCAP),y)
LDLIBS += -lpcap
endif
LDLIBS += --start-group
-ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
-
ifeq ($(CONFIG_RTE_LIBRTE_KVARGS),y)
LDLIBS += -lrte_kvargs
endif
@@ -226,8 +220,6 @@ endif
endif # plugins
-endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
-
LDLIBS += $(EXECENV_LDLIBS)
LDLIBS += --end-group
@@ -251,10 +243,6 @@ build: _postbuild
exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
-ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),y)
-LDLIBS += -l$(RTE_LIBNAME)
-endif
-
ifeq ($(LINK_USING_CC),1)
override EXTRA_LDFLAGS := $(call linkerprefix,$(EXTRA_LDFLAGS))
O_TO_EXE = $(CC) $(CFLAGS) $(LDFLAGS_$(@)) \
diff --git a/mk/rte.lib.mk b/mk/rte.lib.mk
index 81bf8e1..7c99fd1 100644
--- a/mk/rte.lib.mk
+++ b/mk/rte.lib.mk
@@ -84,24 +84,6 @@ O_TO_S_DO = @set -e; \
$(O_TO_S) && \
echo $(O_TO_S_CMD) > $(call exe2cmd,$(@))
-ifeq ($(RTE_BUILD_SHARED_LIB),n)
-O_TO_C = $(AR) crus $(LIB_ONE) $(OBJS-y)
-O_TO_C_STR = $(subst ','\'',$(O_TO_C)) #'# fix syntax highlight
-O_TO_C_DISP = $(if $(V),"$(O_TO_C_STR)"," AR_C $(@)")
-O_TO_C_DO = @set -e; \
- $(lib_dir) \
- $(copy_obj)
-else
-O_TO_C = $(LD) -shared $(OBJS-y) -o $(LIB_ONE)
-O_TO_C_STR = $(subst ','\'',$(O_TO_C)) #'# fix syntax highlight
-O_TO_C_DISP = $(if $(V),"$(O_TO_C_STR)"," LD_C $(@)")
-O_TO_C_DO = @set -e; \
- $(lib_dir) \
- $(copy_obj)
-endif
-
-copy_obj = cp -f $(OBJS-y) $(RTE_OUTPUT)/build/lib;
-lib_dir = [ -d $(RTE_OUTPUT)/lib ] || mkdir -p $(RTE_OUTPUT)/lib;
-include .$(LIB).cmd
#
@@ -122,14 +104,6 @@ $(LIB): $(OBJS-y) $(DEP_$(LIB)) FORCE
$(depfile_missing),\
$(depfile_newer)),\
$(O_TO_S_DO))
-ifeq ($(RTE_BUILD_COMBINE_LIBS),y)
- $(if $(or \
- $(file_missing),\
- $(call cmdline_changed,$(O_TO_C_STR)),\
- $(depfile_missing),\
- $(depfile_newer)),\
- $(O_TO_C_DO))
-endif
else
$(LIB): $(OBJS-y) $(DEP_$(LIB)) FORCE
@[ -d $(dir $@) ] || mkdir -p $(dir $@)
@@ -145,14 +119,6 @@ $(LIB): $(OBJS-y) $(DEP_$(LIB)) FORCE
$(depfile_missing),\
$(depfile_newer)),\
$(O_TO_A_DO))
-ifeq ($(RTE_BUILD_COMBINE_LIBS),y)
- $(if $(or \
- $(file_missing),\
- $(call cmdline_changed,$(O_TO_C_STR)),\
- $(depfile_missing),\
- $(depfile_newer)),\
- $(O_TO_C_DO))
-endif
endif
#
diff --git a/mk/rte.sdkbuild.mk b/mk/rte.sdkbuild.mk
index 3154457..2b24e74 100644
--- a/mk/rte.sdkbuild.mk
+++ b/mk/rte.sdkbuild.mk
@@ -93,9 +93,6 @@ $(ROOTDIRS-y):
@[ -d $(BUILDDIR)/$@ ] || mkdir -p $(BUILDDIR)/$@
@echo "== Build $@"
$(Q)$(MAKE) S=$@ -f $(RTE_SRCDIR)/$@/Makefile -C $(BUILDDIR)/$@ all
- @if [ $@ = lib -a $(RTE_BUILD_COMBINE_LIBS) = y ]; then \
- $(MAKE) -f $(RTE_SDK)/lib/Makefile sharelib; \
- fi
%_clean:
@echo "== Clean $*"
diff --git a/mk/rte.sharelib.mk b/mk/rte.sharelib.mk
deleted file mode 100644
index de53558..0000000
--- a/mk/rte.sharelib.mk
+++ /dev/null
@@ -1,101 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-include $(RTE_SDK)/mk/internal/rte.build-pre.mk
-
-# VPATH contains at least SRCDIR
-VPATH += $(SRCDIR)
-
-ifeq ($(RTE_BUILD_COMBINE_LIBS),y)
-ifeq ($(RTE_BUILD_SHARED_LIB),y)
-LIB_ONE := lib$(RTE_LIBNAME).so
-else
-LIB_ONE := lib$(RTE_LIBNAME).a
-endif
-endif
-
-.PHONY:sharelib
-sharelib: $(LIB_ONE) FORCE
-
-OBJS = $(wildcard $(RTE_OUTPUT)/build/lib/*.o)
-
-ifeq ($(LINK_USING_CC),1)
-# Override the definition of LD here, since we're linking with CC
-LD := $(CC) $(CPU_CFLAGS)
-O_TO_S = $(LD) $(call linkerprefix,$(CPU_LDFLAGS)) \
- -shared $(OBJS) -o $(RTE_OUTPUT)/lib/$(LIB_ONE)
-else
-O_TO_S = $(LD) $(CPU_LDFLAGS) \
- -shared $(OBJS) -o $(RTE_OUTPUT)/lib/$(LIB_ONE)
-endif
-
-O_TO_S_STR = $(subst ','\'',$(O_TO_S)) #'# fix syntax highlight
-O_TO_S_DISP = $(if $(V),"$(O_TO_S_STR)"," LD $(@)")
-O_TO_S_CMD = "cmd_$@ = $(O_TO_S_STR)"
-O_TO_S_DO = @set -e; \
- echo $(O_TO_S_DISP); \
- $(O_TO_S)
-
-O_TO_A = $(AR) crus $(RTE_OUTPUT)/lib/$(LIB_ONE) $(OBJS)
-O_TO_A_STR = $(subst ','\'',$(O_TO_A)) #'# fix syntax highlight
-O_TO_A_DISP = $(if $(V),"$(O_TO_A_STR)"," LD $(@)")
-O_TO_A_CMD = "cmd_$@ = $(O_TO_A_STR)"
-O_TO_A_DO = @set -e; \
- echo $(O_TO_A_DISP); \
- $(O_TO_A)
-#
-# Archive objects to share library
-#
-
-ifeq ($(RTE_BUILD_COMBINE_LIBS),y)
-ifeq ($(RTE_BUILD_SHARED_LIB),y)
-$(LIB_ONE): FORCE
- @[ -d $(dir $@) ] || mkdir -p $(dir $@)
- $(O_TO_S_DO)
-else
-$(LIB_ONE): FORCE
- @[ -d $(dir $@) ] || mkdir -p $(dir $@)
- $(O_TO_A_DO)
-endif
-endif
-
-#
-# Clean all generated files
-#
-.PHONY: clean
-clean: _postclean
-
-.PHONY: doclean
-doclean:
- $(Q)rm -rf $(LIB_ONE)
-
-.PHONY: FORCE
-FORCE:
diff --git a/mk/rte.vars.mk b/mk/rte.vars.mk
index d5b36be..316c35b 100644
--- a/mk/rte.vars.mk
+++ b/mk/rte.vars.mk
@@ -67,15 +67,6 @@ ifneq ($(BUILDING_RTE_SDK),)
ifeq ($(RTE_BUILD_SHARED_LIB),)
RTE_BUILD_SHARED_LIB := n
endif
- RTE_BUILD_COMBINE_LIBS := $(CONFIG_RTE_BUILD_COMBINE_LIBS:"%"=%)
- ifeq ($(RTE_BUILD_COMBINE_LIBS),)
- RTE_BUILD_COMBINE_LIBS := n
- endif
-endif
-
-RTE_LIBNAME := $(CONFIG_RTE_LIBNAME:"%"=%)
-ifeq ($(RTE_LIBNAME),)
-RTE_LIBNAME := intel_dpdk
endif
# RTE_TARGET is deducted from config when we are building the SDK.
--
1.9.3
next prev parent reply other threads:[~2015-01-12 16:34 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 16:33 [dpdk-dev] [PATCH RFC 00/13] Update build system Sergio Gonzalez Monroy
2015-01-12 16:33 ` Sergio Gonzalez Monroy [this message]
2015-01-12 16:33 ` [dpdk-dev] [PATCH RFC 02/13] lib/core: create new core dir and makefiles Sergio Gonzalez Monroy
2015-01-12 16:33 ` [dpdk-dev] [PATCH RFC 03/13] core: move librte_eal to core subdir Sergio Gonzalez Monroy
2015-01-12 16:33 ` [dpdk-dev] [PATCH RFC 04/13] core: move librte_malloc " Sergio Gonzalez Monroy
2015-01-12 16:33 ` [dpdk-dev] [PATCH RFC 05/13] core: move librte_mempool " Sergio Gonzalez Monroy
2015-01-12 16:33 ` [dpdk-dev] [PATCH RFC 06/13] core: move librte_mbuf " Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 07/13] core: move librte_ring " Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 08/13] Update path of core libraries Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 09/13] mk: new corelib makefile Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 10/13] lib: Set LDLIBS for each library Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 11/13] mk: Use LDLIBS when linking shared libraries Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 12/13] mk: update apps build Sergio Gonzalez Monroy
2015-01-12 16:34 ` [dpdk-dev] [PATCH RFC 13/13] mk: add -lpthread to linuxapp EXECENV_LDLIBS Sergio Gonzalez Monroy
2015-01-12 16:51 ` [dpdk-dev] [PATCH RFC 00/13] Update build system Thomas Monjalon
2015-01-12 17:21 ` Gonzalez Monroy, Sergio
2015-01-12 18:16 ` Neil Horman
2015-01-22 10:03 ` Gonzalez Monroy, Sergio
2015-01-22 10:38 ` Thomas Monjalon
2015-01-22 11:01 ` Gonzalez Monroy, Sergio
2015-01-13 12:26 ` Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421080446-19249-2-git-send-email-sergio.gonzalez.monroy@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).