From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC 07/17] enic: support of unified packet type
Date: Mon, 19 Jan 2015 11:23:13 +0800 [thread overview]
Message-ID: <1421637803-17034-8-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1421637803-17034-1-git-send-email-helin.zhang@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
ol_flags are replaced by unified packet type.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
lib/librte_pmd_enic/enic_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/lib/librte_pmd_enic/enic_main.c b/lib/librte_pmd_enic/enic_main.c
index 8ab8e44..aa88e5b 100644
--- a/lib/librte_pmd_enic/enic_main.c
+++ b/lib/librte_pmd_enic/enic_main.c
@@ -424,7 +424,7 @@ static int enic_rq_indicate_buf(struct vnic_rq *rq,
rx_pkt->pkt_len = bytes_written;
if (ipv4) {
- rx_pkt->ol_flags |= PKT_RX_IPV4_HDR;
+ rx_pkt->packet_type = RTE_PTYPE_L3_IPV4;
if (!csum_not_calc) {
if (unlikely(!ipv4_csum_ok))
rx_pkt->ol_flags |= PKT_RX_IP_CKSUM_BAD;
@@ -433,7 +433,7 @@ static int enic_rq_indicate_buf(struct vnic_rq *rq,
rx_pkt->ol_flags |= PKT_RX_L4_CKSUM_BAD;
}
} else if (ipv6)
- rx_pkt->ol_flags |= PKT_RX_IPV6_HDR;
+ rx_pkt->packet_type = RTE_PTYPE_L3_IPV6;
} else {
/* Header split */
if (sop && !eop) {
@@ -446,7 +446,7 @@ static int enic_rq_indicate_buf(struct vnic_rq *rq,
*rx_pkt_bucket = rx_pkt;
rx_pkt->pkt_len = bytes_written;
if (ipv4) {
- rx_pkt->ol_flags |= PKT_RX_IPV4_HDR;
+ rx_pkt->packet_type = RTE_PTYPE_L3_IPV4;
if (!csum_not_calc) {
if (unlikely(!ipv4_csum_ok))
rx_pkt->ol_flags |=
@@ -458,13 +458,14 @@ static int enic_rq_indicate_buf(struct vnic_rq *rq,
PKT_RX_L4_CKSUM_BAD;
}
} else if (ipv6)
- rx_pkt->ol_flags |= PKT_RX_IPV6_HDR;
+ rx_pkt->packet_type = RTE_PTYPE_L3_IPV6;
} else {
/* Payload */
hdr_rx_pkt = *rx_pkt_bucket;
hdr_rx_pkt->pkt_len += bytes_written;
if (ipv4) {
- hdr_rx_pkt->ol_flags |= PKT_RX_IPV4_HDR;
+ hdr_rx_pkt->packet_type =
+ RTE_PTYPE_L3_IPV4;
if (!csum_not_calc) {
if (unlikely(!ipv4_csum_ok))
hdr_rx_pkt->ol_flags |=
@@ -476,7 +477,8 @@ static int enic_rq_indicate_buf(struct vnic_rq *rq,
PKT_RX_L4_CKSUM_BAD;
}
} else if (ipv6)
- hdr_rx_pkt->ol_flags |= PKT_RX_IPV6_HDR;
+ hdr_rx_pkt->packet_type =
+ RTE_PTYPE_L3_IPV6;
}
}
--
1.8.1.4
next prev parent reply other threads:[~2015-01-19 3:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 3:23 [dpdk-dev] [RFC 00/17] " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 01/17] mbuf: add definitions of unified packet types Helin Zhang
2015-01-19 16:19 ` Ananyev, Konstantin
2015-01-20 3:47 ` Zhang, Helin
2015-01-19 16:33 ` Neil Horman
2015-01-19 17:27 ` Olivier MATZ
2015-01-19 18:15 ` Neil Horman
2015-01-20 2:28 ` Zhang, Helin
2015-01-20 9:53 ` Olivier MATZ
2015-01-19 3:23 ` [dpdk-dev] [RFC 02/17] e1000: support of unified packet type Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 03/17] ixgbe: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 04/17] " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 05/17] i40e: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 06/17] bond: " Helin Zhang
2015-01-19 3:23 ` Helin Zhang [this message]
2015-01-19 3:23 ` [dpdk-dev] [RFC 08/17] vmxnet3: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 09/17] app/test-pipeline: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 10/17] app/test-pmd: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 11/17] app/test: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 12/17] examples/ip_fragmentation: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 13/17] examples/ip_reassembly: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 14/17] examples/l3fwd-acl: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 15/17] examples/l3fwd-power: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 16/17] examples/l3fwd: " Helin Zhang
2015-01-19 3:23 ` [dpdk-dev] [RFC 17/17] mbuf: remove old packet type bit masks for ol_flags Helin Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421637803-17034-8-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).