DPDK patches and discussions
 help / color / mirror / Atom feed
From: Danny Zhou <danny.zhou@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC PATCH 2/5] ixgbe: enable rx queue interrupts
Date: Tue, 20 Jan 2015 17:53:57 +0800	[thread overview]
Message-ID: <1421747640-20978-3-git-send-email-danny.zhou@intel.com> (raw)
In-Reply-To: <1421747640-20978-1-git-send-email-danny.zhou@intel.com>


Signed-off-by: Danny Zhou <danny.zhou@intel.com>
---
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 203 ++++++++++++++++++++++++++++++++++++
 1 file changed, 203 insertions(+)

diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 3fc3738..1d694c5 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -173,6 +173,7 @@ static int ixgbe_dev_rss_reta_query(struct rte_eth_dev *dev,
 			uint16_t reta_size);
 static void ixgbe_dev_link_status_print(struct rte_eth_dev *dev);
 static int ixgbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev);
+static int ixgbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
 static int ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev);
 static int ixgbe_dev_interrupt_action(struct rte_eth_dev *dev);
 static void ixgbe_dev_interrupt_handler(struct rte_intr_handle *handle,
@@ -217,6 +218,11 @@ static int ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
 static int ixgbe_mirror_rule_reset(struct rte_eth_dev *dev,
 		uint8_t	rule_id);
 
+static int ixgbe_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
+static int ixgbe_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
+static void ixgbe_set_ivar(struct ixgbe_hw *hw, s8 direction, u8 queue, u8 msix_vector);
+static void ixgbe_configure_msix(struct  ixgbe_hw *hw);
+
 static int ixgbe_set_queue_rate_limit(struct rte_eth_dev *dev,
 		uint16_t queue_idx, uint16_t tx_rate);
 static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
@@ -332,6 +338,8 @@ static struct eth_dev_ops ixgbe_eth_dev_ops = {
 	.tx_queue_start	      = ixgbe_dev_tx_queue_start,
 	.tx_queue_stop        = ixgbe_dev_tx_queue_stop,
 	.rx_queue_setup       = ixgbe_dev_rx_queue_setup,
+	.rx_queue_intr_enable = ixgbe_dev_rx_queue_intr_enable,
+	.rx_queue_intr_disable = ixgbe_dev_rx_queue_intr_disable,
 	.rx_queue_release     = ixgbe_dev_rx_queue_release,
 	.rx_queue_count       = ixgbe_dev_rx_queue_count,
 	.rx_descriptor_done   = ixgbe_dev_rx_descriptor_done,
@@ -1481,6 +1489,9 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 	/* configure PF module if SRIOV enabled */
 	ixgbe_pf_host_configure(dev);
 
+	/* confiugre msix for  sleep until  rx interrupt */
+	ixgbe_configure_msix(hw);
+
 	/* initialize transmission unit */
 	ixgbe_dev_tx_init(dev);
 
@@ -1550,6 +1561,10 @@ skip_link_setup:
 	if (dev->data->dev_conf.intr_conf.lsc != 0)
 		ixgbe_dev_lsc_interrupt_setup(dev);
 
+	/* check if rxq interrupt is enabled */
+	if (dev->data->dev_conf.intr_conf.rxq != 0)
+		ixgbe_dev_rxq_interrupt_setup(dev);
+
 	/* resume enabled intr since hw reset */
 	ixgbe_enable_intr(dev);
 
@@ -2212,6 +2227,28 @@ ixgbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev)
 	return 0;
 }
 
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during nic initialized.
+ *
+ * @param dev
+ *  Pointer to struct rte_eth_dev.
+ *
+ * @return
+ *  - On success, zero.
+ *  - On failure, a negative value.
+ */
+static int
+ixgbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
+{
+	struct ixgbe_interrupt *intr =
+		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+
+	intr->mask |= IXGBE_EICR_RTX_QUEUE;
+
+	return 0;
+}
+
 /*
  * It reads ICR and sets flag (IXGBE_EICR_LSC) for the link_update.
  *
@@ -3502,6 +3539,172 @@ ixgbe_mirror_rule_reset(struct rte_eth_dev *dev, uint8_t rule_id)
 	return 0;
 }
 
+static int
+ixgbe_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
+{
+	u32 mask;
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_interrupt *intr =
+		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+
+	if (queue_id < 16) {
+		ixgbe_disable_intr(hw);
+		intr->mask |= (1 << queue_id);
+		ixgbe_enable_intr(dev);
+	} else if (queue_id < 32) {
+		mask = IXGBE_READ_REG(hw, IXGBE_EIMS_EX(0));
+		mask &= (1 << queue_id);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
+	} else if (queue_id < 64) {
+		mask = IXGBE_READ_REG(hw, IXGBE_EIMS_EX(1));
+		mask &= (1 << (queue_id - 32));
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
+	}
+
+	return 0;
+}
+
+static int
+ixgbe_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
+{
+	u32 mask;
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_interrupt *intr =
+		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+
+	if (queue_id < 16) {
+		ixgbe_disable_intr(hw);
+		intr->mask &= ~(1 << queue_id);
+		ixgbe_enable_intr(dev);
+	} else if (queue_id < 32) {
+		mask = IXGBE_READ_REG(hw, IXGBE_EIMS_EX(0));
+		mask &= ~(1 << queue_id);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
+	} else if (queue_id < 64) {
+		mask = IXGBE_READ_REG(hw, IXGBE_EIMS_EX(1));
+		mask &= ~(1 << (queue_id - 32));
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @hw: pointer to ixgbe_hw struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ */
+static void
+ixgbe_set_ivar(struct ixgbe_hw *hw, s8 direction,
+			   u8 queue, u8 msix_vector)
+{
+	u32 ivar, index;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+		if (direction == -1)
+			direction = 0;
+		index = (((direction * 64) + queue) >> 2) & 0x1F;
+		ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
+		ivar &= ~(0xFF << (8 * (queue & 0x3)));
+		ivar |= (msix_vector << (8 * (queue & 0x3)));
+		IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		if (direction == -1) {
+			/* other causes */
+			msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+			index = ((queue & 1) * 8);
+			ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
+			ivar &= ~(0xFF << index);
+			ivar |= (msix_vector << index);
+			IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
+			break;
+		} else {
+			/* tx or rx causes */
+			msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+			index = ((16 * (queue & 1)) + (8 * direction));
+			ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1));
+			ivar &= ~(0xFF << index);
+			ivar |= (msix_vector << index);
+			IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar);
+			break;
+		}
+	default:
+		break;
+	}
+}
+
+/**
+ * ixgbe_configure_msix - Configure MSI-X hardware
+ * @hw: board private structure
+ * ixgbe_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ */
+static void
+ixgbe_configure_msix(struct ixgbe_hw *hw)
+{
+	int queue_id;
+	u32 mask;
+	u32 gpie;
+
+	/* set GPIE for in MSI-x mode */
+	gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+	gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
+		   IXGBE_GPIE_OCD;
+	gpie |= IXGBE_GPIE_EIAME;
+	/*
+	 * use EIAM to auto-mask when MSI-X interrupt is asserted
+	 * this saves a register write for every interrupt
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	default:
+		IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
+		IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
+		break;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+
+	/*
+	* Populate the IVAR table and set the ITR values to the
+	* corresponding register.
+	*/
+	for (queue_id = 0; queue_id < VFIO_MAX_QUEUE_ID; queue_id++)
+		ixgbe_set_ivar(hw, 0, queue_id, queue_id);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ixgbe_set_ivar(hw, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
+			       VFIO_MAX_QUEUE_ID);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		ixgbe_set_ivar(hw, -1, 1, 32);
+		break;
+	default:
+		break;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_EITR(queue_id), 1950);
+
+	/* set up to autoclear timer, and the vectors */
+	mask = IXGBE_EIMS_ENABLE_MASK;
+	mask &= ~(IXGBE_EIMS_OTHER |
+		  IXGBE_EIMS_MAILBOX |
+		  IXGBE_EIMS_LSC);
+
+	IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
+}
+
 static int ixgbe_set_queue_rate_limit(struct rte_eth_dev *dev,
 	uint16_t queue_idx, uint16_t tx_rate)
 {
-- 
1.8.1.4

  parent reply	other threads:[~2015-01-20  9:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-20  9:53 [dpdk-dev] [RFC PATCH 0/5] Introduce low-latency one-shot rx interrupt into DPDK with polling/interrupt switch control example Danny Zhou
2015-01-20  9:53 ` [dpdk-dev] [RFC PATCH 1/5] ethdev: add rx interrupt enable/disable functions Danny Zhou
2015-01-20  9:53 ` Danny Zhou [this message]
2015-01-20  9:53 ` [dpdk-dev] [RFC PATCH 3/5] eal: add per rx queue interrupt handling based on VFIO Danny Zhou
2015-01-20  9:53 ` [dpdk-dev] [RFC PATCH 4/5] L3fwd-power: enable one-shot rx interrupt and polling/interrupt mode switch Danny Zhou
2015-01-20  9:54 ` [dpdk-dev] [RFC PATCH 5/5] ixgbe: enable rx queue interrupts for VF Danny Zhou
2015-01-23  9:22 ` [dpdk-dev] [RFC PATCH 0/5] Introduce low-latency one-shot rx interrupt into DPDK with polling/interrupt switch control example Ivan Boule
2015-01-23 10:16   ` Zhou, Danny
2015-01-26 17:07 ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421747640-20978-3-git-send-email-danny.zhou@intel.com \
    --to=danny.zhou@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).