[dpdk-dev] [PATCH] doc: commands changed in testpmd_funcs for ethertype filter

[Jingjing Wu <jingjing.wu@intel.com>]

new commands for ethertype filter
      - ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
        (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 46 +++++++----------------------
 1 file changed, 11 insertions(+), 35 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index be935c2..61a7f6d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1397,56 +1397,32 @@ add_ethertype_filter
 
 Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
 
-add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
+ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr) (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
 
 The available information parameters are:
 
 *   port_id:  the port which the Ethertype filter assigned on.
 
-*   eth_value: the EtherType value want to match,
-    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
-
-*   enable: user priority participates in the match.
-
-*   disable: user priority doesn't participate in the match.
-
-*   pri_value: user priority value that want to match.
-
-*   queue_id : The receive queue associated with this EtherType filter
+*   mac_addr: need compare destination mac address.
 
-*   index: the index of this EtherType filter
-
-Example:
-
-.. code-block:: console
+*   mac_ignr: ignore destination mac address match.
 
-    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
-    Assign ARP packet to receive queue 3
+*   mac_address: destination mac address need to match.
 
-remove_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Remove a L2 Ethertype filter
-
-remove_ethertype_filter (port_id) index (idx)
-
-get_ethertype_filter
-~~~~~~~~~~~~~~~~~~~~
-
-Get and display a L2 Ethertype filter
+*   ether_type: the EtherType value want to match,
+    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
 
-get_ethertype_filter (port_id) index (idx)
+*   queue_id : The receive queue associated with this EtherType filter. It is meaningless when deleting or dropping.
 
 Example:
 
 .. code-block:: console
 
-    testpmd> get_ethertype_filter 0 index 0
+    testpmd> ethertype_filter 0 add mac_ignr ethertype 0x0806 fwd queue 3
+    add a rule to assign ARP packet to receive queue 3
 
-    filter[0]:
-        ethertype: 0x0806
-        priority: disable, 0
-        queue: 3
+	testpmd> ethertype_filter 0 del mac_ignr ethertype 0x0806 fwd queue 3
+    delete the rule to assign ARP packet to receive queue 3
 
 add_2tuple_filter
 ~~~~~~~~~~~~~~~~~
-- 
1.9.3