From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v9 5/5] app/testpmd: add commands to support hash functions
Date: Thu, 22 Jan 2015 15:36:59 +0800 [thread overview]
Message-ID: <1421912219-1946-6-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1421912219-1946-1-git-send-email-helin.zhang@intel.com>
To demonstrate the hash filter control, commands are added.
They are,
- get_sym_hash_ena_per_port
- set_sym_hash_ena_per_port
- get_hash_global_config
- set_hash_global_config
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
app/test-pmd/cmdline.c | 333 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 333 insertions(+)
v6 changes:
* Flow type strings are used to replace Packet Classification Types, to isolate
hardware specific things.
v7 changes:
* Removed commands of,
get_sym_hash_ena_per_pctype
set_sym_hash_ena_per_pctype
get_filter_swap
set_filter_swap
get_hash_function
set_hash_function.
* Added new commands of,
get_hash_global_config
set_hash_global_config
v8 changes:
* Fixed the compile issue on ICC, of "error #188: enumerated type mixed with
another type".
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 4beb404..590e427 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -75,6 +75,7 @@
#include <rte_ethdev.h>
#include <rte_string_fns.h>
#include <rte_devargs.h>
+#include <rte_eth_ctrl.h>
#include <cmdline_rdline.h>
#include <cmdline_parse.h>
@@ -735,6 +736,21 @@ static void cmd_help_long_parsed(void *parsed_result,
"flow_director_flex_payload (port_id)"
" (l2|l3|l4) (config)\n"
" Configure flex payload selection.\n\n"
+
+ "get_sym_hash_ena_per_port (port_id)\n"
+ " get symmetric hash enable configuration per port.\n\n"
+
+ "set_sym_hash_ena_per_port (port_id) (enable|disable)\n"
+ " set symmetric hash enable configuration per port"
+ " to enable or disable.\n\n"
+
+ "get_hash_global_config (port_id)\n"
+ " Get the global configurations of hash filters.\n\n"
+
+ "set_hash_global_config (port_id) (toeplitz|simple_xor|default)"
+ " (ip4|ip4-frag|tcp4|udp4|#sctp4|ip6|ip6-frag|tcp6|udp6|sctp6)"
+ " (enable|disable)\n"
+ " Set the global configurations of hash filters.\n\n"
);
}
}
@@ -8670,6 +8686,319 @@ cmdline_parse_inst_t cmd_set_flow_director_flex_payload = {
},
};
+/* *** Classification Filters Control *** */
+/* *** Get symmetric hash enable per port *** */
+struct cmd_get_sym_hash_ena_per_port_result {
+ cmdline_fixed_string_t get_sym_hash_ena_per_port;
+ uint8_t port_id;
+};
+
+static void
+cmd_get_sym_hash_per_port_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_get_sym_hash_ena_per_port_result *res = parsed_result;
+ struct rte_eth_hash_filter_info info;
+ int ret;
+
+ if (rte_eth_dev_filter_supported(res->port_id,
+ RTE_ETH_FILTER_HASH) < 0) {
+ printf("RTE_ETH_FILTER_HASH not supported on port: %d\n",
+ res->port_id);
+ return;
+ }
+
+ memset(&info, 0, sizeof(info));
+ info.info_type = RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT;
+ ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_GET, &info);
+
+ if (ret < 0) {
+ printf("Cannot get symmetric hash enable per port "
+ "on port %u\n", res->port_id);
+ return;
+ }
+
+ printf("Symmetric hash is %s on port %u\n", info.info.enable ?
+ "enabled" : "disabled", res->port_id);
+}
+
+cmdline_parse_token_string_t cmd_get_sym_hash_ena_per_port_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_get_sym_hash_ena_per_port_result,
+ get_sym_hash_ena_per_port, "get_sym_hash_ena_per_port");
+cmdline_parse_token_num_t cmd_get_sym_hash_ena_per_port_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_get_sym_hash_ena_per_port_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_get_sym_hash_ena_per_port = {
+ .f = cmd_get_sym_hash_per_port_parsed,
+ .data = NULL,
+ .help_str = "get_sym_hash_ena_per_port port_id",
+ .tokens = {
+ (void *)&cmd_get_sym_hash_ena_per_port_all,
+ (void *)&cmd_get_sym_hash_ena_per_port_port_id,
+ NULL,
+ },
+};
+
+/* *** Set symmetric hash enable per port *** */
+struct cmd_set_sym_hash_ena_per_port_result {
+ cmdline_fixed_string_t set_sym_hash_ena_per_port;
+ cmdline_fixed_string_t enable;
+ uint8_t port_id;
+};
+
+static void
+cmd_set_sym_hash_per_port_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_set_sym_hash_ena_per_port_result *res = parsed_result;
+ struct rte_eth_hash_filter_info info;
+ int ret;
+
+ if (rte_eth_dev_filter_supported(res->port_id,
+ RTE_ETH_FILTER_HASH) < 0) {
+ printf("RTE_ETH_FILTER_HASH not supported on port: %d\n",
+ res->port_id);
+ return;
+ }
+
+ memset(&info, 0, sizeof(info));
+ info.info_type = RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT;
+ if (!strcmp(res->enable, "enable"))
+ info.info.enable = 1;
+ ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_SET, &info);
+ if (ret < 0) {
+ printf("Cannot set symmetric hash enable per port on "
+ "port %u\n", res->port_id);
+ return;
+ }
+ printf("Symmetric hash has been set to %s on port %u\n",
+ res->enable, res->port_id);
+}
+
+cmdline_parse_token_string_t cmd_set_sym_hash_ena_per_port_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_sym_hash_ena_per_port_result,
+ set_sym_hash_ena_per_port, "set_sym_hash_ena_per_port");
+cmdline_parse_token_num_t cmd_set_sym_hash_ena_per_port_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_sym_hash_ena_per_port_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_set_sym_hash_ena_per_port_enable =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_sym_hash_ena_per_port_result,
+ enable, "enable#disable");
+
+cmdline_parse_inst_t cmd_set_sym_hash_ena_per_port = {
+ .f = cmd_set_sym_hash_per_port_parsed,
+ .data = NULL,
+ .help_str = "set_sym_hash_ena_per_port port_id enable|disable",
+ .tokens = {
+ (void *)&cmd_set_sym_hash_ena_per_port_all,
+ (void *)&cmd_set_sym_hash_ena_per_port_port_id,
+ (void *)&cmd_set_sym_hash_ena_per_port_enable,
+ NULL,
+ },
+};
+
+/* Get global config of hash function */
+struct cmd_get_hash_global_config_result {
+ cmdline_fixed_string_t get_hash_global_config;
+ uint8_t port_id;
+};
+
+static char *
+flowtype_to_str(enum rte_eth_flow_type ftype)
+{
+ uint16_t i;
+ static struct {
+ char str[16];
+ enum rte_eth_flow_type ftype;
+ } ftype_table[] = {
+ {"ip4", RTE_ETH_FLOW_TYPE_IPV4_OTHER},
+ {"ip4-frag", RTE_ETH_FLOW_TYPE_FRAG_IPV4},
+ {"udp4", RTE_ETH_FLOW_TYPE_UDPV4},
+ {"tcp4", RTE_ETH_FLOW_TYPE_TCPV4},
+ {"sctp4", RTE_ETH_FLOW_TYPE_SCTPV4},
+ {"ip6", RTE_ETH_FLOW_TYPE_IPV6_OTHER},
+ {"ip6-frag", RTE_ETH_FLOW_TYPE_FRAG_IPV6},
+ {"udp6", RTE_ETH_FLOW_TYPE_UDPV6},
+ {"tcp6", RTE_ETH_FLOW_TYPE_TCPV6},
+ {"sctp6", RTE_ETH_FLOW_TYPE_TCPV6},
+ };
+
+ for (i = 0; i < RTE_DIM(ftype_table); i++) {
+ if (ftype_table[i].ftype == ftype)
+ return ftype_table[i].str;
+ }
+
+ return NULL;
+}
+
+static void
+cmd_get_hash_global_config_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_get_hash_global_config_result *res = parsed_result;
+ struct rte_eth_hash_filter_info info;
+ uint32_t idx, offset, i;
+ char *str;
+ int ret;
+
+ if (rte_eth_dev_filter_supported(res->port_id,
+ RTE_ETH_FILTER_HASH) < 0) {
+ printf("RTE_ETH_FILTER_HASH not supported on port %d\n",
+ res->port_id);
+ return;
+ }
+
+ memset(&info, 0, sizeof(info));
+ info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG;
+ ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_GET, &info);
+ if (ret < 0) {
+ printf("Cannot get hash global configurations by port %d\n",
+ res->port_id);
+ return;
+ }
+
+ switch (info.info.global_conf.hash_func) {
+ case RTE_ETH_HASH_FUNCTION_TOEPLITZ:
+ printf("Hash function is Toeplitz\n");
+ break;
+ case RTE_ETH_HASH_FUNCTION_SIMPLE_XOR:
+ printf("Hash function is Simple XOR\n");
+ break;
+ default:
+ printf("Unknown hash function\n");
+ break;
+ }
+
+ for (i = 0; i < RTE_ETH_FLOW_TYPE_MAX; i++) {
+ idx = i / UINT32_BIT;
+ offset = i % UINT32_BIT;
+ if (!(info.info.global_conf.valid_bit_mask[idx] &
+ (1UL << offset)))
+ continue;
+ str = flowtype_to_str((enum rte_eth_flow_type)i);
+ if (!str)
+ continue;
+ printf("Symmetric hash is %s globally for flow type %s "
+ "by port %d\n",
+ ((info.info.global_conf.sym_hash_enable_mask[idx] &
+ (1UL << offset)) ? "enabled" : "disabled"), str,
+ res->port_id);
+ }
+}
+
+cmdline_parse_token_string_t cmd_get_hash_global_config_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_get_hash_global_config_result,
+ get_hash_global_config, "get_hash_global_config");
+cmdline_parse_token_num_t cmd_get_hash_global_config_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_get_hash_global_config_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_get_hash_global_config = {
+ .f = cmd_get_hash_global_config_parsed,
+ .data = NULL,
+ .help_str = "get_hash_global_config port_id",
+ .tokens = {
+ (void *)&cmd_get_hash_global_config_all,
+ (void *)&cmd_get_hash_global_config_port_id,
+ NULL,
+ },
+};
+
+/* Set global config of hash function */
+struct cmd_set_hash_global_config_result {
+ cmdline_fixed_string_t set_hash_global_config;
+ uint8_t port_id;
+ cmdline_fixed_string_t hash_func;
+ cmdline_fixed_string_t flow_type;
+ cmdline_fixed_string_t enable;
+};
+
+static void
+cmd_set_hash_global_config_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_set_hash_global_config_result *res = parsed_result;
+ struct rte_eth_hash_filter_info info;
+ uint32_t ftype, idx, offset;
+ int ret;
+
+ if (rte_eth_dev_filter_supported(res->port_id,
+ RTE_ETH_FILTER_HASH) < 0) {
+ printf("RTE_ETH_FILTER_HASH not supported on port %d\n",
+ res->port_id);
+ return;
+ }
+ memset(&info, 0, sizeof(info));
+ info.info_type = RTE_ETH_HASH_FILTER_GLOBAL_CONFIG;
+ if (!strcmp(res->hash_func, "toeplitz"))
+ info.info.global_conf.hash_func =
+ RTE_ETH_HASH_FUNCTION_TOEPLITZ;
+ else if (!strcmp(res->hash_func, "simple_xor"))
+ info.info.global_conf.hash_func =
+ RTE_ETH_HASH_FUNCTION_SIMPLE_XOR;
+ else if (!strcmp(res->hash_func, "default"))
+ info.info.global_conf.hash_func =
+ RTE_ETH_HASH_FUNCTION_DEFAULT;
+
+ ftype = str2flowtype(res->flow_type);
+ idx = ftype / (CHAR_BIT * sizeof(uint32_t));
+ offset = ftype % (CHAR_BIT * sizeof(uint32_t));
+ info.info.global_conf.valid_bit_mask[idx] |= (1UL << offset);
+ if (!strcmp(res->enable, "enable"))
+ info.info.global_conf.sym_hash_enable_mask[idx] |=
+ (1UL << offset);
+ ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_SET, &info);
+ if (ret < 0)
+ printf("Cannot set global hash configurations by port %d\n",
+ res->port_id);
+ else
+ printf("Global hash configurations have been set "
+ "succcessfully by port %d\n", res->port_id);
+}
+
+cmdline_parse_token_string_t cmd_set_hash_global_config_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
+ set_hash_global_config, "set_hash_global_config");
+cmdline_parse_token_num_t cmd_set_hash_global_config_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_hash_global_config_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_set_hash_global_config_hash_func =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
+ hash_func, "toeplitz#simple_xor#default");
+cmdline_parse_token_string_t cmd_set_hash_global_config_flow_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
+ flow_type,
+ "ip4#ip4-frag#tcp4#udp4#sctp4#ip6#ip6-frag#tcp6#udp6#sctp6");
+cmdline_parse_token_string_t cmd_set_hash_global_config_enable =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_hash_global_config_result,
+ enable, "enable#disable");
+
+cmdline_parse_inst_t cmd_set_hash_global_config = {
+ .f = cmd_set_hash_global_config_parsed,
+ .data = NULL,
+ .help_str = "set_hash_global_config port_id "
+ "toeplitz|simple_xor|default "
+ "ip4|ip4-frag|tcp4|udp4|#sctp4|ip6|ip6-frag|tcp6|udp6|sctp6 "
+ "enable|disable",
+ .tokens = {
+ (void *)&cmd_set_hash_global_config_all,
+ (void *)&cmd_set_hash_global_config_port_id,
+ (void *)&cmd_set_hash_global_config_hash_func,
+ (void *)&cmd_set_hash_global_config_flow_type,
+ (void *)&cmd_set_hash_global_config_enable,
+ NULL,
+ },
+};
+
/* ******************************************************************************** */
/* list of instructions */
@@ -8807,6 +9136,10 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_flush_flow_director,
(cmdline_parse_inst_t *)&cmd_set_flow_director_flex_mask,
(cmdline_parse_inst_t *)&cmd_set_flow_director_flex_payload,
+ (cmdline_parse_inst_t *)&cmd_get_sym_hash_ena_per_port,
+ (cmdline_parse_inst_t *)&cmd_set_sym_hash_ena_per_port,
+ (cmdline_parse_inst_t *)&cmd_get_hash_global_config,
+ (cmdline_parse_inst_t *)&cmd_set_hash_global_config,
NULL,
};
--
1.8.1.4
next prev parent reply other threads:[~2015-01-22 7:37 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 6:20 [dpdk-dev] [PATCH v3 0/7] Support configuring " Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 1/7] ethdev: add more annotations Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 0/7] Support configuring hash functions Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 1/7] ethdev: add more annotations Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 2/7] ethdev: add interfaces and relevant for filter control Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add structures and enum for hash " Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 4/7] i40e: add hash filter control implementation Helin Zhang
2014-10-13 10:23 ` Chilikin, Andrey
2014-10-14 0:42 ` Zhang, Helin
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 5/7] i40e: add hardware initialization Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 6/7] i40e: Use constant random hash keys Helin Zhang
2014-10-13 6:12 ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: add commands to support hash filter control Helin Zhang
2014-10-13 12:27 ` [dpdk-dev] [PATCH v4 0/7] Support configuring hash functions Zhan, Zhaochen
2014-10-14 3:32 ` Wu, Jingjing
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 0/5] " Helin Zhang
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 1/5] i40e: Use constant random hash keys Helin Zhang
2014-11-03 7:49 ` Thomas Monjalon
2014-11-03 8:18 ` Zhang, Helin
2014-11-03 8:59 ` Thomas Monjalon
2014-11-06 7:52 ` Zhang, Helin
2014-11-11 3:30 ` Zhang, Helin
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 2/5] ethdev: add enum type and relevant structures for hash filter control Helin Zhang
2014-11-03 7:57 ` Thomas Monjalon
2014-11-06 3:41 ` Zhang, Helin
2014-11-06 8:43 ` Thomas Monjalon
2014-11-06 8:54 ` Zhang, Helin
2014-11-11 3:27 ` Zhang, Helin
2014-11-11 6:46 ` Zhang, Helin
2014-11-11 21:08 ` Thomas Monjalon
2014-11-12 5:52 ` Zhang, Helin
2014-11-12 9:30 ` Thomas Monjalon
2014-11-12 14:22 ` Zhang, Helin
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 3/5] i40e: add hash filter control implementation Helin Zhang
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 4/5] i40e: add hardware initialization Helin Zhang
2014-10-21 3:14 ` [dpdk-dev] [PATCH v5 5/5] app/testpmd: add commands to support hash filter Helin Zhang
2014-11-07 3:45 ` [dpdk-dev] [PATCH v5 0/5] Support configuring hash functions Chen, Erlu
2014-11-07 6:12 ` Chen, Erlu
2014-11-19 14:58 ` [dpdk-dev] [PATCH v6 0/3] " Helin Zhang
2014-11-19 14:58 ` [dpdk-dev] [PATCH v6 1/3] i40e: Use constant as the default hash keys Helin Zhang
2014-11-19 14:58 ` [dpdk-dev] [PATCH v6 2/3] i40e: support of controlling hash functions Helin Zhang
2014-11-19 14:58 ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: add commands to support " Helin Zhang
2014-11-27 15:45 ` [dpdk-dev] [PATCH v6 0/3] Support configuring " Thomas Monjalon
2014-11-27 16:17 ` Zhang, Helin
2014-11-28 12:14 ` [dpdk-dev] [PATCH v7 0/4] " Helin Zhang
2014-11-28 12:14 ` [dpdk-dev] [PATCH v7 1/4] ethdev: code style fixes Helin Zhang
2014-11-28 12:14 ` [dpdk-dev] [PATCH v7 2/4] i40e: use constant as the default hash keys Helin Zhang
2014-11-28 12:14 ` [dpdk-dev] [PATCH v7 3/4] i40e: support of controlling hash functions Helin Zhang
2014-11-28 12:52 ` Ananyev, Konstantin
2014-11-28 12:14 ` [dpdk-dev] [PATCH v7 4/4] app/testpmd: app/testpmd: add commands to support " Helin Zhang
2014-12-02 2:19 ` [dpdk-dev] [PATCH v8 0/4] Support configuring " Helin Zhang
2014-12-02 2:19 ` [dpdk-dev] [PATCH v8 1/4] ethdev: code style fixes Helin Zhang
2014-12-02 2:19 ` [dpdk-dev] [PATCH v8 2/4] i40e: use constant as the default hash keys Helin Zhang
2014-12-02 2:19 ` [dpdk-dev] [PATCH v8 3/4] i40e: support of controlling hash functions Helin Zhang
2015-01-20 7:54 ` Thomas Monjalon
2015-01-21 0:13 ` Zhang, Helin
2015-01-22 7:44 ` Zhang, Helin
2014-12-02 2:19 ` [dpdk-dev] [PATCH v8 4/4] app/testpmd: add commands to support " Helin Zhang
2014-12-02 13:15 ` [dpdk-dev] [PATCH v8 0/4] Support configuring " Ananyev, Konstantin
2015-01-22 7:36 ` [dpdk-dev] [PATCH v9 0/5] " Helin Zhang
2015-01-22 7:36 ` [dpdk-dev] [PATCH v9 1/5] i40e: use constant as the default hash keys Helin Zhang
2015-01-22 7:36 ` [dpdk-dev] [PATCH v9 2/5] ethdev: code style fixes Helin Zhang
2015-01-22 7:36 ` [dpdk-dev] [PATCH v9 3/5] ethdev: support of configuring hash functions Helin Zhang
2015-01-22 7:36 ` [dpdk-dev] [PATCH v9 4/5] i40e: support of controlling " Helin Zhang
2015-01-22 7:36 ` Helin Zhang [this message]
[not found] ` <5028514.8nkR6oWFO2@xps13>
2015-02-03 2:35 ` [dpdk-dev] [PATCH v9 5/5] app/testpmd: add commands to support " Zhang, Helin
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 2/7] ethdev: add interfaces and relevant for filter control Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add structures and enum for hash " Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 4/7] i40e: add hash filter control implementation Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 5/7] i40e: add hardware initialization Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 6/7] i40e: Use constant random hash keys Helin Zhang
2014-09-30 6:20 ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: add commands to support hash filter control Helin Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421912219-1946-6-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).