From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] testpmd: check return value of rte_eth_dev_vlan_filter()
Date: Fri, 23 Jan 2015 11:43:51 +0100 [thread overview]
Message-ID: <1422009831-11092-1-git-send-email-michalx.k.jastrzebski@intel.com> (raw)
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
---
app/test-pmd/config.c | 14 ++++++++------
app/test-pmd/testpmd.h | 2 +-
lib/librte_ether/rte_ethdev.c | 4 ++--
3 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 97b6525..6ef6cb0 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1643,21 +1643,22 @@ rx_vlan_filter_set(portid_t port_id, int on)
"diag=%d\n", port_id, on, diag);
}
-void
+int
rx_vft_set(portid_t port_id, uint16_t vlan_id, int on)
{
int diag;
if (port_id_is_invalid(port_id))
- return;
+ return 1;
if (vlan_id_is_invalid(vlan_id))
- return;
+ return 1;
diag = rte_eth_dev_vlan_filter(port_id, vlan_id, on);
if (diag == 0)
- return;
+ return 0;
printf("rte_eth_dev_vlan_filter(port_pi=%d, vlan_id=%d, on=%d) failed "
"diag=%d\n",
port_id, vlan_id, on, diag);
+ return -1;
}
void
@@ -1667,8 +1668,9 @@ rx_vlan_all_filter_set(portid_t port_id, int on)
if (port_id_is_invalid(port_id))
return;
- for (vlan_id = 0; vlan_id < 4096; vlan_id++)
- rx_vft_set(port_id, vlan_id, on);
+ for (vlan_id = 0; vlan_id < 4096; vlan_id++) {
+ if ( rx_vft_set(port_id, vlan_id, on) ) break;
+ }
}
void
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f8b0740..ee03a07 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -489,7 +489,7 @@ void rx_vlan_strip_set_on_queue(portid_t port_id, uint16_t queue_id, int on);
void rx_vlan_filter_set(portid_t port_id, int on);
void rx_vlan_all_filter_set(portid_t port_id, int on);
-void rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
+int rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
void vlan_extend_set(portid_t port_id, int on);
void vlan_tpid_set(portid_t port_id, uint16_t tp_id);
void tx_vlan_set(portid_t port_id, uint16_t vlan_id);
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 95f2ceb..2e720f7 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1478,8 +1478,8 @@ rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
return (-EINVAL);
}
FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_filter_set, -ENOTSUP);
- (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
- return (0);
+
+ return (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
}
int
--
1.7.9.5
next reply other threads:[~2015-01-23 10:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 10:43 Michal Jastrzebski [this message]
2015-01-27 10:33 ` Thomas Monjalon
2015-01-27 15:58 ` Jastrzebski, MichalX K
2015-01-27 22:22 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422009831-11092-1-git-send-email-michalx.k.jastrzebski@intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).