From: Michael Qiu <michael.qiu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] librte_pmd_ixgbe: Add queue start failure check
Date: Tue, 27 Jan 2015 20:16:18 +0800 [thread overview]
Message-ID: <1422360978-16954-1-git-send-email-michael.qiu@intel.com> (raw)
In-Reply-To: <1421333111-22136-1-git-send-email-michael.qiu@intel.com>
For ixgbe, when queue start failure, for example, mbuf allocate
failure, the device will still start success, which could be
an issue.
Add return status check of queue start to avoid this issue.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
---
v2 --> v1
. remove duplicated error message in ixgbe_dev_rxtx_start()
. remove '\n' in PMD_INIT_LOG()
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 6 +++++-
lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 2 +-
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 20 +++++++++++++++-----
3 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index b58ec45..ede8706 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -1495,7 +1495,11 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
goto error;
}
- ixgbe_dev_rxtx_start(dev);
+ err = ixgbe_dev_rxtx_start(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "Unable to start rxtx queues");
+ goto error;
+ }
if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
err = hw->mac.ops.setup_sfp(hw);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
index 677c257..1383194 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
@@ -265,7 +265,7 @@ int ixgbe_dev_rx_init(struct rte_eth_dev *dev);
void ixgbe_dev_tx_init(struct rte_eth_dev *dev);
-void ixgbe_dev_rxtx_start(struct rte_eth_dev *dev);
+int ixgbe_dev_rxtx_start(struct rte_eth_dev *dev);
int ixgbe_dev_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 840bc07..0224ed0 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -3806,7 +3806,7 @@ ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
/*
* Start Transmit and Receive Units.
*/
-void
+int
ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw;
@@ -3816,6 +3816,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
uint32_t dmatxctl;
uint32_t rxctrl;
uint16_t i;
+ int ret = 0;
PMD_INIT_FUNC_TRACE();
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -3838,14 +3839,22 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
for (i = 0; i < dev->data->nb_tx_queues; i++) {
txq = dev->data->tx_queues[i];
- if (!txq->tx_deferred_start)
- ixgbe_dev_tx_queue_start(dev, i);
+ if (!txq->tx_deferred_start) {
+ ret = ixgbe_dev_tx_queue_start(dev, i);
+ if (ret < 0) {
+ return ret;
+ }
+ }
}
for (i = 0; i < dev->data->nb_rx_queues; i++) {
rxq = dev->data->rx_queues[i];
- if (!rxq->rx_deferred_start)
- ixgbe_dev_rx_queue_start(dev, i);
+ if (!rxq->rx_deferred_start) {
+ ret = ixgbe_dev_rx_queue_start(dev, i);
+ if (ret < 0) {
+ return ret;
+ }
+ }
}
/* Enable Receive engine */
@@ -3860,6 +3869,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
ixgbe_setup_loopback_link_82599(hw);
+ return 0;
}
/*
--
1.9.3
next prev parent reply other threads:[~2015-01-27 12:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 14:45 [dpdk-dev] [PATCH] " Michael Qiu
2015-01-19 15:50 ` Qiu, Michael
2015-01-27 10:00 ` Thomas Monjalon
2015-01-27 12:00 ` Qiu, Michael
2015-01-27 14:14 ` Thomas Monjalon
2015-01-27 12:16 ` Michael Qiu [this message]
2015-01-27 14:12 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422360978-16954-1-git-send-email-michael.qiu@intel.com \
--to=michael.qiu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).