From: Dan Aloni <dan@kernelim.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] eal/linux: allow to map BARs with MSI-X tables, around them
Date: Thu, 29 Jan 2015 00:04:53 +0200 [thread overview]
Message-ID: <1422482693-14158-1-git-send-email-dan@kernelim.com> (raw)
In-Reply-To: <C6ECDF3AB251BE4894318F4E4512369780C3ECFA@IRSMSX109.ger.corp.intel.com>
While VFIO doesn't allow us to map complete BARs with MSI-X tables,
it does allow us to map around them in PAGE_SIZE granularity. There
might be adapters that provide their registers in the same BAR
but on a different page. For example, Intel's NVME adapter, though
not a network adapter, provides only one MMIO BAR that contains
the MSI-X table.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
lib/librte_eal/linuxapp/eal/eal_pci.c | 5 +-
lib/librte_eal/linuxapp/eal/eal_pci_init.h | 2 +-
lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 4 +-
lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 98 +++++++++++++++++++++++++++---
lib/librte_eal/linuxapp/eal/eal_vfio.h | 8 ++-
5 files changed, 100 insertions(+), 17 deletions(-)
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index b5f54101e8aa..4a74a9372a15 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -118,13 +118,14 @@ pci_find_max_end_va(void)
/* map a particular resource from a file */
void *
-pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size)
+pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size,
+ int additional_flags)
{
void *mapaddr;
/* Map the PCI memory resource of device */
mapaddr = mmap(requested_addr, size, PROT_READ | PROT_WRITE,
- MAP_SHARED, fd, offset);
+ MAP_SHARED | additional_flags, fd, offset);
if (mapaddr == MAP_FAILED) {
RTE_LOG(ERR, EAL, "%s(): cannot mmap(%d, %p, 0x%lx, 0x%lx): %s (%p)\n",
__func__, fd, requested_addr,
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_init.h b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
index 1070eb88fe0a..0a0853d4c4df 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
@@ -66,7 +66,7 @@ extern void *pci_map_addr;
void *pci_find_max_end_va(void);
void *pci_map_resource(void *requested_addr, int fd, off_t offset,
- size_t size);
+ size_t size, int additional_flags);
/* map IGB_UIO resource prototype */
int pci_uio_map_resource(struct rte_pci_device *dev);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
index e53f06b82430..eaa2e36f643e 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
@@ -139,7 +139,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
if (pci_map_resource(uio_res->maps[i].addr, fd,
(off_t)uio_res->maps[i].offset,
- (size_t)uio_res->maps[i].size)
+ (size_t)uio_res->maps[i].size, 0)
!= uio_res->maps[i].addr) {
RTE_LOG(ERR, EAL,
"Cannot mmap device resource\n");
@@ -379,7 +379,7 @@ pci_uio_map_resource(struct rte_pci_device *dev)
pci_map_addr = pci_find_max_end_va();
mapaddr = pci_map_resource(pci_map_addr, fd, (off_t)offset,
- (size_t)maps[j].size);
+ (size_t)maps[j].size, 0);
if (mapaddr == MAP_FAILED)
fail = 1;
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index 20e097727f80..c8df91c0f800 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -62,6 +62,9 @@
#ifdef VFIO_PRESENT
+#define PAGE_SIZE (sysconf(_SC_PAGESIZE))
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+
#define VFIO_DIR "/dev/vfio"
#define VFIO_CONTAINER_PATH "/dev/vfio/vfio"
#define VFIO_GROUP_FMT "/dev/vfio/%u"
@@ -72,10 +75,12 @@ static struct vfio_config vfio_cfg;
/* get PCI BAR number where MSI-X interrupts are */
static int
-pci_vfio_get_msix_bar(int fd, int *msix_bar)
+pci_vfio_get_msix_bar(int fd, int *msix_bar, uint32_t *msix_table_offset,
+ uint32_t *msix_table_size)
{
int ret;
uint32_t reg;
+ uint16_t flags;
uint8_t cap_id, cap_offset;
/* read PCI capability pointer from config space */
@@ -134,7 +139,18 @@ pci_vfio_get_msix_bar(int fd, int *msix_bar)
return -1;
}
+ ret = pread64(fd, &flags, sizeof(flags),
+ VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) +
+ cap_offset + 2);
+ if (ret != sizeof(flags)) {
+ RTE_LOG(ERR, EAL, "Cannot read table flags from PCI config "
+ "space!\n");
+ return -1;
+ }
+
*msix_bar = reg & RTE_PCI_MSIX_TABLE_BIR;
+ *msix_table_offset = reg & RTE_PCI_MSIX_TABLE_OFFSET;
+ *msix_table_size = 16 * (1 + (flags & RTE_PCI_MSIX_FLAGS_QSIZE));
return 0;
}
@@ -532,6 +548,8 @@ pci_vfio_map_resource(struct rte_pci_device *dev)
int i, ret, msix_bar;
struct mapped_pci_resource *vfio_res = NULL;
struct pci_map *maps;
+ uint32_t msix_table_offset = 0;
+ uint32_t msix_table_size = 0;
dev->intr_handle.fd = -1;
dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
@@ -657,9 +675,10 @@ pci_vfio_map_resource(struct rte_pci_device *dev)
}
/* get MSI-X BAR, if any (we have to know where it is because we can't
- * mmap it when using VFIO) */
+ * easily mmap it when using VFIO) */
msix_bar = -1;
- ret = pci_vfio_get_msix_bar(vfio_dev_fd, &msix_bar);
+ ret = pci_vfio_get_msix_bar(vfio_dev_fd, &msix_bar,
+ &msix_table_offset, &msix_table_size);
if (ret < 0) {
RTE_LOG(ERR, EAL, " %s cannot get MSI-X BAR number!\n", pci_addr);
close(vfio_dev_fd);
@@ -702,6 +721,9 @@ pci_vfio_map_resource(struct rte_pci_device *dev)
for (i = 0; i < (int) vfio_res->nb_maps; i++) {
struct vfio_region_info reg = { .argsz = sizeof(reg) };
void *bar_addr;
+ struct memreg {
+ uint32_t offset, size;
+ } memreg[2] = {};
reg.index = i;
@@ -720,21 +742,77 @@ pci_vfio_map_resource(struct rte_pci_device *dev)
if ((reg.flags & VFIO_REGION_INFO_FLAG_MMAP) == 0)
continue;
- /* skip MSI-X BAR */
- if (i == msix_bar)
- continue;
+ if (i == msix_bar) {
+ /*
+ * VFIO will not let us map the MSI-X table,
+ * but we can map around it.
+ */
+ uint32_t table_start = msix_table_offset;
+ uint32_t table_end = table_start + msix_table_size;
+ table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
+ table_start &= PAGE_MASK;
+
+ if (table_start == 0 && table_end >= reg.size) {
+ /* Cannot map this BAR */
+ RTE_LOG(DEBUG, EAL, "Skipping BAR %d\n", i);
+ continue;
+ } else {
+ memreg[0].offset = reg.offset;
+ memreg[0].size = table_start;
+ memreg[1].offset = table_end;
+ memreg[1].size = reg.size - table_end;
+
+ RTE_LOG(DEBUG, EAL,
+ "Trying to map BAR %d that contains the MSI-X "
+ "table. Trying offsets: "
+ "%04x:%04x, %04x:%04x\n", i,
+ memreg[0].offset, memreg[0].size,
+ memreg[1].offset, memreg[1].size);
+ }
+ } else {
+ memreg[0].offset = reg.offset;
+ memreg[0].size = reg.size;
+ }
+ /* try to figure out an address */
if (internal_config.process_type == RTE_PROC_PRIMARY) {
/* try mapping somewhere close to the end of hugepages */
if (pci_map_addr == NULL)
pci_map_addr = pci_find_max_end_va();
- bar_addr = pci_map_resource(pci_map_addr, vfio_dev_fd, reg.offset,
- reg.size);
+ bar_addr = pci_map_addr;
pci_map_addr = RTE_PTR_ADD(bar_addr, (size_t) reg.size);
} else {
- bar_addr = pci_map_resource(maps[i].addr, vfio_dev_fd, reg.offset,
- reg.size);
+ bar_addr = maps[i].addr;
+ }
+
+ /* reserve the address using an inaccessible mapping */
+ bar_addr = mmap(bar_addr, reg.size, 0, MAP_PRIVATE |
+ MAP_ANONYMOUS, -1, 0);
+ if (bar_addr != MAP_FAILED) {
+ void *map_addr = NULL;
+ if (memreg[0].size) {
+ /* actual map of first part */
+ map_addr = pci_map_resource(bar_addr, vfio_dev_fd,
+ memreg[0].offset,
+ memreg[0].size,
+ MAP_FIXED);
+ }
+
+ /* if there's a second part, try to map it */
+ if (map_addr != MAP_FAILED
+ && memreg[1].offset && memreg[1].size) {
+ void *second_addr = RTE_PTR_ADD(bar_addr, memreg[1].offset);
+ map_addr = pci_map_resource(second_addr,
+ vfio_dev_fd, memreg[1].offset,
+ memreg[1].size,
+ MAP_FIXED);
+ }
+
+ if (map_addr == MAP_FAILED || !map_addr) {
+ munmap(bar_addr, reg.size);
+ bar_addr = MAP_FAILED;
+ }
}
if (bar_addr == MAP_FAILED ||
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index 03e693e01bf0..72ec3f62a3d8 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -43,9 +43,13 @@
#include <linux/vfio.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0)
-#define RTE_PCI_MSIX_TABLE_BIR 0x7
+#define RTE_PCI_MSIX_TABLE_BIR 0x7
+#define RTE_PCI_MSIX_TABLE_OFFSET 0xfffffff8
+#define RTE_PCI_MSIX_FLAGS_QSIZE 0x07ff
#else
-#define RTE_PCI_MSIX_TABLE_BIR PCI_MSIX_TABLE_BIR
+#define RTE_PCI_MSIX_TABLE_BIR PCI_MSIX_TABLE_BIR
+#define RTE_PCI_MSIX_TABLE_OFFSET PCI_MSIX_TABLE_OFFSET
+#define RTE_PCI_MSIX_FLAGS_QSIZE PCI_MSIX_FLAGS_QSIZE
#endif
#define VFIO_PRESENT
--
1.9.3
next prev parent reply other threads:[~2015-01-28 22:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-22 8:36 [dpdk-dev] [PATCH] " Dan Aloni
2015-01-28 14:06 ` Dan Aloni
2015-01-28 15:01 ` Burakov, Anatoly
2015-01-28 22:04 ` Dan Aloni
2015-01-28 22:04 ` Dan Aloni [this message]
2015-01-29 10:22 ` [dpdk-dev] [PATCH v2] " Burakov, Anatoly
2015-01-29 10:25 ` Dan Aloni
2015-02-23 20:58 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422482693-14158-1-git-send-email-dan@kernelim.com \
--to=dan@kernelim.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).