[dpdk-dev] [PATCH v1 2/3] eal: add interrupt enable/disable routines for uio_pci_generic

[Danny Zhou <danny.zhou@intel.com>]

enable/disable interrupt by manipulating enable/disable bit of command register
on NIC's PCIe configuration space.

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Tested-by: Qun Wan <qun.wan@intel.com>
---
 lib/librte_eal/linuxapp/eal/eal_interrupts.c | 68 +++++++++++++++++++++-------
 1 file changed, 52 insertions(+), 16 deletions(-)

diff --git a/lib/librte_eal/linuxapp/eal/eal_interrupts.c b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
index dc2668a..8c5b834 100644
--- a/lib/librte_eal/linuxapp/eal/eal_interrupts.c
+++ b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
@@ -361,6 +361,54 @@ vfio_disable_msix(struct rte_intr_handle *intr_handle) {
 }
 #endif
 
+static int
+uio_intr_disable(struct rte_intr_handle *intr_handle)
+{
+	unsigned char command_high;
+
+	/* use UIO config file descriptor for uio_pci_generic */
+	if (pread(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+		RTE_LOG(ERR, EAL,
+			"Error reading interrupts status for fd %d\n",
+			intr_handle->uio_cfg_fd);
+		return -1;
+	}
+	/* disable interrupts */
+	command_high |= 0x4;
+	if (pwrite(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+		RTE_LOG(ERR, EAL,
+			"Error disabling interrupts for fd %d\n",
+			intr_handle->uio_cfg_fd);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+uio_intr_enable(struct rte_intr_handle *intr_handle)
+{
+	unsigned char command_high;
+
+	/* use UIO config file descriptor for uio_pci_generic */
+	if (pread(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+		RTE_LOG(ERR, EAL,
+			"Error reading interrupts status for fd %d\n",
+			intr_handle->uio_cfg_fd);
+		return -1;
+	}
+	/* enable interrupts */
+	command_high &= ~0x4;
+	if (pwrite(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+		RTE_LOG(ERR, EAL,
+			"Error enabling interrupts for fd %d\n",
+			intr_handle->uio_cfg_fd);
+		return -1;
+	}
+
+	return 0;
+}
+
 int
 rte_intr_callback_register(struct rte_intr_handle *intr_handle,
 			rte_intr_callback_fn cb, void *cb_arg)
@@ -500,20 +548,14 @@ rte_intr_callback_unregister(struct rte_intr_handle *intr_handle,
 int
 rte_intr_enable(struct rte_intr_handle *intr_handle)
 {
-	const int value = 1;
-
-	if (!intr_handle || intr_handle->fd < 0)
+	if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
 		return -1;
 
 	switch (intr_handle->type){
 	/* write to the uio fd to enable the interrupt */
 	case RTE_INTR_HANDLE_UIO:
-		if (write(intr_handle->fd, &value, sizeof(value)) < 0) {
-			RTE_LOG(ERR, EAL,
-				"Error enabling interrupts for fd %d\n",
-							intr_handle->fd);
+		if (uio_intr_enable(intr_handle))
 			return -1;
-		}
 		break;
 	/* not used at this moment */
 	case RTE_INTR_HANDLE_ALARM:
@@ -546,20 +588,14 @@ rte_intr_enable(struct rte_intr_handle *intr_handle)
 int
 rte_intr_disable(struct rte_intr_handle *intr_handle)
 {
-	const int value = 0;
-
-	if (!intr_handle || intr_handle->fd < 0)
+	if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
 		return -1;
 
 	switch (intr_handle->type){
 	/* write to the uio fd to disable the interrupt */
 	case RTE_INTR_HANDLE_UIO:
-		if (write(intr_handle->fd, &value, sizeof(value)) < 0){
-			RTE_LOG(ERR, EAL,
-				"Error disabling interrupts for fd %d\n",
-							intr_handle->fd);
+		if (uio_intr_disable(intr_handle))
 			return -1;
-		}
 		break;
 	/* not used at this moment */
 	case RTE_INTR_HANDLE_ALARM:
-- 
1.8.1.4