DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver
Date: Fri, 30 Jan 2015 13:07:21 +0800	[thread overview]
Message-ID: <1422594454-11045-6-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1422594454-11045-1-git-send-email-jing.d.chen@intel.com>

From: Jeff Shaw <jeffrey.b.shaw@intel.com>

1. Add function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
   fm10k_stats_get.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
 lib/librte_pmd_fm10k/fm10k_ethdev.c |  339 +++++++++++++++++++++++++++++++++++
 1 files changed, 339 insertions(+), 0 deletions(-)

diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index e69de29..400d841 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -0,0 +1,339 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2013-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_memzone.h>
+#include <rte_string_fns.h>
+#include <rte_dev.h>
+#include <rte_spinlock.h>
+
+#include "fm10k.h"
+#include "SHARED/fm10k_api.h"
+
+/* Default delay to acquire mailbox lock */
+#define FM10K_MBXLOCK_DELAY_US 20
+
+static void
+fm10k_mbx_initlock(struct fm10k_hw *hw)
+{
+	rte_spinlock_init(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back));
+}
+
+static void
+fm10k_mbx_lock(struct fm10k_hw *hw)
+{
+	while (!rte_spinlock_trylock(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back)))
+		rte_delay_us(FM10K_MBXLOCK_DELAY_US);
+}
+
+static void
+fm10k_mbx_unlock(struct fm10k_hw *hw)
+{
+	rte_spinlock_unlock(FM10K_DEV_PRIVATE_TO_MBXLOCK(hw->back));
+}
+
+static int
+fm10k_dev_configure(struct rte_eth_dev *dev)
+{
+	PMD_FUNC_TRACE();
+
+	if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
+		PMD_LOG(WARNING, "fm10k always strip CRC");
+
+	return 0;
+}
+
+static void
+fm10k_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+	uint64_t ipackets, opackets, ibytes, obytes;
+	struct fm10k_hw *hw =
+		FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct fm10k_hw_stats *hw_stats =
+		FM10K_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
+	int i;
+	PMD_FUNC_TRACE();
+
+	fm10k_update_hw_stats(hw, hw_stats);
+
+	ipackets = opackets = ibytes = obytes = 0;
+	for (i = 0; (i < RTE_ETHDEV_QUEUE_STAT_CNTRS) &&
+		(i < FM10K_MAX_QUEUES_PF); ++i) {
+		stats->q_ipackets[i] = hw_stats->q[i].rx_packets.count;
+		stats->q_opackets[i] = hw_stats->q[i].tx_packets.count;
+		stats->q_ibytes[i]   = hw_stats->q[i].rx_bytes.count;
+		stats->q_obytes[i]   = hw_stats->q[i].tx_bytes.count;
+		ipackets += stats->q_ipackets[i];
+		opackets += stats->q_opackets[i];
+		ibytes   += stats->q_ibytes[i];
+		obytes   += stats->q_obytes[i];
+	}
+	stats->ipackets = ipackets;
+	stats->opackets = opackets;
+	stats->ibytes = ibytes;
+	stats->obytes = obytes;
+}
+
+static void
+fm10k_stats_reset(struct rte_eth_dev *dev)
+{
+	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct fm10k_hw_stats *hw_stats =
+		FM10K_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
+	PMD_FUNC_TRACE();
+
+	memset(hw_stats, 0, sizeof(*hw_stats));
+	fm10k_rebind_hw_stats(hw, hw_stats);
+}
+
+/* Mailbox message handler in VF */
+static const struct fm10k_msg_data fm10k_msgdata_vf[] = {
+	FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
+	FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf),
+	FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
+	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
+};
+
+/* Mailbox message handler in PF */
+static const struct fm10k_msg_data fm10k_msgdata_pf[] = {
+	FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
+	FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf),
+	FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
+	FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf),
+	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
+};
+
+static int
+fm10k_setup_mbx_service(struct fm10k_hw *hw)
+{
+	int err;
+
+	/* Initialize mailbox lock */
+	fm10k_mbx_initlock(hw);
+
+	/* Replace default message handler with new ones */
+	if (hw->mac.type == fm10k_mac_pf)
+		err = hw->mbx.ops.register_handlers(&hw->mbx, fm10k_msgdata_pf);
+	else
+		err = hw->mbx.ops.register_handlers(&hw->mbx, fm10k_msgdata_vf);
+
+	if (err) {
+		PMD_LOG(ERR, "Failed to register mailbox handler.err:%d", err);
+		return err;
+	}
+	/* Connect to SM for PF device or PF for VF device */
+	return hw->mbx.ops.connect(hw, &hw->mbx);
+}
+
+static struct eth_dev_ops fm10k_eth_dev_ops = {
+	.dev_configure           = fm10k_dev_configure,
+	.stats_get               = fm10k_stats_get,
+	.stats_reset             = fm10k_stats_reset,
+};
+
+static int
+eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
+	struct rte_eth_dev *dev)
+{
+	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	int diag;
+	PMD_FUNC_TRACE();
+
+	dev->dev_ops = &fm10k_eth_dev_ops;
+
+	/* only initialize in the primary process */
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return 0;
+
+	/* Vendor and Device ID need to be set before init of shared code */
+	memset(hw, 0, sizeof(*hw));
+	hw->device_id = dev->pci_dev->id.device_id;
+	hw->vendor_id = dev->pci_dev->id.vendor_id;
+	hw->subsystem_device_id = dev->pci_dev->id.subsystem_device_id;
+	hw->subsystem_vendor_id = dev->pci_dev->id.subsystem_vendor_id;
+	hw->revision_id = 0;
+	hw->hw_addr = (void *)dev->pci_dev->mem_resource[0].addr;
+	if (hw->hw_addr == NULL) {
+		PMD_LOG(ERR, "Bad mem resource."
+			" Try to blacklist unused devices.\n");
+		return -EIO;
+	}
+
+	/* Store fm10k_adapter pointer */
+	hw->back = dev->data->dev_private;
+
+	/* Initialize the shared code */
+	diag = fm10k_init_shared_code(hw);
+	if (diag != FM10K_SUCCESS) {
+		PMD_LOG(ERR, "Shared code init failed: %d", diag);
+		return -EIO;
+	}
+
+	/*
+	 * Inialize bus info. Normally we would call fm10k_get_bus_info(), but
+	 * there is no way to get link status without reading BAR4.  Until this
+	 * works, assume we have maximum bandwidth.
+	 * @todo - fix bus info
+	 */
+	hw->bus_caps.speed = fm10k_bus_speed_8000;
+	hw->bus_caps.width = fm10k_bus_width_pcie_x8;
+	hw->bus_caps.payload = fm10k_bus_payload_512;
+	hw->bus.speed = fm10k_bus_speed_8000;
+	hw->bus.width = fm10k_bus_width_pcie_x8;
+	hw->bus.payload = fm10k_bus_payload_256;
+
+	/* Initialize the hw */
+	diag = fm10k_init_hw(hw);
+	if (diag != FM10K_SUCCESS) {
+		PMD_LOG(ERR, "Hardware init failed: %d", diag);
+		return -EIO;
+	}
+
+	/* Initialize MAC address(es) */
+	dev->data->mac_addrs = rte_zmalloc("fm10k", ETHER_ADDR_LEN, 0);
+	if (dev->data->mac_addrs == NULL) {
+		PMD_LOG(ERR, "Cannot allocate memory for MAC addresses");
+		return -ENOMEM;
+	}
+
+	diag = fm10k_read_mac_addr(hw);
+	if (diag != FM10K_SUCCESS) {
+		/*
+		 * TODO: remove special handling on VF. Need shared code to
+		 * fix first.
+		 */
+		if (hw->mac.type == fm10k_mac_pf) {
+			PMD_LOG(ERR, "Read MAC addr failed: %d", diag);
+			return -EIO;
+		} else {
+			/* Generate a random addr */
+			eth_random_addr(hw->mac.addr);
+			memcpy(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN);
+		}
+	}
+
+	ether_addr_copy((const struct ether_addr *)hw->mac.addr,
+			&dev->data->mac_addrs[0]);
+
+	/* Reset the hw statistics */
+	fm10k_stats_reset(dev);
+
+	/* Reset the hw */
+	diag = fm10k_reset_hw(hw);
+	if (diag != FM10K_SUCCESS) {
+		PMD_LOG(ERR, "Hardware reset failed: %d", diag);
+		return -EIO;
+	}
+
+	/* Setup mailbox service */
+	diag = fm10k_setup_mbx_service(hw);
+	if (diag != FM10K_SUCCESS) {
+		PMD_LOG(ERR, "Failed to setup mailbox: %d", diag);
+		return -EIO;
+	}
+
+	/*
+	 * Below function will trigger operations on mailbox, acquire lock to
+	 * avoid race condition from interrupt handler. Operations on mailbox
+	 * FIFO will trigger interrupt to PF/SM, in which interrupt handler
+	 * will handle and generate an interrupt to our side. Then,  FIFO in
+	 * mailbox will be touched.
+	 */
+	fm10k_mbx_lock(hw);
+	/* Enable port first */
+	hw->mac.ops.update_lport_state(hw, 0, 0, 1);
+
+	/* Update default vlan */
+	hw->mac.ops.update_vlan(hw, hw->mac.default_vid, 0, true);
+
+	/*
+	 * Add default mac/vlan filter. glort is assigned by SM for PF, while is
+	 * unused for VF. PF will assign correct glort for VF.
+	 */
+	hw->mac.ops.update_uc_addr(hw, hw->mac.dglort_map, hw->mac.addr,
+			      hw->mac.default_vid, 1, 0);
+
+	/* Set unicast mode by default. App can change to other mode in other
+	 * API func.
+	 */
+	hw->mac.ops.update_xcast_mode(hw, hw->mac.dglort_map,
+					FM10K_XCAST_MODE_MULTI);
+
+	fm10k_mbx_unlock(hw);
+
+	return 0;
+}
+
+/*
+ * The set of PCI devices this driver supports. This driver will enable both PF
+ * and SRIOV-VF devices.
+ */
+static struct rte_pci_id pci_id_fm10k_map[] = {
+#define RTE_PCI_DEV_ID_DECL_FM10K(vend, dev) { RTE_PCI_DEVICE(vend, dev) },
+#include "rte_pci_dev_ids.h"
+	{ .vendor_id = 0, /* sentinel */ },
+};
+
+static struct eth_driver rte_pmd_fm10k = {
+	{
+		.name = "rte_pmd_fm10k",
+		.id_table = pci_id_fm10k_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+	},
+	.eth_dev_init = eth_fm10k_dev_init,
+	.dev_private_size = sizeof(struct fm10k_adapter),
+};
+
+/*
+ * Driver initialization routine.
+ * Invoked once at EAL init time.
+ * Register itself as the [Poll Mode] Driver of PCI FM10K devices.
+ */
+static int
+rte_pmd_fm10k_init(__rte_unused const char *name,
+	__rte_unused const char *params)
+{
+	PMD_FUNC_TRACE();
+	rte_eth_driver_register(&rte_pmd_fm10k);
+	return 0;
+}
+
+static struct rte_driver rte_fm10k_driver = {
+	.type = PMD_PDEV,
+	.init = rte_pmd_fm10k_init,
+};
+
+PMD_REGISTER_DRIVER(rte_fm10k_driver);
-- 
1.7.7.6

  parent reply	other threads:[~2015-01-30  5:08 UTC|newest]

Thread overview: 147+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-30  5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40   ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10  7:02       ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11  1:31           ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13  8:19               ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18                   ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-17 14:18                     ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18  0:13                     ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08                   ` David Marchand
2015-02-17 13:01                     ` Chen, Jing D
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31                   ` David Marchand
2015-02-13 16:45                     ` Jeff Shaw
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42                   ` David Marchand
2015-02-17 13:07                     ` Chen, Jing D
2015-02-13 11:53                   ` David Marchand
2015-02-17 13:10                     ` Chen, Jing D
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55                   ` David Marchand
2015-02-17 13:11                     ` Chen, Jing D
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42                   ` David Marchand
2015-02-17 13:12                     ` Chen, Jing D
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13  8:19                 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13  8:37                 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15  5:07                 ` Qiu, Michael
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-11 17:28               ` Jeff Shaw
2015-02-12  4:04                 ` Chen, Jing D
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32               ` Jeff Shaw
2015-02-12  4:04                 ` Chen, Jing D
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11  1:31             ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11  1:50             ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10  7:02         ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40     ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41     ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02   ` Neil Horman
2015-02-02  5:34     ` Chen, Jing D
     [not found]       ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03  6:47         ` Chen, Jing D
2015-02-01 13:01   ` David Marchand
2015-01-30  5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19   ` Neil Horman
2015-01-31 16:07     ` David Marchand
2015-01-31 16:32       ` Neil Horman
2015-01-31 16:55         ` David Marchand
2015-01-31 18:35           ` Neil Horman
2015-05-07 11:06             ` David Marchand
2015-05-07 13:36               ` Neil Horman
2015-05-07 13:39                 ` David Marchand
2015-02-02  7:54     ` Chen, Jing D
2015-01-30  5:07 ` Chen Jing D(Mark) [this message]
2015-01-30  5:07 ` [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04  2:36   ` Qiu, Michael
2015-02-04  9:55     ` Chen, Jing D
2015-01-30  5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01  0:38   ` Neil Horman
2015-01-30  5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01  0:42   ` Neil Horman
2015-02-02  7:59     ` Chen, Jing D
2015-01-30  5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30  5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01  0:50   ` Neil Horman
2015-02-02  8:10     ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46   ` Jeff Shaw
2015-01-30 22:19     ` Thomas Monjalon
2015-02-02  2:59       ` Chen, Jing D
2015-02-02  8:19         ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422594454-11045-6-git-send-email-jing.d.chen@intel.com \
    --to=jing.d.chen@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).