From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions
Date: Fri, 30 Jan 2015 13:07:22 +0800 [thread overview]
Message-ID: <1422594454-11045-7-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1422594454-11045-1-git-send-email-jing.d.chen@intel.com>
From: Jeff Shaw <jeffrey.b.shaw@intel.com>
1. Add fm10k_reta_update and fm10k_reta_query functions.
2. Add fm10k_link_update and fm10k_dev_infos_get functions.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
lib/librte_pmd_fm10k/fm10k_ethdev.c | 161 +++++++++++++++++++++++++++++++++++
1 files changed, 161 insertions(+), 0 deletions(-)
diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index 400d841..991d6ee 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -44,6 +44,10 @@
/* Default delay to acquire mailbox lock */
#define FM10K_MBXLOCK_DELAY_US 20
+/* Number of chars per uint32 type */
+#define CHARS_PER_UINT32 (sizeof(uint32_t))
+#define BIT_MASK_PER_UINT32 ((1 << CHARS_PER_UINT32) - 1)
+
static void
fm10k_mbx_initlock(struct fm10k_hw *hw)
{
@@ -74,6 +78,22 @@ fm10k_dev_configure(struct rte_eth_dev *dev)
return 0;
}
+static int
+fm10k_link_update(struct rte_eth_dev *dev,
+ __rte_unused int wait_to_complete)
+{
+ PMD_FUNC_TRACE();
+
+ /* The host-interface link is always up. The speed is ~50Gbps per Gen3
+ * x8 PCIe interface. For now, we leave the speed undefined since there
+ * is no 50Gbps Ethernet. */
+ dev->data->dev_link.link_speed = 0;
+ dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ dev->data->dev_link.link_status = 1;
+
+ return 0;
+}
+
static void
fm10k_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
{
@@ -117,6 +137,143 @@ fm10k_stats_reset(struct rte_eth_dev *dev)
fm10k_rebind_hw_stats(hw, hw_stats);
}
+static void
+fm10k_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ PMD_FUNC_TRACE();
+
+ dev_info->min_rx_bufsize = FM10K_MIN_RX_BUF_SIZE;
+ dev_info->max_rx_pktlen = FM10K_MAX_PKT_SIZE;
+ dev_info->max_rx_queues = hw->mac.max_queues;
+ dev_info->max_tx_queues = hw->mac.max_queues;
+ dev_info->max_mac_addrs = 1;
+ dev_info->max_hash_mac_addrs = 0;
+ dev_info->max_vfs = FM10K_MAX_VF_NUM;
+ dev_info->max_vmdq_pools = ETH_64_POOLS;
+ dev_info->rx_offload_capa =
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ dev_info->tx_offload_capa = 0;
+ dev_info->reta_size = FM10K_MAX_RSS_INDICES;
+
+ dev_info->default_rxconf = (struct rte_eth_rxconf) {
+ .rx_thresh = {
+ .pthresh = FM10K_DEFAULT_RX_PTHRESH,
+ .hthresh = FM10K_DEFAULT_RX_HTHRESH,
+ .wthresh = FM10K_DEFAULT_RX_WTHRESH,
+ },
+ .rx_free_thresh = FM10K_RX_FREE_THRESH_DEFAULT(0),
+ .rx_drop_en = 0,
+ };
+
+ dev_info->default_txconf = (struct rte_eth_txconf) {
+ .tx_thresh = {
+ .pthresh = FM10K_DEFAULT_TX_PTHRESH,
+ .hthresh = FM10K_DEFAULT_TX_HTHRESH,
+ .wthresh = FM10K_DEFAULT_TX_WTHRESH,
+ },
+ .tx_free_thresh = FM10K_TX_FREE_THRESH_DEFAULT(0),
+ .tx_rs_thresh = FM10K_TX_RS_THRESH_DEFAULT(0),
+ .txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS |
+ ETH_TXQ_FLAGS_NOOFFLOADS,
+ };
+
+}
+
+static int
+fm10k_reta_update(struct rte_eth_dev *dev,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint16_t i, j, idx, shift;
+ uint8_t mask;
+ uint32_t reta;
+
+ PMD_FUNC_TRACE();
+
+ if (reta_size > FM10K_MAX_RSS_INDICES) {
+ PMD_LOG(ERR, "The size of hash lookup table configured "
+ "(%d) doesn't match the number hardware can supported "
+ "(%d)\n", reta_size, FM10K_MAX_RSS_INDICES);
+ return -EINVAL;
+ }
+
+ /*
+ * Update Redirection Table RETA[n], n=0..31. The redirection table has
+ * 128-entries in 32 registers
+ */
+ for (i = 0; i < FM10K_MAX_RSS_INDICES; i += CHARS_PER_UINT32) {
+ idx = i / RTE_RETA_GROUP_SIZE;
+ shift = i % RTE_RETA_GROUP_SIZE;
+ mask = (uint8_t)((reta_conf[idx].mask >> shift) &
+ BIT_MASK_PER_UINT32);
+ if (mask == 0)
+ continue;
+
+ reta = 0;
+ if (mask != BIT_MASK_PER_UINT32)
+ reta = FM10K_READ_REG(hw, FM10K_RETA(0, i >> 2));
+
+ for (j = 0; j < CHARS_PER_UINT32; j++) {
+ if (mask & (0x1 << j)) {
+ if (mask != 0xF)
+ reta &= ~(UINT8_MAX << CHAR_BIT * j);
+ reta |= reta_conf[idx].reta[shift + j] <<
+ (CHAR_BIT * j);
+ }
+ }
+ FM10K_WRITE_REG(hw, FM10K_RETA(0, i >> 2), reta);
+ }
+
+ return 0;
+}
+
+static int
+fm10k_reta_query(struct rte_eth_dev *dev,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint16_t i, j, idx, shift;
+ uint8_t mask;
+ uint32_t reta;
+
+ PMD_FUNC_TRACE();
+
+ if (reta_size < FM10K_MAX_RSS_INDICES) {
+ PMD_LOG(ERR, "The size of hash lookup table configured "
+ "(%d) doesn't match the number hardware can supported "
+ "(%d)\n", reta_size, FM10K_MAX_RSS_INDICES);
+ return -EINVAL;
+ }
+
+ /*
+ * Read Redirection Table RETA[n], n=0..31. The redirection table has
+ * 128-entries in 32 registers
+ */
+ for (i = 0; i < FM10K_MAX_RSS_INDICES; i += CHARS_PER_UINT32) {
+ idx = i / RTE_RETA_GROUP_SIZE;
+ shift = i % RTE_RETA_GROUP_SIZE;
+ mask = (uint8_t)((reta_conf[idx].mask >> shift) &
+ BIT_MASK_PER_UINT32);
+ if (mask == 0)
+ continue;
+
+ reta = FM10K_READ_REG(hw, FM10K_RETA(0, i >> 2));
+ for (j = 0; j < CHARS_PER_UINT32; j++) {
+ if (mask & (0x1 << j))
+ reta_conf[idx].reta[shift + j] = ((reta >>
+ CHAR_BIT * j) & UINT8_MAX);
+ }
+ }
+
+ return 0;
+}
+
/* Mailbox message handler in VF */
static const struct fm10k_msg_data fm10k_msgdata_vf[] = {
FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
@@ -160,8 +317,12 @@ fm10k_setup_mbx_service(struct fm10k_hw *hw)
static struct eth_dev_ops fm10k_eth_dev_ops = {
.dev_configure = fm10k_dev_configure,
+ .link_update = fm10k_link_update,
.stats_get = fm10k_stats_get,
.stats_reset = fm10k_stats_reset,
+ .dev_infos_get = fm10k_dev_infos_get,
+ .reta_update = fm10k_reta_update,
+ .reta_query = fm10k_reta_query,
};
static int
--
1.7.7.6
next prev parent reply other threads:[~2015-01-30 5:08 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18 0:13 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08 ` David Marchand
2015-02-17 13:01 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31 ` David Marchand
2015-02-13 16:45 ` Jeff Shaw
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:07 ` Chen, Jing D
2015-02-13 11:53 ` David Marchand
2015-02-17 13:10 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55 ` David Marchand
2015-02-17 13:11 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:12 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13 8:37 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15 5:07 ` Qiu, Michael
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-11 17:28 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11 1:50 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41 ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02 ` Neil Horman
2015-02-02 5:34 ` Chen, Jing D
[not found] ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03 6:47 ` Chen, Jing D
2015-02-01 13:01 ` David Marchand
2015-01-30 5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19 ` Neil Horman
2015-01-31 16:07 ` David Marchand
2015-01-31 16:32 ` Neil Horman
2015-01-31 16:55 ` David Marchand
2015-01-31 18:35 ` Neil Horman
2015-05-07 11:06 ` David Marchand
2015-05-07 13:36 ` Neil Horman
2015-05-07 13:39 ` David Marchand
2015-02-02 7:54 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver Chen Jing D(Mark)
2015-01-30 5:07 ` Chen Jing D(Mark) [this message]
2015-01-30 5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 2:36 ` Qiu, Michael
2015-02-04 9:55 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01 0:38 ` Neil Horman
2015-01-30 5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01 0:42 ` Neil Horman
2015-02-02 7:59 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01 0:50 ` Neil Horman
2015-02-02 8:10 ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46 ` Jeff Shaw
2015-01-30 22:19 ` Thomas Monjalon
2015-02-02 2:59 ` Chen, Jing D
2015-02-02 8:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422594454-11045-7-git-send-email-jing.d.chen@intel.com \
--to=jing.d.chen@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).