From: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 4/4] bond: added example application for link bonding mode 6.
Date: Fri, 30 Jan 2015 11:57:44 +0100 [thread overview]
Message-ID: <1422615464-4432-5-git-send-email-michalx.k.jastrzebski@intel.com> (raw)
In-Reply-To: <1422615464-4432-1-git-send-email-michalx.k.jastrzebski@intel.com>
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
---
examples/bond/Makefile | 57 ++++
examples/bond/main.c | 790 ++++++++++++++++++++++++++++++++++++++++++++++++
examples/bond/main.h | 46 +++
3 files changed, 893 insertions(+)
create mode 100644 examples/bond/Makefile
create mode 100644 examples/bond/main.c
create mode 100644 examples/bond/main.h
diff --git a/examples/bond/Makefile b/examples/bond/Makefile
new file mode 100644
index 0000000..9262249
--- /dev/null
+++ b/examples/bond/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = bond_app
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+CFLAGS += -O3
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/bond/main.c b/examples/bond/main.c
new file mode 100644
index 0000000..57cc672
--- /dev/null
+++ b/examples/bond/main.c
@@ -0,0 +1,790 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <sys/queue.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <getopt.h>
+#include <termios.h>
+#include <unistd.h>
+#include <pthread.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_log.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+#include <rte_ip.h>
+#include <rte_tcp.h>
+#include <rte_arp.h>
+#include <rte_spinlock.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_ipaddr.h>
+#include <cmdline_parse_etheraddr.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+
+#include "main.h"
+
+#include <rte_devargs.h>
+
+
+#include "rte_byteorder.h"
+#include "rte_cpuflags.h"
+#include "rte_eth_bond.h"
+
+#define RTE_LOGTYPE_DCB RTE_LOGTYPE_USER1
+
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define NB_MBUF (1024*8)
+
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+#define BURST_RX_INTERVAL_NS (10) /* RX poll interval ~100ns */
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
+#define RX_FTHRESH (MAX_PKT_BURST * 2)/**< Default values of RX free threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
+#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_RX_DESC_DEFAULT 128
+#define RTE_TX_DESC_DEFAULT 512
+
+#define BOND_IP_1 7
+#define BOND_IP_2 0
+#define BOND_IP_3 0
+#define BOND_IP_4 10
+
+/* not defined under linux */
+#ifndef NIPQUAD
+#define NIPQUAD_FMT "%u.%u.%u.%u"
+#define NIPQUAD(addr) \
+ (unsigned)((unsigned char *)&addr)[0], \
+ (unsigned)((unsigned char *)&addr)[1], \
+ (unsigned)((unsigned char *)&addr)[2], \
+ (unsigned)((unsigned char *)&addr)[3]
+#endif
+
+#define MAX_PORTS 4
+#define PRINT_MAC(addr) printf("%02"PRIx8":%02"PRIx8":%02"PRIx8 \
+ ":%02"PRIx8":%02"PRIx8":%02"PRIx8, \
+ addr.addr_bytes[0], addr.addr_bytes[1], addr.addr_bytes[2], \
+ addr.addr_bytes[3], addr.addr_bytes[4], addr.addr_bytes[5])
+
+uint8_t slaves[RTE_MAX_ETHPORTS];
+uint8_t slaves_count;
+
+static uint8_t BOND_PORT = 0xff;
+
+static struct rte_mempool *mbuf_pool;
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+/* Default configuration for rx and tx thresholds etc. */
+static const struct rte_eth_rxconf rx_conf_default = {
+ .rx_thresh = {
+ .pthresh = RX_PTHRESH,
+ .hthresh = RX_HTHRESH,
+ .wthresh = RX_WTHRESH,
+
+ },
+ .rx_free_thresh = RX_FTHRESH,
+};
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+static const struct rte_eth_txconf tx_conf_default = {
+ .tx_thresh = {
+ .pthresh = TX_PTHRESH,
+ .hthresh = TX_HTHRESH,
+ .wthresh = TX_WTHRESH,
+ },
+ .tx_free_thresh = 0, /* Use PMD default values */
+ .tx_rs_thresh = 0, /* Use PMD default values */
+ .txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS,
+};
+
+static struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_NONE,
+ .max_rx_pkt_len = ETHER_MAX_LEN,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload enabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+ .rx_adv_conf = {
+ .rss_conf = {
+ .rss_key = NULL,
+ .rss_hf = ETH_RSS_IP,
+ },
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+};
+
+static void
+slave_port_init(uint8_t portid, struct rte_mempool *mbuf_pool)
+{
+ int retval;
+
+ if (portid >= rte_eth_dev_count())
+ rte_exit(EXIT_FAILURE, "Invalid port\n");
+
+ retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+ if (retval != 0)
+ rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n", \
+ portid, retval);
+
+ /* RX setup */
+ retval = rte_eth_rx_queue_setup(portid, 0, RTE_RX_DESC_DEFAULT,
+ rte_eth_dev_socket_id(portid), &rx_conf_default,
+ mbuf_pool);
+ if (retval < 0)
+ rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)", \
+ portid, retval);
+
+ /* TX setup */
+ retval = rte_eth_tx_queue_setup(portid, 0, RTE_TX_DESC_DEFAULT,
+ rte_eth_dev_socket_id(portid), &tx_conf_default);
+
+ if (retval < 0)
+ rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)", \
+ portid, retval);
+
+ retval = rte_eth_dev_start(portid);
+ if (retval < 0)
+ rte_exit(retval, \
+ "Start port %d failed (res=%d)", \
+ portid, retval);
+
+ struct ether_addr addr;
+ rte_eth_macaddr_get(portid, &addr);
+ printf("Port %u MAC: ", (unsigned)portid);
+ PRINT_MAC(addr);
+ printf("\n");
+}
+
+static void
+bond_port_init(struct rte_mempool *mbuf_pool)
+{
+ int retval;
+ uint8_t i;
+
+ retval = rte_eth_bond_create("bond0", BONDING_MODE_ALB, 0 /*SOCKET_ID_ANY*/);
+ if (retval < 0)
+ rte_exit(EXIT_FAILURE, \
+ "Faled to create bond port\n");
+
+ BOND_PORT = (uint8_t)retval;
+
+ retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &port_conf);
+ if (retval != 0)
+ rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n", \
+ BOND_PORT, retval);
+
+ /* RX setup */
+ retval = rte_eth_rx_queue_setup(BOND_PORT, 0, RTE_RX_DESC_DEFAULT,
+ rte_eth_dev_socket_id(BOND_PORT), &rx_conf_default,
+ mbuf_pool);
+ if (retval < 0)
+ rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)", \
+ BOND_PORT, retval);
+
+ /* TX setup */
+ retval = rte_eth_tx_queue_setup(BOND_PORT, 0, RTE_TX_DESC_DEFAULT,
+ rte_eth_dev_socket_id(BOND_PORT), &tx_conf_default);
+
+ if (retval < 0)
+ rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)", \
+ BOND_PORT, retval);
+
+ for (i = 0; i < slaves_count; i++) {
+ if (rte_eth_bond_slave_add(BOND_PORT, slaves[i]) == -1)
+ rte_exit(-1, "Oooops! adding slave (%u) to bond (%u) failed!\n", \
+ slaves[i], BOND_PORT);
+
+ }
+
+ retval = rte_eth_dev_start(BOND_PORT);
+ if (retval < 0)
+ rte_exit(retval, "Start port %d failed (res=%d)", BOND_PORT, retval);
+
+ rte_eth_promiscuous_enable(BOND_PORT);
+
+ struct ether_addr addr;
+ rte_eth_macaddr_get(BOND_PORT, &addr);
+ printf("Port %u MAC: ", (unsigned)BOND_PORT);
+ PRINT_MAC(addr);
+ printf("\n");
+}
+
+struct global_flag_stru_t {
+ int LcoreMainIsRunning;
+ int LcoreMainCore;
+ uint32_t port_packets[4];
+ rte_spinlock_t lock;
+};
+struct global_flag_stru_t global_flag_stru;
+struct global_flag_stru_t *global_flag_stru_p = &global_flag_stru;
+
+/*
+ * Main thread that does the work, reading from INPUT_PORT
+ * and writing to OUTPUT_PORT
+ */
+static int lcore_main(__attribute__((unused)) void *arg1)
+{
+ struct rte_mbuf *pkts[MAX_PKT_BURST] __rte_cache_aligned;
+ struct ether_addr d_addr;
+
+ struct ether_hdr *eth_hdr;
+ struct arp_hdr *arp_hdr;
+
+ uint16_t rx_cnt;
+ uint32_t bond_ip;
+ int i = 0;
+ uint8_t is_free;
+
+ bond_ip = BOND_IP_1 | (BOND_IP_2 << 8) |
+ (BOND_IP_3 << 16) | (BOND_IP_4 << 24);
+
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+
+ while (global_flag_stru_p->LcoreMainIsRunning) {
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ rx_cnt = rte_eth_rx_burst(BOND_PORT, 0, pkts, MAX_PKT_BURST);
+ is_free = 0;
+
+ /* If didn't receive any packets, wait and go to next iteration */
+ if (rx_cnt == 0) {
+ rte_delay_us(50);
+ continue;
+ }
+
+ /* Search incoming data for ARP packets and prepare response */
+ for (i = 0; i < rx_cnt; i++) {
+ if (rte_spinlock_trylock(&global_flag_stru_p->lock) == 1) {
+ global_flag_stru_p->port_packets[0]++;
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ }
+ eth_hdr = rte_pktmbuf_mtod(pkts[i], struct ether_hdr *);
+ if (eth_hdr->ether_type == rte_cpu_to_be_16(ETHER_TYPE_ARP)) {
+ if (rte_spinlock_trylock(&global_flag_stru_p->lock) == 1) {
+ global_flag_stru_p->port_packets[1]++;
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ }
+ arp_hdr = (struct arp_hdr *)((char *)eth_hdr + sizeof(struct ether_hdr));
+ if (arp_hdr->arp_data.arp_tip == bond_ip) {
+ if (arp_hdr->arp_op == rte_cpu_to_be_16(ARP_OP_REQUEST)) {
+ arp_hdr->arp_op = rte_cpu_to_be_16(ARP_OP_REPLY);
+
+ /* Switch src and dst data and set bonding MAC */
+ ether_addr_copy(ð_hdr->s_addr, ð_hdr->d_addr);
+ rte_eth_macaddr_get(BOND_PORT, ð_hdr->s_addr);
+ ether_addr_copy(&arp_hdr->arp_data.arp_sha, &arp_hdr->arp_data.arp_tha);
+ arp_hdr->arp_data.arp_tip = arp_hdr->arp_data.arp_sip;
+ rte_eth_macaddr_get(BOND_PORT, &d_addr);
+ ether_addr_copy(&d_addr, &arp_hdr->arp_data.arp_sha);
+ arp_hdr->arp_data.arp_sip = bond_ip;
+ rte_eth_tx_burst(BOND_PORT, 0, &pkts[i], 1);
+ is_free = 1;
+ } else {
+ rte_eth_tx_burst(BOND_PORT, 0, NULL, 0);
+ }
+ }
+ }
+
+ /* Free processed packets */
+ if (is_free == 0)
+ rte_pktmbuf_free(pkts[i]);
+ }
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+ }
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ printf("BYE lcore_main\n");
+ return 0;
+}
+
+/**********************************************************/
+/**********************************************************/
+struct cmd_obj_send_result {
+ cmdline_fixed_string_t action;
+ uint32_t count;
+ cmdline_ipaddr_t ip;
+};
+
+static void cmd_obj_send_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+
+ struct cmd_obj_send_result *res = parsed_result;
+ char ip_str[INET6_ADDRSTRLEN];
+
+ struct rte_mbuf *created_pkt;
+ struct ether_hdr *eth_hdr;
+ struct arp_hdr *arp_hdr;
+
+ uint32_t bond_ip;
+ size_t pkt_size;
+
+ if (res->ip.family == AF_INET)
+ snprintf(ip_str, sizeof(ip_str), NIPQUAD_FMT,
+ NIPQUAD(res->ip.addr.ipv4));
+ else
+ cmdline_printf(cl, "Wrong IP format. Only IPv4 is supported\n");
+
+ bond_ip = BOND_IP_1 | (BOND_IP_2 << 8) |
+ (BOND_IP_3 << 16) | (BOND_IP_4 << 24);
+
+ created_pkt = rte_pktmbuf_alloc(mbuf_pool);
+ while (created_pkt == NULL);
+
+ pkt_size = sizeof(struct ether_hdr) + sizeof(struct arp_hdr);
+ created_pkt->data_len = pkt_size;
+ created_pkt->pkt_len = pkt_size;
+
+ eth_hdr = rte_pktmbuf_mtod(created_pkt, struct ether_hdr *);
+ rte_eth_macaddr_get(BOND_PORT, ð_hdr->s_addr);
+ memset(ð_hdr->d_addr, 0xFF, ETHER_ADDR_LEN);
+ eth_hdr->ether_type = rte_cpu_to_be_16(ETHER_TYPE_ARP);
+
+ arp_hdr = (struct arp_hdr *)((char *)eth_hdr + sizeof(struct ether_hdr));
+ arp_hdr->arp_hrd = rte_cpu_to_be_16(ARP_HRD_ETHER);
+ arp_hdr->arp_pro = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
+ arp_hdr->arp_hln = ETHER_ADDR_LEN;
+ arp_hdr->arp_pln = sizeof(uint32_t);
+ arp_hdr->arp_op = rte_cpu_to_be_16(ARP_OP_REQUEST);
+
+ rte_eth_macaddr_get(BOND_PORT, &arp_hdr->arp_data.arp_sha);
+ arp_hdr->arp_data.arp_sip = bond_ip;
+ memset(&arp_hdr->arp_data.arp_tha, 0, ETHER_ADDR_LEN);
+ arp_hdr->arp_data.arp_tip =
+ ((unsigned char *)&res->ip.addr.ipv4)[0] |
+ (((unsigned char *)&res->ip.addr.ipv4)[1] << 8) |
+ (((unsigned char *)&res->ip.addr.ipv4)[2] << 16) |
+ (((unsigned char *)&res->ip.addr.ipv4)[3] << 24);
+ rte_eth_tx_burst(BOND_PORT, 0, &created_pkt, 1);
+
+ rte_delay_ms(500);
+ cmdline_printf(cl, "\n");
+}
+
+cmdline_parse_token_string_t cmd_obj_action_send =
+ TOKEN_STRING_INITIALIZER(struct cmd_obj_send_result, action, "send");
+cmdline_parse_token_num_t cmd_obj_count =
+ TOKEN_NUM_INITIALIZER(struct cmd_obj_send_result, count, UINT32);
+cmdline_parse_token_ipaddr_t cmd_obj_ip =
+ TOKEN_IPADDR_INITIALIZER(struct cmd_obj_send_result, ip);
+
+cmdline_parse_inst_t cmd_obj_send = {
+ .f = cmd_obj_send_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "send arp",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_obj_action_send,
+ (void *)&cmd_obj_count,
+ (void *)&cmd_obj_ip,
+ NULL,
+ },
+};
+
+/**********************************************************/
+
+
+/**********************************************************/
+struct cmd_start_result {
+ cmdline_fixed_string_t start;
+};
+
+static void cmd_start_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int slave_core_id = rte_lcore_id();
+
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+ if (global_flag_stru_p->LcoreMainIsRunning == 0) {
+ if (lcore_config[global_flag_stru_p->LcoreMainCore].state != WAIT) {
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ return;
+ }
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ } else {
+ cmdline_printf(cl, "lcore_main already running on core:%d\n",
+ global_flag_stru_p->LcoreMainCore);
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ return;
+ }
+
+ /* start lcore main on core != master_core - ARP response thread */
+ slave_core_id = rte_get_next_lcore(rte_lcore_id(), 1, 0);
+ if ((slave_core_id >= RTE_MAX_LCORE) || (slave_core_id == 0))
+ return;
+
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+ global_flag_stru_p->LcoreMainIsRunning = 1;
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ cmdline_printf(cl, "Starting lcore_main on core %d:%d "
+ "Our IP:%d.%d.%d.%d\n",
+ slave_core_id,
+ rte_eal_remote_launch(lcore_main, NULL, slave_core_id),
+ BOND_IP_1,
+ BOND_IP_2,
+ BOND_IP_3,
+ BOND_IP_4
+ );
+}
+
+cmdline_parse_token_string_t cmd_start_start =
+ TOKEN_STRING_INITIALIZER(struct cmd_start_result, start, "start");
+
+cmdline_parse_inst_t cmd_start = {
+ .f = cmd_start_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "starts listening if not started at startup",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_start_start,
+ NULL,
+ },
+};
+
+/**********************************************************/
+
+struct cmd_help_result {
+ cmdline_fixed_string_t help;
+};
+
+static void cmd_help_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ cmdline_printf(cl,
+ "ALB - link bonding mode 6 example\n"
+ "send COUNT IP - sends COUNT ARPrequests thru bonding for IP.\n"
+ "start - starts listening ARPs.\n"
+ "stop - stops lcore_main.\n"
+ "show - shows some bond info: ex. active slaves etc.\n"
+ "help - prints help.\n"
+ "quit - terminate all threads and quit.\n"
+ );
+}
+
+cmdline_parse_token_string_t cmd_help_help =
+ TOKEN_STRING_INITIALIZER(struct cmd_help_result, help, "help");
+
+cmdline_parse_inst_t cmd_help = {
+ .f = cmd_help_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "show help",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_help_help,
+ NULL,
+ },
+};
+
+/**********************************************************/
+struct cmd_stop_result {
+ cmdline_fixed_string_t stop;
+};
+
+static void cmd_stop_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+ if (global_flag_stru_p->LcoreMainIsRunning == 0) {
+ cmdline_printf(cl,
+ "lcore_main not running on core:%d\n",
+ global_flag_stru_p->LcoreMainCore);
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+ return;
+ }
+ global_flag_stru_p->LcoreMainIsRunning = 0;
+ rte_eal_wait_lcore(global_flag_stru_p->LcoreMainCore);
+ cmdline_printf(cl,
+ "lcore_main stopped on core:%d\n",
+ global_flag_stru_p->LcoreMainCore);
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+}
+
+cmdline_parse_token_string_t cmd_stop_stop =
+ TOKEN_STRING_INITIALIZER(struct cmd_stop_result, stop, "stop");
+
+cmdline_parse_inst_t cmd_stop = {
+ .f = cmd_stop_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "this command do not handle any arguments",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_stop_stop,
+ NULL,
+ },
+};
+/**********************************************************/
+
+/**********************************************************/
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ cmdline_printf(cl,
+ "quit - for quit just do ctrl+d\n"
+ );
+ exit(EXIT_SUCCESS);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "this command do not handle any arguments",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+/**********************************************************/
+
+/**********************************************************/
+struct cmd_show_result {
+ cmdline_fixed_string_t show;
+};
+
+static void cmd_show_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ uint8_t slaves[16] = {0};
+ uint8_t len = 16;
+ struct ether_addr addr;
+ uint8_t i = 0;
+
+ while (i < slaves_count) {
+ rte_eth_macaddr_get(i, &addr);
+ PRINT_MAC(addr);
+ if (i == BOND_PORT)
+ printf(" - current primary slave");
+ printf("\n");
+ i++;
+ }
+ rte_eth_macaddr_get(i, &addr);
+ PRINT_MAC(addr);
+ if (i == BOND_PORT)
+ printf(" - current primary slave");
+ printf("\n");
+ rte_spinlock_trylock(&global_flag_stru_p->lock);
+ cmdline_printf(cl,
+ "Active_slaves:%d "
+ "packets received:Tot:%d Arp:%d\n",
+ rte_eth_bond_active_slaves_get(BOND_PORT, slaves, len),
+ global_flag_stru_p->port_packets[0],
+ global_flag_stru_p->port_packets[1]);
+ rte_spinlock_unlock(&global_flag_stru_p->lock);
+}
+
+cmdline_parse_token_string_t cmd_show_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_result, show, "show");
+
+cmdline_parse_inst_t cmd_show = {
+ .f = cmd_show_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "this command do not handle any arguments",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_show_show,
+ NULL,
+ },
+};
+/**********************************************************/
+
+/**********************************************************/
+/****** CONTEXT (list of instruction) */
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_start,
+ (cmdline_parse_inst_t *)&cmd_obj_send,
+ (cmdline_parse_inst_t *)&cmd_stop,
+ (cmdline_parse_inst_t *)&cmd_show,
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_help,
+ NULL,
+};
+
+/* prompt function, called from main on MASTER lcore */
+static void *prompt(__attribute__((unused)) void *arg1)
+{
+ struct cmdline *cl;
+
+ cl = cmdline_stdin_new(main_ctx, "bond6>");
+ if (cl != NULL) {
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+ }
+}
+
+/* Main function, does initialisation and calls the per-lcore functions */
+int
+MAIN(int argc, char *argv[])
+{
+ int ret;
+ uint8_t nb_ports, i;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ rte_eal_devargs_dump(stdout);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports == 0)
+ rte_exit(EXIT_FAILURE, "Give at least one port\n");
+ else if (nb_ports > MAX_PORTS)
+ rte_exit(EXIT_FAILURE, "You can have max 4 ports\n");
+
+ mbuf_pool = rte_mempool_create("MBUF_POOL", NB_MBUF,
+ MBUF_SIZE, 32,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ /* initialize all ports */
+ slaves_count = nb_ports;
+ for (i = 0; i < nb_ports; i++) {
+ slave_port_init(i, mbuf_pool);
+ slaves[i] = i;
+ }
+
+ bond_port_init(mbuf_pool);
+
+ rte_spinlock_init(&global_flag_stru_p->lock);
+ int slave_core_id = rte_lcore_id();
+
+ /* check state of lcores */
+ RTE_LCORE_FOREACH_SLAVE(slave_core_id) {
+ if (lcore_config[slave_core_id].state != WAIT)
+ return -EBUSY;
+ }
+ /* start lcore main on core != master_core - ARP response thread */
+ slave_core_id = rte_get_next_lcore(rte_lcore_id(), 1, 0);
+ if ((slave_core_id >= RTE_MAX_LCORE) || (slave_core_id == 0))
+ return -EPERM;
+
+ global_flag_stru_p->LcoreMainIsRunning = 1;
+ global_flag_stru_p->LcoreMainCore = slave_core_id;
+ printf("Starting lcore_main on core %d:%d Our IP:%d.%d.%d.%d\n",
+ slave_core_id,
+ rte_eal_remote_launch((lcore_function_t *)lcore_main,
+ NULL,
+ slave_core_id),
+ BOND_IP_1,
+ BOND_IP_2,
+ BOND_IP_3,
+ BOND_IP_4
+ );
+
+ /* Start prompt for user interact */
+ prompt(NULL);
+
+
+ return 0;
+}
diff --git a/examples/bond/main.h b/examples/bond/main.h
new file mode 100644
index 0000000..2682d15
--- /dev/null
+++ b/examples/bond/main.h
@@ -0,0 +1,46 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char *argv[]);
+
+#endif /* ifndef _MAIN_H_ */
--
1.7.9.5
next prev parent reply other threads:[~2015-01-30 11:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 10:57 [dpdk-dev] [PATCH 0/4] Link Bonding mode 6 support (ALB) Michal Jastrzebski
2015-01-30 10:57 ` [dpdk-dev] [PATCH 1/4] net: changed arp_hdr struct declaration Michal Jastrzebski
2015-01-30 10:57 ` [dpdk-dev] [PATCH 2/4] bond: added link bonding mode 6 implementation Michal Jastrzebski
2015-01-30 10:57 ` [dpdk-dev] [PATCH 3/4] bond: add debug info for mode 6 link bonding Michal Jastrzebski
2015-01-30 11:09 ` Jastrzebski, MichalX K
2015-01-30 10:57 ` Michal Jastrzebski [this message]
2015-01-30 11:27 ` [dpdk-dev] [PATCH 4/4] bond: added example application for link bonding mode 6 Jastrzebski, MichalX K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422615464-4432-5-git-send-email-michalx.k.jastrzebski@intel.com \
--to=michalx.k.jastrzebski@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).