From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function
Date: Wed, 11 Feb 2015 09:31:33 +0800 [thread overview]
Message-ID: <1423618298-2933-11-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1423618298-2933-1-git-send-email-jing.d.chen@intel.com>
From: Jeff Shaw <jeffrey.b.shaw@intel.com>
1. Add fm10k_recv_pkts and fm10k_xmit_pkts functions.
2. Link app function pointer to actual fm10k recv/xmit
functions.
3. Change Makefile to compile new file fm10k_rxtx.c
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
lib/librte_pmd_fm10k/Makefile | 1 +
lib/librte_pmd_fm10k/fm10k.h | 7 +
lib/librte_pmd_fm10k/fm10k_ethdev.c | 2 +
lib/librte_pmd_fm10k/fm10k_rxtx.c | 299 +++++++++++++++++++++++++++++++++++
4 files changed, 309 insertions(+), 0 deletions(-)
create mode 100644 lib/librte_pmd_fm10k/fm10k_rxtx.c
diff --git a/lib/librte_pmd_fm10k/Makefile b/lib/librte_pmd_fm10k/Makefile
index 1da84e9..8ab788c 100644
--- a/lib/librte_pmd_fm10k/Makefile
+++ b/lib/librte_pmd_fm10k/Makefile
@@ -79,6 +79,7 @@ VPATH += $(RTE_SDK)/lib/librte_pmd_fm10k/base
# all source are stored in SRCS-y
#
SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_pf.c
SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_tlv.c
diff --git a/lib/librte_pmd_fm10k/fm10k.h b/lib/librte_pmd_fm10k/fm10k.h
index be990e5..a9b19cd 100644
--- a/lib/librte_pmd_fm10k/fm10k.h
+++ b/lib/librte_pmd_fm10k/fm10k.h
@@ -280,4 +280,11 @@ fm10k_addr_alignment_valid(struct rte_mbuf *mb)
return 0;
}
+
+/* Rx and Tx prototypes */
+uint16_t fm10k_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+
+uint16_t fm10k_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
#endif
diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index 011b0bc..af68ad7 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -1245,6 +1245,8 @@ eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
PMD_INIT_FUNC_TRACE();
dev->dev_ops = &fm10k_eth_dev_ops;
+ dev->rx_pkt_burst = &fm10k_recv_pkts;
+ dev->tx_pkt_burst = &fm10k_xmit_pkts;
/* only initialize in the primary process */
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
diff --git a/lib/librte_pmd_fm10k/fm10k_rxtx.c b/lib/librte_pmd_fm10k/fm10k_rxtx.c
new file mode 100644
index 0000000..1d95bff
--- /dev/null
+++ b/lib/librte_pmd_fm10k/fm10k_rxtx.c
@@ -0,0 +1,299 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_ethdev.h>
+#include <rte_common.h>
+#include "fm10k.h"
+#include "base/fm10k_type.h"
+
+#ifdef RTE_PMD_PACKET_PREFETCH
+#define rte_packet_prefetch(p) rte_prefetch1(p)
+#else
+#define rte_packet_prefetch(p) do {} while (0)
+#endif
+
+static inline void dump_rxd(union fm10k_rx_desc *rxd)
+{
+#ifndef RTE_LIBRTE_FM10K_DEBUG_RX
+ RTE_SET_USED(rxd);
+#endif
+ PMD_RX_LOG(DEBUG, "+----------------|----------------+");
+ PMD_RX_LOG(DEBUG, "| GLORT | PKT HDR & TYPE |");
+ PMD_RX_LOG(DEBUG, "| 0x%08x | 0x%08x |", rxd->d.glort,
+ rxd->d.data);
+ PMD_RX_LOG(DEBUG, "+----------------|----------------+");
+ PMD_RX_LOG(DEBUG, "| VLAN & LEN | STATUS |");
+ PMD_RX_LOG(DEBUG, "| 0x%08x | 0x%08x |", rxd->d.vlan_len,
+ rxd->d.staterr);
+ PMD_RX_LOG(DEBUG, "+----------------|----------------+");
+ PMD_RX_LOG(DEBUG, "| RESERVED | RSS_HASH |");
+ PMD_RX_LOG(DEBUG, "| 0x%08x | 0x%08x |", 0, rxd->d.rss);
+ PMD_RX_LOG(DEBUG, "+----------------|----------------+");
+ PMD_RX_LOG(DEBUG, "| TIME TAG |");
+ PMD_RX_LOG(DEBUG, "| 0x%016lx |", rxd->q.timestamp);
+ PMD_RX_LOG(DEBUG, "+----------------|----------------+");
+}
+
+static inline void
+rx_desc_to_ol_flags(struct rte_mbuf *m, const union fm10k_rx_desc *d)
+{
+ uint16_t ptype;
+ static const uint16_t pt_lut[] = { 0,
+ PKT_RX_IPV4_HDR, PKT_RX_IPV4_HDR_EXT,
+ PKT_RX_IPV6_HDR, PKT_RX_IPV6_HDR_EXT,
+ 0, 0, 0
+ };
+
+ if (d->w.pkt_info & FM10K_RXD_RSSTYPE_MASK)
+ m->ol_flags |= PKT_RX_RSS_HASH;
+
+ if ((d->d.staterr & (FM10K_RXD_STATUS_IPCS | FM10K_RXD_STATUS_IPE)) ==
+ (FM10K_RXD_STATUS_IPCS | FM10K_RXD_STATUS_IPE))
+ m->ol_flags |= PKT_RX_IP_CKSUM_BAD;
+
+ if ((d->d.staterr & (FM10K_RXD_STATUS_L4CS | FM10K_RXD_STATUS_L4E)) ==
+ (FM10K_RXD_STATUS_L4CS | FM10K_RXD_STATUS_L4E))
+ m->ol_flags |= PKT_RX_L4_CKSUM_BAD;
+
+ if (d->d.staterr & FM10K_RXD_STATUS_VEXT)
+ m->ol_flags |= PKT_RX_VLAN_PKT;
+
+ if (d->d.staterr & FM10K_RXD_STATUS_HBO)
+ m->ol_flags |= PKT_RX_HBUF_OVERFLOW;
+
+ if (d->d.staterr & FM10K_RXD_STATUS_RXE)
+ m->ol_flags |= PKT_RX_RECIP_ERR;
+
+ ptype = (d->d.data & FM10K_RXD_PKTTYPE_MASK_L3) >>
+ FM10K_RXD_PKTTYPE_SHIFT;
+ m->ol_flags |= pt_lut[(uint8_t)ptype];
+}
+
+uint16_t
+fm10k_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct rte_mbuf *mbuf;
+ union fm10k_rx_desc desc;
+ struct fm10k_rx_queue *q = rx_queue;
+ uint16_t count = 0;
+ int alloc = 0;
+ uint16_t next_dd;
+
+ next_dd = q->next_dd;
+
+ nb_pkts = RTE_MIN(nb_pkts, q->alloc_thresh);
+ for (count = 0; count < nb_pkts; ++count) {
+ mbuf = q->sw_ring[next_dd];
+ desc = q->hw_ring[next_dd];
+ if (!(desc.d.staterr & FM10K_RXD_STATUS_DD))
+ break;
+#ifdef RTE_LIBRTE_FM10K_DEBUG_RX
+ dump_rxd(&desc);
+#endif
+ rte_pktmbuf_pkt_len(mbuf) = desc.w.length;
+ rte_pktmbuf_data_len(mbuf) = desc.w.length;
+
+ mbuf->ol_flags = 0;
+#ifdef RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE
+ rx_desc_to_ol_flags(mbuf, &desc);
+#endif
+
+ mbuf->hash.rss = desc.d.rss;
+
+ rx_pkts[count] = mbuf;
+ if (++next_dd == q->nb_desc) {
+ next_dd = 0;
+ alloc = 1;
+ }
+
+ /* Prefetch next mbuf while processing current one. */
+ rte_prefetch0(q->sw_ring[next_dd]);
+
+ /*
+ * When next RX descriptor is on a cache-line boundary,
+ * prefetch the next 4 RX descriptors and the next 8 pointers
+ * to mbufs.
+ */
+ if ((next_dd & 0x3) == 0) {
+ rte_prefetch0(&q->hw_ring[next_dd]);
+ rte_prefetch0(&q->sw_ring[next_dd]);
+ }
+ }
+
+ q->next_dd = next_dd;
+
+ if ((q->next_dd > q->next_trigger) || (alloc == 1)) {
+ rte_mempool_get_bulk(q->mp, (void **)&q->sw_ring[q->next_alloc],
+ q->alloc_thresh);
+ for (; q->next_alloc <= q->next_trigger; ++q->next_alloc) {
+ mbuf = q->sw_ring[q->next_alloc];
+
+ /* setup static mbuf fields */
+ fm10k_pktmbuf_reset(mbuf, q->port_id);
+
+ /* write descriptor */
+ desc.q.pkt_addr = MBUF_DMA_ADDR_DEFAULT(mbuf);
+ desc.q.hdr_addr = MBUF_DMA_ADDR_DEFAULT(mbuf);
+ q->hw_ring[q->next_alloc] = desc;
+ }
+ FM10K_PCI_REG_WRITE(q->tail_ptr, q->next_trigger);
+ q->next_trigger += q->alloc_thresh;
+ if (q->next_trigger >= q->nb_desc) {
+ q->next_trigger = q->alloc_thresh - 1;
+ q->next_alloc = 0;
+ }
+ }
+
+ return count;
+}
+
+static inline void tx_free_descriptors(struct fm10k_tx_queue *q)
+{
+ uint16_t next_rs, count = 0;
+
+ next_rs = fifo_peek(&q->rs_tracker);
+ if (!(q->hw_ring[next_rs].flags & FM10K_TXD_FLAG_DONE))
+ return;
+
+ /* the DONE flag is set on this descriptor so remove the ID
+ * from the RS bit tracker and free the buffers */
+ fifo_remove(&q->rs_tracker);
+
+ /* wrap around? if so, free buffers from last_free up to but NOT
+ * including nb_desc */
+ if (q->last_free > next_rs) {
+ count = q->nb_desc - q->last_free;
+ while (q->last_free < q->nb_desc) {
+ rte_pktmbuf_free_seg(q->sw_ring[q->last_free]);
+ q->sw_ring[q->last_free] = NULL;
+ ++q->last_free;
+ }
+ q->last_free = 0;
+ }
+
+ /* adjust free descriptor count before the next loop */
+ q->nb_free += count + (next_rs + 1 - q->last_free);
+
+ /* free buffers from last_free, up to and including next_rs */
+ while (q->last_free <= next_rs) {
+ rte_pktmbuf_free_seg(q->sw_ring[q->last_free]);
+ q->sw_ring[q->last_free] = NULL;
+ ++q->last_free;
+ }
+
+ if (q->last_free == q->nb_desc)
+ q->last_free = 0;
+}
+
+static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
+{
+ uint16_t last_id;
+ uint8_t flags;
+
+ /* always set the LAST flag on the last descriptor used to
+ * transmit the packet */
+ flags = FM10K_TXD_FLAG_LAST;
+ last_id = q->next_free + mb->nb_segs - 1;
+ if (last_id >= q->nb_desc)
+ last_id = last_id - q->nb_desc;
+
+ /* but only set the RS flag on the last descriptor if rs_thresh
+ * descriptors will be used since the RS flag was last set */
+ if ((q->nb_used + mb->nb_segs) >= q->rs_thresh) {
+ flags |= FM10K_TXD_FLAG_RS;
+ fifo_insert(&q->rs_tracker, last_id);
+ q->nb_used = 0;
+ } else {
+ q->nb_used = q->nb_used + mb->nb_segs;
+ }
+
+ q->hw_ring[last_id].flags = flags;
+ q->nb_free -= mb->nb_segs;
+
+ /* set checksum flags on first descriptor of packet. SCTP checksum
+ * offload is not supported, but we do not explicitely check for this
+ * case in favor of greatly simplified processing. */
+ if (mb->ol_flags & (PKT_TX_IPV4_CSUM | PKT_TX_L4_MASK))
+ q->hw_ring[q->next_free].flags |= FM10K_TXD_FLAG_CSUM;
+
+ /* set vlan if requested */
+ if (mb->ol_flags & PKT_TX_VLAN_PKT)
+ q->hw_ring[q->next_free].vlan = mb->vlan_tci;
+
+ /* fill up the rings */
+ for (; mb != NULL; mb = mb->next) {
+ q->sw_ring[q->next_free] = mb;
+ q->hw_ring[q->next_free].buffer_addr =
+ rte_cpu_to_le_64(MBUF_DMA_ADDR(mb));
+ q->hw_ring[q->next_free].buflen =
+ rte_cpu_to_le_16(rte_pktmbuf_data_len(mb));
+ if (++q->next_free == q->nb_desc)
+ q->next_free = 0;
+ }
+}
+
+uint16_t
+fm10k_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fm10k_tx_queue *q = tx_queue;
+ struct rte_mbuf *mb;
+ uint16_t count;
+
+ for (count = 0; count < nb_pkts; ++count) {
+ mb = tx_pkts[count];
+
+ /* running low on descriptors? try to free some... */
+ if (q->nb_free < q->free_trigger)
+ tx_free_descriptors(q);
+
+ /* make sure there are enough free descriptors to transmit the
+ * entire packet before doing anything */
+ if (q->nb_free < mb->nb_segs)
+ break;
+
+ /* sanity check to make sure the mbuf is valid */
+ if ((mb->nb_segs == 0) ||
+ ((mb->nb_segs > 1) && (mb->next == NULL)))
+ break;
+
+ /* process the packet */
+ tx_xmit_pkt(q, mb);
+ }
+
+ /* update the tail pointer if any packets were processed */
+ if (count > 0)
+ FM10K_PCI_REG_WRITE(q->tail_ptr, q->next_free);
+
+ return count;
+}
--
1.7.7.6
next prev parent reply other threads:[~2015-02-11 1:32 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18 0:13 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08 ` David Marchand
2015-02-17 13:01 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31 ` David Marchand
2015-02-13 16:45 ` Jeff Shaw
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:07 ` Chen, Jing D
2015-02-13 11:53 ` David Marchand
2015-02-17 13:10 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55 ` David Marchand
2015-02-17 13:11 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:12 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13 8:37 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15 5:07 ` Qiu, Michael
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11 1:31 ` Chen Jing D(Mark) [this message]
2015-02-11 17:28 ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11 1:50 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41 ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02 ` Neil Horman
2015-02-02 5:34 ` Chen, Jing D
[not found] ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03 6:47 ` Chen, Jing D
2015-02-01 13:01 ` David Marchand
2015-01-30 5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19 ` Neil Horman
2015-01-31 16:07 ` David Marchand
2015-01-31 16:32 ` Neil Horman
2015-01-31 16:55 ` David Marchand
2015-01-31 18:35 ` Neil Horman
2015-05-07 11:06 ` David Marchand
2015-05-07 13:36 ` Neil Horman
2015-05-07 13:39 ` David Marchand
2015-02-02 7:54 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 2:36 ` Qiu, Michael
2015-02-04 9:55 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01 0:38 ` Neil Horman
2015-01-30 5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01 0:42 ` Neil Horman
2015-02-02 7:59 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01 0:50 ` Neil Horman
2015-02-02 8:10 ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46 ` Jeff Shaw
2015-01-30 22:19 ` Thomas Monjalon
2015-02-02 2:59 ` Chen, Jing D
2015-02-02 8:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423618298-2933-11-git-send-email-jing.d.chen@intel.com \
--to=jing.d.chen@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).