From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function
Date: Fri, 13 Feb 2015 16:19:47 +0800 [thread overview]
Message-ID: <1423815597-17819-8-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1423815597-17819-1-git-send-email-jing.d.chen@intel.com>
From: Jeff Shaw <jeffrey.b.shaw@intel.com>
Add fm10k_tx_queue_setup and fm10k_tx_queue_release functions.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
lib/librte_pmd_fm10k/fm10k_ethdev.c | 205 +++++++++++++++++++++++++++++++++++
1 files changed, 205 insertions(+), 0 deletions(-)
diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index 7280501..989ecfd 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -108,6 +108,48 @@ rx_queue_free(struct fm10k_rx_queue *q)
}
}
+/*
+ * clean queue, descriptor rings, free software buffers used when stopping
+ * device
+ */
+static inline void
+tx_queue_clean(struct fm10k_tx_queue *q)
+{
+ struct fm10k_tx_desc zero = {0, 0, 0, 0, 0, 0};
+ uint32_t i;
+ PMD_INIT_FUNC_TRACE();
+
+ /* zero descriptor rings */
+ for (i = 0; i < q->nb_desc; ++i)
+ q->hw_ring[i] = zero;
+
+ /* free software buffers */
+ for (i = 0; i < q->nb_desc; ++i) {
+ if (q->sw_ring[i]) {
+ rte_pktmbuf_free_seg(q->sw_ring[i]);
+ q->sw_ring[i] = NULL;
+ }
+ }
+}
+
+/*
+ * free all queue memory used when releasing the queue (i.e. configure)
+ */
+static inline void
+tx_queue_free(struct fm10k_tx_queue *q)
+{
+ PMD_INIT_FUNC_TRACE();
+ if (q) {
+ PMD_INIT_LOG(DEBUG, "Freeing tx queue %p", q);
+ tx_queue_clean(q);
+ if (q->rs_tracker.list)
+ rte_free(q->rs_tracker.list);
+ if (q->sw_ring)
+ rte_free(q->sw_ring);
+ rte_free(q);
+ }
+}
+
static int
fm10k_dev_configure(struct rte_eth_dev *dev)
{
@@ -439,6 +481,167 @@ fm10k_rx_queue_release(void *queue)
rx_queue_free(queue);
}
+static inline int
+handle_txconf(struct fm10k_tx_queue *q, const struct rte_eth_txconf *conf)
+{
+ uint16_t tx_free_thresh;
+ uint16_t tx_rs_thresh;
+
+ /* constraint MACROs require that tx_free_thresh is configured
+ * before tx_rs_thresh */
+ if (conf->tx_free_thresh == 0)
+ tx_free_thresh = FM10K_TX_FREE_THRESH_DEFAULT(q);
+ else
+ tx_free_thresh = conf->tx_free_thresh;
+
+ /* make sure the requested threshold satisfies the constraints */
+ if (check_thresh(FM10K_TX_FREE_THRESH_MIN(q),
+ FM10K_TX_FREE_THRESH_MAX(q),
+ FM10K_TX_FREE_THRESH_DIV(q),
+ tx_free_thresh)) {
+ PMD_INIT_LOG(ERR, "tx_free_thresh (%u) must be "
+ "less than or equal to %u, "
+ "greater than or equal to %u, "
+ "and a divisor of %u",
+ tx_free_thresh, FM10K_TX_FREE_THRESH_MAX(q),
+ FM10K_TX_FREE_THRESH_MIN(q),
+ FM10K_TX_FREE_THRESH_DIV(q));
+ return (-EINVAL);
+ }
+
+ q->free_thresh = tx_free_thresh;
+
+ if (conf->tx_rs_thresh == 0)
+ tx_rs_thresh = FM10K_TX_RS_THRESH_DEFAULT(q);
+ else
+ tx_rs_thresh = conf->tx_rs_thresh;
+
+ q->tx_deferred_start = conf->tx_deferred_start;
+
+ /* make sure the requested threshold satisfies the constraints */
+ if (check_thresh(FM10K_TX_RS_THRESH_MIN(q),
+ FM10K_TX_RS_THRESH_MAX(q),
+ FM10K_TX_RS_THRESH_DIV(q),
+ tx_rs_thresh)) {
+ PMD_INIT_LOG(ERR, "tx_rs_thresh (%u) must be "
+ "less than or equal to %u, "
+ "greater than or equal to %u, "
+ "and a divisor of %u",
+ tx_rs_thresh, FM10K_TX_RS_THRESH_MAX(q),
+ FM10K_TX_RS_THRESH_MIN(q),
+ FM10K_TX_RS_THRESH_DIV(q));
+ return (-EINVAL);
+ }
+
+ q->rs_thresh = tx_rs_thresh;
+
+ return 0;
+}
+
+static int
+fm10k_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_id,
+ uint16_t nb_desc, unsigned int socket_id,
+ const struct rte_eth_txconf *conf)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct fm10k_tx_queue *q;
+ const struct rte_memzone *mz;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* make sure a valid number of descriptors have been requested */
+ if (check_nb_desc(FM10K_MIN_TX_DESC, FM10K_MAX_TX_DESC,
+ FM10K_MULT_TX_DESC, nb_desc)) {
+ PMD_INIT_LOG(ERR, "Number of Tx descriptors (%u) must be "
+ "less than or equal to %"PRIu32", "
+ "greater than or equal to %u, "
+ "and a multiple of %u",
+ nb_desc, (uint32_t)FM10K_MAX_TX_DESC, FM10K_MIN_TX_DESC,
+ FM10K_MULT_TX_DESC);
+ return (-EINVAL);
+ }
+
+ /*
+ * if this queue existed already, free the associated memory. The
+ * queue cannot be reused in case we need to allocate memory on
+ * different socket than was previously used.
+ */
+ if (dev->data->tx_queues[queue_id] != NULL) {
+ tx_queue_free(dev->data->tx_queues[queue_id]);
+ dev->data->tx_queues[queue_id] = NULL;
+ }
+
+ /* allocate memory for the queue structure */
+ q = rte_zmalloc_socket("fm10k", sizeof(*q), RTE_CACHE_LINE_SIZE,
+ socket_id);
+ if (q == NULL) {
+ PMD_INIT_LOG(ERR, "Cannot allocate queue structure");
+ return (-ENOMEM);
+ }
+
+ /* setup queue */
+ q->nb_desc = nb_desc;
+ q->port_id = dev->data->port_id;
+ q->queue_id = queue_id;
+ q->tail_ptr = (volatile uint32_t *)
+ &((uint32_t *)hw->hw_addr)[FM10K_TDT(queue_id)];
+ if (handle_txconf(q, conf))
+ return (-EINVAL);
+
+ /* allocate memory for the software ring */
+ q->sw_ring = rte_zmalloc_socket("fm10k sw ring",
+ nb_desc * sizeof(struct rte_mbuf *),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (q->sw_ring == NULL) {
+ PMD_INIT_LOG(ERR, "Cannot allocate software ring");
+ rte_free(q);
+ return (-ENOMEM);
+ }
+
+ /*
+ * allocate memory for the hardware descriptor ring. A memzone large
+ * enough to hold the maximum ring size is requested to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ mz = allocate_hw_ring(dev->driver->pci_drv.name, "tx_ring",
+ dev->data->port_id, queue_id, socket_id,
+ FM10K_MAX_TX_RING_SZ, FM10K_ALIGN_TX_DESC);
+ if (mz == NULL) {
+ PMD_INIT_LOG(ERR, "Cannot allocate hardware ring");
+ rte_free(q->sw_ring);
+ rte_free(q);
+ return (-ENOMEM);
+ }
+ q->hw_ring = mz->addr;
+ q->hw_ring_phys_addr = mz->phys_addr;
+
+ /*
+ * allocate memory for the RS bit tracker. Enough slots to hold the
+ * descriptor index for each RS bit needing to be set are required.
+ */
+ q->rs_tracker.list = rte_zmalloc_socket("fm10k rs tracker",
+ ((nb_desc + 1) / q->rs_thresh) *
+ sizeof(uint16_t),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (q->rs_tracker.list == NULL) {
+ PMD_INIT_LOG(ERR, "Cannot allocate RS bit tracker");
+ rte_free(q->sw_ring);
+ rte_free(q);
+ return (-ENOMEM);
+ }
+
+ dev->data->tx_queues[queue_id] = q;
+ return 0;
+}
+
+static void
+fm10k_tx_queue_release(void *queue)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ tx_queue_free(queue);
+}
+
static int
fm10k_reta_update(struct rte_eth_dev *dev,
struct rte_eth_rss_reta_entry64 *reta_conf,
@@ -580,6 +783,8 @@ static struct eth_dev_ops fm10k_eth_dev_ops = {
.dev_infos_get = fm10k_dev_infos_get,
.rx_queue_setup = fm10k_rx_queue_setup,
.rx_queue_release = fm10k_rx_queue_release,
+ .tx_queue_setup = fm10k_tx_queue_setup,
+ .tx_queue_release = fm10k_tx_queue_release,
.reta_update = fm10k_reta_update,
.reta_query = fm10k_reta_query,
};
--
1.7.7.6
next prev parent reply other threads:[~2015-02-13 8:20 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18 0:13 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08 ` David Marchand
2015-02-17 13:01 ` Chen, Jing D
2015-02-13 8:19 ` Chen Jing D(Mark) [this message]
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31 ` David Marchand
2015-02-13 16:45 ` Jeff Shaw
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:07 ` Chen, Jing D
2015-02-13 11:53 ` David Marchand
2015-02-17 13:10 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55 ` David Marchand
2015-02-17 13:11 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:12 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13 8:37 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15 5:07 ` Qiu, Michael
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-11 17:28 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11 1:50 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41 ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02 ` Neil Horman
2015-02-02 5:34 ` Chen, Jing D
[not found] ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03 6:47 ` Chen, Jing D
2015-02-01 13:01 ` David Marchand
2015-01-30 5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19 ` Neil Horman
2015-01-31 16:07 ` David Marchand
2015-01-31 16:32 ` Neil Horman
2015-01-31 16:55 ` David Marchand
2015-01-31 18:35 ` Neil Horman
2015-05-07 11:06 ` David Marchand
2015-05-07 13:36 ` Neil Horman
2015-05-07 13:39 ` David Marchand
2015-02-02 7:54 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 2:36 ` Qiu, Michael
2015-02-04 9:55 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01 0:38 ` Neil Horman
2015-01-30 5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01 0:42 ` Neil Horman
2015-02-02 7:59 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01 0:50 ` Neil Horman
2015-02-02 8:10 ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46 ` Jeff Shaw
2015-01-30 22:19 ` Thomas Monjalon
2015-02-02 2:59 ` Chen, Jing D
2015-02-02 8:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423815597-17819-8-git-send-email-jing.d.chen@intel.com \
--to=jing.d.chen@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).