From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function
Date: Tue, 17 Feb 2015 22:18:58 +0800 [thread overview]
Message-ID: <1424182739-11058-16-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1424182739-11058-1-git-send-email-jing.d.chen@intel.com>
From: Jeff Shaw <jeffrey.b.shaw@intel.com>
1. Add functions to enable PF/VF interrupt.
2. Add function to process error message passed from interrupt.
2. Add 2 interrupt handling functions, one for PF and one for VF.
2. Enable interrupt after completing initialization of NIC.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
lib/librte_pmd_fm10k/fm10k_ethdev.c | 268 +++++++++++++++++++++++++++++++++++
1 files changed, 268 insertions(+), 0 deletions(-)
diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index 8261fe8..38f6925 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -1344,6 +1344,256 @@ fm10k_rss_hash_conf_get(struct rte_eth_dev *dev,
return 0;
}
+static void
+fm10k_dev_enable_intr_pf(struct rte_eth_dev *dev)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t int_map = FM10K_INT_MAP_IMMEDIATE;
+
+ /* Bind all local non-queue interrupt to vector 0 */
+ int_map |= 0;
+
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_Mailbox), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchEvent), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SRAM), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_VFLR), int_map);
+
+ /* Enable misc causes */
+ FM10K_WRITE_REG(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
+ FM10K_EIMR_ENABLE(THI_FAULT) |
+ FM10K_EIMR_ENABLE(FUM_FAULT) |
+ FM10K_EIMR_ENABLE(MAILBOX) |
+ FM10K_EIMR_ENABLE(SWITCHREADY) |
+ FM10K_EIMR_ENABLE(SWITCHNOTREADY) |
+ FM10K_EIMR_ENABLE(SRAMERROR) |
+ FM10K_EIMR_ENABLE(VFLR));
+
+ /* Enable ITR 0 */
+ FM10K_WRITE_REG(hw, FM10K_ITR(0), FM10K_ITR_AUTOMASK |
+ FM10K_ITR_MASK_CLEAR);
+ FM10K_WRITE_FLUSH(hw);
+}
+
+static void
+fm10k_dev_enable_intr_vf(struct rte_eth_dev *dev)
+{
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t int_map = FM10K_INT_MAP_IMMEDIATE;
+
+ /* Bind all local non-queue interrupt to vector 0 */
+ int_map |= 0;
+
+ /* Only INT 0 available, other 15 are reserved. */
+ FM10K_WRITE_REG(hw, FM10K_VFINT_MAP, int_map);
+
+ /* Enable ITR 0 */
+ FM10K_WRITE_REG(hw, FM10K_VFITR(0), FM10K_ITR_AUTOMASK |
+ FM10K_ITR_MASK_CLEAR);
+ FM10K_WRITE_FLUSH(hw);
+}
+
+static int
+fm10k_dev_handle_fault(struct fm10k_hw *hw, uint32_t eicr)
+{
+ struct fm10k_fault fault;
+ int err;
+ const char *estr = "Unknown error";
+
+ /* Process PCA fault */
+ if (eicr & FM10K_EIMR_PCA_FAULT) {
+ err = fm10k_get_fault(hw, FM10K_PCA_FAULT, &fault);
+ if (err)
+ goto error;
+ switch (fault.type) {
+ case PCA_NO_FAULT:
+ estr = "PCA_NO_FAULT"; break;
+ case PCA_UNMAPPED_ADDR:
+ estr = "PCA_UNMAPPED_ADDR"; break;
+ case PCA_BAD_QACCESS_PF:
+ estr = "PCA_BAD_QACCESS_PF"; break;
+ case PCA_BAD_QACCESS_VF:
+ estr = "PCA_BAD_QACCESS_VF"; break;
+ case PCA_MALICIOUS_REQ:
+ estr = "PCA_MALICIOUS_REQ"; break;
+ case PCA_POISONED_TLP:
+ estr = "PCA_POISONED_TLP"; break;
+ case PCA_TLP_ABORT:
+ estr = "PCA_TLP_ABORT"; break;
+ default:
+ goto error;
+ }
+ PMD_INIT_LOG(ERR, "%s: %s(%d) Addr:0x%"PRIx64" Spec: 0x%x",
+ estr, fault.func ? "VF" : "PF", fault.func,
+ fault.address, fault.specinfo);
+ }
+
+ /* Process THI fault */
+ if (eicr & FM10K_EIMR_THI_FAULT) {
+ err = fm10k_get_fault(hw, FM10K_THI_FAULT, &fault);
+ if (err)
+ goto error;
+ switch (fault.type) {
+ case THI_NO_FAULT:
+ estr = "THI_NO_FAULT"; break;
+ case THI_MAL_DIS_Q_FAULT:
+ estr = "THI_MAL_DIS_Q_FAULT"; break;
+ default:
+ goto error;
+ }
+ PMD_INIT_LOG(ERR, "%s: %s(%d) Addr:0x%"PRIx64" Spec: 0x%x",
+ estr, fault.func ? "VF" : "PF", fault.func,
+ fault.address, fault.specinfo);
+ }
+
+ /* Process FUM fault */
+ if (eicr & FM10K_EIMR_FUM_FAULT) {
+ err = fm10k_get_fault(hw, FM10K_FUM_FAULT, &fault);
+ if (err)
+ goto error;
+ switch (fault.type) {
+ case FUM_NO_FAULT:
+ estr = "FUM_NO_FAULT"; break;
+ case FUM_UNMAPPED_ADDR:
+ estr = "FUM_UNMAPPED_ADDR"; break;
+ case FUM_POISONED_TLP:
+ estr = "FUM_POISONED_TLP"; break;
+ case FUM_BAD_VF_QACCESS:
+ estr = "FUM_BAD_VF_QACCESS"; break;
+ case FUM_ADD_DECODE_ERR:
+ estr = "FUM_ADD_DECODE_ERR"; break;
+ case FUM_RO_ERROR:
+ estr = "FUM_RO_ERROR"; break;
+ case FUM_QPRC_CRC_ERROR:
+ estr = "FUM_QPRC_CRC_ERROR"; break;
+ case FUM_CSR_TIMEOUT:
+ estr = "FUM_CSR_TIMEOUT"; break;
+ case FUM_INVALID_TYPE:
+ estr = "FUM_INVALID_TYPE"; break;
+ case FUM_INVALID_LENGTH:
+ estr = "FUM_INVALID_LENGTH"; break;
+ case FUM_INVALID_BE:
+ estr = "FUM_INVALID_BE"; break;
+ case FUM_INVALID_ALIGN:
+ estr = "FUM_INVALID_ALIGN"; break;
+ default:
+ goto error;
+ }
+ PMD_INIT_LOG(ERR, "%s: %s(%d) Addr:0x%"PRIx64" Spec: 0x%x",
+ estr, fault.func ? "VF" : "PF", fault.func,
+ fault.address, fault.specinfo);
+ }
+
+ if (estr)
+ return 0;
+ return 0;
+error:
+ PMD_INIT_LOG(ERR, "Failed to handle fault event.");
+ return err;
+}
+
+/**
+ * PF interrupt handler triggered by NIC for handling specific interrupt.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+fm10k_dev_interrupt_handler_pf(
+ __rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t cause, status;
+
+ if (hw->mac.type != fm10k_mac_pf)
+ return;
+
+ cause = FM10K_READ_REG(hw, FM10K_EICR);
+
+ /* Handle PCI fault cases */
+ if (cause & FM10K_EICR_FAULT_MASK) {
+ PMD_INIT_LOG(ERR, "INT: find fault!");
+ fm10k_dev_handle_fault(hw, cause);
+ }
+
+ /* Handle switch up/down */
+ if (cause & FM10K_EICR_SWITCHNOTREADY)
+ PMD_INIT_LOG(ERR, "INT: Switch is not ready");
+
+ if (cause & FM10K_EICR_SWITCHREADY)
+ PMD_INIT_LOG(INFO, "INT: Switch is ready");
+
+ /* Handle mailbox message */
+ fm10k_mbx_lock(hw);
+ hw->mbx.ops.process(hw, &hw->mbx);
+ fm10k_mbx_unlock(hw);
+
+ /* Handle SRAM error */
+ if (cause & FM10K_EICR_SRAMERROR) {
+ PMD_INIT_LOG(ERR, "INT: SRAM error on PEP");
+
+ status = FM10K_READ_REG(hw, FM10K_SRAM_IP);
+ /* Write to clear pending bits */
+ FM10K_WRITE_REG(hw, FM10K_SRAM_IP, status);
+
+ /* Todo: print out error message after shared code updates */
+ }
+
+ /* Clear these 3 events if having any */
+ cause &= FM10K_EICR_SWITCHNOTREADY | FM10K_EICR_MAILBOX |
+ FM10K_EICR_SWITCHREADY;
+ if (cause)
+ FM10K_WRITE_REG(hw, FM10K_EICR, cause);
+
+ /* Re-enable interrupt from device side */
+ FM10K_WRITE_REG(hw, FM10K_ITR(0), FM10K_ITR_AUTOMASK |
+ FM10K_ITR_MASK_CLEAR);
+ /* Re-enable interrupt from host side */
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+}
+
+/**
+ * VF interrupt handler triggered by NIC for handling specific interrupt.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+fm10k_dev_interrupt_handler_vf(
+ __rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ if (hw->mac.type != fm10k_mac_vf)
+ return;
+
+ /* Handle mailbox message if lock is acquired */
+ fm10k_mbx_lock(hw);
+ hw->mbx.ops.process(hw, &hw->mbx);
+ fm10k_mbx_unlock(hw);
+
+ /* Re-enable interrupt from device side */
+ FM10K_WRITE_REG(hw, FM10K_VFITR(0), FM10K_ITR_AUTOMASK |
+ FM10K_ITR_MASK_CLEAR);
+ /* Re-enable interrupt from host side */
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+}
+
/* Mailbox message handler in VF */
static const struct fm10k_msg_data fm10k_msgdata_vf[] = {
FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
@@ -1524,6 +1774,21 @@ eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
return -EIO;
}
+ /*PF/VF has different interrupt handling mechanism */
+ if (hw->mac.type == fm10k_mac_pf) {
+ /* register callback func to eal lib */
+ rte_intr_callback_register(&(dev->pci_dev->intr_handle),
+ fm10k_dev_interrupt_handler_pf, (void *)dev);
+
+ /* enable MISC interrupt */
+ fm10k_dev_enable_intr_pf(dev);
+ } else { /* VF */
+ rte_intr_callback_register(&(dev->pci_dev->intr_handle),
+ fm10k_dev_interrupt_handler_vf, (void *)dev);
+
+ fm10k_dev_enable_intr_vf(dev);
+ }
+
/*
* Below function will trigger operations on mailbox, acquire lock to
* avoid race condition from interrupt handler. Operations on mailbox
@@ -1553,6 +1818,9 @@ eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
fm10k_mbx_unlock(hw);
+ /* enable uio intr after callback registered */
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+
return 0;
}
--
1.7.7.6
next prev parent reply other threads:[~2015-02-17 14:19 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18 ` Chen Jing D(Mark) [this message]
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18 0:13 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08 ` David Marchand
2015-02-17 13:01 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31 ` David Marchand
2015-02-13 16:45 ` Jeff Shaw
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:07 ` Chen, Jing D
2015-02-13 11:53 ` David Marchand
2015-02-17 13:10 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55 ` David Marchand
2015-02-17 13:11 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:12 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13 8:37 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15 5:07 ` Qiu, Michael
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-11 17:28 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11 1:50 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41 ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02 ` Neil Horman
2015-02-02 5:34 ` Chen, Jing D
[not found] ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03 6:47 ` Chen, Jing D
2015-02-01 13:01 ` David Marchand
2015-01-30 5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19 ` Neil Horman
2015-01-31 16:07 ` David Marchand
2015-01-31 16:32 ` Neil Horman
2015-01-31 16:55 ` David Marchand
2015-01-31 18:35 ` Neil Horman
2015-05-07 11:06 ` David Marchand
2015-05-07 13:36 ` Neil Horman
2015-05-07 13:39 ` David Marchand
2015-02-02 7:54 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 2:36 ` Qiu, Michael
2015-02-04 9:55 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01 0:38 ` Neil Horman
2015-01-30 5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01 0:42 ` Neil Horman
2015-02-02 7:59 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01 0:50 ` Neil Horman
2015-02-02 8:10 ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46 ` Jeff Shaw
2015-01-30 22:19 ` Thomas Monjalon
2015-02-02 2:59 ` Chen, Jing D
2015-02-02 8:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424182739-11058-16-git-send-email-jing.d.chen@intel.com \
--to=jing.d.chen@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).