From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 3/3] examples/packet_ordering: move creation of reorder buffer
Date: Fri, 20 Feb 2015 12:10:53 +0000 [thread overview]
Message-ID: <1424434253-6808-4-git-send-email-sergio.gonzalez.monroy@intel.com> (raw)
In-Reply-To: <1424434253-6808-1-git-send-email-sergio.gonzalez.monroy@intel.com>
There was no error checking after calling rte_reorder_create.
Move the creation of the reorder buffer before launching threads
in case of memory error.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
examples/packet_ordering/main.c | 37 +++++++++++++++++++++++++------------
1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
index 75e2f46..3d7daaa 100644
--- a/examples/packet_ordering/main.c
+++ b/examples/packet_ordering/main.c
@@ -82,6 +82,11 @@ struct worker_thread_args {
struct rte_ring *ring_out;
};
+struct send_thread_args {
+ struct rte_ring *ring_in;
+ struct rte_reorder_buffer *buffer;
+};
+
struct output_buffer {
unsigned count;
struct rte_mbuf *mbufs[MAX_PKTS_BURST];
@@ -455,7 +460,7 @@ flush_one_port(struct output_buffer *outbuf, uint8_t outp)
* transmitting.
*/
static int
-send_thread(struct rte_ring *ring_in)
+send_thread(struct send_thread_args *args)
{
int ret;
unsigned int i, dret;
@@ -464,15 +469,13 @@ send_thread(struct rte_ring *ring_in)
static struct output_buffer tx_buffers[RTE_MAX_ETHPORTS];
struct rte_mbuf *mbufs[MAX_PKTS_BURST];
struct rte_mbuf *rombufs[MAX_PKTS_BURST] = {NULL};
- struct rte_reorder_buffer *buffer;
- RTE_LOG(INFO, REORDERAPP, "%s() started on lcore %u\n", __func__,
- rte_lcore_id());
- buffer = rte_reorder_create("PKT_RO", rte_socket_id(), REORDER_BUFFER_SIZE);
+ RTE_LOG(INFO, REORDERAPP, "%s() started on lcore %u\n", __func__, rte_lcore_id());
+
while (!quit_signal) {
/* deque the mbufs from workers_to_tx ring */
- nb_dq_mbufs = rte_ring_dequeue_burst(ring_in,
+ nb_dq_mbufs = rte_ring_dequeue_burst(args->ring_in,
(void *)mbufs, MAX_PKTS_BURST);
if (unlikely(nb_dq_mbufs == 0))
@@ -482,7 +485,7 @@ send_thread(struct rte_ring *ring_in)
for (i = 0; i < nb_dq_mbufs; i++) {
/* send dequeued mbufs for reordering */
- ret = rte_reorder_insert(buffer, mbufs[i]);
+ ret = rte_reorder_insert(args->buffer, mbufs[i]);
if (ret == -1 && rte_errno == ERANGE) {
/* Too early pkts should be transmitted out directly */
@@ -510,7 +513,7 @@ send_thread(struct rte_ring *ring_in)
* drain MAX_PKTS_BURST of reordered
* mbufs for transmit
*/
- dret = rte_reorder_drain(buffer, rombufs, MAX_PKTS_BURST);
+ dret = rte_reorder_drain(args->buffer, rombufs, MAX_PKTS_BURST);
for (i = 0; i < dret; i++) {
struct output_buffer *outbuf;
@@ -584,6 +587,7 @@ main(int argc, char **argv)
uint8_t port_id;
uint8_t nb_ports_available;
struct worker_thread_args worker_args = {NULL, NULL};
+ struct send_thread_args send_args = {NULL, NULL};
struct rte_ring *rx_to_workers;
struct rte_ring *workers_to_tx;
@@ -661,6 +665,13 @@ main(int argc, char **argv)
if (workers_to_tx == NULL)
rte_exit(EXIT_FAILURE, "%s\n", rte_strerror(rte_errno));
+ if (!disable_reorder) {
+ send_args.buffer = rte_reorder_create("PKT_RO", rte_socket_id(),
+ REORDER_BUFFER_SIZE);
+ if (send_args.buffer == NULL)
+ rte_exit(EXIT_FAILURE, "%s\n", rte_strerror(rte_errno));
+ }
+
last_lcore_id = get_last_lcore_id();
master_lcore_id = rte_get_master_lcore();
@@ -673,14 +684,16 @@ main(int argc, char **argv)
rte_eal_remote_launch(worker_thread, (void *)&worker_args,
lcore_id);
- if (disable_reorder)
+ if (disable_reorder) {
/* Start tx_thread() on the last slave core */
rte_eal_remote_launch((lcore_function_t *)tx_thread, workers_to_tx,
last_lcore_id);
- else
+ } else {
+ send_args.ring_in = workers_to_tx;
/* Start send_thread() on the last slave core */
- rte_eal_remote_launch((lcore_function_t *)send_thread, workers_to_tx,
- last_lcore_id);
+ rte_eal_remote_launch((lcore_function_t *)send_thread,
+ (void *)&send_args, last_lcore_id);
+ }
/* Start rx_thread() on the master core */
rx_thread(rx_to_workers);
--
1.9.3
next prev parent reply other threads:[~2015-02-20 12:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-20 12:10 [dpdk-dev] [PATCH 0/3] Misc fixes Sergio Gonzalez Monroy
2015-02-20 12:10 ` [dpdk-dev] [PATCH 1/3] doc: add librte_reorder to doxygen conf Sergio Gonzalez Monroy
2015-02-20 12:10 ` [dpdk-dev] [PATCH 2/3] mbuf: fix a couple of doxygen comments Sergio Gonzalez Monroy
2015-02-20 12:10 ` Sergio Gonzalez Monroy [this message]
2015-02-24 2:04 ` [dpdk-dev] [PATCH 0/3] Misc fixes Thomas Monjalon
2015-02-24 8:46 ` Olivier MATZ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424434253-6808-4-git-send-email-sergio.gonzalez.monroy@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).