DPDK patches and discussions
 help / color / mirror / Atom feed
From: John McNamara <john.mcnamara@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 2/3] ethdev: add optional rxtx callback support
Date: Fri, 20 Feb 2015 17:03:46 +0000	[thread overview]
Message-ID: <1424451827-32293-3-git-send-email-john.mcnamara@intel.com> (raw)
In-Reply-To: <1424451827-32293-1-git-send-email-john.mcnamara@intel.com>

From: Richardson, Bruce <bruce.richardson@intel.com>

Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
---
 config/common_bsdapp                   |    1 +
 config/common_linuxapp                 |    1 +
 lib/librte_ether/rte_ethdev.c          |  192 +++++++++++++++++++++++++++++-
 lib/librte_ether/rte_ethdev.h          |  204 +++++++++++++++++++++++++++++++-
 lib/librte_ether/rte_ether_version.map |    4 +
 5 files changed, 397 insertions(+), 5 deletions(-)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index f11ff39..6fc7074 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -133,6 +133,7 @@ CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
 CONFIG_RTE_MAX_ETHPORTS=32
 CONFIG_RTE_LIBRTE_IEEE1588=n
 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 
 #
 # Support NIC bypass logic
diff --git a/config/common_linuxapp b/config/common_linuxapp
index f921d8c..c0ef9d6 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -131,6 +131,7 @@ CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
 CONFIG_RTE_MAX_ETHPORTS=32
 CONFIG_RTE_LIBRTE_IEEE1588=n
 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 
 #
 # Support NIC bypass logic
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 7c4e772..a8a8243 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -337,6 +337,20 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
 			dev->data->nb_rx_queues = 0;
 			return -(ENOMEM);
 		}
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+		dev->post_rx_burst_cbs = rte_zmalloc(
+			"ethdev->post_rx_burst_cbs",
+			sizeof(*dev->post_rx_burst_cbs) * nb_queues,
+			RTE_CACHE_LINE_SIZE);
+		if (dev->post_rx_burst_cbs == NULL) {
+			rte_free(dev->data->rx_queues);
+			dev->data->rx_queues = NULL;
+			dev->data->nb_rx_queues = 0;
+			return -(ENOMEM);
+		}
+#endif
+
 	} else { /* re-configure */
 		FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release, -ENOTSUP);
 
@@ -349,9 +363,25 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
 		if (rxq == NULL)
 			return -(ENOMEM);
 
-		if (nb_queues > old_nb_queues)
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+		dev->post_rx_burst_cbs = rte_realloc(
+			dev->post_rx_burst_cbs,
+			sizeof(*dev->post_rx_burst_cbs) *
+				nb_queues, RTE_CACHE_LINE_SIZE);
+		if (dev->post_rx_burst_cbs == NULL)
+			return -(ENOMEM);
+#endif
+
+		if (nb_queues > old_nb_queues) {
+			uint16_t new_qs = nb_queues - old_nb_queues;
 			memset(rxq + old_nb_queues, 0,
-				sizeof(rxq[0]) * (nb_queues - old_nb_queues));
+				sizeof(rxq[0]) * new_qs);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+			memset(dev->post_rx_burst_cbs + old_nb_queues, 0,
+				sizeof(dev->post_rx_burst_cbs[0]) * new_qs);
+#endif
+		}
 
 		dev->data->rx_queues = rxq;
 
@@ -479,6 +509,20 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
 			dev->data->nb_tx_queues = 0;
 			return -(ENOMEM);
 		}
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+		dev->pre_tx_burst_cbs = rte_zmalloc(
+			"ethdev->pre_tx_burst_cbs",
+			sizeof(*dev->pre_tx_burst_cbs) * nb_queues,
+			RTE_CACHE_LINE_SIZE);
+		if (dev->pre_tx_burst_cbs == NULL) {
+			rte_free(dev->data->tx_queues);
+			dev->data->tx_queues = NULL;
+			dev->data->nb_tx_queues = 0;
+			return -(ENOMEM);
+		}
+#endif
+
 	} else { /* re-configure */
 		FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release, -ENOTSUP);
 
@@ -491,9 +535,25 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
 		if (txq == NULL)
 			return -(ENOMEM);
 
-		if (nb_queues > old_nb_queues)
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+		dev->pre_tx_burst_cbs = rte_realloc(
+			dev->pre_tx_burst_cbs,
+			sizeof(*dev->pre_tx_burst_cbs) *
+				nb_queues, RTE_CACHE_LINE_SIZE);
+		if (dev->pre_tx_burst_cbs == NULL)
+			return -(ENOMEM);
+#endif
+
+		if (nb_queues > old_nb_queues) {
+			uint16_t new_qs = nb_queues - old_nb_queues;
 			memset(txq + old_nb_queues, 0,
-				sizeof(txq[0]) * (nb_queues - old_nb_queues));
+				sizeof(txq[0]) * new_qs);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+			memset(dev->pre_tx_burst_cbs + old_nb_queues, 0,
+				sizeof(dev->pre_tx_burst_cbs[0]) * new_qs);
+#endif
+		}
 
 		dev->data->tx_queues = txq;
 
@@ -3258,3 +3318,127 @@ rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
 	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
 	return (*dev->dev_ops->filter_ctrl)(dev, filter_type, filter_op, arg);
 }
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+void *
+rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rxtx_callback_fn fn, void *user_param)
+{
+	/* check input parameters */
+	if (port_id >= nb_ports || fn == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
+
+	if (cb == NULL) {
+		rte_errno = ENOMEM;
+		return NULL;
+	}
+
+	cb->fn = fn;
+	cb->param = user_param;
+	cb->next = rte_eth_devices[port_id].post_rx_burst_cbs[queue_id];
+	rte_eth_devices[port_id].post_rx_burst_cbs[queue_id] = cb;
+	return cb;
+}
+
+void *
+rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rxtx_callback_fn fn, void *user_param)
+{
+	/* check input parameters */
+	if (port_id >= nb_ports || fn == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
+
+	if (cb == NULL) {
+		rte_errno = ENOMEM;
+		return NULL;
+	}
+
+	cb->fn = fn;
+	cb->param = user_param;
+	cb->next = rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id];
+	rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id] = cb;
+	return cb;
+}
+
+int
+rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb)
+{
+	/* Check input parameters. */
+	if (port_id >= nb_ports || user_cb == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
+		return (-EINVAL);
+	}
+
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+	struct rte_eth_rxtx_callback *prev_cb;
+
+	/* Reset head pointer and remove user cb if first in the list. */
+	if (cb == user_cb) {
+		dev->post_rx_burst_cbs[queue_id] = user_cb->next;
+		return 0;
+	}
+
+	/* Remove the user cb from the callback list. */
+	do {
+		prev_cb = cb;
+		cb = cb->next;
+
+		if (cb == user_cb) {
+			prev_cb->next = user_cb->next;
+			return 0;
+		}
+
+	} while (cb != NULL);
+
+	/* Callback wasn't found. */
+	return (-EINVAL);
+}
+
+int
+rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb)
+{
+	/* Check input parameters. */
+	if (port_id >= nb_ports || user_cb == NULL ||
+		    queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
+		return (-EINVAL);
+	}
+
+	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+	struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+	struct rte_eth_rxtx_callback *prev_cb;
+
+	/* Reset head pointer and remove user cb if first in the list. */
+	if (cb == user_cb) {
+		dev->pre_tx_burst_cbs[queue_id] = user_cb->next;
+		return 0;
+	}
+
+	/* Remove the user cb from the callback list. */
+	do {
+		prev_cb = cb;
+		cb = cb->next;
+
+		if (cb == user_cb) {
+			prev_cb->next = user_cb->next;
+			return 0;
+		}
+
+	} while (cb != NULL);
+
+	/* Callback wasn't found. */
+	return (-EINVAL);
+}
+#endif	/* RTE_ETHDEV_RXTX_CALLBACKS */
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 48e4ac9..16eea8e 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1522,6 +1522,49 @@ struct eth_dev_ops {
 	eth_filter_ctrl_t              filter_ctrl;          /**< common filter control*/
 };
 
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+/**
+ * Function type used for callbacks for processing packets on RX and TX
+ *
+ * If configured for RX, it is called with a burst of packets that have just
+ * been received on the given port and queue. On TX, it is called with a burst
+ * of packets immediately before those packets are put onto the hardware queue
+ * for transmission.
+ *
+ * @param port
+ *   The ethernet port on which rx or tx is being performed
+ * @param queue
+ *   The queue on the ethernet port which is being used to receive or transmit
+ *   the packets.
+ * @param pkts
+ *   The burst of packets on which processing is to be done. On RX, these
+ *   packets have just been received. On TX, they are about to be transmitted.
+ * @param nb_pkts
+ *   The number of packets in the burst pointed to by "pkts"
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when the callback
+ *   was originally configured.
+ * @return
+ *   The number of packets remaining in pkts are processing.
+ *	* On RX, this will be returned to the user as the return value from
+ *	  rte_eth_rx_burst.
+ *	* On TX, this will be the number of packets actually written to the NIC.
+ */
+typedef uint16_t (*rte_rxtx_callback_fn)(uint8_t port, uint16_t queue,
+	struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
+
+/**
+ * @internal
+ * Structure used to hold information about the callbacks to be called for a
+ * queue on RX and TX.
+ */
+struct rte_eth_rxtx_callback {
+	struct rte_eth_rxtx_callback *next;
+	rte_rxtx_callback_fn fn;
+	void *param;
+};
+#endif
+
 /**
  * @internal
  * The generic data structure associated with each ethernet device.
@@ -1539,7 +1582,22 @@ struct rte_eth_dev {
 	const struct eth_driver *driver;/**< Driver for this device */
 	struct eth_dev_ops *dev_ops;    /**< Functions exported by PMD */
 	struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
-	struct rte_eth_dev_cb_list link_intr_cbs; /**< User application callbacks on interrupt*/
+	/** User application callbacks for NIC interrupts */
+	struct rte_eth_dev_cb_list link_intr_cbs;
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+	/**
+	 * User-supplied functions called from rx_burst to post-process
+	 * received packets before passing them to the user
+	 */
+	struct rte_eth_rxtx_callback **post_rx_burst_cbs;
+
+	/**
+	 * User-supplied functions called from tx_burst to pre-process
+	 * received packets before passing them to the driver for transmission.
+	 */
+	struct rte_eth_rxtx_callback **pre_tx_burst_cbs;
+#endif
 };
 
 struct rte_eth_dev_sriov {
@@ -2393,7 +2451,23 @@ rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
 	struct rte_eth_dev *dev;
 
 	dev = &rte_eth_devices[port_id];
+
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
 	return (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts, nb_pkts);
+#else
+	nb_pkts = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts,
+			nb_pkts);
+	struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+
+	if (unlikely(cb != NULL)) {
+		do {
+			nb_pkts = cb->fn(port_id, queue_id, rx_pkts, nb_pkts,
+					cb->param);
+			cb = cb->next;
+		} while (cb != NULL);
+	}
+	return nb_pkts;
+#endif
 }
 #endif
 
@@ -2520,6 +2594,17 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
 	struct rte_eth_dev *dev;
 
 	dev = &rte_eth_devices[port_id];
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+	struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+
+	if (unlikely(cb != NULL)) {
+		do {
+			nb_pkts = cb->fn(port_id, queue_id, tx_pkts, nb_pkts,
+					cb->param);
+			cb = cb->next;
+		} while (cb != NULL);
+	}
+#endif
 	return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
 }
 #endif
@@ -3667,6 +3752,123 @@ int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_ty
 int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
 			enum rte_filter_op filter_op, void *arg);
 
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+/**
+ * Add a callback to be called on packet RX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ *   The callback function
+ * @param user_param
+ *   A generic pointer parameter which will be passed to each invocation of the
+ *   callback function on this port and queue.
+ *
+ * @return
+ *   NULL on error.
+ *   On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rxtx_callback_fn fn, void *user_param);
+
+/**
+ * Add a callback to be called on packet TX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets sent on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_tx_callback().
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ *   The callback function
+ * @param user_param
+ *   A generic pointer parameter which will be passed to each invocation of the
+ *   callback function on this port and queue.
+ *
+ * @return
+ *   NULL on error.
+ *   On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+		rte_rxtx_callback_fn fn, void *user_param);
+
+/**
+ * Remove an RX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_rx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ *  - Immediately - if the port is stopped, or the user knows that no
+ *    callbacks are in flight e.g. if called from the thread doing RX/TX
+ *    on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ *   in-flight callbacks to complete.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ *   User supplied callback created via rte_eth_add_rx_callback().
+ *
+ * @return
+ *   - 0: Success. Callback was removed.
+ *   - -EINVAL: The port_id or the queue_id is out of range, or the callback is
+ *              NULL or not found for the port/queue.
+ */
+int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Remove a TX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_tx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ *  - Immediately - if the port is stopped, or the user knows that no
+ *    callbacks are in flight e.g. if called from the thread doing RX/TX
+ *    on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ *   in-flight callbacks to complete.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ *   User supplied callback created via rte_eth_add_tx_callback().
+ *
+ * @return
+ *   - 0: Success. Callback was removed.
+ *   - -EINVAL: The port_id or the queue_id is out of range, or the callback is
+ *              NULL or not found for the port/queue.
+ */
+int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+		struct rte_eth_rxtx_callback *user_cb);
+
+#endif /* RTE_ETHDEV_RXTX_CALLBACKS */
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 7316530..3227cda 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -2,6 +2,8 @@ DPDK_2.0 {
 	global:
 
 	_rte_eth_dev_callback_process;
+	rte_eth_add_rx_callback;
+	rte_eth_add_tx_callback;
 	rte_eth_allmulticast_disable;
 	rte_eth_allmulticast_enable;
 	rte_eth_allmulticast_get;
@@ -96,6 +98,8 @@ DPDK_2.0 {
 	rte_eth_promiscuous_disable;
 	rte_eth_promiscuous_enable;
 	rte_eth_promiscuous_get;
+	rte_eth_remove_rx_callback;
+	rte_eth_remove_tx_callback;
 	rte_eth_rx_burst;
 	rte_eth_rx_descriptor_done;
 	rte_eth_rx_queue_count;
-- 
1.7.4.1

  parent reply	other threads:[~2015-02-20 17:03 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22 16:47 [dpdk-dev] [PATCH RFC 0/3] DPDK ethdev " Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 1/3] ethdev: rename callbacks field to intr_cbs Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 2/3] ethdev: Add in data rxtx callback support Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 3/3] examples: example showing use of callbacks Bruce Richardson
2014-12-22 17:02 ` [dpdk-dev] [PATCH RFC 0/3] DPDK ethdev callback support Thomas Monjalon
2014-12-22 17:33   ` Bruce Richardson
2014-12-22 17:47     ` Neil Horman
2014-12-23  9:28       ` Bruce Richardson
2014-12-23 13:09         ` Neil Horman
2014-12-23 14:09           ` Bruce Richardson
2015-01-05 16:17     ` Bruce Richardson
2014-12-22 18:31 ` Stephen Hemminger
2014-12-23  9:29   ` Bruce Richardson
2014-12-23  4:23 ` Vithal S Mohare
2014-12-23  9:30   ` Bruce Richardson
2014-12-23  9:37     ` Vithal S Mohare
2014-12-24  1:43       ` Zhang, Helin
2014-12-24  5:06 ` Qiu, Michael
2015-02-12 19:57 ` [dpdk-dev] [PATCH " John McNamara
2015-02-12 19:57   ` [dpdk-dev] [PATCH 1/3] ethdev: rename callbacks field to intr_cbs John McNamara
2015-02-12 19:57   ` [dpdk-dev] [PATCH 2/3] ethdev: Add in data rxtx callback support John McNamara
2015-02-12 21:12     ` Neil Horman
2015-02-12 19:57   ` [dpdk-dev] [PATCH 3/3] examples: example showing use of callbacks John McNamara
2015-02-13 14:54   ` [dpdk-dev] [PATCH 0/3] DPDK ethdev callback support Declan Doherty
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 0/4] " John McNamara
2015-02-13 15:39   ` [dpdk-dev] [PATCH v2 1/4] ethdev: rename callbacks field to intr_cbs John McNamara
2015-02-13 16:06     ` Thomas Monjalon
2015-02-13 16:52       ` Thomas Monjalon
2015-02-13 15:39   ` [dpdk-dev] [PATCH v2 2/4] ethdev: Add in data rxtx callback support John McNamara
2015-02-13 16:33     ` Thomas Monjalon
2015-02-13 17:49       ` Bruce Richardson
2015-02-13 15:39   ` [dpdk-dev] [PATCH v2 3/4] examples: example showing use of callbacks John McNamara
2015-02-13 16:02     ` Thomas Monjalon
2015-02-16 14:33     ` Olivier MATZ
2015-02-16 15:16       ` Bruce Richardson
2015-02-16 17:34         ` Thomas Monjalon
2015-02-17 12:17           ` Declan Doherty
2015-02-17 12:25           ` Bruce Richardson
2015-02-17 13:28             ` Olivier MATZ
2015-02-17 13:50               ` Bruce Richardson
2015-02-17 15:49                 ` Neil Horman
2015-02-17 16:00                   ` Bruce Richardson
2015-02-17 16:08                     ` Neil Horman
2015-02-17 16:15                       ` Bruce Richardson
2015-02-17 19:27                         ` Neil Horman
2015-02-17 15:32             ` Thomas Monjalon
2015-02-17 15:58               ` Bruce Richardson
2015-02-13 15:39   ` [dpdk-dev] [PATCH v2 4/4] abi: Added rxtx callback functions to ABI versioning John McNamara
2015-02-13 15:59     ` Thomas Monjalon
2015-02-13 15:48   ` [dpdk-dev] [PATCH v2 0/4] DPDK ethdev callback support Declan Doherty
2015-02-18 17:42 ` [dpdk-dev] [PATCH v3 0/3] " John McNamara
2015-02-18 17:42   ` [dpdk-dev] [PATCH v3 1/3] ethdev: Rename callbacks field to link_intr_cbs John McNamara
2015-02-18 17:42   ` [dpdk-dev] [PATCH v3 2/3] ethdev: Add rxtx callback support John McNamara
2015-02-18 18:19     ` Thomas Monjalon
2015-02-19  9:33       ` Mcnamara, John
2015-02-18 17:42   ` [dpdk-dev] [PATCH v3 3/3] examples: example showing use of callbacks John McNamara
2015-02-19 17:56   ` [dpdk-dev] [PATCH v4 0/3] DPDK ethdev callback support John McNamara
2015-02-19 17:56     ` [dpdk-dev] [PATCH v4 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-19 17:56     ` [dpdk-dev] [PATCH v4 2/3] ethdev: add optional rxtx callback support John McNamara
2015-02-20 10:06       ` Bruce Richardson
2015-02-20 10:31         ` Thomas Monjalon
2015-02-19 17:56     ` [dpdk-dev] [PATCH v4 3/3] examples: example showing use of callbacks John McNamara
2015-02-20 17:03   ` [dpdk-dev] [PATCH v5 0/3] DPDK ethdev callback support John McNamara
2015-02-20 17:03     ` [dpdk-dev] [PATCH v5 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-20 17:03     ` John McNamara [this message]
2015-02-23 15:11       ` [dpdk-dev] [PATCH v5 2/3] ethdev: add optional rxtx callback support Thomas Monjalon
2015-02-23 17:27         ` Mcnamara, John
2015-02-20 17:03     ` [dpdk-dev] [PATCH v5 3/3] examples: example showing use of callbacks John McNamara
2015-02-23 18:30   ` [dpdk-dev] [PATCH v6 0/3] DPDK ethdev callback support John McNamara
2015-02-23 18:30     ` [dpdk-dev] [PATCH v6 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-23 18:30     ` [dpdk-dev] [PATCH v6 2/3] ethdev: add optional rxtx callback support John McNamara
2015-02-23 18:30     ` [dpdk-dev] [PATCH v6 3/3] examples: example showing use of callbacks John McNamara
2015-02-23 23:39     ` [dpdk-dev] [PATCH v6 0/3] DPDK ethdev callback support Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424451827-32293-3-git-send-email-john.mcnamara@intel.com \
    --to=john.mcnamara@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).