From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v12] testpmd: Add port hotplug support
Date: Mon, 23 Feb 2015 21:46:04 +0900 [thread overview]
Message-ID: <1424695564-3913-16-git-send-email-mukawa@igel.co.jp> (raw)
In-Reply-To: <1424695564-3913-1-git-send-email-mukawa@igel.co.jp>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
v7:
- Fix doc.
(Thanks to Iremonger, Bernard)
- Fix port checking implementation of star_port();
(Thanks to Qiu, Michael)
v5:
- Add testpmd documentation.
(Thanks to Iremonger, Bernard)
v4:
- Fix strings of command help.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
app/test-pmd/cmdline.c | 137 +++++++++++++++----
app/test-pmd/config.c | 102 ++++++++------
app/test-pmd/parameters.c | 22 ++-
app/test-pmd/testpmd.c | 199 +++++++++++++++++++++-------
app/test-pmd/testpmd.h | 18 ++-
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 57 ++++++++
6 files changed, 409 insertions(+), 126 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index c6a1627..b78c659 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -513,6 +513,12 @@ static void cmd_help_long_parsed(void *parsed_result,
"port close (port_id|all)\n"
" Close all ports or port_id.\n\n"
+ "port attach (ident)\n"
+ " Attach physical or virtual dev by pci address or virtual device name\n\n"
+
+ "port detach (port_id)\n"
+ " Detach physical or virtual dev by port_id\n\n"
+
"port config (port_id|all)"
" speed (10|100|1000|10000|40000|auto)"
" duplex (half|full|auto)\n"
@@ -793,6 +799,89 @@ cmdline_parse_inst_t cmd_operate_specific_port = {
},
};
+/* *** attach a specified port *** */
+struct cmd_operate_attach_port_result {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t keyword;
+ cmdline_fixed_string_t identifier;
+};
+
+static void cmd_operate_attach_port_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_operate_attach_port_result *res = parsed_result;
+
+ if (!strcmp(res->keyword, "attach"))
+ attach_port(res->identifier);
+ else
+ printf("Unknown parameter\n");
+}
+
+cmdline_parse_token_string_t cmd_operate_attach_port_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+ port, "port");
+cmdline_parse_token_string_t cmd_operate_attach_port_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+ keyword, "attach");
+cmdline_parse_token_string_t cmd_operate_attach_port_identifier =
+ TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+ identifier, NULL);
+
+cmdline_parse_inst_t cmd_operate_attach_port = {
+ .f = cmd_operate_attach_port_parsed,
+ .data = NULL,
+ .help_str = "port attach identifier, "
+ "identifier: pci address or virtual dev name",
+ .tokens = {
+ (void *)&cmd_operate_attach_port_port,
+ (void *)&cmd_operate_attach_port_keyword,
+ (void *)&cmd_operate_attach_port_identifier,
+ NULL,
+ },
+};
+
+/* *** detach a specified port *** */
+struct cmd_operate_detach_port_result {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t keyword;
+ uint8_t port_id;
+};
+
+static void cmd_operate_detach_port_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_operate_detach_port_result *res = parsed_result;
+
+ if (!strcmp(res->keyword, "detach"))
+ detach_port(res->port_id);
+ else
+ printf("Unknown parameter\n");
+}
+
+cmdline_parse_token_string_t cmd_operate_detach_port_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_operate_detach_port_result,
+ port, "port");
+cmdline_parse_token_string_t cmd_operate_detach_port_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_operate_detach_port_result,
+ keyword, "detach");
+cmdline_parse_token_num_t cmd_operate_detach_port_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_operate_detach_port_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_operate_detach_port = {
+ .f = cmd_operate_detach_port_parsed,
+ .data = NULL,
+ .help_str = "port detach port_id",
+ .tokens = {
+ (void *)&cmd_operate_detach_port_port,
+ (void *)&cmd_operate_detach_port_keyword,
+ (void *)&cmd_operate_detach_port_port_id,
+ NULL,
+ },
+};
+
/* *** configure speed for all ports *** */
struct cmd_config_speed_all {
cmdline_fixed_string_t port;
@@ -847,7 +936,7 @@ cmd_config_speed_all_parsed(void *parsed_result,
return;
}
- for (pid = 0; pid < nb_ports; pid++) {
+ FOREACH_PORT(pid, ports) {
ports[pid].dev_conf.link_speed = link_speed;
ports[pid].dev_conf.link_duplex = link_duplex;
}
@@ -915,10 +1004,8 @@ cmd_config_speed_specific_parsed(void *parsed_result,
return;
}
- if (res->id >= nb_ports) {
- printf("Port id %d must be less than %d\n", res->id, nb_ports);
+ if (port_id_is_invalid(res->id, ENABLED_WARN))
return;
- }
if (!strcmp(res->value1, "10"))
link_speed = ETH_LINK_SPEED_10;
@@ -1489,7 +1576,7 @@ cmd_config_rxtx_queue_parsed(void *parsed_result,
return;
}
- if (port_id_is_invalid(res->portid))
+ if (port_id_is_invalid(res->portid, ENABLED_WARN))
return;
if (port_is_started(res->portid) != 1) {
@@ -2889,7 +2976,7 @@ cmd_csum_parsed(void *parsed_result,
int hw = 0;
uint16_t mask = 0;
- if (port_id_is_invalid(res->port_id)) {
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN)) {
printf("invalid port %d\n", res->port_id);
return;
}
@@ -2981,10 +3068,8 @@ cmd_csum_tunnel_parsed(void *parsed_result,
{
struct cmd_csum_tunnel_result *res = parsed_result;
- if (port_id_is_invalid(res->port_id)) {
- printf("invalid port %d\n", res->port_id);
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
- }
if (!strcmp(res->onoff, "on"))
ports[res->port_id].tx_ol_flags |=
@@ -3039,7 +3124,7 @@ cmd_tso_set_parsed(void *parsed_result,
struct cmd_tso_set_result *res = parsed_result;
struct rte_eth_dev_info dev_info;
- if (port_id_is_invalid(res->port_id))
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
if (!strcmp(res->mode, "set"))
@@ -4015,10 +4100,8 @@ static void cmd_set_bond_mac_addr_parsed(void *parsed_result,
struct cmd_set_bond_mac_addr_result *res = parsed_result;
int ret;
- if (res->port_num >= nb_ports) {
- printf("Port id %d must be less than %d\n", res->port_num, nb_ports);
+ if (port_id_is_invalid(res->port_num, ENABLED_WARN))
return;
- }
ret = rte_eth_bond_mac_address_set(res->port_num, &res->address);
@@ -4255,7 +4338,7 @@ static void cmd_set_promisc_mode_parsed(void *parsed_result,
/* all ports */
if (allports) {
- for (i = 0; i < nb_ports; i++) {
+ FOREACH_PORT(i, ports) {
if (enable)
rte_eth_promiscuous_enable(i);
else
@@ -4335,7 +4418,7 @@ static void cmd_set_allmulti_mode_parsed(void *parsed_result,
/* all ports */
if (allports) {
- for (i = 0; i < nb_ports; i++) {
+ FOREACH_PORT(i, ports) {
if (enable)
rte_eth_allmulticast_enable(i);
else
@@ -5023,25 +5106,25 @@ static void cmd_showportall_parsed(void *parsed_result,
struct cmd_showportall_result *res = parsed_result;
if (!strcmp(res->show, "clear")) {
if (!strcmp(res->what, "stats"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
nic_stats_clear(i);
else if (!strcmp(res->what, "xstats"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
nic_xstats_clear(i);
} else if (!strcmp(res->what, "info"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
port_infos_display(i);
else if (!strcmp(res->what, "stats"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
nic_stats_display(i);
else if (!strcmp(res->what, "xstats"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
nic_xstats_display(i);
else if (!strcmp(res->what, "fdir"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
fdir_get_infos(i);
else if (!strcmp(res->what, "stat_qmap"))
- for (i = 0; i < nb_ports; i++)
+ FOREACH_PORT(i, ports)
nic_stats_mapping_display(i);
}
@@ -8685,6 +8768,8 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_set_qmap,
(cmdline_parse_inst_t *)&cmd_operate_port,
(cmdline_parse_inst_t *)&cmd_operate_specific_port,
+ (cmdline_parse_inst_t *)&cmd_operate_attach_port,
+ (cmdline_parse_inst_t *)&cmd_operate_detach_port,
(cmdline_parse_inst_t *)&cmd_config_speed_all,
(cmdline_parse_inst_t *)&cmd_config_speed_specific,
(cmdline_parse_inst_t *)&cmd_config_rx_tx,
@@ -8756,7 +8841,7 @@ prompt(void)
static void
cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue)
{
- if (id < nb_ports) {
+ if (!port_id_is_invalid(id, DISABLED_WARN)) {
/* check if need_reconfig has been set to 1 */
if (ports[id].need_reconfig == 0)
ports[id].need_reconfig = dev;
@@ -8766,7 +8851,7 @@ cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue)
} else {
portid_t pid;
- for (pid = 0; pid < nb_ports; pid++) {
+ FOREACH_PORT(pid, ports) {
/* check if need_reconfig has been set to 1 */
if (ports[pid].need_reconfig == 0)
ports[pid].need_reconfig = dev;
@@ -8784,10 +8869,8 @@ bypass_is_supported(portid_t port_id)
struct rte_port *port;
struct rte_pci_id *pci_id;
- if (port_id >= nb_ports) {
- printf("\tPort id must be less than %d.\n", nb_ports);
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return 0;
- }
/* Get the device id. */
port = &ports[port_id];
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index d436ce8..49be819 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -112,11 +112,15 @@ nic_stats_display(portid_t port_id)
struct rte_eth_stats stats;
struct rte_port *port = &ports[port_id];
uint8_t i;
+ portid_t pid;
static const char *nic_stats_border = "########################";
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return;
}
rte_eth_stats_get(port_id, &stats);
@@ -189,8 +193,13 @@ nic_stats_display(portid_t port_id)
void
nic_stats_clear(portid_t port_id)
{
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ portid_t pid;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return;
}
rte_eth_stats_reset(port_id);
@@ -237,11 +246,15 @@ nic_stats_mapping_display(portid_t port_id)
{
struct rte_port *port = &ports[port_id];
uint16_t i;
+ portid_t pid;
static const char *nic_stats_mapping_border = "########################";
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return;
}
@@ -290,9 +303,13 @@ port_infos_display(portid_t port_id)
int vlan_offload;
struct rte_mempool * mp;
static const char *info_border = "*********************";
+ portid_t pid;
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return;
}
port = &ports[port_id];
@@ -365,11 +382,14 @@ port_infos_display(portid_t port_id)
}
int
-port_id_is_invalid(portid_t port_id)
+port_id_is_invalid(portid_t port_id, enum print_warning warning)
{
- if (port_id < nb_ports)
+ if (ports[port_id].enabled)
return 0;
- printf("Invalid port %d (must be < nb_ports=%d)\n", port_id, nb_ports);
+
+ if (warning == ENABLED_WARN)
+ printf("Invalid port %d\n", port_id);
+
return 1;
}
@@ -428,7 +448,7 @@ port_reg_bit_display(portid_t port_id, uint32_t reg_off, uint8_t bit_x)
uint32_t reg_v;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -447,7 +467,7 @@ port_reg_bit_field_display(portid_t port_id, uint32_t reg_off,
uint8_t l_bit;
uint8_t h_bit;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -474,7 +494,7 @@ port_reg_display(portid_t port_id, uint32_t reg_off)
{
uint32_t reg_v;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -488,7 +508,7 @@ port_reg_bit_set(portid_t port_id, uint32_t reg_off, uint8_t bit_pos,
{
uint32_t reg_v;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -516,7 +536,7 @@ port_reg_bit_field_set(portid_t port_id, uint32_t reg_off,
uint8_t l_bit;
uint8_t h_bit;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -550,7 +570,7 @@ port_reg_bit_field_set(portid_t port_id, uint32_t reg_off,
void
port_reg_set(portid_t port_id, uint32_t reg_off, uint32_t reg_v)
{
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (port_reg_off_is_invalid(port_id, reg_off))
return;
@@ -563,7 +583,7 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
diag = rte_eth_dev_set_mtu(port_id, mtu);
if (diag == 0)
@@ -726,7 +746,7 @@ rx_ring_desc_display(portid_t port_id, queueid_t rxq_id, uint16_t rxd_id)
{
const struct rte_memzone *rx_mz;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (rx_queue_id_is_invalid(rxq_id))
return;
@@ -743,7 +763,7 @@ tx_ring_desc_display(portid_t port_id, queueid_t txq_id, uint16_t txd_id)
{
const struct rte_memzone *tx_mz;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (tx_queue_id_is_invalid(txq_id))
return;
@@ -804,7 +824,7 @@ port_rss_reta_info(portid_t port_id,
uint16_t i, idx, shift;
int ret;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
ret = rte_eth_dev_rss_reta_query(port_id, reta_conf, nb_entries);
@@ -859,7 +879,7 @@ port_rss_hash_conf_show(portid_t port_id, int show_rss_key)
uint8_t i;
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
/* Get RSS hash key if asked to display it */
rss_conf.rss_key = (show_rss_key) ? rss_key : NULL;
@@ -1423,12 +1443,8 @@ set_fwd_ports_list(unsigned int *portlist, unsigned int nb_pt)
again:
for (i = 0; i < nb_pt; i++) {
port_id = (portid_t) portlist[i];
- if (port_id >= nb_ports) {
- printf("Invalid port id %u >= %u\n",
- (unsigned int) port_id,
- (unsigned int) nb_ports);
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
- }
if (record_now)
fwd_ports_ids[i] = port_id;
}
@@ -1586,7 +1602,7 @@ vlan_extend_set(portid_t port_id, int on)
int diag;
int vlan_offload;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
@@ -1608,7 +1624,7 @@ rx_vlan_strip_set(portid_t port_id, int on)
int diag;
int vlan_offload;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
@@ -1629,7 +1645,7 @@ rx_vlan_strip_set_on_queue(portid_t port_id, uint16_t queue_id, int on)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
diag = rte_eth_dev_set_vlan_strip_on_queue(port_id, queue_id, on);
@@ -1644,7 +1660,7 @@ rx_vlan_filter_set(portid_t port_id, int on)
int diag;
int vlan_offload;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
@@ -1665,7 +1681,7 @@ rx_vft_set(portid_t port_id, uint16_t vlan_id, int on)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (vlan_id_is_invalid(vlan_id))
return;
@@ -1682,7 +1698,7 @@ rx_vlan_all_filter_set(portid_t port_id, int on)
{
uint16_t vlan_id;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
for (vlan_id = 0; vlan_id < 4096; vlan_id++)
rx_vft_set(port_id, vlan_id, on);
@@ -1692,7 +1708,7 @@ void
vlan_tpid_set(portid_t port_id, uint16_t tp_id)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
diag = rte_eth_dev_set_vlan_ether_type(port_id, tp_id);
@@ -1707,7 +1723,7 @@ vlan_tpid_set(portid_t port_id, uint16_t tp_id)
void
tx_vlan_set(portid_t port_id, uint16_t vlan_id)
{
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (vlan_id_is_invalid(vlan_id))
return;
@@ -1718,7 +1734,7 @@ tx_vlan_set(portid_t port_id, uint16_t vlan_id)
void
tx_vlan_reset(portid_t port_id)
{
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
ports[port_id].tx_ol_flags &= ~TESTPMD_TX_OFFLOAD_INSERT_VLAN;
}
@@ -1726,7 +1742,7 @@ tx_vlan_reset(portid_t port_id)
void
tx_vlan_pvid_set(portid_t port_id, uint16_t vlan_id, int on)
{
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
rte_eth_dev_set_vlan_pvid(port_id, vlan_id, on);
@@ -1738,7 +1754,7 @@ set_qmap(portid_t port_id, uint8_t is_rx, uint16_t queue_id, uint8_t map_value)
uint16_t i;
uint8_t existing_mapping_found = 0;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (is_rx ? (rx_queue_id_is_invalid(queue_id)) : (tx_queue_id_is_invalid(queue_id)))
@@ -1904,7 +1920,7 @@ fdir_get_infos(portid_t port_id)
static const char *fdir_stats_border = "########################";
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
ret = rte_eth_dev_filter_supported(port_id, RTE_ETH_FILTER_FDIR);
if (ret < 0) {
@@ -2030,7 +2046,7 @@ set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (is_rx)
diag = rte_eth_dev_set_vf_rx(port_id,vf,on);
@@ -2052,7 +2068,7 @@ set_vf_rx_vlan(portid_t port_id, uint16_t vlan_id, uint64_t vf_mask, uint8_t on)
{
int diag;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (vlan_id_is_invalid(vlan_id))
return;
@@ -2069,7 +2085,7 @@ set_queue_rate_limit(portid_t port_id, uint16_t queue_idx, uint16_t rate)
int diag;
struct rte_eth_link link;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return 1;
rte_eth_link_get_nowait(port_id, &link);
if (rate > link.link_speed) {
@@ -2094,7 +2110,7 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk)
if (q_msk == 0)
return 0;
- if (port_id_is_invalid(port_id))
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
return 1;
rte_eth_link_get_nowait(port_id, &link);
if (rate > link.link_speed) {
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 473f824..fa5f2a8 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -366,6 +366,7 @@ parse_portnuma_config(const char *q_arg)
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
+ portid_t pid;
/* reset from value set at definition */
while ((p = strchr(p0,'(')) != NULL) {
@@ -387,8 +388,11 @@ parse_portnuma_config(const char *q_arg)
return -1;
}
port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
@@ -419,6 +423,7 @@ parse_ringnuma_config(const char *q_arg)
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
+ portid_t pid;
#define RX_RING_ONLY 0x1
#define TX_RING_ONLY 0x2
#define RXTX_RING 0x3
@@ -443,8 +448,11 @@ parse_ringnuma_config(const char *q_arg)
return -1;
}
port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ printf("Valid port range is [0");
+ FOREACH_PORT(pid, ports)
+ printf(", %d", pid);
+ printf("]\n");
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
@@ -615,12 +623,12 @@ launch_args_parse(int argc, char** argv)
#endif
if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
n = atoi(optarg);
- if (n > 0 && n <= nb_ports)
+ if (n > 0 &&
+ !port_id_is_invalid(n, DISABLED_WARN))
nb_fwd_ports = (uint8_t) n;
else
rte_exit(EXIT_FAILURE,
- "nb-ports should be > 0 and <= %d\n",
- nb_ports);
+ "Invalid port %d\n", n);
}
if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
n = atoi(optarg);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 605163b..44bb8b3 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -71,6 +71,7 @@
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
+#include <rte_dev.h>
#include <rte_string_fns.h>
#ifdef RTE_LIBRTE_PMD_XENVIRT
#include <rte_eth_xenvirt.h>
@@ -315,7 +316,7 @@ uint16_t nb_rx_queue_stats_mappings = 0;
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
-static void check_all_ports_link_status(uint8_t port_num, uint32_t port_mask);
+static void check_all_ports_link_status(uint32_t port_mask);
/*
* Check if all the ports are started.
@@ -324,6 +325,20 @@ static void check_all_ports_link_status(uint8_t port_num, uint32_t port_mask);
static int all_ports_started(void);
/*
+ * Find next enabled port
+ */
+portid_t
+find_next_port(portid_t p, struct rte_port *ports, int size)
+{
+ if (ports == NULL)
+ rte_exit(-EINVAL, "failed to find a next port id\n");
+
+ while ((ports[p].enabled == 0) && (p < size))
+ p++;
+ return p;
+}
+
+/*
* Setup default configuration.
*/
static void
@@ -552,7 +567,8 @@ init_config(void)
+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
if (!numa_support)
- nb_mbuf_per_pool = (nb_mbuf_per_pool * nb_ports);
+ nb_mbuf_per_pool =
+ (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
}
if (!numa_support) {
@@ -565,14 +581,19 @@ init_config(void)
/* Configuration of Ethernet ports. */
ports = rte_zmalloc("testpmd: ports",
- sizeof(struct rte_port) * nb_ports,
+ sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
RTE_CACHE_LINE_SIZE);
if (ports == NULL) {
- rte_exit(EXIT_FAILURE, "rte_zmalloc(%d struct rte_port) "
- "failed\n", nb_ports);
+ rte_exit(EXIT_FAILURE,
+ "rte_zmalloc(%d struct rte_port) failed\n",
+ RTE_MAX_ETHPORTS);
}
- for (pid = 0; pid < nb_ports; pid++) {
+ /* enabled allocated ports */
+ for (pid = 0; pid < nb_ports; pid++)
+ ports[pid].enabled = 1;
+
+ FOREACH_PORT(pid, ports) {
port = &ports[pid];
rte_eth_dev_info_get(pid, &port->dev_info);
@@ -602,8 +623,7 @@ init_config(void)
nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
for (i = 0; i < MAX_SOCKET; i++) {
- nb_mbuf = (nb_mbuf_per_pool *
- port_per_socket[i]);
+ nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
if (nb_mbuf)
mbuf_pool_create(mbuf_data_size,
nb_mbuf,i);
@@ -635,14 +655,6 @@ reconfig(portid_t new_port_id, unsigned socket_id)
struct rte_port *port;
/* Reconfiguration of Ethernet ports. */
- ports = rte_realloc(ports,
- sizeof(struct rte_port) * nb_ports,
- RTE_CACHE_LINE_SIZE);
- if (ports == NULL) {
- rte_exit(EXIT_FAILURE, "rte_realloc(%d struct rte_port) failed\n",
- nb_ports);
- }
-
port = &ports[new_port_id];
rte_eth_dev_info_get(new_port_id, &port->dev_info);
@@ -663,7 +675,7 @@ init_fwd_streams(void)
streamid_t sm_id, nb_fwd_streams_new;
/* set socket id according to numa or not */
- for (pid = 0; pid < nb_ports; pid++) {
+ FOREACH_PORT(pid, ports) {
port = &ports[pid];
if (nb_rxq > port->dev_info.max_rx_queues) {
printf("Fail: nb_rxq(%d) is greater than "
@@ -1264,7 +1276,7 @@ all_ports_started(void)
portid_t pi;
struct rte_port *port;
- for (pi = 0; pi < nb_ports; pi++) {
+ FOREACH_PORT(pi, ports) {
port = &ports[pi];
/* Check if there is a port which is not started */
if (port->port_status != RTE_PORT_STARTED)
@@ -1276,6 +1288,45 @@ all_ports_started(void)
}
int
+all_ports_stopped(void)
+{
+ portid_t pi;
+ struct rte_port *port;
+
+ FOREACH_PORT(pi, ports) {
+ port = &ports[pi];
+ if (port->port_status != RTE_PORT_STOPPED)
+ return 0;
+ }
+
+ return 1;
+}
+
+int
+port_is_started(portid_t port_id)
+{
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return 0;
+
+ if (ports[port_id].port_status != RTE_PORT_STARTED)
+ return 0;
+
+ return 1;
+}
+
+static int
+port_is_closed(portid_t port_id)
+{
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return 0;
+
+ if (ports[port_id].port_status != RTE_PORT_CLOSED)
+ return 0;
+
+ return 1;
+}
+
+int
start_port(portid_t pid)
{
int diag, need_check_link_status = 0;
@@ -1296,8 +1347,8 @@ start_port(portid_t pid)
if(dcb_config)
dcb_test = 1;
- for (pi = 0; pi < nb_ports; pi++) {
- if (pid < nb_ports && pid != pi)
+ FOREACH_PORT(pi, ports) {
+ if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
port = &ports[pi];
@@ -1421,7 +1472,7 @@ start_port(portid_t pid)
}
if (need_check_link_status && !no_link_check)
- check_all_ports_link_status(nb_ports, RTE_PORT_ALL);
+ check_all_ports_link_status(RTE_PORT_ALL);
else
printf("Please stop the ports first\n");
@@ -1446,8 +1497,8 @@ stop_port(portid_t pid)
}
printf("Stopping ports...\n");
- for (pi = 0; pi < nb_ports; pi++) {
- if (pid < nb_ports && pid != pi)
+ FOREACH_PORT(pi, ports) {
+ if (!port_id_is_invalid(pid, DISABLED_WARN) && pid != pi)
continue;
port = &ports[pi];
@@ -1463,7 +1514,7 @@ stop_port(portid_t pid)
need_check_link_status = 1;
}
if (need_check_link_status && !no_link_check)
- check_all_ports_link_status(nb_ports, RTE_PORT_ALL);
+ check_all_ports_link_status(RTE_PORT_ALL);
printf("Done\n");
}
@@ -1481,8 +1532,8 @@ close_port(portid_t pid)
printf("Closing ports...\n");
- for (pi = 0; pi < nb_ports; pi++) {
- if (pid < nb_ports && pid != pi)
+ FOREACH_PORT(pi, ports) {
+ if (!port_id_is_invalid(pid, DISABLED_WARN) && pid != pi)
continue;
port = &ports[pi];
@@ -1502,31 +1553,83 @@ close_port(portid_t pid)
printf("Done\n");
}
-int
-all_ports_stopped(void)
+void
+attach_port(char *identifier)
{
- portid_t pi;
- struct rte_port *port;
+ portid_t i, j, pi = 0;
- for (pi = 0; pi < nb_ports; pi++) {
- port = &ports[pi];
- if (port->port_status != RTE_PORT_STOPPED)
- return 0;
+ printf("Attaching a new port...\n");
+
+ if (identifier == NULL) {
+ printf("Invalid parameters are specified\n");
+ return;
}
- return 1;
+ if (test_done == 0) {
+ printf("Please stop forwarding first\n");
+ return;
+ }
+
+ if (rte_eal_dev_attach(identifier, &pi))
+ return;
+
+ ports[pi].enabled = 1;
+ reconfig(pi, rte_eth_dev_socket_id(pi));
+ rte_eth_promiscuous_enable(pi);
+
+ nb_ports = rte_eth_dev_count();
+
+ /* set_default_fwd_ports_config(); */
+ bzero(fwd_ports_ids, sizeof(fwd_ports_ids));
+ i = 0;
+ FOREACH_PORT(j, ports) {
+ fwd_ports_ids[i] = j;
+ i++;
+ }
+ nb_cfg_ports = nb_ports;
+ nb_fwd_ports++;
+
+ ports[pi].port_status = RTE_PORT_STOPPED;
+
+ printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
+ printf("Done\n");
}
-int
-port_is_started(portid_t port_id)
+void
+detach_port(uint8_t port_id)
{
- if (port_id_is_invalid(port_id))
- return -1;
+ portid_t i, pi = 0;
+ char name[RTE_ETH_NAME_MAX_LEN];
- if (ports[port_id].port_status != RTE_PORT_STARTED)
- return 0;
+ printf("Detaching a port...\n");
- return 1;
+ if (!port_is_closed(port_id)) {
+ printf("Please close port first\n");
+ return;
+ }
+
+ rte_eth_promiscuous_disable(port_id);
+
+ if (rte_eal_dev_detach(port_id, name))
+ return;
+
+ ports[port_id].enabled = 0;
+ nb_ports = rte_eth_dev_count();
+
+ /* set_default_fwd_ports_config(); */
+ bzero(fwd_ports_ids, sizeof(fwd_ports_ids));
+ i = 0;
+ FOREACH_PORT(pi, ports) {
+ fwd_ports_ids[i] = pi;
+ i++;
+ }
+ nb_cfg_ports = nb_ports;
+ nb_fwd_ports--;
+
+ printf("Port '%s' is detached. Now total ports is %d\n",
+ name, nb_ports);
+ printf("Done\n");
+ return;
}
void
@@ -1534,7 +1637,7 @@ pmd_test_exit(void)
{
portid_t pt_id;
- for (pt_id = 0; pt_id < nb_ports; pt_id++) {
+ FOREACH_PORT(pt_id, ports) {
printf("Stopping port %d...", pt_id);
fflush(stdout);
rte_eth_dev_close(pt_id);
@@ -1553,7 +1656,7 @@ struct pmd_test_command {
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
@@ -1564,7 +1667,7 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ FOREACH_PORT(portid, ports) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
@@ -1729,7 +1832,7 @@ init_port_config(void)
portid_t pid;
struct rte_port *port;
- for (pid = 0; pid < nb_ports; pid++) {
+ FOREACH_PORT(pid, ports) {
port = &ports[pid];
port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
@@ -1908,7 +2011,7 @@ main(int argc, char** argv)
nb_ports = (portid_t) rte_eth_dev_count();
if (nb_ports == 0)
- rte_exit(EXIT_FAILURE, "No probed ethernet device\n");
+ RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
set_def_fwd_config();
if (nb_lcores == 0)
@@ -1930,7 +2033,7 @@ main(int argc, char** argv)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
/* set all ports to promiscuous mode by default */
- for (port_id = 0; port_id < nb_ports; port_id++)
+ FOREACH_PORT(port_id, ports)
rte_eth_promiscuous_enable(port_id);
#ifdef RTE_LIBRTE_CMDLINE
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 126bef7..0d5a526 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -137,6 +137,7 @@ struct fwd_stream {
* The data structure associated with each port.
*/
struct rte_port {
+ uint8_t enabled; /**< Port enabled or not */
struct rte_eth_dev_info dev_info; /**< PCI info + driver name */
struct rte_eth_conf dev_conf; /**< Port configuration. */
struct ether_addr eth_addr; /**< Port ethernet address */
@@ -162,6 +163,14 @@ struct rte_port {
struct rte_eth_txconf tx_conf; /**< tx configuration */
};
+extern portid_t __rte_unused
+find_next_port(portid_t p, struct rte_port *ports, int size);
+
+#define FOREACH_PORT(p, ports) \
+ for (p = find_next_port(0, ports, RTE_MAX_ETHPORTS); \
+ p < RTE_MAX_ETHPORTS; \
+ p = find_next_port(p + 1, ports, RTE_MAX_ETHPORTS))
+
/**
* The data structure associated with each forwarding logical core.
* The logical cores are internally numbered by a core index from 0 to
@@ -522,6 +531,8 @@ int init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf);
int start_port(portid_t pid);
void stop_port(portid_t pid);
void close_port(portid_t pid);
+void attach_port(char *identifier);
+void detach_port(uint8_t port_id);
int all_ports_stopped(void);
int port_is_started(portid_t port_id);
void pmd_test_exit(void);
@@ -548,10 +559,15 @@ void get_syn_filter(uint8_t port_id);
void get_ethertype_filter(uint8_t port_id, uint16_t index);
void get_2tuple_filter(uint8_t port_id, uint16_t index);
void get_5tuple_filter(uint8_t port_id, uint16_t index);
-int port_id_is_invalid(portid_t port_id);
int rx_queue_id_is_invalid(queueid_t rxq_id);
int tx_queue_id_is_invalid(queueid_t txq_id);
+enum print_warning {
+ ENABLED_WARN = 0,
+ DISABLED_WARN
+};
+int port_id_is_invalid(portid_t port_id, enum print_warning warning);
+
/*
* Work-around of a compilation error with ICC on invocations of the
* rte_be_to_cpu_16() function.
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index afe1970..a99e14d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -807,6 +807,63 @@ The following sections show functions for configuring ports.
Port configuration changes only become active when forwarding is started/restarted.
+port attach
+~~~~~~~~~~~
+
+Attach a port specified by pci address or virtual device args.
+
+To attach a new pci device, the device should be recognized by kernel first.
+Then it should be moved under DPDK management.
+Finally the port can be attached to testpmd.
+On the other hand, to attach a port created by virtual device, above steps are not needed.
+
+port attach (identifier)
+
+For example, to attach a port whose pci address is 0000:02:00.0.
+
+.. code-block:: console
+
+ testpmd> port attach 0000:02:00.0
+ Attaching a new port...
+ ... snip ...
+ Port 0 is attached. Now total ports is 1
+ Done
+
+For example, to attach a port created by pcap PMD.
+
+.. code-block:: console
+
+ testpmd> port attach eth_pcap0,iface=eth0
+ Attaching a new port...
+ ... snip ...
+ Port 0 is attached. Now total ports is 1
+ Done
+
+In this case, identifier is "eth_pcap0,iface=eth0".
+This identifier format is the same as "--vdev" format of DPDK applications.
+
+port detach
+~~~~~~~~~~~
+
+Detach a specific port.
+
+Before detaching a port, the port should be closed.
+Also to remove a pci device completely from the system, first detach the port from testpmd.
+Then the device should be moved under kernel management.
+Finally the device can be removed using kernel pci hotplug functionality.
+On the other hand, to remove a port created by a virtual device, above steps are not needed.
+
+port detach (port_id)
+
+For example, to detach a port 0.
+
+.. code-block:: console
+
+ testpmd> port detach 0
+ Detaching a port...
+ ... snip ...
+ Done
+
port start
~~~~~~~~~~
--
1.9.1
next prev parent reply other threads:[~2015-02-23 12:47 UTC|newest]
Thread overview: 362+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1418106629-22227-2-git-send-email-mukawa@igel.co.j>
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 01/11] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049D7C19@IRSMSX108.ger.corp.intel.com>
2015-01-19 14:24 ` [dpdk-dev] FW: " Qiu, Michael
2015-01-20 2:02 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 02/11] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 03/11] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 04/11] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 05/11] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-21 2:40 ` Qiu, Michael
2015-01-21 9:02 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 06/11] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-20 9:23 ` Qiu, Michael
2015-01-21 0:17 ` Tetsuya Mukawa
2015-01-21 10:01 ` Tetsuya Mukawa
2015-01-22 8:12 ` Qiu, Michael
2015-01-22 10:15 ` Tetsuya Mukawa
2015-01-23 2:54 ` Qiu, Michael
2015-01-23 3:20 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 07/11] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-21 2:55 ` Qiu, Michael
2015-01-21 6:33 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 08/11] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 16:14 ` Iremonger, Bernard
2015-02-17 0:12 ` Thomas Monjalon
2015-02-17 3:09 ` Qiu, Michael
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 11:01 ` Iremonger, Bernard
2015-02-23 11:32 ` Tetsuya Mukawa
2015-02-23 11:39 ` Iremonger, Bernard
2015-02-23 11:40 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 13:29 ` Maxime Leroy
2015-02-24 4:48 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] testpmd: " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-20 10:14 ` Maxime Leroy
2015-02-20 10:32 ` Tetsuya Mukawa
2015-02-20 15:20 ` Maxime Leroy
2015-02-21 3:49 ` Tetsuya Mukawa
2015-02-21 12:49 ` Maxime Leroy
2015-02-22 3:04 ` Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] testpmd: " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 12:46 ` Tetsuya Mukawa [this message]
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-24 13:25 ` Maxime Leroy
2015-02-24 14:29 ` Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] testpmd: " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 11:21 ` Thomas Monjalon
2015-02-25 12:32 ` Tetsuya Mukawa
2015-02-25 14:00 ` Thomas Monjalon
2015-02-25 14:56 ` Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 09/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 10/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 11/13] eal/pci: Add vdev driver initialization and uninitialization functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 12/13] ethdev: Add rte_eth_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-03-02 19:03 ` Butler, Siobhan A
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] testpmd: " Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-26 18:49 ` De Lara Guarch, Pablo
2015-02-27 6:14 ` Tetsuya Mukawa
2015-02-27 23:32 ` Thomas Monjalon
2015-03-03 15:54 ` De Lara Guarch, Pablo
2015-03-05 6:23 ` Tetsuya Mukawa
2015-02-25 23:26 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Thomas Monjalon
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-16 16:15 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-16 16:17 ` Iremonger, Bernard
2015-02-17 0:36 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 0:31 ` Thomas Monjalon
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-18 6:10 ` Tetsuya Mukawa
2015-02-18 9:27 ` Iremonger, Bernard
2015-02-18 9:57 ` Thomas Monjalon
2015-02-18 10:03 ` Bruce Richardson
2015-02-18 10:58 ` Tetsuya Mukawa
2015-02-18 12:23 ` Bruce Richardson
2015-02-18 12:38 ` Tetsuya Mukawa
2015-02-18 12:33 ` Iremonger, Bernard
2015-02-18 12:41 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-16 16:19 ` Iremonger, Bernard
2015-02-17 0:44 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 1:02 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-18 10:26 ` Iremonger, Bernard
2015-02-18 10:32 ` Thomas Monjalon
2015-02-18 11:39 ` Iremonger, Bernard
2015-02-18 12:20 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-16 16:20 ` Iremonger, Bernard
2015-02-17 0:46 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-16 16:22 ` Iremonger, Bernard
2015-02-17 0:56 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-16 12:41 ` Neil Horman
2015-02-17 5:54 ` Tetsuya Mukawa
2015-02-16 16:23 ` Iremonger, Bernard
2015-02-17 1:04 ` Thomas Monjalon
2015-02-17 8:50 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-16 12:45 ` Neil Horman
2015-02-17 5:53 ` Tetsuya Mukawa
2015-02-16 16:25 ` Iremonger, Bernard
2015-02-17 1:11 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-18 1:09 ` Thomas Monjalon
2015-02-18 9:37 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-16 16:26 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-16 16:27 ` Iremonger, Bernard
2015-02-17 1:18 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-16 16:28 ` Iremonger, Bernard
2015-02-17 1:24 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-19 11:17 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-20 5:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-19 14:31 ` Iremonger, Bernard
2015-02-20 1:17 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-19 11:24 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-19 14:51 ` Iremonger, Bernard
2015-02-20 1:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-19 12:10 ` Thomas Monjalon
2015-02-19 13:30 ` Tetsuya Mukawa
2015-02-19 13:37 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:48 ` Thomas Monjalon
2015-02-17 8:51 ` Tetsuya Mukawa
2015-02-17 9:23 ` Thomas Monjalon
2015-02-17 10:26 ` Tetsuya Mukawa
2015-02-18 1:17 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-17 16:15 ` Maxime Leroy
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:25 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-16 16:32 ` Iremonger, Bernard
2015-02-16 5:13 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Qiu, Michael
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-16 16:36 ` Iremonger, Bernard
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] testpmd: " Tetsuya Mukawa
2015-02-16 16:35 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:52 ` Qiu, Michael
2015-02-09 15:16 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-09 13:10 ` Qiu, Michael
2015-02-10 15:08 ` Iremonger, Bernard
2015-02-11 2:51 ` Tetsuya Mukawa
2015-02-11 3:27 ` Qiu, Michael
2015-02-11 4:53 ` Tetsuya Mukawa
2015-02-11 4:57 ` Tetsuya Mukawa
2015-02-11 6:29 ` Qiu, Michael
2015-02-11 8:14 ` Tetsuya Mukawa
2015-02-11 12:13 ` Qiu, Michael
2015-02-12 1:44 ` Tetsuya Mukawa
2015-02-12 13:55 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-09 15:34 ` Iremonger, Bernard
2015-02-10 1:30 ` Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-09 13:44 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-09 15:03 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-03 2:37 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-03 2:35 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-03 5:05 ` Qiu, Michael
2015-02-03 8:00 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-02 5:42 ` Qiu, Michael
2015-02-02 6:22 ` Qiu, Michael
2015-02-03 1:28 ` Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] testpmd: " Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049DCAD2@IRSMSX108.ger.corp.intel.com>
2015-02-03 1:32 ` Tetsuya Mukawa
2015-02-03 10:03 ` Iremonger, Bernard
2015-02-03 10:31 ` Tetsuya Mukawa
[not found] ` <1688512.MY7Nexz1BF@xps13>
2015-02-03 1:34 ` Tetsuya Mukawa
2015-02-03 6:15 ` Qiu, Michael
2015-02-03 9:14 ` Qiu, Michael
2015-02-03 10:29 ` Tetsuya Mukawa
2015-02-04 1:44 ` Qiu, Michael
2015-02-05 1:37 ` Tetsuya Mukawa
2015-02-03 6:59 ` Qiu, Michael
2015-02-03 10:26 ` Tetsuya Mukawa
2015-02-03 13:03 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Iremonger, Bernard
2015-02-05 1:32 ` Tetsuya Mukawa
2015-02-03 18:35 ` Iremonger, Bernard
2015-02-05 1:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 09/11] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 10/11] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-21 3:49 ` Qiu, Michael
2015-01-21 6:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 11/11] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-19 13:15 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Qiu, Michael
2015-01-27 3:00 ` Qiu, Michael
2015-01-27 5:01 ` Tetsuya Mukawa
2015-01-27 5:50 ` Qiu, Michael
2015-01-27 7:24 ` Tetsuya Mukawa
2015-01-19 10:41 ` [dpdk-dev] [PATCH v4] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-19 10:42 ` [dpdk-dev] [PATCH v4] testpmd: " Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424695564-3913-16-git-send-email-mukawa@igel.co.jp \
--to=mukawa@igel.co.jp \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).