DPDK patches and discussions
 help / color / mirror / Atom feed
From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/2] doc: update programmers guide for uio_pci_generic
Date: Tue, 24 Feb 2015 16:27:40 +0000	[thread overview]
Message-ID: <1424795260-13793-3-git-send-email-bruce.richardson@intel.com> (raw)
In-Reply-To: <1424795260-13793-1-git-send-email-bruce.richardson@intel.com>

Since DPDK now has support for the in-tree uio_pci_generic driver,
update the programmers guide document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 doc/guides/prog_guide/env_abstraction_layer.rst                  | 8 ++++----
 doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst | 6 +++---
 doc/guides/prog_guide/kernel_nic_interface.rst                   | 2 +-
 doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst      | 8 ++++----
 doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst  | 2 +-
 5 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/doc/guides/prog_guide/env_abstraction_layer.rst b/doc/guides/prog_guide/env_abstraction_layer.rst
index 231e266..b5321c3 100644
--- a/doc/guides/prog_guide/env_abstraction_layer.rst
+++ b/doc/guides/prog_guide/env_abstraction_layer.rst
@@ -66,7 +66,7 @@ EAL in a Linux-userland Execution Environment
 ---------------------------------------------
 
 In a Linux user space environment, the DPDK application runs as a user-space application using the pthread library.
-PCI information about devices and address space is discovered through the /sys kernel interface and through a module called igb_uio.
+PCI information about devices and address space is discovered through the /sys kernel interface and through kernel modules such as uio_pci_generic, or igb_uio.
 Refer to the UIO: User-space drivers documentation in the Linux kernel. This memory is mmap'd in the application.
 
 The EAL performs physical memory allocation using mmap() in hugetlbfs (using huge page sizes to increase performance).
@@ -134,10 +134,10 @@ PCI Access
 ~~~~~~~~~~
 
 The EAL uses the /sys/bus/pci utilities provided by the kernel to scan the content on the PCI bus.
-
-To access PCI memory, a kernel module called igb_uio provides a /dev/uioX device file
+To access PCI memory, a kernel module called uio_pci_generic provides a /dev/uioX device file
+and resource files in /sys
 that can be mmap'd to obtain access to PCI address space from the application.
-It uses the uio kernel feature (userland driver).
+The DPDK-specific igb_uio module can also be used for this. Both drivers use the uio kernel feature (userland driver).
 
 Per-lcore and Shared Variables
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst b/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
index 1f1e04f..a0dd959 100644
--- a/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
+++ b/doc/guides/prog_guide/intel_dpdk_xen_based_packet_switch_sol.rst
@@ -306,12 +306,12 @@ Building and Running the Switching Backend
         Refer to the *DPDK Getting Started Guide* for more information on memory management in the DPDK.
         In the above command, 4 GB memory is reserved (2048 of 2 MB pages) for DPDK.
 
-#.  Load igb_uio and bind one Intel NIC controller to igb_uio:
+#.  Load uio_pci_generic and bind one Intel NIC controller to it:
 
     .. code-block:: console
 
-        insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-        python tools/dpdk_nic_bind.py -b igb_uio 0000:09:00:00.0
+        modprobe uio_pci_generic
+        python tools/dpdk_nic_bind.py -b uio_pci_generic 0000:09:00:00.0
 
     In this case, 0000:09:00.0 is the PCI address for the NIC controller.
 
diff --git a/doc/guides/prog_guide/kernel_nic_interface.rst b/doc/guides/prog_guide/kernel_nic_interface.rst
index 0276019..9ed7688 100644
--- a/doc/guides/prog_guide/kernel_nic_interface.rst
+++ b/doc/guides/prog_guide/kernel_nic_interface.rst
@@ -224,7 +224,7 @@ Otherwise, by default, KNI will not enable its backend support capability.
 
 Of course, as a prerequisite, the vhost/vhost-net kernel CONFIG should be chosen before compiling the kernel.
 
-#.  Compile the DPDK and insert igb_uio as normal.
+#.  Compile the DPDK and insert uio_pci_generic/igb_uio kernel modules as normal.
 
 #.  Insert the KNI kernel module:
 
diff --git a/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst b/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
index 86f4f60..b0a6250 100644
--- a/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
+++ b/doc/guides/prog_guide/poll_mode_drv_emulated_virtio_nic.rst
@@ -113,7 +113,7 @@ Host2VM communication example
 
         insmod rte_kni.ko
 
-    Other basic DPDK preparations like hugepage enabling, igb_uio port binding are not listed here.
+    Other basic DPDK preparations like hugepage enabling, uio port binding are not listed here.
     Please refer to the *DPDK Getting Started Guide* for detailed instructions.
 
 #.  Launch the kni user application:
@@ -154,7 +154,7 @@ Host2VM communication example
     In the above example, virtio port 0 in the guest VM will be associated with vEth0, which in turns corresponds to a physical port,
     which means received packets come from vEth0, and transmitted packets is sent to vEth0.
 
-#.  In the guest, bind the virtio device to the igb_uio kernel module and start the forwarding application.
+#.  In the guest, bind the virtio device to the uio_pci_generic kernel module and start the forwarding application.
     When the virtio port in guest bursts rx, it is getting packets from the raw socket's receive queue.
     When the virtio port bursts tx, it is sending packet to the tx_q.
 
@@ -162,8 +162,8 @@ Host2VM communication example
 
         modprobe uio
         echo 512 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
-        insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-        python tools/dpdk_nic_bind.py -b igb_uio 00:03.0
+        modprobe uio_pci_generic
+        python tools/dpdk_nic_bind.py -b uio_pci_generic 00:03.0
 
     We use testpmd as the forwarding application in this example.
 
diff --git a/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst b/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
index e48bc13..769723e 100644
--- a/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
+++ b/doc/guides/prog_guide/poll_mode_drv_paravirtual_vmxnets_nic.rst
@@ -150,7 +150,7 @@ This section describes an example setup for Phy-vSwitch-VM-Phy communication.
 
 .. note::
 
-    Other instructions on preparing to use DPDK such as, hugepage enabling, igb_uio port binding are not listed here.
+    Other instructions on preparing to use DPDK such as, hugepage enabling, uio port binding are not listed here.
     Please refer to *DPDK Getting Started Guide and DPDK Sample Application's User Guide* for detailed instructions.
 
 The packet reception and transmission flow path is:
-- 
2.1.0

  parent reply	other threads:[~2015-02-24 16:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-24 16:27 [dpdk-dev] [PATCH 0/2] update docs " Bruce Richardson
2015-02-24 16:27 ` [dpdk-dev] [PATCH 1/2] doc: Update GSG for uio_pci_generic use Bruce Richardson
2015-02-25 12:14   ` Iremonger, Bernard
2015-02-25 12:25     ` Bruce Richardson
2015-02-24 16:27 ` Bruce Richardson [this message]
2015-02-25 12:19   ` [dpdk-dev] [PATCH 2/2] doc: update programmers guide for uio_pci_generic Iremonger, Bernard
2015-02-25 12:27     ` Bruce Richardson
2015-02-25 13:12       ` Iremonger, Bernard
2015-02-25 13:20         ` Bruce Richardson
2015-02-27 11:47           ` Bruce Richardson
2015-02-24 21:38 ` [dpdk-dev] [PATCH 0/2] update docs " Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424795260-13793-3-git-send-email-bruce.richardson@intel.com \
    --to=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).