From: Stephen Hemminger <stephen@networkplumber.org>
To: Yong Wang <yongwang@vmware.com>
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 4/7] vmxnet3: add support for multi-segment transmit
Date: Wed, 25 Feb 2015 18:31:59 -0800 [thread overview]
Message-ID: <1424917922-1979-4-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1424917922-1979-1-git-send-email-stephen@networkplumber.org>
Change sending loop to support multi-segment mbufs.
The VMXNET3 api has start-of-packet and end-packet flags, so it
is not hard to send multi-segment mbuf's.
Also, update descriptor in 32 bit value rather than toggling
bitfields which is slower and error prone.
Based on code in earlier driver, and the Linux kernel driver.
Add a compiler barrier to make sure that update of earlier descriptor
are completed prior to update of generation bit on start of packet.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
v2 -- incorporate # of segments check
lib/librte_pmd_vmxnet3/vmxnet3_ring.h | 1 +
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 137 ++++++++++++++++------------------
2 files changed, 65 insertions(+), 73 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ring.h b/lib/librte_pmd_vmxnet3/vmxnet3_ring.h
index ebe6268..612487e 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ring.h
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ring.h
@@ -125,6 +125,7 @@ struct vmxnet3_txq_stats {
* the counters below track droppings due to
* different reasons
*/
+ uint64_t drop_too_many_segs;
uint64_t drop_tso;
uint64_t tx_ring_full;
};
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 38ac811..884b57f 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -312,20 +312,22 @@ vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *txq)
VMXNET3_ASSERT(txq->cmd_ring.base[tcd->txdIdx].txd.eop == 1);
#endif
mbuf = txq->cmd_ring.buf_info[tcd->txdIdx].m;
- if (unlikely(mbuf == NULL))
- rte_panic("EOP desc does not point to a valid mbuf");
- else
- rte_pktmbuf_free(mbuf);
+ rte_pktmbuf_free_seg(mbuf);
+ txq->cmd_ring.buf_info[tcd->txdIdx].m = NULL;
+ while (txq->cmd_ring.next2comp != tcd->txdIdx) {
+ mbuf = txq->cmd_ring.buf_info[txq->cmd_ring.next2comp].m;
+ txq->cmd_ring.buf_info[txq->cmd_ring.next2comp].m = NULL;
+ rte_pktmbuf_free_seg(mbuf);
- txq->cmd_ring.buf_info[tcd->txdIdx].m = NULL;
- /* Mark the txd for which tcd was generated as completed */
- vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
+ /* Mark the txd for which tcd was generated as completed */
+ vmxnet3_cmd_ring_adv_next2comp(&txq->cmd_ring);
+ completed++;
+ }
vmxnet3_comp_ring_adv_next2proc(comp_ring);
tcd = (struct Vmxnet3_TxCompDesc *)(comp_ring->base +
comp_ring->next2proc);
- completed++;
}
PMD_TX_LOG(DEBUG, "Processed %d tx comps & command descs.", completed);
@@ -336,13 +338,8 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts)
{
uint16_t nb_tx;
- Vmxnet3_TxDesc *txd = NULL;
- vmxnet3_buf_info_t *tbi = NULL;
- struct vmxnet3_hw *hw;
- struct rte_mbuf *txm;
vmxnet3_tx_queue_t *txq = tx_queue;
-
- hw = txq->hw;
+ struct vmxnet3_hw *hw = txq->hw;
if (unlikely(txq->stopped)) {
PMD_TX_LOG(DEBUG, "Tx queue is stopped.");
@@ -354,75 +351,69 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
nb_tx = 0;
while (nb_tx < nb_pkts) {
+ Vmxnet3_GenericDesc *gdesc;
+ vmxnet3_buf_info_t *tbi;
+ uint32_t first2fill, avail, dw2;
+ struct rte_mbuf *txm = tx_pkts[nb_tx];
+ struct rte_mbuf *m_seg = txm;
+
+ /* Is this packet execessively fragmented, then drop */
+ if (unlikely(txm->nb_segs > VMXNET3_MAX_TXD_PER_PKT)) {
+ ++txq->stats.drop_too_many_segs;
+ ++txq->stats.drop_total;
+ rte_pktmbuf_free(txm);
+ ++nb_tx;
+ continue;
+ }
- if (vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring)) {
- int copy_size = 0;
-
- txm = tx_pkts[nb_tx];
- /* Don't support scatter packets yet, free them if met */
- if (txm->nb_segs != 1) {
- PMD_TX_LOG(DEBUG, "Don't support scatter packets yet, drop!");
- rte_pktmbuf_free(tx_pkts[nb_tx]);
- txq->stats.drop_total++;
-
- nb_tx++;
- continue;
- }
-
- txd = (Vmxnet3_TxDesc *)(txq->cmd_ring.base + txq->cmd_ring.next2fill);
- if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
- struct Vmxnet3_TxDataDesc *tdd;
-
- tdd = txq->data_ring.base + txq->cmd_ring.next2fill;
- copy_size = rte_pktmbuf_pkt_len(txm);
- rte_memcpy(tdd->data, rte_pktmbuf_mtod(txm, char *), copy_size);
- }
+ /* Is command ring full? */
+ avail = vmxnet3_cmd_ring_desc_avail(&txq->cmd_ring);
+ if (txm->nb_segs > avail) {
+ ++txq->stats.tx_ring_full;
+ break;
+ }
- /* Fill the tx descriptor */
+ /* use the previous gen bit for the SOP desc */
+ dw2 = (txq->cmd_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT;
+ first2fill = txq->cmd_ring.next2fill;
+ do {
+ /* Remember the transmit buffer for cleanup */
tbi = txq->cmd_ring.buf_info + txq->cmd_ring.next2fill;
- tbi->bufPA = RTE_MBUF_DATA_DMA_ADDR(txm);
- if (copy_size)
- txd->addr = rte_cpu_to_le_64(txq->data_ring.basePA +
- txq->cmd_ring.next2fill *
- sizeof(struct Vmxnet3_TxDataDesc));
- else
- txd->addr = tbi->bufPA;
- txd->len = txm->data_len;
+ tbi->m = m_seg;
- /* Mark the last descriptor as End of Packet. */
- txd->cq = 1;
- txd->eop = 1;
+ /* NB: the following assumes that VMXNET3 maximum
+ transmit buffer size (16K) is greater than
+ maximum sizeof mbuf segment size. */
+ gdesc = txq->cmd_ring.base + txq->cmd_ring.next2fill;
+ gdesc->txd.addr = RTE_MBUF_DATA_DMA_ADDR(m_seg);
+ gdesc->dword[2] = dw2 | m_seg->data_len;
+ gdesc->dword[3] = 0;
- /* Add VLAN tag if requested */
- if (txm->ol_flags & PKT_TX_VLAN_PKT) {
- txd->ti = 1;
- txd->tci = rte_cpu_to_le_16(txm->vlan_tci);
- }
+ /* move to the next2fill descriptor */
+ vmxnet3_cmd_ring_adv_next2fill(&txq->cmd_ring);
- /* Record current mbuf for freeing it later in tx complete */
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
- VMXNET3_ASSERT(txm);
-#endif
- tbi->m = txm;
+ /* use the right gen for non-SOP desc */
+ dw2 = txq->cmd_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ } while ( (m_seg = m_seg->next) != NULL);
- /* Set the offloading mode to default */
- txd->hlen = 0;
- txd->om = VMXNET3_OM_NONE;
- txd->msscof = 0;
+ /* Update the EOP descriptor */
+ gdesc->dword[3] |= VMXNET3_TXD_EOP | VMXNET3_TXD_CQ;
- /* finally flip the GEN bit of the SOP desc */
- txd->gen = txq->cmd_ring.gen;
- txq->shared->ctrl.txNumDeferred++;
+ /* Add VLAN tag if present */
+ gdesc = txq->cmd_ring.base + first2fill;
+ if (txm->ol_flags & PKT_TX_VLAN_PKT) {
+ gdesc->txd.ti = 1;
+ gdesc->txd.tci = txm->vlan_tci;
+ }
- /* move to the next2fill descriptor */
- vmxnet3_cmd_ring_adv_next2fill(&txq->cmd_ring);
- nb_tx++;
+ /* TODO: Add transmit checksum offload here */
- } else {
- PMD_TX_LOG(DEBUG, "No free tx cmd desc(s)");
- txq->stats.drop_total += (nb_pkts - nb_tx);
- break;
- }
+ /* flip the GEN bit on the SOP */
+ rte_compiler_barrier();
+ gdesc->dword[2] ^= VMXNET3_TXD_GEN;
+
+ txq->shared->ctrl.txNumDeferred++;
+ nb_tx++;
}
PMD_TX_LOG(DEBUG, "vmxnet3 txThreshold: %u", txq->shared->ctrl.txThreshold);
--
2.1.4
next prev parent reply other threads:[~2015-02-26 2:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 2:31 [dpdk-dev] [PATCH 1/7] vmxnet3: enable VLAN filtering Stephen Hemminger
2015-02-26 2:31 ` [dpdk-dev] [PATCH 2/7] vmxnet3: remove mtu check Stephen Hemminger
2015-02-26 2:31 ` [dpdk-dev] [PATCH 3/7] vmxnet3: cleanup txq stats Stephen Hemminger
2015-03-05 19:48 ` Yong Wang
2015-02-26 2:31 ` Stephen Hemminger [this message]
2015-03-05 19:35 ` [dpdk-dev] [PATCH 4/7] vmxnet3: add support for multi-segment transmit Yong Wang
2015-02-26 2:32 ` [dpdk-dev] [PATCH 5/7] vmxnet3: fix link state handling Stephen Hemminger
2015-02-26 2:32 ` [dpdk-dev] [PATCH 6/7] vmxnet3: support RSS and refactor offload Stephen Hemminger
2015-03-05 19:27 ` Yong Wang
2015-02-26 2:32 ` [dpdk-dev] [PATCH 7/7] vmxnet3: support jumbo frames Stephen Hemminger
2015-02-26 11:43 ` [dpdk-dev] [PATCH 1/7] vmxnet3: enable VLAN filtering Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424917922-1979-4-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=yongwang@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).