From: Thomas Monjalon <thomas.monjalon@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] ethdev: remove useless parameter in init functions
Date: Thu, 5 Mar 2015 19:40:45 +0100 [thread overview]
Message-ID: <1425580845-13462-1-git-send-email-thomas.monjalon@6wind.com> (raw)
The pointer to struct eth_driver is not used and is already set
in struct rte_eth_dev.
It's a small cleanup in PMD API which probably needs more
attention to make clear what is a driver, a PCI driver, an
ethernet driver, etc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 4 ++--
lib/librte_ether/rte_ethdev.h | 14 ++++----------
lib/librte_pmd_e1000/em_ethdev.c | 3 +--
lib/librte_pmd_e1000/igb_ethdev.c | 6 ++----
lib/librte_pmd_enic/enic_ethdev.c | 4 +---
lib/librte_pmd_fm10k/fm10k_ethdev.c | 3 +--
lib/librte_pmd_i40e/i40e_ethdev.c | 7 ++-----
lib/librte_pmd_i40e/i40e_ethdev_vf.c | 3 +--
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 12 ++++--------
lib/librte_pmd_virtio/virtio_ethdev.c | 6 ++----
lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c | 6 ++----
11 files changed, 22 insertions(+), 46 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 6ea7a17..c5e1dec 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -324,7 +324,7 @@ rte_eth_dev_init(struct rte_pci_driver *pci_drv,
eth_dev->data->mtu = ETHER_MTU;
/* Invoke PMD device initialization function */
- diag = (*eth_drv->eth_dev_init)(eth_drv, eth_dev);
+ diag = (*eth_drv->eth_dev_init)(eth_dev);
if (diag == 0)
return (0);
@@ -362,7 +362,7 @@ rte_eth_dev_uninit(struct rte_pci_device *pci_dev)
/* Invoke PMD device uninit function */
if (*eth_drv->eth_dev_uninit) {
- ret = (*eth_drv->eth_dev_uninit)(eth_drv, eth_dev);
+ ret = (*eth_drv->eth_dev_uninit)(eth_dev);
if (ret)
return ret;
}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 8db3127..21aa359 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1609,9 +1609,6 @@ struct eth_driver;
* Initialization function of an Ethernet driver invoked for each matching
* Ethernet PCI device detected during the PCI probing phase.
*
- * @param eth_drv
- * The pointer to the [matching] Ethernet driver structure supplied by
- * the PMD when it registered itself.
* @param eth_dev
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure
* associated with the matching device and which have been [automatically]
@@ -1622,6 +1619,8 @@ struct eth_driver;
* - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
* contains the generic PCI information of the matching device.
*
+ * - *driver*: Holds the pointer to the *eth_driver* structure.
+ *
* - *dev_private*: Holds a pointer to the device private data structure.
*
* - *mtu*: Contains the default Ethernet maximum frame length (1500).
@@ -1635,17 +1634,13 @@ struct eth_driver;
* of the *eth_dev* structure.
* - <0: Error code of the device initialization failure.
*/
-typedef int (*eth_dev_init_t)(struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev);
/**
* @internal
* Finalization function of an Ethernet driver invoked for each matching
* Ethernet PCI device detected during the PCI closing phase.
*
- * @param eth_drv
- * The pointer to the [matching] Ethernet driver structure supplied by
- * the PMD when it registered itself.
* @param eth_dev
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure
* associated with the matching device and which have been [automatically]
@@ -1656,8 +1651,7 @@ typedef int (*eth_dev_init_t)(struct eth_driver *eth_drv,
* of the *eth_dev* structure.
* - <0: Error code of the device initialization failure.
*/
-typedef int (*eth_dev_uninit_t)(const struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev);
/**
* @internal
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 3f2897e..332c2e9 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -217,8 +217,7 @@ rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,
}
static int
-eth_em_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_em_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
struct e1000_hw *hw =
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index 504ae74..4aaa6ec 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -453,8 +453,7 @@ igb_reset_swfw_lock(struct e1000_hw *hw)
}
static int
-eth_igb_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_igb_dev_init(struct rte_eth_dev *eth_dev)
{
int error = 0;
struct rte_pci_device *pci_dev;
@@ -614,8 +613,7 @@ err_late:
* Virtual Function device init
*/
static int
-eth_igbvf_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_igbvf_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
struct e1000_hw *hw =
diff --git a/lib/librte_pmd_enic/enic_ethdev.c b/lib/librte_pmd_enic/enic_ethdev.c
index 9cb6666..4950ede 100644
--- a/lib/librte_pmd_enic/enic_ethdev.c
+++ b/lib/librte_pmd_enic/enic_ethdev.c
@@ -555,9 +555,7 @@ struct enic *enicpmd_list_head = NULL;
/* Initialize the driver
* It returns 0 on success.
*/
-static int eth_enicpmd_dev_init(
- __attribute__((unused))struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+static int eth_enicpmd_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pdev;
struct rte_pci_addr *addr;
diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c b/lib/librte_pmd_fm10k/fm10k_ethdev.c
index 07ea1e7..62c4a39 100644
--- a/lib/librte_pmd_fm10k/fm10k_ethdev.c
+++ b/lib/librte_pmd_fm10k/fm10k_ethdev.c
@@ -1668,8 +1668,7 @@ static struct eth_dev_ops fm10k_eth_dev_ops = {
};
static int
-eth_fm10k_dev_init(__rte_unused struct eth_driver *eth_drv,
- struct rte_eth_dev *dev)
+eth_fm10k_dev_init(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int diag;
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 5e502b6..6888072 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -106,9 +106,7 @@
(1UL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER) | \
(1UL << RTE_ETH_FLOW_L2_PAYLOAD))
-static int eth_i40e_dev_init(\
- __attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+static int eth_i40e_dev_init(struct rte_eth_dev *eth_dev);
static int i40e_dev_configure(struct rte_eth_dev *dev);
static int i40e_dev_start(struct rte_eth_dev *dev);
static void i40e_dev_stop(struct rte_eth_dev *dev);
@@ -364,8 +362,7 @@ static inline void i40e_flex_payload_reg_init(struct i40e_hw *hw)
}
static int
-eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
- struct rte_eth_dev *dev)
+eth_i40e_dev_init(struct rte_eth_dev *dev)
{
struct rte_pci_device *pci_dev;
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
diff --git a/lib/librte_pmd_i40e/i40e_ethdev_vf.c b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
index f031c19..70eefff 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev_vf.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
@@ -1149,8 +1149,7 @@ err:
}
static int
-i40evf_dev_init(__rte_unused struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+i40evf_dev_init(struct rte_eth_dev *eth_dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(\
eth_dev->data->dev_private);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 9bdc046..6599ddb 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -117,8 +117,7 @@
#define IXGBE_QUEUE_STAT_COUNTERS (sizeof(hw_stats->qprc) / sizeof(hw_stats->qprc[0]))
-static int eth_ixgbe_dev_init(struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+static int eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev);
static int ixgbe_dev_configure(struct rte_eth_dev *dev);
static int ixgbe_dev_start(struct rte_eth_dev *dev);
static void ixgbe_dev_stop(struct rte_eth_dev *dev);
@@ -184,8 +183,7 @@ static void ixgbe_remove_rar(struct rte_eth_dev *dev, uint32_t index);
static void ixgbe_dcb_init(struct ixgbe_hw *hw,struct ixgbe_dcb_config *dcb_config);
/* For Virtual Function support */
-static int eth_ixgbevf_dev_init(struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+static int eth_ixgbevf_dev_init(struct rte_eth_dev *eth_dev);
static int ixgbevf_dev_configure(struct rte_eth_dev *dev);
static int ixgbevf_dev_start(struct rte_eth_dev *dev);
static void ixgbevf_dev_stop(struct rte_eth_dev *dev);
@@ -718,8 +716,7 @@ ixgbe_swfw_lock_reset(struct ixgbe_hw *hw)
* It returns 0 on success.
*/
static int
-eth_ixgbe_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
struct ixgbe_hw *hw =
@@ -967,8 +964,7 @@ generate_random_mac_addr(struct ether_addr *mac_addr)
* Virtual Function device init
*/
static int
-eth_ixgbevf_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_ixgbevf_dev_init(struct rte_eth_dev *eth_dev)
{
int diag;
uint32_t tc, tcs;
diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c b/lib/librte_pmd_virtio/virtio_ethdev.c
index d239083..12158e7 100644
--- a/lib/librte_pmd_virtio/virtio_ethdev.c
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c
@@ -62,8 +62,7 @@
#include "virtqueue.h"
-static int eth_virtio_dev_init(struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+static int eth_virtio_dev_init(struct rte_eth_dev *eth_dev);
static int virtio_dev_configure(struct rte_eth_dev *dev);
static int virtio_dev_start(struct rte_eth_dev *dev);
static void virtio_dev_stop(struct rte_eth_dev *dev);
@@ -1103,8 +1102,7 @@ virtio_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
* It returns 0 on success.
*/
static int
-eth_virtio_dev_init(__rte_unused struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
{
struct virtio_hw *hw = eth_dev->data->dev_private;
struct virtio_net_config *config;
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
index 6068c60..a2a2aaa 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
@@ -70,8 +70,7 @@
#define PROCESS_SYS_EVENTS 0
-static int eth_vmxnet3_dev_init(struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev);
+static int eth_vmxnet3_dev_init(struct rte_eth_dev *eth_dev);
static int vmxnet3_dev_configure(struct rte_eth_dev *dev);
static int vmxnet3_dev_start(struct rte_eth_dev *dev);
static void vmxnet3_dev_stop(struct rte_eth_dev *dev);
@@ -182,8 +181,7 @@ vmxnet3_disable_intr(struct vmxnet3_hw *hw)
* It returns 0 on success.
*/
static int
-eth_vmxnet3_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
- struct rte_eth_dev *eth_dev)
+eth_vmxnet3_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
struct vmxnet3_hw *hw = eth_dev->data->dev_private;
--
2.2.2
next reply other threads:[~2015-03-05 18:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-05 18:40 Thomas Monjalon [this message]
2015-03-10 11:20 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425580845-13462-1-git-send-email-thomas.monjalon@6wind.com \
--to=thomas.monjalon@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).