DPDK patches and discussions
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: Yong Wang <yongwang@vmware.com>
Cc: dev@dpdk.org, Stephen Hemminger <shemming@brocade.com>
Subject: [dpdk-dev] [PATCH v3 01/10] vmxnet3: fix link state handling
Date: Thu,  5 Mar 2015 16:10:26 -0800	[thread overview]
Message-ID: <1425600635-20628-2-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1425600635-20628-1-git-send-email-stephen@networkplumber.org>

From: Stephen Hemminger <shemming@brocade.com>

The Intel version of VMXNET3 driver does not handle link state properly.
The VMXNET3 API returns 1 if connected and 0 if disconnected.
Also need to return correct value to indicate state change.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
---
 lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c | 54 ++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 15 deletions(-)

diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
index 6068c60..4c882ee 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
@@ -149,9 +149,36 @@ gpa_zone_reserve(struct rte_eth_dev *dev, uint32_t size,
  *   - On success, zero.
  *   - On failure, negative value.
  */
-static inline int
-rte_vmxnet3_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
+
+static int
+vmxnet3_dev_atomic_read_link_status(struct rte_eth_dev *dev,
+				    struct rte_eth_link *link)
+{
+	struct rte_eth_link *dst = link;
+	struct rte_eth_link *src = &(dev->data->dev_link);
+
+	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+				*(uint64_t *)src) == 0)
+		return -1;
+
+	return 0;
+}
+
+/**
+ * Atomically writes the link status information into global
+ * structure rte_eth_dev.
+ *
+ * @param dev
+ *   - Pointer to the structure rte_eth_dev to write to.
+ *   - Pointer to the buffer to be saved with the link status.
+ *
+ * @return
+ *   - On success, zero.
+ *   - On failure, negative value.
+ */
+static int
+vmxnet3_dev_atomic_write_link_status(struct rte_eth_dev *dev,
+				     struct rte_eth_link *link)
 {
 	struct rte_eth_link *dst = &(dev->data->dev_link);
 	struct rte_eth_link *src = link;
@@ -384,6 +411,7 @@ vmxnet3_setup_driver_shared(struct rte_eth_dev *dev)
 	devRead->misc.driverInfo.vmxnet3RevSpt = 1;
 	devRead->misc.driverInfo.uptVerSpt     = 1;
 
+	devRead->misc.mtu = rte_le_to_cpu_32(dev->data->mtu);
 	devRead->misc.queueDescPA  = hw->queueDescPA;
 	devRead->misc.queueDescLen = hw->queue_desc_len;
 	devRead->misc.mtu          = hw->cur_mtu;
@@ -570,7 +598,7 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
 
 	/* Clear recorded link status */
 	memset(&link, 0, sizeof(link));
-	rte_vmxnet3_dev_atomic_write_link_status(dev, &link);
+	vmxnet3_dev_atomic_write_link_status(dev, &link);
 }
 
 /*
@@ -653,28 +681,24 @@ static int
 vmxnet3_dev_link_update(struct rte_eth_dev *dev, __attribute__((unused)) int wait_to_complete)
 {
 	struct vmxnet3_hw *hw = dev->data->dev_private;
-	struct rte_eth_link link;
+	struct rte_eth_link old, link;
 	uint32_t ret;
 
+	memset(&link, 0, sizeof(link));
+	vmxnet3_dev_atomic_read_link_status(dev, &old);
+
 	VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
 	ret = VMXNET3_READ_BAR1_REG(hw, VMXNET3_REG_CMD);
 
-	if (!ret) {
-		PMD_INIT_LOG(ERR, "Link Status Negative : %s()", __func__);
-		return -1;
-	}
-
 	if (ret & 0x1) {
 		link.link_status = 1;
 		link.link_duplex = ETH_LINK_FULL_DUPLEX;
 		link.link_speed = ETH_LINK_SPEED_10000;
-
-		rte_vmxnet3_dev_atomic_write_link_status(dev, &link);
-
-		return 0;
 	}
 
-	return -1;
+	vmxnet3_dev_atomic_write_link_status(dev, &link);
+
+	return (old.link_status == link.link_status) ? -1 : 0;
 }
 
 /* Updating rxmode through Vmxnet3_DriverShared structure in adapter */
-- 
2.1.4

  reply	other threads:[~2015-03-06  0:10 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-06  0:10 [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Stephen Hemminger
2015-03-06  0:10 ` Stephen Hemminger [this message]
2015-03-06 17:21   ` [dpdk-dev] [PATCH v3 01/10] vmxnet3: fix link state handling Sanford, Robert
     [not found]   ` <0efb310c0ee54f9192eae95f6ee909e0@BRMWP-EXMB11.corp.brocade.com>
2015-03-08 17:45     ` Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 02/10] vmxnet3: enable VLAN filtering Stephen Hemminger
2015-03-06 21:54   ` Yong Wang
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 03/10] vmxnet3: remove mtu check Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 04/10] vmxnet3: cleanup txq stats Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 05/10] vmxnet3: add support for multi-segment transmit Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 06/10] vmxnet3: support RSS and refactor offload Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 07/10] vmxnet3: support jumbo frames Stephen Hemminger
2015-03-09 23:28   ` Yong Wang
2015-03-09 23:32     ` Yong Wang
2015-03-10 18:35       ` Stephen Hemminger
2015-03-11  1:03         ` Yong Wang
     [not found]         ` <4ebc1312d5cb42d583fb8a204c353feb@BRMWP-EXMB11.corp.brocade.com>
2015-03-11  6:54           ` Stephen Hemminger
     [not found]   ` <9bc742bd1778468a815da8070b584ee7@BRMWP-EXMB11.corp.brocade.com>
2015-03-10  4:18     ` Stephen Hemminger
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 08/10] vmxnet3: get rid of DEBUG ifdefs Stephen Hemminger
2015-03-06 21:59   ` Yong Wang
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 09/10] vmxnet3: add check for jumbo segment Stephen Hemminger
2015-03-06 23:48   ` Yong Wang
2015-03-06  0:10 ` [dpdk-dev] [PATCH v3 10/10] vmxnet3: remove excess inlining Stephen Hemminger
2015-03-06 23:54   ` Yong Wang
2015-03-07  2:00     ` Stephen Hemminger
2015-03-10 13:42 ` [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Thomas Monjalon
2015-06-22 12:22   ` Thomas Monjalon
2015-07-08 23:21     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425600635-20628-2-git-send-email-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    --cc=shemming@brocade.com \
    --cc=yongwang@vmware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).