From: Stephen Hemminger <stephen@networkplumber.org>
To: Yong Wang <yongwang@vmware.com>
Cc: dev@dpdk.org, Stephen Hemminger <shemming@brocade.com>
Subject: [dpdk-dev] [PATCH v3 03/10] vmxnet3: remove mtu check
Date: Thu, 5 Mar 2015 16:10:28 -0800 [thread overview]
Message-ID: <1425600635-20628-4-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1425600635-20628-1-git-send-email-stephen@networkplumber.org>
From: Stephen Hemminger <shemming@brocade.com>
Remove check for packets greater than MTU. No other driver does
this, it should be handled at higher layer
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
---
lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c | 2 --
lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h | 1 -
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 10 ----------
3 files changed, 13 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
index f4c2f12..35bb561 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
@@ -246,7 +246,6 @@ eth_vmxnet3_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
hw->num_rx_queues = 1;
hw->num_tx_queues = 1;
- hw->cur_mtu = ETHER_MTU;
hw->bufs_per_pkt = 1;
/* Check h/w version compatibility with driver. */
@@ -422,7 +421,6 @@ vmxnet3_setup_driver_shared(struct rte_eth_dev *dev)
devRead->misc.mtu = rte_le_to_cpu_32(dev->data->mtu);
devRead->misc.queueDescPA = hw->queueDescPA;
devRead->misc.queueDescLen = hw->queue_desc_len;
- devRead->misc.mtu = hw->cur_mtu;
devRead->misc.numTxQueues = hw->num_tx_queues;
devRead->misc.numRxQueues = hw->num_rx_queues;
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
index e9d67a7..83182e2 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
@@ -107,7 +107,6 @@ struct vmxnet3_hw {
uint8_t num_tx_queues;
uint8_t num_rx_queues;
uint8_t bufs_per_pkt;
- uint16_t cur_mtu;
Vmxnet3_TxQueueDesc *tqd_start; /* start address of all tx queue desc */
Vmxnet3_RxQueueDesc *rqd_start; /* start address of all rx queue desc */
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 5fe3de5..38ac811 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -369,16 +369,6 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
continue;
}
- /* Needs to minus ether header len */
- if (txm->data_len > (hw->cur_mtu + ETHER_HDR_LEN)) {
- PMD_TX_LOG(DEBUG, "Packet data_len higher than MTU");
- rte_pktmbuf_free(tx_pkts[nb_tx]);
- txq->stats.drop_total++;
-
- nb_tx++;
- continue;
- }
-
txd = (Vmxnet3_TxDesc *)(txq->cmd_ring.base + txq->cmd_ring.next2fill);
if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
struct Vmxnet3_TxDataDesc *tdd;
--
2.1.4
next prev parent reply other threads:[~2015-03-06 0:10 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-06 0:10 [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 01/10] vmxnet3: fix link state handling Stephen Hemminger
2015-03-06 17:21 ` Sanford, Robert
[not found] ` <0efb310c0ee54f9192eae95f6ee909e0@BRMWP-EXMB11.corp.brocade.com>
2015-03-08 17:45 ` Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 02/10] vmxnet3: enable VLAN filtering Stephen Hemminger
2015-03-06 21:54 ` Yong Wang
2015-03-06 0:10 ` Stephen Hemminger [this message]
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 04/10] vmxnet3: cleanup txq stats Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 05/10] vmxnet3: add support for multi-segment transmit Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 06/10] vmxnet3: support RSS and refactor offload Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 07/10] vmxnet3: support jumbo frames Stephen Hemminger
2015-03-09 23:28 ` Yong Wang
2015-03-09 23:32 ` Yong Wang
2015-03-10 18:35 ` Stephen Hemminger
2015-03-11 1:03 ` Yong Wang
[not found] ` <4ebc1312d5cb42d583fb8a204c353feb@BRMWP-EXMB11.corp.brocade.com>
2015-03-11 6:54 ` Stephen Hemminger
[not found] ` <9bc742bd1778468a815da8070b584ee7@BRMWP-EXMB11.corp.brocade.com>
2015-03-10 4:18 ` Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 08/10] vmxnet3: get rid of DEBUG ifdefs Stephen Hemminger
2015-03-06 21:59 ` Yong Wang
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 09/10] vmxnet3: add check for jumbo segment Stephen Hemminger
2015-03-06 23:48 ` Yong Wang
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 10/10] vmxnet3: remove excess inlining Stephen Hemminger
2015-03-06 23:54 ` Yong Wang
2015-03-07 2:00 ` Stephen Hemminger
2015-03-10 13:42 ` [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Thomas Monjalon
2015-06-22 12:22 ` Thomas Monjalon
2015-07-08 23:21 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425600635-20628-4-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=shemming@brocade.com \
--cc=yongwang@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).