From: Stephen Hemminger <stephen@networkplumber.org>
To: Yong Wang <yongwang@vmware.com>
Cc: dev@dpdk.org, Bill Hong <bhong@brocade.com>,
Stephen Hemminger <shemming@brocade.com>
Subject: [dpdk-dev] [PATCH v3 06/10] vmxnet3: support RSS and refactor offload
Date: Thu, 5 Mar 2015 16:10:31 -0800 [thread overview]
Message-ID: <1425600635-20628-7-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1425600635-20628-1-git-send-email-stephen@networkplumber.org>
From: Stephen Hemminger <shemming@brocade.com>
Refactor the logic to compute receive offload flags to a simpler
function. Andd add support for putting RSS flow hash into packet.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bill Hong <bhong@brocade.com>
Acked-by: Yong Wang <yongwang@vmware.com>
---
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 69 ++++++++++++++++++++---------------
1 file changed, 40 insertions(+), 29 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 5d0f227..ba48a12 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -521,6 +521,43 @@ vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
return i;
}
+
+/* Receive side checksum and other offloads */
+static void
+vmxnet3_rx_offload(const Vmxnet3_RxCompDesc *rcd, struct rte_mbuf *rxm)
+{
+ /* Check for hardware stripped VLAN tag */
+ if (rcd->ts) {
+ rxm->ol_flags |= PKT_RX_VLAN_PKT;
+ rxm->vlan_tci = rte_le_to_cpu_16((uint16_t)rcd->tci);
+ }
+
+ /* Check for RSS */
+ if (rcd->rssType != VMXNET3_RCD_RSS_TYPE_NONE) {
+ rxm->ol_flags |= PKT_RX_RSS_HASH;
+ rxm->hash.rss = rcd->rssHash;
+ }
+
+ /* Check packet type, checksum errors, etc. Only support IPv4 for now. */
+ if (rcd->v4) {
+ struct ether_hdr *eth = rte_pktmbuf_mtod(rxm, struct ether_hdr *);
+ struct ipv4_hdr *ip = (struct ipv4_hdr *)(eth + 1);
+
+ if (((ip->version_ihl & 0xf) << 2) > (int)sizeof(struct ipv4_hdr))
+ rxm->ol_flags |= PKT_RX_IPV4_HDR_EXT;
+ else
+ rxm->ol_flags |= PKT_RX_IPV4_HDR;
+
+ if (!rcd->cnc) {
+ if (!rcd->ipc)
+ rxm->ol_flags |= PKT_RX_IP_CKSUM_BAD;
+
+ if ((rcd->tcp || rcd->udp) && !rcd->tuc)
+ rxm->ol_flags |= PKT_RX_L4_CKSUM_BAD;
+ }
+ }
+}
+
/*
* Process the Rx Completion Ring of given vmxnet3_rx_queue
* for nb_pkts burst and return the number of packets received
@@ -621,17 +658,6 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
goto rcd_done;
}
- /* Check for hardware stripped VLAN tag */
- if (rcd->ts) {
- PMD_RX_LOG(DEBUG, "Received packet with vlan ID: %d.",
- rcd->tci);
- rxm->ol_flags = PKT_RX_VLAN_PKT;
- /* Copy vlan tag in packet buffer */
- rxm->vlan_tci = rte_le_to_cpu_16((uint16_t)rcd->tci);
- } else {
- rxm->ol_flags = 0;
- rxm->vlan_tci = 0;
- }
/* Initialize newly received packet buffer */
rxm->port = rxq->port_id;
@@ -640,25 +666,10 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
rxm->pkt_len = (uint16_t)rcd->len;
rxm->data_len = (uint16_t)rcd->len;
rxm->data_off = RTE_PKTMBUF_HEADROOM;
+ rxm->ol_flags = 0;
+ rxm->vlan_tci = 0;
- /* Check packet type, checksum errors, etc. Only support IPv4 for now. */
- if (rcd->v4) {
- struct ether_hdr *eth = rte_pktmbuf_mtod(rxm, struct ether_hdr *);
- struct ipv4_hdr *ip = (struct ipv4_hdr *)(eth + 1);
-
- if (((ip->version_ihl & 0xf) << 2) > (int)sizeof(struct ipv4_hdr))
- rxm->ol_flags |= PKT_RX_IPV4_HDR_EXT;
- else
- rxm->ol_flags |= PKT_RX_IPV4_HDR;
-
- if (!rcd->cnc) {
- if (!rcd->ipc)
- rxm->ol_flags |= PKT_RX_IP_CKSUM_BAD;
-
- if ((rcd->tcp || rcd->udp) && !rcd->tuc)
- rxm->ol_flags |= PKT_RX_L4_CKSUM_BAD;
- }
- }
+ vmxnet3_rx_offload(rcd, rxm);
rx_pkts[nb_rx++] = rxm;
rcd_done:
--
2.1.4
next prev parent reply other threads:[~2015-03-06 0:10 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-06 0:10 [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 01/10] vmxnet3: fix link state handling Stephen Hemminger
2015-03-06 17:21 ` Sanford, Robert
[not found] ` <0efb310c0ee54f9192eae95f6ee909e0@BRMWP-EXMB11.corp.brocade.com>
2015-03-08 17:45 ` Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 02/10] vmxnet3: enable VLAN filtering Stephen Hemminger
2015-03-06 21:54 ` Yong Wang
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 03/10] vmxnet3: remove mtu check Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 04/10] vmxnet3: cleanup txq stats Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 05/10] vmxnet3: add support for multi-segment transmit Stephen Hemminger
2015-03-06 0:10 ` Stephen Hemminger [this message]
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 07/10] vmxnet3: support jumbo frames Stephen Hemminger
2015-03-09 23:28 ` Yong Wang
2015-03-09 23:32 ` Yong Wang
2015-03-10 18:35 ` Stephen Hemminger
2015-03-11 1:03 ` Yong Wang
[not found] ` <4ebc1312d5cb42d583fb8a204c353feb@BRMWP-EXMB11.corp.brocade.com>
2015-03-11 6:54 ` Stephen Hemminger
[not found] ` <9bc742bd1778468a815da8070b584ee7@BRMWP-EXMB11.corp.brocade.com>
2015-03-10 4:18 ` Stephen Hemminger
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 08/10] vmxnet3: get rid of DEBUG ifdefs Stephen Hemminger
2015-03-06 21:59 ` Yong Wang
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 09/10] vmxnet3: add check for jumbo segment Stephen Hemminger
2015-03-06 23:48 ` Yong Wang
2015-03-06 0:10 ` [dpdk-dev] [PATCH v3 10/10] vmxnet3: remove excess inlining Stephen Hemminger
2015-03-06 23:54 ` Yong Wang
2015-03-07 2:00 ` Stephen Hemminger
2015-03-10 13:42 ` [dpdk-dev] [PATCH v3 00/10] vmxnet3: multisegment and bugfixes Thomas Monjalon
2015-06-22 12:22 ` Thomas Monjalon
2015-07-08 23:21 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425600635-20628-7-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=bhong@brocade.com \
--cc=dev@dpdk.org \
--cc=shemming@brocade.com \
--cc=yongwang@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).