[dpdk-dev] [PATCH] testpmd: HW vlan command

[dpdk-dev] [PATCH] testpmd: HW vlan command

[Ouyang Changchun]

This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.

Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
 app/test-pmd/cmdline.c    | 36 +++++++++++++++++++++++++++++++++---
 app/test-pmd/parameters.c | 18 ++++++++++++++++++
 2 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 590e427..99cc307 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -584,7 +584,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"port config all max-pkt-len (value)\n"
 			"    Set the max packet length.\n\n"
 
-			"port config all (crc-strip|rx-cksum|hw-vlan|drop-en)"
+			"port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-filter|"
+			"hw-vlan-strip|hw-vlan-extend|drop-en)"
 			" (on|off)\n"
 			"    Set crc-strip/rx-checksum/hardware-vlan/drop_en"
 			" for ports.\n\n"
@@ -1327,6 +1328,33 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
 			printf("Unknown parameter\n");
 			return;
 		}
+	} else if (!strcmp(res->name, "hw-vlan-filter")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_filter = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_filter = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-strip")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_strip  = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_strip  = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-extend")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_extend = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_extend = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
 	} else if (!strcmp(res->name, "drop-en")) {
 		if (!strcmp(res->value, "on"))
 			rx_drop_en = 1;
@@ -1355,7 +1383,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_all =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all, "all");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, name,
-					"crc-strip#rx-cksum#hw-vlan");
+					"crc-strip#rx-cksum#hw-vlan#"
+					"hw-vlan-filter#hw-vlan-strip#hw-vlan-extend");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
 							"on#off");
@@ -1363,7 +1392,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 cmdline_parse_inst_t cmd_config_rx_mode_flag = {
 	.f = cmd_config_rx_mode_flag_parsed,
 	.data = NULL,
-	.help_str = "port config all crc-strip|rx-cksum|hw-vlan on|off",
+	.help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
+		"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
 	.tokens = {
 		(void *)&cmd_config_rx_mode_flag_port,
 		(void *)&cmd_config_rx_mode_flag_keyword,
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index adf3203..04dc129 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -157,6 +157,9 @@ usage(char* progname)
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 	printf("  --disable-hw-vlan: disable hardware vlan.\n");
+	printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
+	printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
+	printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
 	printf("  --enable-drop-en: enable per queue packet drop.\n");
 	printf("  --disable-rss: disable rss.\n");
 	printf("  --port-topology=N: set port topology (N: paired (default) or "
@@ -528,6 +531,9 @@ launch_args_parse(int argc, char** argv)
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
 		{ "disable-hw-vlan",            0, 0, 0 },
+		{ "disable-hw-vlan-filter",     0, 0, 0 },
+		{ "disable-hw-vlan-strip",      0, 0, 0 },
+		{ "disable-hw-vlan-extend",     0, 0, 0 },
 		{ "enable-drop-en",            0, 0, 0 },
 		{ "disable-rss",                0, 0, 0 },
 		{ "port-topology",              1, 0, 0 },
@@ -778,6 +784,18 @@ launch_args_parse(int argc, char** argv)
 				rx_mode.hw_vlan_extend = 0;
 			}
 
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-filter"))
+				rx_mode.hw_vlan_filter = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-strip"))
+				rx_mode.hw_vlan_strip  = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-extend"))
+				rx_mode.hw_vlan_extend = 0;
+
 			if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
 				rx_drop_en = 1;
 
-- 
1.8.4.2

Re: [dpdk-dev] [PATCH] testpmd: HW vlan command

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ouyang Changchun
> Sent: Friday, February 13, 2015 12:04 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] testpmd: HW vlan command
> 
> This patch enables testpmd user can config port hw_vlan with more fine
> granularity:
> hw vlan filter, hw vlan strip, and hw vlan extend.
> 
> Don't remove the original command(hw-vlan) considering that some user still
> want to use
> only one command to switch on/off all 3 options.
> 
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>

Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Re: [dpdk-dev] [PATCH] testpmd: HW vlan command

[Thomas Monjalon]

2015-03-03 23:52, De Lara Guarch, Pablo:
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ouyang Changchun
> > Sent: Friday, February 13, 2015 12:04 PM
> > To: dev@dpdk.org
> > Subject: [dpdk-dev] [PATCH] testpmd: HW vlan command
> > 
> > This patch enables testpmd user can config port hw_vlan with more fine
> > granularity:
> > hw vlan filter, hw vlan strip, and hw vlan extend.
> > 
> > Don't remove the original command(hw-vlan) considering that some user still
> > want to use
> > only one command to switch on/off all 3 options.
> > 
> > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> 
> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Changchun, Pablo, now the rule should be to take care of documentation
and submit the according update in the same patch (if small) or the
same patchset.
Could you make a v2 please?

Thanks

[dpdk-dev] [PATCH v2 0/2]

[Ouyang Changchun]

This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend;

Update testpmd doc accordingly.

Changchun Ouyang (2):
  testpmd: HW vlan command
  doc: Update for new HW vlan command

 app/test-pmd/cmdline.c                      | 36 ++++++++++++++++++++++++++---
 app/test-pmd/parameters.c                   | 18 +++++++++++++++
 doc/guides/testpmd_app_ug/run_app.rst       | 12 ++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++++++++++
 4 files changed, 96 insertions(+), 3 deletions(-)

-- 
1.8.4.2

[dpdk-dev] [PATCH v2 1/2] testpmd: HW vlan command

[Ouyang Changchun]

This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.

Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 app/test-pmd/cmdline.c    | 36 +++++++++++++++++++++++++++++++++---
 app/test-pmd/parameters.c | 18 ++++++++++++++++++
 2 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 590e427..99cc307 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -584,7 +584,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"port config all max-pkt-len (value)\n"
 			"    Set the max packet length.\n\n"
 
-			"port config all (crc-strip|rx-cksum|hw-vlan|drop-en)"
+			"port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-filter|"
+			"hw-vlan-strip|hw-vlan-extend|drop-en)"
 			" (on|off)\n"
 			"    Set crc-strip/rx-checksum/hardware-vlan/drop_en"
 			" for ports.\n\n"
@@ -1327,6 +1328,33 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
 			printf("Unknown parameter\n");
 			return;
 		}
+	} else if (!strcmp(res->name, "hw-vlan-filter")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_filter = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_filter = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-strip")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_strip  = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_strip  = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-extend")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_extend = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_extend = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
 	} else if (!strcmp(res->name, "drop-en")) {
 		if (!strcmp(res->value, "on"))
 			rx_drop_en = 1;
@@ -1355,7 +1383,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_all =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all, "all");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, name,
-					"crc-strip#rx-cksum#hw-vlan");
+					"crc-strip#rx-cksum#hw-vlan#"
+					"hw-vlan-filter#hw-vlan-strip#hw-vlan-extend");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
 							"on#off");
@@ -1363,7 +1392,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 cmdline_parse_inst_t cmd_config_rx_mode_flag = {
 	.f = cmd_config_rx_mode_flag_parsed,
 	.data = NULL,
-	.help_str = "port config all crc-strip|rx-cksum|hw-vlan on|off",
+	.help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
+		"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
 	.tokens = {
 		(void *)&cmd_config_rx_mode_flag_port,
 		(void *)&cmd_config_rx_mode_flag_keyword,
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index adf3203..04dc129 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -157,6 +157,9 @@ usage(char* progname)
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 	printf("  --disable-hw-vlan: disable hardware vlan.\n");
+	printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
+	printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
+	printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
 	printf("  --enable-drop-en: enable per queue packet drop.\n");
 	printf("  --disable-rss: disable rss.\n");
 	printf("  --port-topology=N: set port topology (N: paired (default) or "
@@ -528,6 +531,9 @@ launch_args_parse(int argc, char** argv)
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
 		{ "disable-hw-vlan",            0, 0, 0 },
+		{ "disable-hw-vlan-filter",     0, 0, 0 },
+		{ "disable-hw-vlan-strip",      0, 0, 0 },
+		{ "disable-hw-vlan-extend",     0, 0, 0 },
 		{ "enable-drop-en",            0, 0, 0 },
 		{ "disable-rss",                0, 0, 0 },
 		{ "port-topology",              1, 0, 0 },
@@ -778,6 +784,18 @@ launch_args_parse(int argc, char** argv)
 				rx_mode.hw_vlan_extend = 0;
 			}
 
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-filter"))
+				rx_mode.hw_vlan_filter = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-strip"))
+				rx_mode.hw_vlan_strip  = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-extend"))
+				rx_mode.hw_vlan_extend = 0;
+
 			if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
 				rx_drop_en = 1;
 
-- 
1.8.4.2

[dpdk-dev] [PATCH v2 2/2] doc: Update for new HW vlan command

[Ouyang Changchun]

Update the testpmd doc as there are new HW VLAN commands/options.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
 doc/guides/testpmd_app_ug/run_app.rst       | 12 +++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 +++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 67f62d2..3898e67 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -262,6 +262,18 @@ They must be separated from the EAL options, shown in the previous section, with
 
     Disable hardware VLAN.
 
+*   --disable-hw-vlan-filter
+
+    Disable hardware VLAN filter.
+
+*   --disable-hw-vlan-strip
+
+    Disable hardware VLAN strip.
+
+*   --disable-hw-vlan-extend
+
+    Disable hardware VLAN extend.
+
 *   --enable-drop-en
 
     Enable per-queue packet drop for packets with no descriptors.
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 218835a..b644626 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -896,6 +896,39 @@ Hardware VLAN is on by default.
 
 The off option is equivalent to the --disable-hw-vlan command-line option.
 
+port config - VLAN filter
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN filter on or off for all ports:
+
+port config all hw-vlan-filter (on|off)
+
+Hardware VLAN filter is on by default.
+
+The off option is equivalent to the --disable-hw-vlan-filter command-line option.
+
+port config - VLAN strip
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN strip on or off for all ports:
+
+port config all hw-vlan-strip (on|off)
+
+Hardware VLAN strip is on by default.
+
+The off option is equivalent to the --disable-hw-vlan-strip command-line option.
+
+port config - VLAN extend
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN extend on or off for all ports:
+
+port config all hw-vlan-extend (on|off)
+
+Hardware VLAN extend is off by default.
+
+The off option is equivalent to the --disable-hw-vlan-extend command-line option.
+
 port config - Drop Packets
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- 
1.8.4.2

Re: [dpdk-dev] [PATCH v2 0/2]

[Ouyang, Changchun]

> -----Original Message-----
> From: Ouyang, Changchun
> Sent: Friday, March 6, 2015 4:00 PM
> To: dev@dpdk.org
> Cc: Butler, Siobhan A; De Lara Guarch, Pablo; Cao, Waterman; Ouyang,
> Changchun
> Subject: [PATCH v2 0/2]
> 
> This patch enables testpmd user can config port hw_vlan with more fine
> granularity:
> hw vlan filter, hw vlan strip, and hw vlan extend;
> 
> Update testpmd doc accordingly.
> 
> Changchun Ouyang (2):
>   testpmd: HW vlan command
>   doc: Update for new HW vlan command
> 
>  app/test-pmd/cmdline.c                      | 36 ++++++++++++++++++++++++++---
>  app/test-pmd/parameters.c                   | 18 +++++++++++++++
>  doc/guides/testpmd_app_ug/run_app.rst       | 12 ++++++++++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33
> ++++++++++++++++++++++++++
>  4 files changed, 96 insertions(+), 3 deletions(-)
> 
> --
> 1.8.4.2

Self-nack it, due to missing subject.
Will send a v3 patch set.

[dpdk-dev] [PATCH v3 0/2] New HW VLAN command in testpmd

[Ouyang Changchun]

This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend;

Update testpmd doc accordingly.

Changchun Ouyang (2):
  testpmd: HW vlan command
  doc: Update for new HW vlan command

 app/test-pmd/cmdline.c                      | 36 ++++++++++++++++++++++++++---
 app/test-pmd/parameters.c                   | 18 +++++++++++++++
 doc/guides/testpmd_app_ug/run_app.rst       | 12 ++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++++++++++
 4 files changed, 96 insertions(+), 3 deletions(-)

-- 
1.8.4.2

[dpdk-dev] [PATCH v3 1/2] testpmd: HW vlan command

[Ouyang Changchun]

This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.

Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 app/test-pmd/cmdline.c    | 36 +++++++++++++++++++++++++++++++++---
 app/test-pmd/parameters.c | 18 ++++++++++++++++++
 2 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 590e427..99cc307 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -584,7 +584,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"port config all max-pkt-len (value)\n"
 			"    Set the max packet length.\n\n"
 
-			"port config all (crc-strip|rx-cksum|hw-vlan|drop-en)"
+			"port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-filter|"
+			"hw-vlan-strip|hw-vlan-extend|drop-en)"
 			" (on|off)\n"
 			"    Set crc-strip/rx-checksum/hardware-vlan/drop_en"
 			" for ports.\n\n"
@@ -1327,6 +1328,33 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
 			printf("Unknown parameter\n");
 			return;
 		}
+	} else if (!strcmp(res->name, "hw-vlan-filter")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_filter = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_filter = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-strip")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_strip  = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_strip  = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
+	} else if (!strcmp(res->name, "hw-vlan-extend")) {
+		if (!strcmp(res->value, "on"))
+			rx_mode.hw_vlan_extend = 1;
+		else if (!strcmp(res->value, "off"))
+			rx_mode.hw_vlan_extend = 0;
+		else {
+			printf("Unknown parameter\n");
+			return;
+		}
 	} else if (!strcmp(res->name, "drop-en")) {
 		if (!strcmp(res->value, "on"))
 			rx_drop_en = 1;
@@ -1355,7 +1383,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_all =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all, "all");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, name,
-					"crc-strip#rx-cksum#hw-vlan");
+					"crc-strip#rx-cksum#hw-vlan#"
+					"hw-vlan-filter#hw-vlan-strip#hw-vlan-extend");
 cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
 							"on#off");
@@ -1363,7 +1392,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
 cmdline_parse_inst_t cmd_config_rx_mode_flag = {
 	.f = cmd_config_rx_mode_flag_parsed,
 	.data = NULL,
-	.help_str = "port config all crc-strip|rx-cksum|hw-vlan on|off",
+	.help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
+		"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
 	.tokens = {
 		(void *)&cmd_config_rx_mode_flag_port,
 		(void *)&cmd_config_rx_mode_flag_keyword,
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index adf3203..04dc129 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -157,6 +157,9 @@ usage(char* progname)
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 	printf("  --disable-hw-vlan: disable hardware vlan.\n");
+	printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
+	printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
+	printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
 	printf("  --enable-drop-en: enable per queue packet drop.\n");
 	printf("  --disable-rss: disable rss.\n");
 	printf("  --port-topology=N: set port topology (N: paired (default) or "
@@ -528,6 +531,9 @@ launch_args_parse(int argc, char** argv)
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
 		{ "disable-hw-vlan",            0, 0, 0 },
+		{ "disable-hw-vlan-filter",     0, 0, 0 },
+		{ "disable-hw-vlan-strip",      0, 0, 0 },
+		{ "disable-hw-vlan-extend",     0, 0, 0 },
 		{ "enable-drop-en",            0, 0, 0 },
 		{ "disable-rss",                0, 0, 0 },
 		{ "port-topology",              1, 0, 0 },
@@ -778,6 +784,18 @@ launch_args_parse(int argc, char** argv)
 				rx_mode.hw_vlan_extend = 0;
 			}
 
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-filter"))
+				rx_mode.hw_vlan_filter = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-strip"))
+				rx_mode.hw_vlan_strip  = 0;
+
+			if (!strcmp(lgopts[opt_idx].name,
+					"disable-hw-vlan-extend"))
+				rx_mode.hw_vlan_extend = 0;
+
 			if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
 				rx_drop_en = 1;
 
-- 
1.8.4.2

[dpdk-dev] [PATCH v3 2/2] doc: Update for new HW vlan command

[Ouyang Changchun]

Update the testpmd doc as there are new HW VLAN commands/options.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
 doc/guides/testpmd_app_ug/run_app.rst       | 12 +++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 +++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 67f62d2..3898e67 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -262,6 +262,18 @@ They must be separated from the EAL options, shown in the previous section, with
 
     Disable hardware VLAN.
 
+*   --disable-hw-vlan-filter
+
+    Disable hardware VLAN filter.
+
+*   --disable-hw-vlan-strip
+
+    Disable hardware VLAN strip.
+
+*   --disable-hw-vlan-extend
+
+    Disable hardware VLAN extend.
+
 *   --enable-drop-en
 
     Enable per-queue packet drop for packets with no descriptors.
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 218835a..b644626 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -896,6 +896,39 @@ Hardware VLAN is on by default.
 
 The off option is equivalent to the --disable-hw-vlan command-line option.
 
+port config - VLAN filter
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN filter on or off for all ports:
+
+port config all hw-vlan-filter (on|off)
+
+Hardware VLAN filter is on by default.
+
+The off option is equivalent to the --disable-hw-vlan-filter command-line option.
+
+port config - VLAN strip
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN strip on or off for all ports:
+
+port config all hw-vlan-strip (on|off)
+
+Hardware VLAN strip is on by default.
+
+The off option is equivalent to the --disable-hw-vlan-strip command-line option.
+
+port config - VLAN extend
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set hardware VLAN extend on or off for all ports:
+
+port config all hw-vlan-extend (on|off)
+
+Hardware VLAN extend is off by default.
+
+The off option is equivalent to the --disable-hw-vlan-extend command-line option.
+
 port config - Drop Packets
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- 
1.8.4.2

Re: [dpdk-dev] [PATCH v3 1/2] testpmd: HW vlan command

[Qiu, Michael]

On 3/6/2015 4:11 PM, Ouyang Changchun wrote:
> This patch enables testpmd user can config port hw_vlan with more fine granularity:
> hw vlan filter, hw vlan strip, and hw vlan extend.
>
> Don't remove the original command(hw-vlan) considering that some user still want to use
> only one command to switch on/off all 3 options.
>
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> ---
>  app/test-pmd/cmdline.c    | 36 +++++++++++++++++++++++++++++++++---
>  app/test-pmd/parameters.c | 18 ++++++++++++++++++
>  2 files changed, 51 insertions(+), 3 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 590e427..99cc307 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -584,7 +584,8 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"port config all max-pkt-len (value)\n"
>  			"    Set the max packet length.\n\n"
>  
> -			"port config all (crc-strip|rx-cksum|hw-vlan|drop-en)"
> +			"port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-filter|"
> +			"hw-vlan-strip|hw-vlan-extend|drop-en)"
>  			" (on|off)\n"
>  			"    Set crc-strip/rx-checksum/hardware-vlan/drop_en"
>  			" for ports.\n\n"
> @@ -1327,6 +1328,33 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
>  			printf("Unknown parameter\n");
>  			return;
>  		}
> +	} else if (!strcmp(res->name, "hw-vlan-filter")) {
> +		if (!strcmp(res->value, "on"))
> +			rx_mode.hw_vlan_filter = 1;
> +		else if (!strcmp(res->value, "off"))
> +			rx_mode.hw_vlan_filter = 0;
> +		else {
> +			printf("Unknown parameter\n");
> +			return;
> +		}
> +	} else if (!strcmp(res->name, "hw-vlan-strip")) {
> +		if (!strcmp(res->value, "on"))
> +			rx_mode.hw_vlan_strip  = 1;
> +		else if (!strcmp(res->value, "off"))
> +			rx_mode.hw_vlan_strip  = 0;
> +		else {
> +			printf("Unknown parameter\n");
> +			return;
> +		}
> +	} else if (!strcmp(res->name, "hw-vlan-extend")) {
> +		if (!strcmp(res->value, "on"))
> +			rx_mode.hw_vlan_extend = 1;
> +		else if (!strcmp(res->value, "off"))
> +			rx_mode.hw_vlan_extend = 0;
> +		else {
> +			printf("Unknown parameter\n");
> +			return;
> +		}
>  	} else if (!strcmp(res->name, "drop-en")) {
>  		if (!strcmp(res->value, "on"))
>  			rx_drop_en = 1;
> @@ -1355,7 +1383,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_all =
>  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all, "all");
>  cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
>  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, name,
> -					"crc-strip#rx-cksum#hw-vlan");
> +					"crc-strip#rx-cksum#hw-vlan#"
> +					"hw-vlan-filter#hw-vlan-strip#hw-vlan-extend");
>  cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
>  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
>  							"on#off");
> @@ -1363,7 +1392,8 @@ cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
>  cmdline_parse_inst_t cmd_config_rx_mode_flag = {
>  	.f = cmd_config_rx_mode_flag_parsed,
>  	.data = NULL,
> -	.help_str = "port config all crc-strip|rx-cksum|hw-vlan on|off",
> +	.help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
> +		"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
>  	.tokens = {
>  		(void *)&cmd_config_rx_mode_flag_port,
>  		(void *)&cmd_config_rx_mode_flag_keyword,
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index adf3203..04dc129 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -157,6 +157,9 @@ usage(char* progname)
>  	printf("  --crc-strip: enable CRC stripping by hardware.\n");
>  	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
>  	printf("  --disable-hw-vlan: disable hardware vlan.\n");
> +	printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
> +	printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
> +	printf("  --disable-hw-vlan-extend: disable hardware vlan extend.\n");
>  	printf("  --enable-drop-en: enable per queue packet drop.\n");
>  	printf("  --disable-rss: disable rss.\n");
>  	printf("  --port-topology=N: set port topology (N: paired (default) or "
> @@ -528,6 +531,9 @@ launch_args_parse(int argc, char** argv)
>  		{ "crc-strip",                  0, 0, 0 },
>  		{ "enable-rx-cksum",            0, 0, 0 },
>  		{ "disable-hw-vlan",            0, 0, 0 },
> +		{ "disable-hw-vlan-filter",     0, 0, 0 },
> +		{ "disable-hw-vlan-strip",      0, 0, 0 },
> +		{ "disable-hw-vlan-extend",     0, 0, 0 },
>  		{ "enable-drop-en",            0, 0, 0 },

Hi,  Ouyang

Could you help to make this line the same as others?
Also below line:
{ "no-flush-rx",        0, 0, 0 },

I found that, not all of those lines use "Tab" after first field, lots
of them use white space, if all use "Tab", then will keep the same style.
 
Thanks,
Michael
>  		{ "disable-rss",                0, 0, 0 },
>  		{ "port-topology",              1, 0, 0 },
> @@ -778,6 +784,18 @@ launch_args_parse(int argc, char** argv)
>  				rx_mode.hw_vlan_extend = 0;
>  			}
>  
> +			if (!strcmp(lgopts[opt_idx].name,
> +					"disable-hw-vlan-filter"))
> +				rx_mode.hw_vlan_filter = 0;
> +
> +			if (!strcmp(lgopts[opt_idx].name,
> +					"disable-hw-vlan-strip"))
> +				rx_mode.hw_vlan_strip  = 0;
> +
> +			if (!strcmp(lgopts[opt_idx].name,
> +					"disable-hw-vlan-extend"))
> +				rx_mode.hw_vlan_extend = 0;
> +
>  			if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
>  				rx_drop_en = 1;
>  

Re: [dpdk-dev] [PATCH v3 2/2] doc: Update for new HW vlan command

[Qiu, Michael]

On 3/6/2015 4:10 PM, Ouyang Changchun wrote:
> Update the testpmd doc as there are new HW VLAN commands/options.
>
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> ---

Acked-by: Michael Qiu <michael.qiu@intel.com>

>  doc/guides/testpmd_app_ug/run_app.rst       | 12 +++++++++++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 +++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
>
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
> index 67f62d2..3898e67 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -262,6 +262,18 @@ They must be separated from the EAL options, shown in the previous section, with
>  
>      Disable hardware VLAN.
>  
> +*   --disable-hw-vlan-filter
> +
> +    Disable hardware VLAN filter.
> +
> +*   --disable-hw-vlan-strip
> +
> +    Disable hardware VLAN strip.
> +
> +*   --disable-hw-vlan-extend
> +
> +    Disable hardware VLAN extend.
> +
>  *   --enable-drop-en
>  
>      Enable per-queue packet drop for packets with no descriptors.
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 218835a..b644626 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -896,6 +896,39 @@ Hardware VLAN is on by default.
>  
>  The off option is equivalent to the --disable-hw-vlan command-line option.
>  
> +port config - VLAN filter
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN filter on or off for all ports:
> +
> +port config all hw-vlan-filter (on|off)
> +
> +Hardware VLAN filter is on by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-filter command-line option.
> +
> +port config - VLAN strip
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN strip on or off for all ports:
> +
> +port config all hw-vlan-strip (on|off)
> +
> +Hardware VLAN strip is on by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-strip command-line option.
> +
> +port config - VLAN extend
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN extend on or off for all ports:
> +
> +port config all hw-vlan-extend (on|off)
> +
> +Hardware VLAN extend is off by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-extend command-line option.
> +
>  port config - Drop Packets
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~
>  

Re: [dpdk-dev] [PATCH v3 1/2] testpmd: HW vlan command

[Ouyang, Changchun]

Hi Michael,

> -----Original Message-----
> From: Qiu, Michael
> Sent: Friday, March 6, 2015 4:23 PM
> To: Ouyang, Changchun; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3 1/2] testpmd: HW vlan command
> 
> On 3/6/2015 4:11 PM, Ouyang Changchun wrote:
> > This patch enables testpmd user can config port hw_vlan with more fine
> granularity:
> > hw vlan filter, hw vlan strip, and hw vlan extend.
> >
> > Don't remove the original command(hw-vlan) considering that some user
> > still want to use only one command to switch on/off all 3 options.
> >
> > Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> > Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > ---
> >  app/test-pmd/cmdline.c    | 36
> +++++++++++++++++++++++++++++++++---
> >  app/test-pmd/parameters.c | 18 ++++++++++++++++++
> >  2 files changed, 51 insertions(+), 3 deletions(-)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> > 590e427..99cc307 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -584,7 +584,8 @@ static void cmd_help_long_parsed(void
> *parsed_result,
> >  			"port config all max-pkt-len (value)\n"
> >  			"    Set the max packet length.\n\n"
> >
> > -			"port config all (crc-strip|rx-cksum|hw-vlan|drop-
> en)"
> > +			"port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-
> filter|"
> > +			"hw-vlan-strip|hw-vlan-extend|drop-en)"
> >  			" (on|off)\n"
> >  			"    Set crc-strip/rx-checksum/hardware-
> vlan/drop_en"
> >  			" for ports.\n\n"
> > @@ -1327,6 +1328,33 @@ cmd_config_rx_mode_flag_parsed(void
> *parsed_result,
> >  			printf("Unknown parameter\n");
> >  			return;
> >  		}
> > +	} else if (!strcmp(res->name, "hw-vlan-filter")) {
> > +		if (!strcmp(res->value, "on"))
> > +			rx_mode.hw_vlan_filter = 1;
> > +		else if (!strcmp(res->value, "off"))
> > +			rx_mode.hw_vlan_filter = 0;
> > +		else {
> > +			printf("Unknown parameter\n");
> > +			return;
> > +		}
> > +	} else if (!strcmp(res->name, "hw-vlan-strip")) {
> > +		if (!strcmp(res->value, "on"))
> > +			rx_mode.hw_vlan_strip  = 1;
> > +		else if (!strcmp(res->value, "off"))
> > +			rx_mode.hw_vlan_strip  = 0;
> > +		else {
> > +			printf("Unknown parameter\n");
> > +			return;
> > +		}
> > +	} else if (!strcmp(res->name, "hw-vlan-extend")) {
> > +		if (!strcmp(res->value, "on"))
> > +			rx_mode.hw_vlan_extend = 1;
> > +		else if (!strcmp(res->value, "off"))
> > +			rx_mode.hw_vlan_extend = 0;
> > +		else {
> > +			printf("Unknown parameter\n");
> > +			return;
> > +		}
> >  	} else if (!strcmp(res->name, "drop-en")) {
> >  		if (!strcmp(res->value, "on"))
> >  			rx_drop_en = 1;
> > @@ -1355,7 +1383,8 @@ cmdline_parse_token_string_t
> cmd_config_rx_mode_flag_all =
> >  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all,
> > "all");  cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
> >  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag,
> name,
> > -					"crc-strip#rx-cksum#hw-vlan");
> > +					"crc-strip#rx-cksum#hw-vlan#"
> > +					"hw-vlan-filter#hw-vlan-strip#hw-
> vlan-extend");
> >  cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
> >  	TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
> >  							"on#off");
> > @@ -1363,7 +1392,8 @@ cmdline_parse_token_string_t
> > cmd_config_rx_mode_flag_value =  cmdline_parse_inst_t
> cmd_config_rx_mode_flag = {
> >  	.f = cmd_config_rx_mode_flag_parsed,
> >  	.data = NULL,
> > -	.help_str = "port config all crc-strip|rx-cksum|hw-vlan on|off",
> > +	.help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
> > +		"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
> >  	.tokens = {
> >  		(void *)&cmd_config_rx_mode_flag_port,
> >  		(void *)&cmd_config_rx_mode_flag_keyword,
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index adf3203..04dc129 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -157,6 +157,9 @@ usage(char* progname)
> >  	printf("  --crc-strip: enable CRC stripping by hardware.\n");
> >  	printf("  --enable-rx-cksum: enable rx hardware checksum
> offload.\n");
> >  	printf("  --disable-hw-vlan: disable hardware vlan.\n");
> > +	printf("  --disable-hw-vlan-filter: disable hardware vlan filter.\n");
> > +	printf("  --disable-hw-vlan-strip: disable hardware vlan strip.\n");
> > +	printf("  --disable-hw-vlan-extend: disable hardware vlan
> > +extend.\n");
> >  	printf("  --enable-drop-en: enable per queue packet drop.\n");
> >  	printf("  --disable-rss: disable rss.\n");
> >  	printf("  --port-topology=N: set port topology (N: paired (default) or "
> > @@ -528,6 +531,9 @@ launch_args_parse(int argc, char** argv)
> >  		{ "crc-strip",                  0, 0, 0 },
> >  		{ "enable-rx-cksum",            0, 0, 0 },
> >  		{ "disable-hw-vlan",            0, 0, 0 },
> > +		{ "disable-hw-vlan-filter",     0, 0, 0 },
> > +		{ "disable-hw-vlan-strip",      0, 0, 0 },
> > +		{ "disable-hw-vlan-extend",     0, 0, 0 },
> >  		{ "enable-drop-en",            0, 0, 0 },
> 
> Hi,  Ouyang
> 
> Could you help to make this line the same as others?
> Also below line:
> { "no-flush-rx",        0, 0, 0 },
> 
> I found that, not all of those lines use "Tab" after first field, lots of them use
> white space, if all use "Tab", then will keep the same style.
> 

It should be another separate patch to do such kind of code cleanup work, not necessary in this patch,
Actually these 3 lines align very well with codes above and below them.

Thanks
Changchun

Re: [dpdk-dev] [PATCH v3 2/2] doc: Update for new HW vlan command

[Butler, Siobhan A]

> -----Original Message-----
> From: Ouyang, Changchun
> Sent: Friday, March 6, 2015 8:10 AM
> To: dev@dpdk.org
> Cc: Butler, Siobhan A; De Lara Guarch, Pablo; Cao, Waterman; Ouyang,
> Changchun
> Subject: [PATCH v3 2/2] doc: Update for new HW vlan command
> 
> Update the testpmd doc as there are new HW VLAN commands/options.
> 
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> ---
>  doc/guides/testpmd_app_ug/run_app.rst       | 12 +++++++++++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33
> +++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
> 
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> b/doc/guides/testpmd_app_ug/run_app.rst
> index 67f62d2..3898e67 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -262,6 +262,18 @@ They must be separated from the EAL options,
> shown in the previous section, with
> 
>      Disable hardware VLAN.
> 
> +*   --disable-hw-vlan-filter
> +
> +    Disable hardware VLAN filter.
> +
> +*   --disable-hw-vlan-strip
> +
> +    Disable hardware VLAN strip.
> +
> +*   --disable-hw-vlan-extend
> +
> +    Disable hardware VLAN extend.
> +
>  *   --enable-drop-en
> 
>      Enable per-queue packet drop for packets with no descriptors.
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 218835a..b644626 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -896,6 +896,39 @@ Hardware VLAN is on by default.
> 
>  The off option is equivalent to the --disable-hw-vlan command-line option.
> 
> +port config - VLAN filter
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN filter on or off for all ports:
> +
> +port config all hw-vlan-filter (on|off)
> +
> +Hardware VLAN filter is on by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-filter command-line
> option.
> +
> +port config - VLAN strip
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN strip on or off for all ports:
> +
> +port config all hw-vlan-strip (on|off)
> +
> +Hardware VLAN strip is on by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-strip command-line
> option.
> +
> +port config - VLAN extend
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Set hardware VLAN extend on or off for all ports:
> +
> +port config all hw-vlan-extend (on|off)
> +
> +Hardware VLAN extend is off by default.
> +
> +The off option is equivalent to the --disable-hw-vlan-extend command-line
> option.
> +
>  port config - Drop Packets
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> --
> 1.8.4.2

Acked-by Siobhan Butler <siobhan.a.butler@intel.com>

Re: [dpdk-dev] [PATCH v3 0/2] New HW VLAN command in testpmd

[Thomas Monjalon]

> This patch enables testpmd user can config port hw_vlan with more fine granularity:
> hw vlan filter, hw vlan strip, and hw vlan extend;
> 
> Update testpmd doc accordingly.
> 
> Changchun Ouyang (2):
>   testpmd: HW vlan command
>   doc: Update for new HW vlan command

It may help in validation of this release.
Applied, thanks