From: Vlad Zolotarov <vladz@cloudius-systems.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 1/3] ixgbe: Cleanups
Date: Mon, 9 Mar 2015 12:20:31 +0200 [thread overview]
Message-ID: <1425896433-12452-2-git-send-email-vladz@cloudius-systems.com> (raw)
In-Reply-To: <1425896433-12452-1-git-send-email-vladz@cloudius-systems.com>
- Removed the not needed casting.
- ixgbe_dev_rx_init(): shorten the lines by defining a local alias variable to access
&dev->data->dev_conf.rxmode.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
---
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 72c65df..609b5fd 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1032,8 +1032,7 @@ ixgbe_rx_alloc_bufs(struct igb_rx_queue *rxq)
int diag, i;
/* allocate buffers in bulk directly into the S/W ring */
- alloc_idx = (uint16_t)(rxq->rx_free_trigger -
- (rxq->rx_free_thresh - 1));
+ alloc_idx = rxq->rx_free_trigger - (rxq->rx_free_thresh - 1);
rxep = &rxq->sw_ring[alloc_idx];
diag = rte_mempool_get_bulk(rxq->mb_pool, (void *)rxep,
rxq->rx_free_thresh);
@@ -1061,10 +1060,9 @@ ixgbe_rx_alloc_bufs(struct igb_rx_queue *rxq)
IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, rxq->rx_free_trigger);
/* update state of internal queue structure */
- rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_trigger +
- rxq->rx_free_thresh);
+ rxq->rx_free_trigger = rxq->rx_free_trigger + rxq->rx_free_thresh;
if (rxq->rx_free_trigger >= rxq->nb_rx_desc)
- rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_thresh - 1);
+ rxq->rx_free_trigger = rxq->rx_free_thresh - 1;
/* no errors */
return 0;
@@ -3560,6 +3558,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
uint32_t rxcsum;
uint16_t buf_size;
uint16_t i;
+ struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
PMD_INIT_FUNC_TRACE();
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -3582,7 +3581,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
* Configure CRC stripping, if any.
*/
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
- if (dev->data->dev_conf.rxmode.hw_strip_crc)
+ if (rx_conf->hw_strip_crc)
hlreg0 |= IXGBE_HLREG0_RXCRCSTRP;
else
hlreg0 &= ~IXGBE_HLREG0_RXCRCSTRP;
@@ -3590,11 +3589,11 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
/*
* Configure jumbo frame support, if any.
*/
- if (dev->data->dev_conf.rxmode.jumbo_frame == 1) {
+ if (rx_conf->jumbo_frame == 1) {
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
maxfrs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
maxfrs &= 0x0000FFFF;
- maxfrs |= (dev->data->dev_conf.rxmode.max_rx_pkt_len << 16);
+ maxfrs |= (rx_conf->max_rx_pkt_len << 16);
IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, maxfrs);
} else
hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
@@ -3618,9 +3617,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
* Reset crc_len in case it was changed after queue setup by a
* call to configure.
*/
- rxq->crc_len = (uint8_t)
- ((dev->data->dev_conf.rxmode.hw_strip_crc) ? 0 :
- ETHER_CRC_LEN);
+ rxq->crc_len = rx_conf->hw_strip_crc ? 0 : ETHER_CRC_LEN;
/* Setup the Base and Length of the Rx Descriptor Rings */
bus_addr = rxq->rx_ring_phys_addr;
@@ -3638,7 +3635,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
/*
* Configure Header Split
*/
- if (dev->data->dev_conf.rxmode.header_split) {
+ if (rx_conf->header_split) {
if (hw->mac.type == ixgbe_mac_82599EB) {
/* Must setup the PSRTYPE register */
uint32_t psrtype;
@@ -3648,7 +3645,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
IXGBE_PSRTYPE_IPV6HDR;
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx), psrtype);
}
- srrctl = ((dev->data->dev_conf.rxmode.split_hdr_size <<
+ srrctl = ((rx_conf->split_hdr_size <<
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
IXGBE_SRRCTL_BSIZEHDR_MASK);
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
@@ -3699,7 +3696,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
*/
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
rxcsum |= IXGBE_RXCSUM_PCSD;
- if (dev->data->dev_conf.rxmode.hw_ip_checksum)
+ if (rx_conf->hw_ip_checksum)
rxcsum |= IXGBE_RXCSUM_IPPCSE;
else
rxcsum &= ~IXGBE_RXCSUM_IPPCSE;
@@ -3709,7 +3706,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
if (hw->mac.type == ixgbe_mac_82599EB ||
hw->mac.type == ixgbe_mac_X540) {
rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
- if (dev->data->dev_conf.rxmode.hw_strip_crc)
+ if (rx_conf->hw_strip_crc)
rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
else
rdrxctl &= ~IXGBE_RDRXCTL_CRCSTRIP;
--
2.1.0
next prev parent reply other threads:[~2015-03-09 10:20 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-09 10:20 [dpdk-dev] [PATCH v5 0/3]This series adds the missing flow for enabling the LRO in the ethdev and Vlad Zolotarov
2015-03-09 10:20 ` Vlad Zolotarov [this message]
2015-03-09 10:49 ` [dpdk-dev] [PATCH v5 1/3] ixgbe: Cleanups Ananyev, Konstantin
2015-03-09 11:09 ` Pawel Wodkowski
2015-03-09 11:29 ` Ananyev, Konstantin
2015-03-09 15:57 ` Vlad Zolotarov
2015-03-09 16:39 ` Ananyev, Konstantin
2015-03-09 17:13 ` Vladislav Zolotarov
2015-03-09 18:00 ` Mcnamara, John
2015-03-09 18:21 ` Vladislav Zolotarov
2015-03-09 18:21 ` Vladislav Zolotarov
[not found] ` <2601191342CEEE43887BDE71AB977258213F4F13@irsmsx105.ger.corp.intel.com>
2015-03-09 19:13 ` Ananyev, Konstantin
2015-03-09 19:32 ` Vlad Zolotarov
2015-03-09 19:36 ` Ananyev, Konstantin
2015-03-09 12:53 ` Vlad Zolotarov
2015-03-09 10:20 ` [dpdk-dev] [PATCH v5 2/3] ixgbe: Code refactoring Vlad Zolotarov
2015-03-09 10:20 ` [dpdk-dev] [PATCH v5 3/3] ixgbe: Add LRO support Vlad Zolotarov
2015-03-09 10:46 ` [dpdk-dev] [PATCH v5 0/3]This series adds the missing flow for enabling the LRO in the ethdev and Vlad Zolotarov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425896433-12452-2-git-send-email-vladz@cloudius-systems.com \
--to=vladz@cloudius-systems.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).