DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] cast used->idx to volatile
@ 2015-03-21  8:07 linhaifeng
  2015-03-23  2:29 ` Linhaifeng
  2015-03-23 12:23 ` Linhaifeng
  0 siblings, 2 replies; 13+ messages in thread
From: linhaifeng @ 2015-03-21  8:07 UTC (permalink / raw)
  To: dev

From: Linhaifeng <haifeng.lin@huawei.com>

Same as rte_vhost_enqueue_burst we should cast used->idx
to volatile before notify guest.

Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
---
 lib/librte_vhost/vhost_rxtx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
index 535c7a1..8d674d1 100644
--- a/lib/librte_vhost/vhost_rxtx.c
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
 	}
 
 	rte_compiler_barrier();
-	vq->used->idx += entry_success;
+	*(volatile uint16_t *)&vq->used->idx += entry_success;
 	/* Kick guest if required. */
 	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
 		eventfd_write((int)vq->callfd, 1);
-- 
1.8.5.2.msysgit.0

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-21  8:07 [dpdk-dev] [PATCH] cast used->idx to volatile linhaifeng
@ 2015-03-23  2:29 ` Linhaifeng
  2015-03-23 12:23 ` Linhaifeng
  1 sibling, 0 replies; 13+ messages in thread
From: Linhaifeng @ 2015-03-23  2:29 UTC (permalink / raw)
  To: dev

cc changchun.ouyang@intel.com
cc huawei.xie@intel.com

On 2015/3/21 16:07, linhaifeng wrote:
> From: Linhaifeng <haifeng.lin@huawei.com>
> 
> Same as rte_vhost_enqueue_burst we should cast used->idx
> to volatile before notify guest.
> 
> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
> ---
>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> index 535c7a1..8d674d1 100644
> --- a/lib/librte_vhost/vhost_rxtx.c
> +++ b/lib/librte_vhost/vhost_rxtx.c
> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
>  	}
>  
>  	rte_compiler_barrier();
> -	vq->used->idx += entry_success;
> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>  	/* Kick guest if required. */
>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>  		eventfd_write((int)vq->callfd, 1);
> 

-- 
Regards,
Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-21  8:07 [dpdk-dev] [PATCH] cast used->idx to volatile linhaifeng
  2015-03-23  2:29 ` Linhaifeng
@ 2015-03-23 12:23 ` Linhaifeng
  2015-03-23 12:54   ` Xie, Huawei
  1 sibling, 1 reply; 13+ messages in thread
From: Linhaifeng @ 2015-03-23 12:23 UTC (permalink / raw)
  To: dev



On 2015/3/21 16:07, linhaifeng wrote:
> From: Linhaifeng <haifeng.lin@huawei.com>
> 
> Same as rte_vhost_enqueue_burst we should cast used->idx
> to volatile before notify guest.
> 
> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
> ---
>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> index 535c7a1..8d674d1 100644
> --- a/lib/librte_vhost/vhost_rxtx.c
> +++ b/lib/librte_vhost/vhost_rxtx.c
> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
>  	}
>  
>  	rte_compiler_barrier();
> -	vq->used->idx += entry_success;
> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>  	/* Kick guest if required. */
>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>  		eventfd_write((int)vq->callfd, 1);
> 

-- 
Regards,
Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-23 12:23 ` Linhaifeng
@ 2015-03-23 12:54   ` Xie, Huawei
  2015-03-24  0:59     ` Linhaifeng
  0 siblings, 1 reply; 13+ messages in thread
From: Xie, Huawei @ 2015-03-23 12:54 UTC (permalink / raw)
  To: Linhaifeng, dev



> -----Original Message-----
> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
> Sent: Monday, March 23, 2015 8:24 PM
> To: dev@dpdk.org
> Cc: Ouyang, Changchun; Xie, Huawei
> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
> 
> 
> 
> On 2015/3/21 16:07, linhaifeng wrote:
> > From: Linhaifeng <haifeng.lin@huawei.com>
> >
> > Same as rte_vhost_enqueue_burst we should cast used->idx
> > to volatile before notify guest.
> >
> > Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
> > ---
> >  lib/librte_vhost/vhost_rxtx.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> > index 535c7a1..8d674d1 100644
> > --- a/lib/librte_vhost/vhost_rxtx.c
> > +++ b/lib/librte_vhost/vhost_rxtx.c
> > @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
> uint16_t queue_id,
> >  	}
> >
> >  	rte_compiler_barrier();
> > -	vq->used->idx += entry_success;
> > +	*(volatile uint16_t *)&vq->used->idx += entry_success;


Haifeng:
We have compiler barrier before and an external function call behind, so we don't need volatile  here.
Do you meet issue?

> >  	/* Kick guest if required. */
> >  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
> >  		eventfd_write((int)vq->callfd, 1);
> >
> 
> --
> Regards,
> Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-23 12:54   ` Xie, Huawei
@ 2015-03-24  0:59     ` Linhaifeng
  2015-03-24  1:53       ` Xie, Huawei
  0 siblings, 1 reply; 13+ messages in thread
From: Linhaifeng @ 2015-03-24  0:59 UTC (permalink / raw)
  To: Xie, Huawei; +Cc: dev



On 2015/3/23 20:54, Xie, Huawei wrote:
> 
> 
>> -----Original Message-----
>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>> Sent: Monday, March 23, 2015 8:24 PM
>> To: dev@dpdk.org
>> Cc: Ouyang, Changchun; Xie, Huawei
>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>
>>
>>
>> On 2015/3/21 16:07, linhaifeng wrote:
>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>
>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>> to volatile before notify guest.
>>>
>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>> ---
>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>> index 535c7a1..8d674d1 100644
>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>> uint16_t queue_id,
>>>  	}
>>>
>>>  	rte_compiler_barrier();
>>> -	vq->used->idx += entry_success;
>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
> 
> 
> Haifeng:
> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
> Do you meet issue?
> 

Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
though vhost haven't handle all packets so we have to restart VM to restore work.

The status in VM is:
Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1

Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.

>>>  	/* Kick guest if required. */
>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>  		eventfd_write((int)vq->callfd, 1);
>>>
>>
>> --
>> Regards,
>> Haifeng
> 
> 
> 

-- 
Regards,
Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-24  0:59     ` Linhaifeng
@ 2015-03-24  1:53       ` Xie, Huawei
  2015-03-24  7:43         ` Linhaifeng
  0 siblings, 1 reply; 13+ messages in thread
From: Xie, Huawei @ 2015-03-24  1:53 UTC (permalink / raw)
  To: Linhaifeng; +Cc: dev

On 3/24/2015 9:00 AM, Linhaifeng wrote:
>
> On 2015/3/23 20:54, Xie, Huawei wrote:
>>
>>> -----Original Message-----
>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>> Sent: Monday, March 23, 2015 8:24 PM
>>> To: dev@dpdk.org
>>> Cc: Ouyang, Changchun; Xie, Huawei
>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>
>>>
>>>
>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>
>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>> to volatile before notify guest.
>>>>
>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>> ---
>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>> index 535c7a1..8d674d1 100644
>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>> uint16_t queue_id,
>>>>  	}
>>>>
>>>>  	rte_compiler_barrier();
>>>> -	vq->used->idx += entry_success;
>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>
>> Haifeng:
>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>> Do you meet issue?
>>
> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
> though vhost haven't handle all packets so we have to restart VM to restore work.
>
> The status in VM is:
> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>
> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
compiler barrier always works regardless of the optimization option.
I don't get your story, but the key thing is, do you check the asm code?
If called from outside as an API, how is it possible it is optimized?
there is only one update to used->idx in that function.
>
>>>>  	/* Kick guest if required. */
>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>
>>> --
>>> Regards,
>>> Haifeng
>>
>>


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-24  1:53       ` Xie, Huawei
@ 2015-03-24  7:43         ` Linhaifeng
  2015-03-24 10:06           ` Xie, Huawei
  0 siblings, 1 reply; 13+ messages in thread
From: Linhaifeng @ 2015-03-24  7:43 UTC (permalink / raw)
  To: Xie, Huawei; +Cc: dev



On 2015/3/24 9:53, Xie, Huawei wrote:
> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>
>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>
>>>> -----Original Message-----
>>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>>> Sent: Monday, March 23, 2015 8:24 PM
>>>> To: dev@dpdk.org
>>>> Cc: Ouyang, Changchun; Xie, Huawei
>>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>>
>>>>
>>>>
>>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>>
>>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>>> to volatile before notify guest.
>>>>>
>>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>>> ---
>>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>>> index 535c7a1..8d674d1 100644
>>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>>> uint16_t queue_id,
>>>>>  	}
>>>>>
>>>>>  	rte_compiler_barrier();
>>>>> -	vq->used->idx += entry_success;
>>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>>
>>> Haifeng:
>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>> Do you meet issue?
>>>
>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>
>> The status in VM is:
>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>
>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
> compiler barrier always works regardless of the optimization option.
> I don't get your story, but the key thing is, do you check the asm code?
> If called from outside as an API, how is it possible it is optimized?
> there is only one update to used->idx in that function.


Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?

>>
>>>>>  	/* Kick guest if required. */
>>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>>
>>>> --
>>>> Regards,
>>>> Haifeng
>>>
>>>
> 
> 
> .
> 

-- 
Regards,
Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-24  7:43         ` Linhaifeng
@ 2015-03-24 10:06           ` Xie, Huawei
  2015-03-24 12:28             ` Linhaifeng
  2015-03-30  9:20             ` Linhaifeng
  0 siblings, 2 replies; 13+ messages in thread
From: Xie, Huawei @ 2015-03-24 10:06 UTC (permalink / raw)
  To: Linhaifeng; +Cc: dev

On 3/24/2015 3:44 PM, Linhaifeng wrote:
>
> On 2015/3/24 9:53, Xie, Huawei wrote:
>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>>> -----Original Message-----
>>>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>>>> Sent: Monday, March 23, 2015 8:24 PM
>>>>> To: dev@dpdk.org
>>>>> Cc: Ouyang, Changchun; Xie, Huawei
>>>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>>>
>>>>>
>>>>>
>>>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>
>>>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>>>> to volatile before notify guest.
>>>>>>
>>>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>>>> ---
>>>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>>>> index 535c7a1..8d674d1 100644
>>>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>>>> uint16_t queue_id,
>>>>>>  	}
>>>>>>
>>>>>>  	rte_compiler_barrier();
>>>>>> -	vq->used->idx += entry_success;
>>>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>>> Haifeng:
>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>>> Do you meet issue?
>>>>
>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>>
>>> The status in VM is:
>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>>
>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
>> compiler barrier always works regardless of the optimization option.
>> I don't get your story, but the key thing is, do you check the asm code?
>> If called from outside as an API, how is it possible it is optimized?
>> there is only one update to used->idx in that function.
>
> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
I checked the code. Seems we can remove. That is another issue.
For your issue, you meet problem, and submit this this patch, but i am a
bit confused it is the root cause. Do you check the asm code that
volatile is optimized?

>>>>>>  	/* Kick guest if required. */
>>>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>>>
>>>>> --
>>>>> Regards,
>>>>> Haifeng
>>>>
>>
>> .
>>


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-24 10:06           ` Xie, Huawei
@ 2015-03-24 12:28             ` Linhaifeng
  2015-03-30  9:20             ` Linhaifeng
  1 sibling, 0 replies; 13+ messages in thread
From: Linhaifeng @ 2015-03-24 12:28 UTC (permalink / raw)
  To: Xie, Huawei; +Cc: dev



On 2015/3/24 18:06, Xie, Huawei wrote:
> On 3/24/2015 3:44 PM, Linhaifeng wrote:
>>
>> On 2015/3/24 9:53, Xie, Huawei wrote:
>>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>>>> -----Original Message-----
>>>>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>>>>> Sent: Monday, March 23, 2015 8:24 PM
>>>>>> To: dev@dpdk.org
>>>>>> Cc: Ouyang, Changchun; Xie, Huawei
>>>>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>>
>>>>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>>>>> to volatile before notify guest.
>>>>>>>
>>>>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>> ---
>>>>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>>>>> index 535c7a1..8d674d1 100644
>>>>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>>>>> uint16_t queue_id,
>>>>>>>  	}
>>>>>>>
>>>>>>>  	rte_compiler_barrier();
>>>>>>> -	vq->used->idx += entry_success;
>>>>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>>>> Haifeng:
>>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>>>> Do you meet issue?
>>>>>
>>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>>>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>>>
>>>> The status in VM is:
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>>>
>>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
>>> compiler barrier always works regardless of the optimization option.
>>> I don't get your story, but the key thing is, do you check the asm code?
>>> If called from outside as an API, how is it possible it is optimized?
>>> there is only one update to used->idx in that function.
>>
>> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
> I checked the code. Seems we can remove. That is another issue.
> For your issue, you meet problem, and submit this this patch, but i am a
> bit confused it is the root cause. Do you check the asm code that
> volatile is optimized?

I'm not sure about this too.How to check volatile is optimized?

> 
>>>>>>>  	/* Kick guest if required. */
>>>>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>>>>
>>>>>> --
>>>>>> Regards,
>>>>>> Haifeng
>>>>>
>>>
>>> .
>>>
> 
> 
> .
> 

-- 
Regards,
Haifeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-24 10:06           ` Xie, Huawei
  2015-03-24 12:28             ` Linhaifeng
@ 2015-03-30  9:20             ` Linhaifeng
  2015-03-30 15:56               ` Xie, Huawei
  1 sibling, 1 reply; 13+ messages in thread
From: Linhaifeng @ 2015-03-30  9:20 UTC (permalink / raw)
  To: Xie, Huawei; +Cc: dev



On 2015/3/24 18:06, Xie, Huawei wrote:
> On 3/24/2015 3:44 PM, Linhaifeng wrote:
>>
>> On 2015/3/24 9:53, Xie, Huawei wrote:
>>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>>>> -----Original Message-----
>>>>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>>>>> Sent: Monday, March 23, 2015 8:24 PM
>>>>>> To: dev@dpdk.org
>>>>>> Cc: Ouyang, Changchun; Xie, Huawei
>>>>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>>
>>>>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>>>>> to volatile before notify guest.
>>>>>>>
>>>>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>> ---
>>>>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>>>>> index 535c7a1..8d674d1 100644
>>>>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>>>>> uint16_t queue_id,
>>>>>>>  	}
>>>>>>>
>>>>>>>  	rte_compiler_barrier();
>>>>>>> -	vq->used->idx += entry_success;
>>>>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>>>> Haifeng:
>>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>>>> Do you meet issue?
>>>>>
>>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>>>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>>>
>>>> The status in VM is:
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>>>
>>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
>>> compiler barrier always works regardless of the optimization option.
>>> I don't get your story, but the key thing is, do you check the asm code?
>>> If called from outside as an API, how is it possible it is optimized?
>>> there is only one update to used->idx in that function.
>>
>> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
> I checked the code. Seems we can remove. That is another issue.
> For your issue, you meet problem, and submit this this patch, but i am a
> bit confused it is the root cause. Do you check the asm code that
> volatile is optimized?
> 

I had wrote a demo try to find out the different between rte_compiler_barrier and volatile.
It seems no any effect on rte_compiler_barrier().

-------->test1: without rte_compiler_barrier and volatile

#include <rte_atomic.h>

int main()
{
        int i,j;

        *(int*)&i = 2;
        *(int*)&j = 3;
        printf("i=%d j=%d", i, j);
}
linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
        .file   "test.c"
        .section        .rodata.str1.1,"aMS",@progbits,1
.LC0:
        .string "i=%d j=%d"
        .text
        .p2align 4,,15
.globl main
        .type   main, @function
main:
.LFB571:
        movl    $3, %edx
        movl    $2, %esi
        movl    $.LC0, %edi
        xorl    %eax, %eax
        jmp     printf
.LFE571:
        .size   main, .-main
		
		
-------->test2: use rte_compiler_barrier
note: the asm code same as test1
		
linux-LOubNs:/mnt/sdc/linhf/test # cat test.c
#include <stdio.h>
#include <rte_atomic.h>

int main()
{
        int i,j;

        *(int*)&i = 2;
        rte_compiler_barrier();
        *(int*)&j = 3;
        printf("i=%d j=%d", i, j);
}
linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
        .file   "test.c"
        .section        .rodata.str1.1,"aMS",@progbits,1
.LC0:
        .string "i=%d j=%d"
        .text
        .p2align 4,,15
.globl main
        .type   main, @function
main:
.LFB571:
        movl    $3, %edx
        movl    $2, %esi
        movl    $.LC0, %edi
        xorl    %eax, %eax
        jmp     printf
.LFE571:
        .size   main, .-main

		
-------->test3: use volatile
		
linux-LOubNs:/mnt/sdc/linhf/test # cat test.c
#include <stdio.h>
#include <rte_atomic.h>

int main()
{
        int i,j;

        *(volatile int*)&i = 2;
        *(volatile int*)&j = 3;
        printf("i=%d j=%d", i, j);
}
linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
        .file   "test.c"
        .section        .rodata.str1.1,"aMS",@progbits,1
.LC0:
        .string "i=%d j=%d"
        .text
        .p2align 4,,15
.globl main
        .type   main, @function
main:
.LFB571:
        movl    $2, -4(%rsp)
        movl    $3, -8(%rsp)
        movl    $.LC0, %edi
        movl    -8(%rsp), %edx
        movl    -4(%rsp), %esi
        xorl    %eax, %eax
        jmp     printf
.LFE571:
        .size   main, .-main

>>>>>>>  	/* Kick guest if required. */
>>>>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>>>>
>>>>>> --
>>>>>> Regards,
>>>>>> Haifeng
>>>>>
>>>
>>> .
>>>
> 
> 
> .
> 

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-30  9:20             ` Linhaifeng
@ 2015-03-30 15:56               ` Xie, Huawei
  2015-04-01  7:50                 ` Thomas Monjalon
  0 siblings, 1 reply; 13+ messages in thread
From: Xie, Huawei @ 2015-03-30 15:56 UTC (permalink / raw)
  To: Linhaifeng; +Cc: dev

On 3/30/2015 5:21 PM, Linhaifeng wrote:
>
> On 2015/3/24 18:06, Xie, Huawei wrote:
>> On 3/24/2015 3:44 PM, Linhaifeng wrote:
>>> On 2015/3/24 9:53, Xie, Huawei wrote:
>>>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>>>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>>>>> -----Original Message-----
>>>>>>> From: Linhaifeng [mailto:haifeng.lin@huawei.com]
>>>>>>> Sent: Monday, March 23, 2015 8:24 PM
>>>>>>> To: dev@dpdk.org
>>>>>>> Cc: Ouyang, Changchun; Xie, Huawei
>>>>>>> Subject: Re: [dpdk-dev] [PATCH] cast used->idx to volatile
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 2015/3/21 16:07, linhaifeng wrote:
>>>>>>>> From: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>>>
>>>>>>>> Same as rte_vhost_enqueue_burst we should cast used->idx
>>>>>>>> to volatile before notify guest.
>>>>>>>>
>>>>>>>> Signed-off-by: Linhaifeng <haifeng.lin@huawei.com>
>>>>>>>> ---
>>>>>>>>  lib/librte_vhost/vhost_rxtx.c | 2 +-
>>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>>
>>>>>>>> diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
>>>>>>>> index 535c7a1..8d674d1 100644
>>>>>>>> --- a/lib/librte_vhost/vhost_rxtx.c
>>>>>>>> +++ b/lib/librte_vhost/vhost_rxtx.c
>>>>>>>> @@ -722,7 +722,7 @@ rte_vhost_dequeue_burst(struct virtio_net *dev,
>>>>>>> uint16_t queue_id,
>>>>>>>>  	}
>>>>>>>>
>>>>>>>>  	rte_compiler_barrier();
>>>>>>>> -	vq->used->idx += entry_success;
>>>>>>>> +	*(volatile uint16_t *)&vq->used->idx += entry_success;
>>>>>> Haifeng:
>>>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>>>>> Do you meet issue?
>>>>>>
>>>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>>>>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>>>>
>>>>> The status in VM is:
>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>>>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>>>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>>>>
>>>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
>>>> compiler barrier always works regardless of the optimization option.
>>>> I don't get your story, but the key thing is, do you check the asm code?
>>>> If called from outside as an API, how is it possible it is optimized?
>>>> there is only one update to used->idx in that function.
>>> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
>> I checked the code. Seems we can remove. That is another issue.
>> For your issue, you meet problem, and submit this this patch, but i am a
>> bit confused it is the root cause. Do you check the asm code that
>> volatile is optimized?
>>
> I had wrote a demo try to find out the different between rte_compiler_barrier and volatile.
> It seems no any effect on rte_compiler_barrier().

Haifeng:

I think it doesn't make too much sense to use volatile for local variables.

In our rte_vhost_dequeue_burst, there is one memory write to the
used->idx, and there is compiler barrier to keep the order.
Besides, as an API, how could that memory write to be optimized as
register access?

Even if you call rte_vhost_dequeue_burst in the same src file, which
means in the same translation unit, there is function call after which
has side effect, it still couldn't be optimized.

Anyway, could we directly check the asm code of rte_vhost_dequeue_burst
to see whether it is optimized?

-huawei
>
> -------->test1: without rte_compiler_barrier and volatile
>
> #include <rte_atomic.h>
>
> int main()
> {
>         int i,j;
>
>         *(int*)&i = 2;
>         *(int*)&j = 3;
>         printf("i=%d j=%d", i, j);
> }
> linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
> linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
>         .file   "test.c"
>         .section        .rodata.str1.1,"aMS",@progbits,1
> .LC0:
>         .string "i=%d j=%d"
>         .text
>         .p2align 4,,15
> .globl main
>         .type   main, @function
> main:
> .LFB571:
>         movl    $3, %edx
>         movl    $2, %esi
>         movl    $.LC0, %edi
>         xorl    %eax, %eax
>         jmp     printf
> .LFE571:
>         .size   main, .-main
> 		
> 		
> -------->test2: use rte_compiler_barrier
> note: the asm code same as test1
> 		
> linux-LOubNs:/mnt/sdc/linhf/test # cat test.c
> #include <stdio.h>
> #include <rte_atomic.h>
>
> int main()
> {
>         int i,j;
>
>         *(int*)&i = 2;
>         rte_compiler_barrier();
>         *(int*)&j = 3;
>         printf("i=%d j=%d", i, j);
> }
> linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
> linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
>         .file   "test.c"
>         .section        .rodata.str1.1,"aMS",@progbits,1
> .LC0:
>         .string "i=%d j=%d"
>         .text
>         .p2align 4,,15
> .globl main
>         .type   main, @function
> main:
> .LFB571:
>         movl    $3, %edx
>         movl    $2, %esi
>         movl    $.LC0, %edi
>         xorl    %eax, %eax
>         jmp     printf
> .LFE571:
>         .size   main, .-main
>
> 		
> -------->test3: use volatile
> 		
> linux-LOubNs:/mnt/sdc/linhf/test # cat test.c
> #include <stdio.h>
> #include <rte_atomic.h>
>
> int main()
> {
>         int i,j;
>
>         *(volatile int*)&i = 2;
>         *(volatile int*)&j = 3;
>         printf("i=%d j=%d", i, j);
> }
> linux-LOubNs:/mnt/sdc/linhf/test # gcc -S test.c -I /usr/include/dpdk-1.7.0/x86_64-native-linuxapp-gcc/include/ -O3
> linux-LOubNs:/mnt/sdc/linhf/test # cat test.s |grep main -B 10
>         .file   "test.c"
>         .section        .rodata.str1.1,"aMS",@progbits,1
> .LC0:
>         .string "i=%d j=%d"
>         .text
>         .p2align 4,,15
> .globl main
>         .type   main, @function
> main:
> .LFB571:
>         movl    $2, -4(%rsp)
>         movl    $3, -8(%rsp)
>         movl    $.LC0, %edi
>         movl    -8(%rsp), %edx
>         movl    -4(%rsp), %esi
>         xorl    %eax, %eax
>         jmp     printf
> .LFE571:
>         .size   main, .-main
>
>>>>>>>>  	/* Kick guest if required. */
>>>>>>>>  	if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
>>>>>>>>  		eventfd_write((int)vq->callfd, 1);
>>>>>>>>
>>>>>>> --
>>>>>>> Regards,
>>>>>>> Haifeng
>>>> .
>>>>
>>
>> .
>>
>
>


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-03-30 15:56               ` Xie, Huawei
@ 2015-04-01  7:50                 ` Thomas Monjalon
  2015-04-01 14:40                   ` Xie, Huawei
  0 siblings, 1 reply; 13+ messages in thread
From: Thomas Monjalon @ 2015-04-01  7:50 UTC (permalink / raw)
  To: Xie, Huawei; +Cc: dev

2015-03-30 15:56, Xie, Huawei:
> On 3/30/2015 5:21 PM, Linhaifeng wrote:
> > On 2015/3/24 18:06, Xie, Huawei wrote:
> >> On 3/24/2015 3:44 PM, Linhaifeng wrote:
> >>> On 2015/3/24 9:53, Xie, Huawei wrote:
> >>>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
> >>>>> On 2015/3/23 20:54, Xie, Huawei wrote:
> >>>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
> >>>>>> Do you meet issue?
> >>>>>>
> >>>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
> >>>>> though vhost haven't handle all packets so we have to restart VM to restore work.
> >>>>>
> >>>>> The status in VM is:
> >>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
> >>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
> >>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
> >>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
> >>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
> >>>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
> >>>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
> >>>>>
> >>>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
> >>>> compiler barrier always works regardless of the optimization option.
> >>>> I don't get your story, but the key thing is, do you check the asm code?
> >>>> If called from outside as an API, how is it possible it is optimized?
> >>>> there is only one update to used->idx in that function.
> >>> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
> >> I checked the code. Seems we can remove. That is another issue.
> >> For your issue, you meet problem, and submit this this patch, but i am a
> >> bit confused it is the root cause. Do you check the asm code that
> >> volatile is optimized?
> >>
> > I had wrote a demo try to find out the different between rte_compiler_barrier and volatile.
> > It seems no any effect on rte_compiler_barrier().
> 
> Haifeng:
> 
> I think it doesn't make too much sense to use volatile for local variables.
> 
> In our rte_vhost_dequeue_burst, there is one memory write to the
> used->idx, and there is compiler barrier to keep the order.
> Besides, as an API, how could that memory write to be optimized as
> register access?
> 
> Even if you call rte_vhost_dequeue_burst in the same src file, which
> means in the same translation unit, there is function call after which
> has side effect, it still couldn't be optimized.
> 
> Anyway, could we directly check the asm code of rte_vhost_dequeue_burst
> to see whether it is optimized?

Conclusion is not clear. Is this patch rejected?

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH] cast used->idx to volatile
  2015-04-01  7:50                 ` Thomas Monjalon
@ 2015-04-01 14:40                   ` Xie, Huawei
  0 siblings, 0 replies; 13+ messages in thread
From: Xie, Huawei @ 2015-04-01 14:40 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev

On 4/1/2015 3:51 PM, Thomas Monjalon wrote:
> 2015-03-30 15:56, Xie, Huawei:
>> On 3/30/2015 5:21 PM, Linhaifeng wrote:
>>> On 2015/3/24 18:06, Xie, Huawei wrote:
>>>> On 3/24/2015 3:44 PM, Linhaifeng wrote:
>>>>> On 2015/3/24 9:53, Xie, Huawei wrote:
>>>>>> On 3/24/2015 9:00 AM, Linhaifeng wrote:
>>>>>>> On 2015/3/23 20:54, Xie, Huawei wrote:
>>>>>>>> We have compiler barrier before and an external function call behind, so we don't need volatile  here.
>>>>>>>> Do you meet issue?
>>>>>>>>
>>>>>>> Tx_q is sometimes stopped when we use virtio_net. Because vhost thought there are no buffers in tx_q and virtio_net
>>>>>>> though vhost haven't handle all packets so we have to restart VM to restore work.
>>>>>>>
>>>>>>> The status in VM is:
>>>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246687] net eth7: virtnet_poll
>>>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246690] net eth7: receive_buf
>>>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246693] net eth7: vi->num=239
>>>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246695] net eth7: svq:avail->idx=52939 used->idx=52939 num_free=18 num_added=0 svq->last_used_idx=52820
>>>>>>> Mar 18 17:11:10 linux-b2ij kernel: [46337.246699] net eth7: rvq:avail->idx=36215 used->idx=35977 num_free=18 num_added=0 rvq->last_used_idx=35977
>>>>>>> Mar 18 17:11:11 linux-b2ij kernel: [46337.901038] net eth7: dev_queue_xmit, qdisc->flags=4, qdisc->state deactiveed=0
>>>>>>> Mar 18 17:11:12 linux-b2ij kernel: [46337.901042] net eth7: dev_queue_xmit, txq->state=1, stopped=1
>>>>>>>
>>>>>>> Why compiler barrier not take effect in our case? Is compiler barrier depended on -O3 option? We use -O2 option.
>>>>>> compiler barrier always works regardless of the optimization option.
>>>>>> I don't get your story, but the key thing is, do you check the asm code?
>>>>>> If called from outside as an API, how is it possible it is optimized?
>>>>>> there is only one update to used->idx in that function.
>>>>> Do you mean rte_vhost_enqueue_burst also not need cast used->idx to volatile ? Why not remove it?
>>>> I checked the code. Seems we can remove. That is another issue.
>>>> For your issue, you meet problem, and submit this this patch, but i am a
>>>> bit confused it is the root cause. Do you check the asm code that
>>>> volatile is optimized?
>>>>
>>> I had wrote a demo try to find out the different between rte_compiler_barrier and volatile.
>>> It seems no any effect on rte_compiler_barrier().
>> Haifeng:
>>
>> I think it doesn't make too much sense to use volatile for local variables.
>>
>> In our rte_vhost_dequeue_burst, there is one memory write to the
>> used->idx, and there is compiler barrier to keep the order.
>> Besides, as an API, how could that memory write to be optimized as
>> register access?
>>
>> Even if you call rte_vhost_dequeue_burst in the same src file, which
>> means in the same translation unit, there is function call after which
>> has side effect, it still couldn't be optimized.
>>
>> Anyway, could we directly check the asm code of rte_vhost_dequeue_burst
>> to see whether it is optimized?
> Conclusion is not clear. Is this patch rejected?
>
>
>
so far we have no evidence the code has error so will temporarily reject it.

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2015-04-01 14:40 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-21  8:07 [dpdk-dev] [PATCH] cast used->idx to volatile linhaifeng
2015-03-23  2:29 ` Linhaifeng
2015-03-23 12:23 ` Linhaifeng
2015-03-23 12:54   ` Xie, Huawei
2015-03-24  0:59     ` Linhaifeng
2015-03-24  1:53       ` Xie, Huawei
2015-03-24  7:43         ` Linhaifeng
2015-03-24 10:06           ` Xie, Huawei
2015-03-24 12:28             ` Linhaifeng
2015-03-30  9:20             ` Linhaifeng
2015-03-30 15:56               ` Xie, Huawei
2015-04-01  7:50                 ` Thomas Monjalon
2015-04-01 14:40                   ` Xie, Huawei

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).