* [dpdk-dev] [PATCH RFC 01/10] examples/tep_termination:initialize the VXLAN example
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 02/10] examples/tep_termination:define VXLAN device information and APIs Jijiang Liu
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
This example uses the basic virtio devices management function from the vHost example, which includes virtio device creation, destroying and maintenance.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/Makefile | 1 +
examples/tep_termination/Makefile | 58 +++
examples/tep_termination/main.c | 998 +++++++++++++++++++++++++++++++++++++
examples/tep_termination/main.h | 113 +++++
4 files changed, 1170 insertions(+), 0 deletions(-)
create mode 100644 examples/tep_termination/Makefile
create mode 100644 examples/tep_termination/main.c
create mode 100644 examples/tep_termination/main.h
diff --git a/examples/Makefile b/examples/Makefile
index d549026..3f08954 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -73,5 +73,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
DIRS-y += vmdq
DIRS-y += vmdq_dcb
DIRS-y += vm_power_manager
+DIRS-y += tep_termination
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
new file mode 100644
index 0000000..23fb647
--- /dev/null
+++ b/examples/tep_termination/Makefile
@@ -0,0 +1,58 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
+$(info This application can only operate in a linuxapp environment, \
+please change the definition of the RTE_TARGET environment variable)
+all:
+else
+
+# binary name
+APP = tep_termination
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+
+endif
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
new file mode 100644
index 0000000..2e36ad0
--- /dev/null
+++ b/examples/tep_termination/main.c
@@ -0,0 +1,998 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arpa/inet.h>
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_malloc.h>
+#include <rte_virtio_net.h>
+
+#include "main.h"
+
+/* the maximum number of external ports supported */
+#define MAX_SUP_PORTS 1
+
+/*
+ * Calculate the number of buffers needed per port
+ */
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
+ (num_switching_cores*MAX_PKT_BURST) + \
+ (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
+ (num_switching_cores*MBUF_CACHE_SIZE))
+
+#define MBUF_CACHE_SIZE 128
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define BURST_RX_RETRIES 4/* Number of retries on RX. */
+
+#define JUMBO_FRAME_MAX_SIZE 0x2600
+
+/* Config_core_flag status definitions. */
+#define REQUEST_DEV_REMOVAL 1
+#define ACK_DEV_REMOVAL 0
+
+#define INVALID_PORT_ID 0xFF
+
+/* Max number of virtIO device */
+#define MAX_DEVICES 64
+
+/* Maximum character device basename size. */
+#define MAX_BASENAME_SZ 10
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+
+/* ethernet addresses of ports */
+struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
+uint8_t ports[RTE_MAX_ETHPORTS];
+
+static unsigned lcore_ids[RTE_MAX_LCORE];
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
+/*Number of switching cores enabled*/
+static uint32_t num_switching_cores = 0;
+
+struct vpool {
+ struct rte_mempool *pool;
+ struct rte_ring *ring;
+ uint32_t buf_size;
+} vpool_array[MAX_QUEUES+MAX_QUEUES];
+
+/* number of devices */
+uint16_t num_devices;
+
+/* Enable stats. */
+static uint32_t enable_stats = 0;
+
+/* Character device basename. Can be set by user. */
+static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
+
+static unsigned num_ports = 0; /**< The number of ports specified in command line */
+
+/* heads for the main used and free linked lists for the data path. */
+struct virtio_net_data_ll *ll_root_used = NULL;
+struct virtio_net_data_ll *ll_root_free = NULL;
+
+/**
+ * Array of data core structures containing information
+ * on individual core linked lists.
+ */
+static struct lcore_info lcore_info[RTE_MAX_LCORE];
+
+/* Used for queueing bursts of TX packets. */
+struct mbuf_table {
+ unsigned len;
+ unsigned txq_id;
+ struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+/* TX queue for each data core. */
+struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
+
+/* Per-device statistics struct */
+struct device_statistics {
+ uint64_t tx_total;
+ rte_atomic64_t rx_total_atomic;
+ uint64_t rx_total;
+ uint64_t tx;
+ rte_atomic64_t rx_atomic;
+ uint64_t rx;
+} __rte_cache_aligned;
+
+struct device_statistics dev_statistics[MAX_DEVICES];
+
+/*
+ * Set character device basename.
+ */
+static int
+tep_parse_basename(const char *q_arg)
+{
+ /* parse number string */
+
+ if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
+ return -1;
+ else
+ snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
+
+ return 0;
+}
+
+/*
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ errno = 0;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+/*
+ * Parse num options at run time.
+ */
+static int
+parse_num_opt(const char *q_arg, uint32_t max_valid_value)
+{
+ char *end = NULL;
+ unsigned long num;
+
+ errno = 0;
+
+ /* parse unsigned int string */
+ num = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (num > max_valid_value)
+ return -1;
+
+ return num;
+
+}
+
+/*
+ * Display usage
+ */
+static void
+vep_termination_usage(const char *prgname)
+{
+ RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+ " --nb-devices: number of virtIO device\n"
+ " --dev-basename <name>\n"
+ " -p PORTMASK: Set mask for ports to be used by application\n"
+ " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
+ " --dev-basename: The basename to be used for the character device.\n",
+ prgname);
+}
+
+/*
+ * Parse the arguments given in the command line of the application.
+ */
+static int
+tep_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ int option_index;
+ unsigned i;
+ const char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"nb-devices", required_argument, NULL, 0},
+ {"stats", required_argument, NULL, 0},
+ {"dev-basename", required_argument, NULL, 0},
+ {NULL, 0, 0, 0},
+ };
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:P",
+ long_option, &option_index)) != EOF) {
+ switch (opt) {
+ /* Portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
+ vep_termination_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case 0:
+ if (!strncmp(long_option[option_index].name, "nb-devices", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_DEVICES);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for nb-devices [0-%d]\n", MAX_DEVICES);
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ num_devices = ret;
+ }
+
+ /* Enable/disable stats. */
+ if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ enable_stats = ret;
+ }
+
+ /* Set character device basename. */
+ if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
+ if (tep_parse_basename(optarg) == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device "
+ "basename (Max %d characters)\n", MAX_BASENAME_SZ);
+ vep_termination_usage(prgname);
+ return -1;
+ }
+ }
+
+ break;
+
+ /* Invalid option - print options. */
+ default:
+ vep_termination_usage(prgname);
+ return -1;
+ }
+ }
+
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (enabled_port_mask & (1 << i))
+ ports[num_ports++] = (uint8_t)i;
+ }
+
+ if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Update the global var NUM_PORTS and array PORTS according to system ports number
+ * and return valid ports number
+ */
+static unsigned check_ports_num(unsigned nb_ports)
+{
+ unsigned valid_num_ports = num_ports;
+ unsigned portid;
+
+ if (num_ports > nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
+ num_ports, nb_ports);
+ num_ports = nb_ports;
+ }
+
+ for (portid = 0; portid < num_ports; portid ++) {
+ if (ports[portid] >= nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
+ ports[portid], (nb_ports - 1));
+ ports[portid] = INVALID_PORT_ID;
+ valid_num_ports--;
+ }
+ }
+ return valid_num_ports;
+}
+
+/*
+ * This function routes the TX packet to the correct interface. This may be a local device
+ * or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, __attribute__((unused)) uint16_t vlan_tag)
+{
+ struct mbuf_table *tx_q;
+ struct rte_mbuf **m_table;
+ unsigned len, ret = 0;
+
+ const uint16_t lcore_id = rte_lcore_id();
+ struct virtio_net *dev = vdev->dev;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
+
+ /*Add packet to the port tx queue*/
+ tx_q = &lcore_tx_queue[lcore_id];
+ len = tx_q->len;
+ tx_q->m_table[len] = m;
+ len++;
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ /* Free any buffers not handled by TX and update the port stats. */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ }
+
+ tx_q->len = len;
+ return;
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered with the
+ * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
+ * with all devices in the main linked list.
+ */
+static int
+switch_worker(__attribute__((unused)) void *arg)
+{
+ struct rte_mempool *mbuf_pool = arg;
+ struct virtio_net *dev = NULL;
+ struct vhost_dev *vdev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *mbuf_tmp = NULL;
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret = 0, i;
+ const uint16_t lcore_id = rte_lcore_id();
+ const uint16_t num_cores = (uint16_t)rte_lcore_count();
+ uint16_t rx_count = 0;
+ uint16_t tx_count;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ tx_q = &lcore_tx_queue[lcore_id];
+ for (i = 0; i < num_cores; i ++) {
+ if (lcore_ids[i] == lcore_id) {
+ tx_q->txq_id = i;
+ break;
+ }
+ }
+
+ while(1) {
+ cur_tsc = rte_rdtsc();
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+
+ tx_q->len = 0;
+ }
+
+ prev_tsc = cur_tsc;
+
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+ /*
+ * Inform the configuration core that we have exited the linked list and that no devices are
+ * in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /*
+ * Process devices
+ */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while (dev_ll != NULL) {
+ /*get virtio device ID*/
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
+
+ if (unlikely(vdev->remove)) {
+ dev_ll = dev_ll->next;
+ vdev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+
+ if (likely(vdev->ready == DEVICE_RX)) {
+ /*Handle guest RX*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ vdev->rx_q, pkts_burst, MAX_PKT_BURST);
+
+ if (rx_count) {
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
+ rx_count);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_atomic, ret_count);
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ rte_pktmbuf_free(pkts_burst[rx_count]);
+ }
+
+ }
+ }
+
+ if (likely(!vdev->remove)) {
+ /* Handle guest TX*/
+ tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
+ /* If this is the first received packet we need to learn the MAC */
+ if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
+ if (vdev->remove) {
+ while (tx_count) {
+ mbuf_tmp = pkts_burst[--tx_count];
+ if (mbuf_tmp)
+ rte_pktmbuf_free(mbuf_tmp);
+ }
+ }
+ }
+ while (tx_count) {
+ mbuf_tmp = pkts_burst[--tx_count];
+ if (mbuf_tmp)
+ virtio_tx_route(vdev, mbuf_tmp, (uint16_t)dev->device_fh);
+ }
+ }
+
+ /*move to the next device in the list*/
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Add an entry to a used linked list. A free entry must first be found
+ * in the free linked list using get_data_ll_free_entry();
+ */
+static void
+add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ /* Set next as NULL and use a compiler barrier to avoid reordering. */
+ ll_dev->next = NULL;
+ rte_compiler_barrier();
+
+ /* If ll == NULL then this is the first device. */
+ if (ll) {
+ /* Increment to the tail of the linked list. */
+ while ((ll->next != NULL) )
+ ll = ll->next;
+
+ ll->next = ll_dev;
+ } else {
+ *ll_root_addr = ll_dev;
+ }
+}
+
+/*
+ * Remove an entry from a used linked list. The entry must then be added to
+ * the free linked list using put_data_ll_free_entry().
+ */
+static void
+rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev,
+ struct virtio_net_data_ll *ll_dev_last)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ if (unlikely((ll == NULL) || (ll_dev == NULL)))
+ return;
+
+ if (ll_dev == ll)
+ *ll_root_addr = ll_dev->next;
+ else
+ if (likely(ll_dev_last != NULL))
+ ll_dev_last->next = ll_dev->next;
+ else
+ RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
+}
+
+/*
+ * Find and return an entry from the free linked list.
+ */
+static struct virtio_net_data_ll *
+get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+ struct virtio_net_data_ll *ll_dev;
+
+ if (ll_free == NULL)
+ return NULL;
+
+ ll_dev = ll_free;
+ *ll_root_addr = ll_free->next;
+
+ return ll_dev;
+}
+
+/*
+ * Place an entry back on to the free linked list.
+ */
+static void
+put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+
+ if (ll_dev == NULL)
+ return;
+
+ ll_dev->next = ll_free;
+ *ll_root_addr = ll_dev;
+}
+
+/*
+ * Creates a linked list of a given size.
+ */
+static struct virtio_net_data_ll *
+alloc_data_ll(uint32_t size)
+{
+ struct virtio_net_data_ll *ll_new;
+ uint32_t i;
+
+ /* Malloc and then chain the linked list. */
+ ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
+ if (ll_new == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
+ return NULL;
+ }
+
+ for (i = 0; i < size - 1; i++) {
+ ll_new[i].vdev = NULL;
+ ll_new[i].next = &ll_new[i+1];
+ }
+ ll_new[i].next = NULL;
+
+ return (ll_new);
+}
+
+/*
+ * Create the main linked list along with each individual cores linked list. A used and a free list
+ * are created to manage entries.
+ */
+static int
+init_data_ll (void)
+{
+ int lcore;
+
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
+ if (lcore_info[lcore].lcore_ll == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
+ return -1;
+ }
+
+ lcore_info[lcore].lcore_ll->device_num = 0;
+ lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+ lcore_info[lcore].lcore_ll->ll_root_used = NULL;
+ if (num_devices % num_switching_cores)
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
+ else
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
+ }
+
+ /* Allocate devices up to a maximum of MAX_DEVICES. */
+ ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
+
+ return 0;
+}
+
+/*
+ * Remove a device from the specific data core linked list and from the main linked list. Synchonization
+ * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
+ * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
+ */
+static void
+destroy_device (volatile struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_lcore_dev_cur;
+ struct virtio_net_data_ll *ll_main_dev_cur;
+ struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
+ struct virtio_net_data_ll *ll_main_dev_last = NULL;
+ struct vhost_dev *vdev;
+ int lcore;
+
+ dev->flags &= ~VIRTIO_DEV_RUNNING;
+
+ vdev = (struct vhost_dev *)dev->priv;
+ /*set the remove flag. */
+ vdev->remove = 1;
+ while(vdev->ready != DEVICE_SAFE_REMOVE) {
+ rte_pause();
+ }
+
+ /* Search for entry to be removed from lcore ll */
+ ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used;
+ while (ll_lcore_dev_cur != NULL) {
+ if (ll_lcore_dev_cur->vdev == vdev) {
+ break;
+ } else {
+ ll_lcore_dev_last = ll_lcore_dev_cur;
+ ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+ }
+ }
+
+ if (ll_lcore_dev_cur == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find the dev to be destroy.\n",
+ dev->device_fh);
+ return;
+ }
+
+ /* Search for entry to be removed from main ll */
+ ll_main_dev_cur = ll_root_used;
+ ll_main_dev_last = NULL;
+ while (ll_main_dev_cur != NULL) {
+ if (ll_main_dev_cur->vdev == vdev) {
+ break;
+ } else {
+ ll_main_dev_last = ll_main_dev_cur;
+ ll_main_dev_cur = ll_main_dev_cur->next;
+ }
+ }
+
+ /* Remove entries from the lcore and main ll. */
+ rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+ rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+
+ /* Set the dev_removal_flag on each lcore. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
+ }
+
+ /*
+ * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
+ * they can no longer access the device removed from the linked lists and that the devices
+ * are no longer in use.
+ */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
+ rte_pause();
+ }
+ }
+
+ /* Add the entries back to the lcore and main free ll.*/
+ put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+ put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+
+ /* Decrement number of device on the lcore. */
+ lcore_info[vdev->coreid].lcore_ll->device_num--;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
+
+ rte_free(vdev);
+
+}
+
+/*
+ * A new device is added to a data core. First the device is added to the main linked list
+ * and the allocated to a specific data core.
+ */
+static int
+new_device (struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_dev;
+ int lcore, core_add = 0;
+ uint32_t device_num_min = num_devices;
+ struct vhost_dev *vdev;
+
+ vdev = rte_zmalloc("vhost device", sizeof(*vdev), RTE_CACHE_LINE_SIZE);
+ if (vdev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Couldn't allocate memory for vhost dev\n",
+ dev->device_fh);
+ return -1;
+ }
+ vdev->dev = dev;
+ dev->priv = vdev;
+
+ /* Add device to main ll */
+ ll_dev = get_data_ll_free_entry(&ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
+ "of %d devices per core has been reached\n",
+ dev->device_fh, num_devices);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ ll_dev->vdev = vdev;
+ add_data_ll_entry(&ll_root_used, ll_dev);
+ vdev->rx_q = dev->device_fh;
+
+ /*reset ready flag*/
+ vdev->ready = DEVICE_MAC_LEARNING;
+ vdev->remove = 0;
+
+ /* Find a suitable lcore to add the device. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+ device_num_min = lcore_info[lcore].lcore_ll->device_num;
+ core_add = lcore;
+ }
+ }
+ /* Add device to lcore ll */
+ ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
+ vdev->ready = DEVICE_SAFE_REMOVE;
+ destroy_device(dev);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ ll_dev->vdev = vdev;
+ vdev->coreid = core_add;
+
+ add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_dev);
+
+ /* Initialize device stats */
+ memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
+
+ /* Disable notifications. */
+ rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0);
+ rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0);
+ lcore_info[vdev->coreid].lcore_ll->device_num++;
+ dev->flags |= VIRTIO_DEV_RUNNING;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, vdev->coreid);
+
+ return 0;
+}
+
+/*
+ * These callback allow devices to be added to the data core when configuration
+ * has been fully complete.
+ */
+static const struct virtio_net_device_ops virtio_net_device_ops =
+{
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+};
+
+/*
+ * This is a thread will wake up after a period to print stats if the user has
+ * enabled them.
+ */
+static void
+print_stats(void)
+{
+ struct virtio_net_data_ll *dev_ll;
+ uint64_t tx_dropped, rx_dropped;
+ uint64_t tx, tx_total, rx, rx_total;
+ uint32_t device_fh;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
+
+ while(1) {
+ sleep(enable_stats);
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nDevice statistics ====================================");
+
+ dev_ll = ll_root_used;
+ while (dev_ll != NULL) {
+ device_fh = (uint32_t)dev_ll->vdev->dev->device_fh;
+ tx_total = dev_statistics[device_fh].tx_total;
+ tx = dev_statistics[device_fh].tx;
+ tx_dropped = tx_total - tx;
+ rx_total = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_total_atomic);
+ rx = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_atomic);
+ rx_dropped = rx_total - rx;
+
+ printf("\nStatistics for device %"PRIu32" ------------------------------"
+ "\nTX total: %"PRIu64""
+ "\nTX dropped: %"PRIu64""
+ "\nTX successful: %"PRIu64""
+ "\nRX total: %"PRIu64""
+ "\nRX dropped: %"PRIu64""
+ "\nRX successful: %"PRIu64"",
+ device_fh,
+ tx_total,
+ tx_dropped,
+ tx,
+ rx_total,
+ rx_dropped,
+ rx);
+
+ dev_ll = dev_ll->next;
+ }
+ printf("\n======================================================\n");
+ }
+}
+
+/*
+ * Main function, does initialisation and calls the per-lcore functions. The CUSE
+ * device is also registered here to handle the IOCTLs.
+ */
+int
+main(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool = NULL;
+ unsigned lcore_id, core_id = 0;
+ unsigned nb_ports, valid_num_ports;
+ int ret;
+ uint8_t portid;
+ uint16_t queue_id;
+ static pthread_t tid;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse app arguments */
+ ret = tep_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
+ if (rte_lcore_is_enabled(lcore_id))
+ lcore_ids[core_id ++] = lcore_id;
+
+ if (rte_lcore_count() > RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE,"Not enough cores\n");
+
+ /*set the number of swithcing cores available*/
+ num_switching_cores = rte_lcore_count()-1;
+
+ /* Get the number of physical ports. */
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+
+ /*
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
+ valid_num_ports = check_ports_num(nb_ports);
+
+ if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+
+ /* Create the mbuf pool. */
+ mbuf_pool = rte_mempool_create(
+ "MBUF_POOL",
+ NUM_MBUFS_PER_PORT
+ * valid_num_ports,
+ MBUF_SIZE, MBUF_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
+ vpool_array[queue_id].pool = mbuf_pool;
+
+ /* Set log level. */
+ rte_set_log_level(LOG_LEVEL);
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Skipping disabled port %d\n", portid);
+ continue;
+ }
+ }
+
+ /* Initialise all linked lists. */
+ if (init_data_ll() == -1)
+ rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
+
+ /* Initialize device stats */
+ memset(&dev_statistics, 0, sizeof(dev_statistics));
+
+ /* Enable stats if the user option is set. */
+ if (enable_stats)
+ pthread_create(&tid, NULL, (void*)print_stats, NULL );
+
+ /* Launch all data cores. */
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(switch_worker,
+ mbuf_pool, lcore_id);
+ }
+
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
+
+ /* Register CUSE device to handle IOCTLs. */
+ ret = rte_vhost_driver_register((char *)&dev_basename);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
+
+ rte_vhost_driver_callback_register(&virtio_net_device_ops);
+
+ /* Start CUSE session. */
+ rte_vhost_driver_session_start();
+ return 0;
+}
diff --git a/examples/tep_termination/main.h b/examples/tep_termination/main.h
new file mode 100644
index 0000000..8fb4d5d
--- /dev/null
+++ b/examples/tep_termination/main.h
@@ -0,0 +1,113 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do { \
+ RTE_LOG(DEBUG, log_type, fmt, ##args); \
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
+#endif
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
+#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING 0
+#define DEVICE_RX 1
+#define DEVICE_SAFE_REMOVE 2
+
+#define MAX_QUEUES 512
+
+/* Max burst size for RX/TX */
+#define MAX_PKT_BURST 32
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/* *
+ * Device linked list structure for data path.
+ */
+struct vhost_dev {
+ /**< Pointer to device created by vhost lib. */
+ struct virtio_net *dev;
+ /**< Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /**< Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /**< Device MAC address (Obtained on first TX packet). */
+ struct ether_addr mac_address;
+ /**< RX queue number. */
+ uint16_t rx_q;
+ /**< Data core that the device is added to. */
+ uint16_t coreid;
+ /**< A device is set as ready if the MAC address has been set. */
+ volatile uint8_t ready;
+ /**< Device is marked for removal from the data core. */
+ volatile uint8_t remove;
+} __rte_cache_aligned;
+
+/* *
+ * Structure containing data core specific information.
+ */
+struct lcore_ll_info
+{
+ struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
+ struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
+ uint32_t device_num; /* Number of devices on lcore. */
+ volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
+};
+
+struct lcore_info
+{
+ struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
+};
+
+struct virtio_net_data_ll
+{
+ struct vhost_dev *vdev; /* Pointer to device created by configuration core. */
+ struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
+};
+
+uint32_t
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count);
+
+#endif /* _MAIN_H_ */
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 02/10] examples/tep_termination:define VXLAN device information and APIs
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 01/10] examples/tep_termination:initialize the VXLAN example Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
Some basic VXLAN definations and APIs are added in this file, which include VXLAN device structure and the APIs for encapsulation and decapsulation.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
---
examples/tep_termination/main.c | 1 +
examples/tep_termination/vxlan.h | 81 ++++++++++++++++++++++++++++++++++++++
2 files changed, 82 insertions(+), 0 deletions(-)
create mode 100644 examples/tep_termination/vxlan.h
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 2e36ad0..e58726f 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -52,6 +52,7 @@
#include <rte_virtio_net.h>
#include "main.h"
+#include "vxlan.h"
/* the maximum number of external ports supported */
#define MAX_SUP_PORTS 1
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
new file mode 100644
index 0000000..96c68fb
--- /dev/null
+++ b/examples/tep_termination/vxlan.h
@@ -0,0 +1,81 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VXLAN_H_
+#define _VXLAN_H_
+
+#define PORT_MIN 49152
+#define PORT_MAX 65535
+#define PORT_RANGE (PORT_MAX - PORT_MIN) + 1
+
+#define VXLAN_N_PORTS 2
+#define VXLAN_FLAGS 0x00000008
+#define OUTER_VLAN_ID 100
+
+struct vxlan_port
+{
+ uint32_t portid; /* VirtIO port id */
+ uint32_t peerip; /* remote VTEP IP address */
+ struct ether_addr peermac; /* remote VTEP MAC address */
+ struct ether_addr portmac; /* VM MAC address */
+};
+
+struct vxlan_conf
+{
+ uint16_t vxport; /* VXLAN UDP destination port */
+ uint32_t portip; /* DPDK port IP address*/
+ uint32_t in_key; /* VLAN ID */
+ uint32_t out_key; /* VXLAN VNI */
+ uint32_t portid; /* DPDK port id */
+ struct vxlan_port port[VXLAN_N_PORTS]; /* VXLAN configuration */
+} __rte_cache_aligned;
+
+/* structure that caches offload info for the current packet */
+struct offload_info
+{
+ uint16_t ethertype;
+ uint8_t l2_len;
+ uint16_t l3_len;
+ uint8_t l4_len;
+ uint8_t l4_proto;
+ uint16_t outer_ethertype;
+ uint8_t outer_l2_len;
+ uint16_t outer_l3_len;
+ uint8_t outer_l4_len;
+ uint8_t outer_l4_proto;
+}__rte_cache_aligned;
+
+int decapsulation(struct rte_mbuf *pkt);
+int encapsulation(struct rte_mbuf *m, uint8_t portid);
+
+#endif /* _MAIN_H_ */
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 01/10] examples/tep_termination:initialize the VXLAN example Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 02/10] examples/tep_termination:define VXLAN device information and APIs Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 04/10] examples/tep_termination:implement " Jijiang Liu
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
We are trying to create a framework for tunneling packet processing, so some common APIs are added here, which include
1> tunnel port configuration
2> tunnel setup
3> tunnel destroying
4> tunneling packet processing for Rx side
5> tunneling packet processing for Tx side
6> tunnel parameter processing
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
---
examples/tep_termination/vxlan_setup.h | 76 ++++++++++++++++++++++++++++++++
1 files changed, 76 insertions(+), 0 deletions(-)
create mode 100644 examples/tep_termination/vxlan_setup.h
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
new file mode 100644
index 0000000..b79a987
--- /dev/null
+++ b/examples/tep_termination/vxlan_setup.h
@@ -0,0 +1,76 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VXLAN_SETUP_H_
+#define VXLAN_SETUP_H_
+
+typedef int (*ol_port_configure_t)(uint8_t port, struct rte_mempool *mbuf_pool);
+
+typedef int (*ol_tunnel_setup_t)(struct vhost_dev *vdev, struct rte_mbuf *m);
+
+typedef void (*ol_tunnel_destroy_t)(struct vhost_dev *vdev);
+
+typedef int (*ol_tx_handle_t)(uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+typedef int (*ol_rx_handle_t)(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count);
+
+typedef int (*ol_param_handle)(struct virtio_net *dev);
+
+struct ol_switch_ops {
+ ol_port_configure_t port_configure;
+ ol_tunnel_setup_t tunnel_setup;
+ ol_tunnel_destroy_t tunnel_destroy;
+ ol_tx_handle_t tx_handle;
+ ol_rx_handle_t rx_handle;
+ ol_param_handle param_handle;
+};
+
+int
+vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool);
+
+int
+vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m);
+
+void
+vxlan_unlink(struct vhost_dev *vdev);
+
+int
+vxlan_tx_pkts (uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+int
+vxlan_rx_pkts (struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count);
+
+#endif /* VXLAN_SETUP_H_ */
+
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 04/10] examples/tep_termination:implement VXLAN packet processing
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (2 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 05/10] examples/tep_termination:implement the APIs of encapsulation and decapsulation for VXLAN Jijiang Liu
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
Implement the following functions:
1> VXLAN port configuration
2> VXLAN tunnel setup
3> VXLAN tunnel destroying
4> VXLAN packet processing for Rx side
5> VXLAN packet processing for Tx side
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
---
examples/tep_termination/Makefile | 2 +-
examples/tep_termination/main.c | 26 ++-
examples/tep_termination/vxlan_setup.c | 391 ++++++++++++++++++++++++++++++++
3 files changed, 415 insertions(+), 4 deletions(-)
create mode 100644 examples/tep_termination/vxlan_setup.c
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index 23fb647..ed4fab2 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -48,7 +48,7 @@ else
APP = tep_termination
# all source are stored in SRCS-y
-SRCS-y := main.c
+SRCS-y := main.c vxlan_setup.c
CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
CFLAGS += $(WERROR_FLAGS)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index f846053..60a825e 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -113,6 +113,16 @@ struct vpool {
/* number of devices */
uint16_t num_devices;
+/* overlay packet operation */
+struct ol_switch_ops overlay_options = {
+ .port_configure = vxlan_port_init,
+ .tunnel_setup = vxlan_link,
+ .tunnel_destroy = vxlan_unlink,
+ .tx_handle = vxlan_tx_pkts,
+ .rx_handle = vxlan_rx_pkts,
+ .param_handle = NULL,
+};
+
/* Enable stats. */
static uint32_t enable_stats = 0;
@@ -350,7 +360,7 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, __attribute__((unuse
{
struct mbuf_table *tx_q;
struct rte_mbuf **m_table;
- unsigned len, ret = 0;
+ unsigned len, ret;
const uint16_t lcore_id = rte_lcore_id();
struct virtio_net *dev = vdev->dev;
@@ -369,6 +379,8 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, __attribute__((unuse
if (unlikely(len == MAX_PKT_BURST)) {
m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = overlay_options.tx_handle(ports[0], (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)tx_q->m_table, (uint16_t)tx_q->len);
/* Free any buffers not handled by TX and update the port stats. */
if (unlikely(ret < len)) {
do {
@@ -401,7 +413,7 @@ switch_worker(__attribute__((unused)) void *arg)
volatile struct lcore_ll_info *lcore_ll;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret = 0, i;
+ unsigned ret, i;
const uint16_t lcore_id = rte_lcore_id();
const uint16_t num_cores = (uint16_t)rte_lcore_count();
uint16_t rx_count = 0;
@@ -429,6 +441,9 @@ switch_worker(__attribute__((unused)) void *arg)
if (tx_q->len) {
LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
+ ret = overlay_options.tx_handle(ports[0], (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)tx_q->m_table,
+ (uint16_t)tx_q->len);
if (unlikely(ret < tx_q->len)) {
do {
rte_pktmbuf_free(tx_q->m_table[ret]);
@@ -462,6 +477,7 @@ switch_worker(__attribute__((unused)) void *arg)
if (unlikely(vdev->remove)) {
dev_ll = dev_ll->next;
+ overlay_options.tunnel_destroy(vdev);
vdev->ready = DEVICE_SAFE_REMOVE;
continue;
}
@@ -472,6 +488,7 @@ switch_worker(__attribute__((unused)) void *arg)
vdev->rx_q, pkts_burst, MAX_PKT_BURST);
if (rx_count) {
+ ret_count = overlay_options.rx_handle(dev, pkts_burst, rx_count);
if (enable_stats) {
rte_atomic64_add(
&dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
@@ -492,7 +509,7 @@ switch_worker(__attribute__((unused)) void *arg)
tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
/* If this is the first received packet we need to learn the MAC */
if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
- if (vdev->remove) {
+ if (vdev->remove || (overlay_options.tunnel_setup(vdev, pkts_burst[0]) == -1)) {
while (tx_count) {
mbuf_tmp = pkts_burst[--tx_count];
if (mbuf_tmp)
@@ -966,6 +983,9 @@ main(int argc, char *argv[])
"Skipping disabled port %d\n", portid);
continue;
}
+
+ if (overlay_options.port_configure(portid, mbuf_pool) != 0)
+ rte_exit(EXIT_FAILURE, "Cannot initialize network ports\n");
}
/* Initialise all linked lists. */
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
new file mode 100644
index 0000000..874c502
--- /dev/null
+++ b/examples/tep_termination/vxlan_setup.c
@@ -0,0 +1,391 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_ip.h>
+#include <rte_udp.h>
+#include <rte_tcp.h>
+
+#include "main.h"
+#include "rte_virtio_net.h"
+#include "vxlan.h"
+#include "vxlan_setup.h"
+
+#define VXLAN_ENCAP_HDR_SIZE (sizeof(struct ether_hdr) + IPV4_HEADER_LEN + \
+ UDP_HEADER_LEN + VXLAN_HEADER_LEN)
+
+#define IPV4_HEADER_LEN 20
+#define UDP_HEADER_LEN 8
+#define VXLAN_HEADER_LEN 8
+
+#define IP_VERSION 0x40
+#define IP_HDRLEN 0x05 /* default IP header length == five 32-bits words. */
+#define IP_DEFTTL 64 /* from RFC 1340. */
+#define IP_VHL_DEF (IP_VERSION | IP_HDRLEN)
+
+#define IP_DN_FRAGMENT_FLAG 0x0040
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+extern uint16_t num_devices;
+extern uint8_t ports[RTE_MAX_ETHPORTS];
+
+/* ethernet addresses of ports */
+extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* heads for the main used and free linked lists for the data path. */
+static struct virtio_net_data_ll *ll_root_used = NULL;
+
+/* VXLAN device */
+struct vxlan_conf vxdev;
+
+struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
+struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+
+/* local VTEP IP address */
+static uint8_t vxlan_multicast_ips[2][4] = {{239, 1, 1, 1}, {239, 1, 2, 1}};
+
+/* remote VTEP IP address */
+static uint8_t vxlan_overlay_ips[2][4] = {{192, 168, 10, 1}, {192, 168, 30, 1}};
+
+/* remote VTEP MAC address */
+static uint8_t peer_mac[6] = {0x00, 0x11, 0x01, 0x00, 0x00, 0x01};
+
+/* VXLAN termination filter type */
+uint8_t tep_filter_type[] = {RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID,
+ RTE_TUNNEL_FILTER_IMAC_TENID,
+ RTE_TUNNEL_FILTER_OMAC_TENID_IMAC,};
+
+/* Options for configuring ethernet port */
+static const struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+};
+
+const uint16_t tenant_id_conf[] = {
+ 1000, 1000, 1001, 1001, 1002, 1002, 1003, 1003,
+ 1004, 1004, 1005, 1005, 1006, 1006, 1007, 1007,
+ 1008, 1008, 1009, 1009, 1010, 1010, 1011, 1011,
+ 1012, 1012, 1013, 1013, 1014, 1014, 1015, 1015,
+ 1016, 1016, 1017, 1017, 1018, 1018, 1019, 1019,
+ 1020, 1020, 1021, 1021, 1022, 1022, 1023, 1023,
+ 1024, 1024, 1025, 1025, 1026, 1026, 1027, 1027,
+ 1028, 1028, 1029, 1029, 1030, 1030, 1031, 1031,
+};
+
+/* *
+ * Compares a packet destination MAC address to a device MAC address.
+ */
+static inline int __attribute__((always_inline))
+ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
+{
+ return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
+}
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+int
+vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ struct rte_eth_dev_info dev_info;
+ uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
+ const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
+ const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+ int retval;
+ uint16_t num_queues, q;
+ //struct vxlan_conf *pconf = &vxdev;
+ struct rte_eth_rxconf *rxconf;
+ struct rte_eth_txconf *txconf;
+
+ rte_eth_dev_info_get (port, &dev_info);
+
+ dev_info.max_rx_queues = num_devices;
+
+ if (dev_info.max_rx_queues > MAX_QUEUES) {
+ rte_exit(EXIT_FAILURE,
+ "please define MAX_QUEUES no less than %u in %s\n",
+ dev_info.max_rx_queues, __FILE__);
+ }
+
+ rxconf = &dev_info.default_rxconf;
+ txconf = &dev_info.default_txconf;
+
+ txconf->txq_flags = 0;
+ num_queues = num_devices;
+
+ if (port >= rte_eth_dev_count()) return -1;
+
+ rx_rings = (uint16_t)num_queues;
+
+ /* Configure ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+ /* Setup the queues. */
+ for (q = 0; q < rx_rings; q ++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+ rte_eth_dev_socket_id(port), rxconf,
+ mbuf_pool);
+ if (retval < 0)
+ return retval;
+ }
+ for (q = 0; q < tx_rings; q ++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+ rte_eth_dev_socket_id(port), txconf);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the device. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0)
+ return retval;
+
+ rte_eth_macaddr_get(port, &ports_eth_addr[port]);
+ RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ ports_eth_addr[port].addr_bytes[0],
+ ports_eth_addr[port].addr_bytes[1],
+ ports_eth_addr[port].addr_bytes[2],
+ ports_eth_addr[port].addr_bytes[3],
+ ports_eth_addr[port].addr_bytes[4],
+ ports_eth_addr[port].addr_bytes[5]);
+
+ return 0;
+}
+
+static int
+vxlan_rx_process(struct rte_mbuf *pkt)
+{
+ int ret = 0;
+ if ((pkt->ol_flags & (PKT_RX_TUNNEL_IPV4_HDR
+ | PKT_RX_TUNNEL_IPV6_HDR)) == 0)
+ return -1;
+
+ return ret;
+}
+
+static int
+vxlan_tx_process(struct rte_mbuf *pkt)
+{
+ int ret = 0;
+
+ if ((pkt->pkt_len + VXLAN_ENCAP_HDR_SIZE) > ETHER_MAX_LEN ){
+ rte_pktmbuf_free(pkt);
+ return -1;
+ }
+
+ return ret;
+}
+
+/*
+ * This function learns the MAC address of the device
+ */
+int
+vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
+{
+ int i;
+ struct ether_hdr *pkt_hdr;
+ struct virtio_net_data_ll *dev_ll;
+ struct virtio_net *dev = vdev->dev;
+ uint64_t portid = dev->device_fh;
+
+ dev_ll = ll_root_used;
+
+ if (unlikely(portid > VXLAN_N_PORTS)){
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: Not configuring device,"
+ "as already have %d ports for VXLAN.", dev->device_fh, VXLAN_N_PORTS);
+ return -1;
+ }
+
+ /* Learn MAC address of guest device from packet */
+ pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ while (dev_ll != NULL) {
+ if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->vdev->mac_address)) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing"
+ " MAC address and has not been registered.\n", dev->device_fh);
+ return -1;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ vxdev.port[portid].portmac.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
+ vxdev.port[portid].peermac.addr_bytes[i] = peer_mac[i];
+ }
+
+ /* Print out inner MAC and VNI info. */
+ RTE_LOG(INFO, VHOST_DATA, "(%d) MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VNI %d registered\n",
+ vdev->rx_q,
+ vdev->mac_address.addr_bytes[0], vdev->mac_address.addr_bytes[1],
+ vdev->mac_address.addr_bytes[2], vdev->mac_address.addr_bytes[3],
+ vdev->mac_address.addr_bytes[4], vdev->mac_address.addr_bytes[5],
+ tenant_id_conf[vdev->rx_q]);
+
+ vxdev.port[portid].portid = portid;
+
+ for (i = 0; i < 4; i++) {
+ /*Local VTEP IP */
+ vxdev.portip |= vxlan_multicast_ips[portid][i] << (8 * i);
+ /* remote VTEP IP */
+ vxdev.port[portid].peerip |= vxlan_overlay_ips[portid][i] << (8 * i);
+ }
+
+ vxdev.out_key = tenant_id_conf[vdev->rx_q];
+ ether_addr_copy(&vxdev.port[portid].peermac, &app_l2_hdr[portid].d_addr);
+ ether_addr_copy(&ports_eth_addr[0], &app_l2_hdr[portid].s_addr);
+ app_l2_hdr[portid].ether_type = rte_cpu_to_be_32(ETHER_TYPE_IPv4);
+
+ struct ipv4_hdr *ip;
+ ip = &app_ip_hdr[portid];
+ ip->version_ihl = IP_VHL_DEF;
+ ip->type_of_service = 0;
+ ip->total_length = 0;
+ ip->packet_id = 0;
+ ip->fragment_offset = IP_DN_FRAGMENT_FLAG;
+ ip->time_to_live = IP_DEFTTL;
+ ip->next_proto_id = IPPROTO_UDP;
+ ip->hdr_checksum = 0;
+ ip->src_addr = vxdev.portip;
+ ip->dst_addr = vxdev.port[portid].peerip;
+ /* Set device as ready for RX. */
+
+ vdev->ready = DEVICE_RX;
+
+ return 0;
+}
+
+/*
+ * Removes cloud filter. Ensures that nothing is adding buffers to the RX
+ * queue before disabling RX on the device.
+ */
+void
+vxlan_unlink(struct vhost_dev *vdev)
+{
+ int ret = 1;
+ unsigned i = 0, rx_count;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+
+ if (vdev->ready == DEVICE_RX) {
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ vdev->mac_address.addr_bytes[i] = 0;
+
+ /*Clear out the receive buffers*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)vdev->rx_q, pkts_burst, MAX_PKT_BURST);
+
+ while (rx_count) {
+ if (ret < 0)
+ continue;
+
+ for (i = 0; i < rx_count; i++)
+ rte_pktmbuf_free(pkts_burst[i]);
+
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)vdev->rx_q, pkts_burst, MAX_PKT_BURST);
+ }
+ vdev->ready = DEVICE_MAC_LEARNING;
+ }
+}
+
+/*transmit packets after encapsulating*/
+int
+vxlan_tx_pkts (uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts) {
+ int ret = 0;
+ uint16_t count = nb_pkts, i;
+
+ for (i = 0; i < count; i++){
+ ret = vxlan_tx_process(tx_pkts[i]);
+ }
+
+ ret = rte_eth_tx_burst(port_id, queue_id, tx_pkts, nb_pkts);
+
+ return ret;
+
+}
+
+/*Check for decapsulation and pass packets directly to VIRTIO device*/
+int
+vxlan_rx_pkts (struct virtio_net *dev, struct rte_mbuf **pkts_burst, uint32_t rx_count)
+{
+
+ uint32_t i = 0, count = 0;
+ int ret;
+ struct rte_mbuf *pkts_valid[rx_count];
+ for(i = 0; i < rx_count; i++) {
+ ret = vxlan_rx_process(pkts_burst[i]);
+ if(unlikely(ret < 0)){
+ continue;
+ }
+ pkts_valid[count] = pkts_burst[i];
+ count++;
+ }
+
+ ret = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_valid, rx_count);
+ return ret;
+}
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 05/10] examples/tep_termination:implement the APIs of encapsulation and decapsulation for VXLAN
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (3 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 04/10] examples/tep_termination:implement " Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 06/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
Fill the APIs of encapsulation and decapsulation for VXLAN packet; for the encapsulation operation, IPv6 is not supported now.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
---
examples/tep_termination/Makefile | 4 +-
examples/tep_termination/vxlan.c | 160 ++++++++++++++++++++++++++++++++
examples/tep_termination/vxlan_setup.c | 7 +-
3 files changed, 167 insertions(+), 4 deletions(-)
create mode 100644 examples/tep_termination/vxlan.c
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index ed4fab2..03ba865 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -48,7 +48,7 @@ else
APP = tep_termination
# all source are stored in SRCS-y
-SRCS-y := main.c vxlan_setup.c
+SRCS-y := main.c vxlan_setup.c vxlan.c
CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
CFLAGS += $(WERROR_FLAGS)
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
new file mode 100644
index 0000000..9d86616
--- /dev/null
+++ b/examples/tep_termination/vxlan.c
@@ -0,0 +1,160 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stdint.h>
+#include <rte_mbuf.h>
+#include <rte_ether.h>
+#include <rte_hash_crc.h>
+#include <rte_byteorder.h>
+#include <rte_udp.h>
+#include <rte_tcp.h>
+#include <rte_sctp.h>
+#include <rte_ip.h>
+
+#include "main.h"
+#include "vxlan.h"
+
+extern struct vxlan_conf vxdev;
+extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
+extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+
+/*
+ * Parse an ethernet header to fill the ethertype, l2_len, l3_len and
+ * ipproto. This function is able to recognize IPv4/IPv6 with one optional vlan
+ * header.
+ */
+static void
+parse_ethernet(struct ether_hdr *eth_hdr, struct offload_info *info)
+{
+ struct ipv4_hdr *ipv4_hdr;
+ struct ipv6_hdr *ipv6_hdr;
+
+ info->outer_l2_len = sizeof(struct ether_hdr);
+ info->ethertype = eth_hdr->ether_type;
+
+ if (info->ethertype == rte_cpu_to_be_16(ETHER_TYPE_VLAN)) {
+ struct vlan_hdr *vlan_hdr = (struct vlan_hdr *)(eth_hdr + 1);
+ info->outer_l2_len += sizeof(struct vlan_hdr);
+ info->ethertype = vlan_hdr->eth_proto;
+ }
+
+ switch (rte_cpu_to_be_16(info->ethertype)) {
+ case ETHER_TYPE_IPv4:
+ ipv4_hdr = (struct ipv4_hdr *) ((char *)eth_hdr + info->l2_len);
+ info->outer_l3_len = sizeof(struct ipv4_hdr);
+ info->l4_proto = ipv4_hdr->next_proto_id;
+ break;
+ case ETHER_TYPE_IPv6:
+ ipv6_hdr = (struct ipv6_hdr *) ((char *)eth_hdr + info->l2_len);
+ info->outer_l3_len = sizeof(struct ipv6_hdr);
+ info->l4_proto = ipv6_hdr->proto;
+ break;
+ default:
+ info->outer_l2_len = 0;
+ info->outer_l3_len = 0;
+ info->l4_proto = 0;
+ break;
+ }
+
+}
+
+int decapsulation(struct rte_mbuf *pkt)
+{
+ struct offload_info info;
+ uint16_t outer_header_len;
+
+ memset(&info, 0, sizeof(struct offload_info));
+
+ struct ether_hdr *phdr = rte_pktmbuf_mtod(pkt, struct ether_hdr *);
+ parse_ethernet(phdr, &info);
+ if (info.l4_proto == IPPROTO_UDP) {
+ struct udp_hdr *udp_hdr;
+ udp_hdr = (struct udp_hdr *)((char *)phdr +
+ info.outer_l2_len + info.outer_l3_len);
+ if (udp_hdr->dst_port != rte_cpu_to_be_16(4789))
+ return -1;
+ }
+ outer_header_len = info.outer_l2_len + info.outer_l3_len
+ + sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr);
+
+ rte_pktmbuf_adj(pkt, outer_header_len);
+ return 0;
+}
+
+int encapsulation(struct rte_mbuf *m, uint8_t vport_id)
+{
+ struct offload_info info;
+ uint64_t ol_flags = 0;
+ uint32_t old_len = m->pkt_len, hash;
+ struct ether_hdr *phdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /*Allocate space for new ethernet, IPv4, UDP and VXLAN headers*/
+ struct ether_hdr *pneth = (struct ether_hdr *) rte_pktmbuf_prepend(m,
+ sizeof(struct ether_hdr) + sizeof(struct ipv4_hdr)
+ + sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr));
+
+ struct ipv4_hdr *ip = (struct ipv4_hdr *) &pneth[1];
+ struct udp_hdr *udp = (struct udp_hdr *) &ip[1];
+ struct vxlan_hdr *vxlan = (struct vxlan_hdr *) &udp[1];
+
+ memset(&info, 0, sizeof(struct offload_info));
+ /* replace original Ethernet header with ours */
+ pneth = rte_memcpy(pneth, &app_l2_hdr[vport_id], sizeof(struct ether_hdr));
+ /* copy in IP header */
+ ip = rte_memcpy(ip, &app_ip_hdr[vport_id], sizeof(struct ipv4_hdr));
+ ip->total_length = rte_cpu_to_be_16(m->data_len - sizeof(struct ether_hdr));
+
+ /* outer IP checksum */
+ ol_flags |= PKT_TX_OUTER_IP_CKSUM;
+ ip->hdr_checksum = 0;
+
+ m->outer_l2_len = sizeof(struct ether_hdr);
+ m->outer_l3_len = sizeof(struct ipv4_hdr);
+
+ m->ol_flags |= ol_flags;
+
+ /*VXLAN HEADER*/
+ vxlan->vx_flags = VXLAN_FLAGS;
+ vxlan->vx_vni = rte_cpu_to_be_32(vxdev.out_key << 8);
+
+ /*UDP HEADER*/
+ udp->dgram_cksum = 0;
+ udp->dgram_len = rte_cpu_to_be_16(old_len
+ + sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr));
+
+ udp->dst_port = rte_cpu_to_be_16(vxdev.vxport);
+ hash = rte_hash_crc(phdr, 2 * ETHER_ADDR_LEN, phdr->ether_type);
+ udp->src_port = rte_cpu_to_be_16((((uint64_t) hash * PORT_RANGE) >> 32)+ PORT_MIN);
+
+ return 0;
+}
+
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 874c502..7cb2660 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -226,11 +226,12 @@ vxlan_rx_process(struct rte_mbuf *pkt)
| PKT_RX_TUNNEL_IPV6_HDR)) == 0)
return -1;
+ ret = decapsulation(pkt);
return ret;
}
static int
-vxlan_tx_process(struct rte_mbuf *pkt)
+vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
{
int ret = 0;
@@ -239,6 +240,7 @@ vxlan_tx_process(struct rte_mbuf *pkt)
return -1;
}
+ ret = encapsulation(pkt, vport_id);
return ret;
}
@@ -358,9 +360,10 @@ vxlan_tx_pkts (uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts) {
int ret = 0;
uint16_t count = nb_pkts, i;
+ uint16_t vport_id = queue_id;
for (i = 0; i < count; i++){
- ret = vxlan_tx_process(tx_pkts[i]);
+ ret = vxlan_tx_process(vport_id, tx_pkts[i]);
}
ret = rte_eth_tx_burst(port_id, queue_id, tx_pkts, nb_pkts);
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 06/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (4 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 05/10] examples/tep_termination:implement the APIs of encapsulation and decapsulation for VXLAN Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 07/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
The port number of UDP tunneling packet is configurable, which has 16 entries in total for i40e.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 14 ++++++++++++++
examples/tep_termination/vxlan.c | 3 ++-
examples/tep_termination/vxlan_setup.c | 17 +++++++++++++----
3 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 60a825e..68d1706 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -113,6 +113,9 @@ struct vpool {
/* number of devices */
uint16_t num_devices;
+/* VXLAN UDP destination port */
+uint16_t udp_port;
+
/* overlay packet operation */
struct ol_switch_ops overlay_options = {
.port_configure = vxlan_port_init,
@@ -231,6 +234,7 @@ static void
vep_termination_usage(const char *prgname)
{
RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+ " --udp-port: UDP destination port for VXLAN packet\n"
" --nb-devices: number of virtIO device\n"
" --dev-basename <name>\n"
" -p PORTMASK: Set mask for ports to be used by application\n"
@@ -250,6 +254,7 @@ tep_parse_args(int argc, char **argv)
unsigned i;
const char *prgname = argv[0];
static struct option long_option[] = {
+ {"udp-port", required_argument, NULL, 0},
{"nb-devices", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
@@ -280,6 +285,15 @@ tep_parse_args(int argc, char **argv)
} else
num_devices = ret;
}
+
+ if (!strncmp(long_option[option_index].name, "udp-port", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT16_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for UDP port [0-N]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ }
+ }
/* Enable/disable stats. */
if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 9d86616..942eb10 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -46,6 +46,7 @@
extern struct vxlan_conf vxdev;
extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+extern uint16_t udp_port;
/*
* Parse an ethernet header to fill the ethertype, l2_len, l3_len and
@@ -100,7 +101,7 @@ int decapsulation(struct rte_mbuf *pkt)
struct udp_hdr *udp_hdr;
udp_hdr = (struct udp_hdr *)((char *)phdr +
info.outer_l2_len + info.outer_l3_len);
- if (udp_hdr->dst_port != rte_cpu_to_be_16(4789))
+ if (udp_hdr->dst_port != rte_cpu_to_be_16(udp_port))
return -1;
}
outer_header_len = info.outer_l2_len + info.outer_l3_len
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 7cb2660..fbffbc8 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -80,6 +80,7 @@
#define RTE_TEST_TX_DESC_DEFAULT 512
extern uint16_t num_devices;
+extern uint16_t udp_port;
extern uint8_t ports[RTE_MAX_ETHPORTS];
/* ethernet addresses of ports */
@@ -156,10 +157,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
int retval;
uint16_t num_queues, q;
- //struct vxlan_conf *pconf = &vxdev;
+ struct vxlan_conf *pconf = &vxdev;
+ struct rte_eth_udp_tunnel tunnel_udp;
struct rte_eth_rxconf *rxconf;
struct rte_eth_txconf *txconf;
+ pconf->vxport = udp_port;
rte_eth_dev_info_get (port, &dev_info);
dev_info.max_rx_queues = num_devices;
@@ -204,6 +207,13 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
if (retval < 0)
return retval;
+ /* Configure UDP port for VXLAN */
+ tunnel_udp.udp_port = udp_port;
+ tunnel_udp.prot_type = RTE_TUNNEL_TYPE_VXLAN;
+ retval = rte_eth_dev_udp_tunnel_add(port, &tunnel_udp);
+ if (retval < 0)
+ return retval;
+
rte_eth_macaddr_get(port, &ports_eth_addr[port]);
RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
@@ -230,8 +240,7 @@ vxlan_rx_process(struct rte_mbuf *pkt)
return ret;
}
-static int
-vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
+static int vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
{
int ret = 0;
@@ -241,6 +250,7 @@ vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
}
ret = encapsulation(pkt, vport_id);
+
return ret;
}
@@ -367,7 +377,6 @@ vxlan_tx_pkts (uint8_t port_id, uint16_t queue_id,
}
ret = rte_eth_tx_burst(port_id, queue_id, tx_pkts, nb_pkts);
-
return ret;
}
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 07/10] examples/tep_termination:add tunnel filter type configuration
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (5 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 06/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 08/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
The follwoing filter types are supported for VXLAN,
1> Inner MAC&VLAN and tenent ID
2> Inner MAC and tenent ID, and Outer MAC
3> Inner MAC and tenent ID
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 21 +++++++++++++
examples/tep_termination/vxlan_setup.c | 50 ++++++++++++++++++++++++++++++-
2 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 68d1706..e8142e0 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -72,6 +72,9 @@
#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+/* Defines how long we wait between retries on RX */
+#define BURST_RX_WAIT_US 15
+
#define BURST_RX_RETRIES 4/* Number of retries on RX. */
#define JUMBO_FRAME_MAX_SIZE 0x2600
@@ -116,6 +119,9 @@ uint16_t num_devices;
/* VXLAN UDP destination port */
uint16_t udp_port;
+/* RX filter type for tunneling packet */
+uint8_t filter_idx;
+
/* overlay packet operation */
struct ol_switch_ops overlay_options = {
.port_configure = vxlan_port_init,
@@ -236,6 +242,10 @@ vep_termination_usage(const char *prgname)
RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
" --udp-port: UDP destination port for VXLAN packet\n"
" --nb-devices: number of virtIO device\n"
+ " --filter-type[1-3]: filter type for tunneling packet\n"
+ " 1: Inner MAC&VLAN and tenent ID\n"
+ " 2: Inner MAC and tenent ID\n"
+ " 3: Outer MAC, Inner MAC and tenent ID\n"
" --dev-basename <name>\n"
" -p PORTMASK: Set mask for ports to be used by application\n"
" --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
@@ -256,6 +266,7 @@ tep_parse_args(int argc, char **argv)
static struct option long_option[] = {
{"udp-port", required_argument, NULL, 0},
{"nb-devices", required_argument, NULL, 0},
+ {"filter-type", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
{NULL, 0, 0, 0},
@@ -294,6 +305,16 @@ tep_parse_args(int argc, char **argv)
return -1;
}
}
+
+ if (!strncmp(long_option[option_index].name, "filter-type", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 3);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for filter type [1-3]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ filter_idx = ret - 1;
+ }
/* Enable/disable stats. */
if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index fbffbc8..312a878 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -82,6 +82,7 @@
extern uint16_t num_devices;
extern uint16_t udp_port;
extern uint8_t ports[RTE_MAX_ETHPORTS];
+extern uint8_t filter_idx;
/* ethernet addresses of ports */
extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -237,10 +238,12 @@ vxlan_rx_process(struct rte_mbuf *pkt)
return -1;
ret = decapsulation(pkt);
+
return ret;
}
-static int vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
+static int
+vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
{
int ret = 0;
@@ -260,11 +263,12 @@ static int vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
int
vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
{
- int i;
+ int i, ret;
struct ether_hdr *pkt_hdr;
struct virtio_net_data_ll *dev_ll;
struct virtio_net *dev = vdev->dev;
uint64_t portid = dev->device_fh;
+ struct rte_eth_tunnel_filter_conf tunnel_filter_conf;
dev_ll = ll_root_used;
@@ -290,6 +294,28 @@ vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
vxdev.port[portid].peermac.addr_bytes[i] = peer_mac[i];
}
+ memset(&tunnel_filter_conf, 0, sizeof(struct rte_eth_tunnel_filter_conf));
+
+ tunnel_filter_conf.outer_mac = &ports_eth_addr[0];
+ tunnel_filter_conf.filter_type = tep_filter_type[filter_idx];
+
+ /* inner MAC */
+ tunnel_filter_conf.inner_mac = &vdev->mac_address;
+
+ tunnel_filter_conf.queue_id = vdev->rx_q;
+ tunnel_filter_conf.tenant_id = tenant_id_conf[vdev->rx_q];
+ tunnel_filter_conf.tunnel_type = RTE_TUNNEL_TYPE_VXLAN;
+
+ ret = rte_eth_dev_filter_ctrl(ports[0],
+ RTE_ETH_FILTER_TUNNEL,
+ RTE_ETH_FILTER_ADD,
+ &tunnel_filter_conf);
+ if (ret) {
+ RTE_LOG(ERR, VHOST_DATA, "%d Failed to add device MAC address to cloud filter\n",
+ vdev->rx_q);
+ return -1;
+ }
+
/* Print out inner MAC and VNI info. */
RTE_LOG(INFO, VHOST_DATA, "(%d) MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VNI %d registered\n",
vdev->rx_q,
@@ -341,8 +367,28 @@ vxlan_unlink(struct vhost_dev *vdev)
int ret = 1;
unsigned i = 0, rx_count;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_eth_tunnel_filter_conf tunnel_filter_conf;
if (vdev->ready == DEVICE_RX) {
+ memset(&tunnel_filter_conf, 0, sizeof(struct rte_eth_tunnel_filter_conf));
+
+ tunnel_filter_conf.outer_mac = &ports_eth_addr[0];
+ tunnel_filter_conf.inner_mac = &vdev->mac_address;
+ tunnel_filter_conf.tenant_id = tenant_id_conf[vdev->rx_q];
+ tunnel_filter_conf.filter_type = tep_filter_type[filter_idx];
+
+ tunnel_filter_conf.queue_id = vdev->rx_q;
+ tunnel_filter_conf.tunnel_type = RTE_TUNNEL_TYPE_VXLAN;
+
+ ret = rte_eth_dev_filter_ctrl(ports[0],
+ RTE_ETH_FILTER_TUNNEL,
+ RTE_ETH_FILTER_DELETE,
+ &tunnel_filter_conf);
+ if (ret) {
+ RTE_LOG(ERR, VHOST_DATA, "%d Failed to add device MAC address to cloud filter\n",
+ vdev->rx_q);
+ return;
+ }
for (i = 0; i < ETHER_ADDR_LEN; i++)
vdev->mac_address.addr_bytes[i] = 0;
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 08/10] examples/tep_termination:add Tx checksum offload configuration for inner header
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (6 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 07/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 09/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
For VXLAN packet, the inner Tx checksum offload means inner IPv4 and inner L4(TCP/UDP/SCTP).
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 15 +++++++
examples/tep_termination/vxlan.c | 77 ++++++++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index e8142e0..7c69a82 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -119,6 +119,9 @@ uint16_t num_devices;
/* VXLAN UDP destination port */
uint16_t udp_port;
+/* enable/disable inner TX checksum */
+uint8_t tx_checksum;
+
/* RX filter type for tunneling packet */
uint8_t filter_idx;
@@ -242,6 +245,7 @@ vep_termination_usage(const char *prgname)
RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
" --udp-port: UDP destination port for VXLAN packet\n"
" --nb-devices: number of virtIO device\n"
+ " --tx-checksum [0|1]: inner Tx checksum offload\n"
" --filter-type[1-3]: filter type for tunneling packet\n"
" 1: Inner MAC&VLAN and tenent ID\n"
" 2: Inner MAC and tenent ID\n"
@@ -266,6 +270,7 @@ tep_parse_args(int argc, char **argv)
static struct option long_option[] = {
{"udp-port", required_argument, NULL, 0},
{"nb-devices", required_argument, NULL, 0},
+ {"tx-checksum", required_argument, NULL, 0},
{"filter-type", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
@@ -305,6 +310,16 @@ tep_parse_args(int argc, char **argv)
return -1;
}
}
+
+ if (!strncmp(long_option[option_index].name, "tx-checksum", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tx-checksum [0|1]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ tx_checksum = ret;
+ }
if (!strncmp(long_option[option_index].name, "filter-type", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, 3);
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 942eb10..6fc75ee 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -43,11 +43,21 @@
#include "main.h"
#include "vxlan.h"
+extern uint8_t tx_checksum;
extern struct vxlan_conf vxdev;
extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
extern uint16_t udp_port;
+static uint16_t
+get_psd_sum(void *l3_hdr, uint16_t ethertype, uint64_t ol_flags)
+{
+ if (ethertype == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
+ return rte_ipv4_phdr_cksum(l3_hdr, ol_flags);
+ else /* assume ethertype == ETHER_TYPE_IPv6 */
+ return rte_ipv6_phdr_cksum(l3_hdr, ol_flags);
+}
+
/*
* Parse an ethernet header to fill the ethertype, l2_len, l3_len and
* ipproto. This function is able to recognize IPv4/IPv6 with one optional vlan
@@ -87,6 +97,67 @@ parse_ethernet(struct ether_hdr *eth_hdr, struct offload_info *info)
}
}
+/* if possible, calculate the checksum of a packet in hw or sw,
+ * * depending on the testpmd command line configuration */
+static uint64_t
+process_inner_cksums(struct ether_hdr *eth_hdr, struct offload_info *info)
+{
+ void *l3_hdr = NULL;
+ struct ipv4_hdr *ipv4_hdr;
+ struct ipv6_hdr *ipv6_hdr;
+ struct udp_hdr *udp_hdr;
+ struct tcp_hdr *tcp_hdr;
+ struct sctp_hdr *sctp_hdr;
+ uint64_t ol_flags = 0;
+
+ info->l2_len = sizeof(struct ether_hdr);
+ info->ethertype = eth_hdr->ether_type;
+
+ if (info->ethertype == rte_cpu_to_be_16(ETHER_TYPE_VLAN)) {
+ struct vlan_hdr *vlan_hdr = (struct vlan_hdr *)(eth_hdr + 1);
+ info->l2_len += sizeof(struct vlan_hdr);
+ info->ethertype = vlan_hdr->eth_proto;
+ }
+
+ l3_hdr = (char *)eth_hdr + info->l2_len;
+
+ if (info->ethertype == rte_cpu_to_be_16(ETHER_TYPE_IPv4)) {
+ ipv4_hdr = l3_hdr;
+ ipv4_hdr->hdr_checksum = 0;
+ ol_flags |= PKT_TX_IPV4;
+ ol_flags |= PKT_TX_IP_CKSUM;
+ info->l3_len = sizeof(struct ipv4_hdr);
+ info->l4_proto = ipv4_hdr->next_proto_id;
+ } else if (info->ethertype == rte_cpu_to_be_16(ETHER_TYPE_IPv6)) {
+ ipv6_hdr = l3_hdr;
+ info->l3_len = sizeof(struct ipv6_hdr);
+ info->l4_proto = ipv6_hdr->proto;
+ ol_flags |= PKT_TX_IPV6;
+ } else
+ return 0; /* packet type not supported, nothing to do */
+
+ if (info->l4_proto == IPPROTO_UDP) {
+ udp_hdr = (struct udp_hdr *)((char *)l3_hdr + info->l3_len);
+ /* do not recalculate udp cksum if it was 0 */
+ udp_hdr->dgram_cksum = 0;
+ ol_flags |= PKT_TX_UDP_CKSUM;
+ udp_hdr->dgram_cksum = get_psd_sum(l3_hdr,
+ info->ethertype, ol_flags);
+ } else if (info->l4_proto == IPPROTO_TCP) {
+ tcp_hdr = (struct tcp_hdr *)((char *)l3_hdr + info->l3_len);
+ tcp_hdr->cksum = 0;
+ ol_flags |= PKT_TX_TCP_CKSUM;
+ tcp_hdr->cksum = get_psd_sum(l3_hdr, info->ethertype,
+ ol_flags);
+
+ } else if (info->l4_proto == IPPROTO_SCTP) {
+ sctp_hdr = (struct sctp_hdr *)((char *)l3_hdr + info->l3_len);
+ sctp_hdr->cksum = 0;
+ ol_flags |= PKT_TX_SCTP_CKSUM;
+ }
+
+ return ol_flags;
+}
int decapsulation(struct rte_mbuf *pkt)
{
@@ -137,6 +208,12 @@ int encapsulation(struct rte_mbuf *m, uint8_t vport_id)
/* outer IP checksum */
ol_flags |= PKT_TX_OUTER_IP_CKSUM;
ip->hdr_checksum = 0;
+ if (tx_checksum) {
+ ol_flags |= process_inner_cksums(phdr, &info);
+ m->l2_len = info.l2_len;
+ m->l3_len = info.l3_len;
+ m->l2_len += ETHER_VXLAN_HLEN;
+ }
m->outer_l2_len = sizeof(struct ether_hdr);
m->outer_l3_len = sizeof(struct ipv4_hdr);
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 09/10] examples/tep_termination:add TSO offload configuration
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (7 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 08/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
If the 'tso-segsz' is not 0, which means TSO offload is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 19 +++++++++++++++++--
examples/tep_termination/vxlan.c | 4 ++++
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 7c69a82..8ce78ee 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -122,6 +122,9 @@ uint16_t udp_port;
/* enable/disable inner TX checksum */
uint8_t tx_checksum;
+/* TSO segment size */
+uint16_t tso_segsz = 0;
+
/* RX filter type for tunneling packet */
uint8_t filter_idx;
@@ -246,6 +249,7 @@ vep_termination_usage(const char *prgname)
" --udp-port: UDP destination port for VXLAN packet\n"
" --nb-devices: number of virtIO device\n"
" --tx-checksum [0|1]: inner Tx checksum offload\n"
+ " --tso-segsz [0-N]: TSO segment size\n"
" --filter-type[1-3]: filter type for tunneling packet\n"
" 1: Inner MAC&VLAN and tenent ID\n"
" 2: Inner MAC and tenent ID\n"
@@ -271,6 +275,7 @@ tep_parse_args(int argc, char **argv)
{"udp-port", required_argument, NULL, 0},
{"nb-devices", required_argument, NULL, 0},
{"tx-checksum", required_argument, NULL, 0},
+ {"tso-segsz", required_argument, NULL, 0},
{"filter-type", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
@@ -301,6 +306,16 @@ tep_parse_args(int argc, char **argv)
} else
num_devices = ret;
}
+
+ if (!strncmp(long_option[option_index].name, "tso-segsz", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT16_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for TCP segment size [0-N]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ tso_segsz = ret;
+ }
if (!strncmp(long_option[option_index].name, "udp-port", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, INT16_MAX);
@@ -310,8 +325,8 @@ tep_parse_args(int argc, char **argv)
return -1;
}
}
-
- if (!strncmp(long_option[option_index].name, "tx-checksum", MAX_LONG_OPT_SZ)) {
+
+ if (!strncmp(long_option[option_index].name, "tx-checksum", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, 1);
if (ret == -1) {
RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tx-checksum [0|1]\n");
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 6fc75ee..e3ef832 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -48,6 +48,7 @@ extern struct vxlan_conf vxdev;
extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
extern uint16_t udp_port;
+extern uint16_t tso_segsz;
static uint16_t
get_psd_sum(void *l3_hdr, uint16_t ethertype, uint64_t ol_flags)
@@ -149,6 +150,8 @@ process_inner_cksums(struct ether_hdr *eth_hdr, struct offload_info *info)
ol_flags |= PKT_TX_TCP_CKSUM;
tcp_hdr->cksum = get_psd_sum(l3_hdr, info->ethertype,
ol_flags);
+ if (tso_segsz != 0)
+ ol_flags |= PKT_TX_TCP_SEG;
} else if (info->l4_proto == IPPROTO_SCTP) {
sctp_hdr = (struct sctp_hdr *)((char *)l3_hdr + info->l3_len);
@@ -219,6 +222,7 @@ int encapsulation(struct rte_mbuf *m, uint8_t vport_id)
m->outer_l3_len = sizeof(struct ipv4_hdr);
m->ol_flags |= ol_flags;
+ m->tso_segsz = tso_segsz;
/*VXLAN HEADER*/
vxlan->vx_flags = VXLAN_FLAGS;
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [dpdk-dev] [PATCH RFC 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (8 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 09/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
@ 2015-04-16 3:55 ` Jijiang Liu
2015-04-20 7:22 ` [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Liu, Jijiang
2015-04-28 3:31 ` Liu, Jijiang
11 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-04-16 3:55 UTC (permalink / raw)
To: dev, walter.e.gilmore, thomas.long
The two flags by default are enabled, but sometimes we want to know the performance influence due to encapsulation and decapsulation operations, and
I think we should add the two options.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 36 ++++++++++++++++++++++++++++++-
examples/tep_termination/vxlan_setup.c | 8 +++++-
2 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 8ce78ee..7d021f9 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -125,6 +125,12 @@ uint8_t tx_checksum;
/* TSO segment size */
uint16_t tso_segsz = 0;
+/* enable/disable decapsulation */
+uint8_t rx_decap = 1;
+
+/* enable/disable encapsulation */
+uint8_t tx_encap = 1;
+
/* RX filter type for tunneling packet */
uint8_t filter_idx;
@@ -250,6 +256,8 @@ vep_termination_usage(const char *prgname)
" --nb-devices: number of virtIO device\n"
" --tx-checksum [0|1]: inner Tx checksum offload\n"
" --tso-segsz [0-N]: TSO segment size\n"
+ " --decap [0|1]: Decapsulation for tunneling packet\n"
+ " --encap [0|1]: Encapsulation for tunneling packet\n"
" --filter-type[1-3]: filter type for tunneling packet\n"
" 1: Inner MAC&VLAN and tenent ID\n"
" 2: Inner MAC and tenent ID\n"
@@ -276,6 +284,8 @@ tep_parse_args(int argc, char **argv)
{"nb-devices", required_argument, NULL, 0},
{"tx-checksum", required_argument, NULL, 0},
{"tso-segsz", required_argument, NULL, 0},
+ {"decap", required_argument, NULL, 0},
+ {"encap", required_argument, NULL, 0},
{"filter-type", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
@@ -325,8 +335,30 @@ tep_parse_args(int argc, char **argv)
return -1;
}
}
-
- if (!strncmp(long_option[option_index].name, "tx-checksum", MAX_LONG_OPT_SZ)) {
+
+ /* Enable/disable encapsulation on RX. */
+ if (!strncmp(long_option[option_index].name, "decap", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for decapsulation [0|1]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ rx_decap = ret;
+ }
+
+ /* Enable/disable encapsulation on TX. */
+ if (!strncmp(long_option[option_index].name, "encap", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for encapsulation [0|1]\n");
+ vep_termination_usage(prgname);
+ return -1;
+ } else
+ tx_encap = ret;
+ }
+
+ if (!strncmp(long_option[option_index].name, "tx-checksum", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, 1);
if (ret == -1) {
RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tx-checksum [0|1]\n");
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 312a878..b4e8fbc 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -83,6 +83,8 @@ extern uint16_t num_devices;
extern uint16_t udp_port;
extern uint8_t ports[RTE_MAX_ETHPORTS];
extern uint8_t filter_idx;
+extern uint8_t rx_decap;
+extern uint8_t tx_encap;
/* ethernet addresses of ports */
extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -237,7 +239,8 @@ vxlan_rx_process(struct rte_mbuf *pkt)
| PKT_RX_TUNNEL_IPV6_HDR)) == 0)
return -1;
- ret = decapsulation(pkt);
+ if(rx_decap)
+ ret = decapsulation(pkt);
return ret;
}
@@ -252,7 +255,8 @@ vxlan_tx_process(uint8_t vport_id, struct rte_mbuf *pkt)
return -1;
}
- ret = encapsulation(pkt, vport_id);
+ if (tx_encap)
+ ret = encapsulation(pkt, vport_id);
return ret;
}
--
1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (9 preceding siblings ...)
2015-04-16 3:55 ` [dpdk-dev] [PATCH RFC 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
@ 2015-04-20 7:22 ` Liu, Jijiang
2015-04-28 3:31 ` Liu, Jijiang
11 siblings, 0 replies; 13+ messages in thread
From: Liu, Jijiang @ 2015-04-20 7:22 UTC (permalink / raw)
To: Liu, Jijiang; +Cc: dev
Any comments on this RFC patch set ?
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jijiang Liu
> Sent: Thursday, April 16, 2015 11:56 AM
> To: dev@dpdk.org; Gilmore, Walter E; Long, Thomas
> Subject: [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample
>
> This VXLAN example simulates a VXLAN Tunnel endpoint(VTEP) termination in
> DPDK, which is used to demonstrate the offload and filtering capabilities of i40
> NIC for VXLAN packet.
>
> And this example uses the basic virtio devices management function from vHost
> example, and it uses us-Vhost interface and tunnel filtering mechanism to direct
> the traffic to/from a specific VM.
>
> In addition, this sample is also designed to show how tunneling protocols can be
> handled. For the vHost interface, we do not need to support zero copy/inter VM
> packet transfer etc. The approach that we take would be of benefit to you in
> that we put a pluggable structure in place so that the application could be easily
> extended to support a new tunneling protocol.
>
> The software framework is as follows:
>
> |-------------------| |-------------------|
> | VM-1(VNI:100) | | VM-2(VNI:200) |
> | |------| |------| | | |------| |------| |
> | |vport0| |vport1| | | |vport0| |vport1| |
> |-|------|-|------|-| |-|------|-|------|-| Guests
> \ /
> |-------------\-------/--------|
> | us-vHost interface |
> | |-|----|--| |
> | decap| | TEP| | encap | DPDK App
> | |-|----|--| |
> | | | |
> |------------|----|------------|
> | |
> |-------------|----|---------------|
> |tunnel filter| | IP/L4 Tx csum |
> |IP/L4 csum | | TSO |
> |packet type | | | NIC
> |CRC strip | | |
> |-------------|----|---------------|
> | |
> | |
> | |
> /-------\
> VXLAN Tunnel
>
> The sample will support the followings:
> 1> Tunneling packet recognition.
>
> 2> The port of UDP tunneling is configurable
>
> 3> Directing of incoming traffic to the correct queue based on the tunnel filter
> type such as inner MAC address and VNI.
> The VNI will be assigned from a static internal table based on the us-
> vhost device ID. Each device will receive a unique device ID. The inner MAC will
> be learned from the first packet transmitted from a device.
>
> 4> Decapsulation of Rx VXLAN traffic. This is a software only
> 4> operation(will use HW header split instead later)
>
> 5> Encapsulation of Tx VXLAN traffic. This is a software only operation
>
> 6> Tx outer IP, inner IP and L4 checksum offload
>
> 7> TSO support for tunneling packet
>
> Limitations:
> 1. No ARP support
> 2. There are some duplicated source codes because of using the basic virtio
> device management function from vhost sample, but consider that current vhost
> sample is quite complicated and huge enough, and I think we shall have a
> separate sample for tunneling packet processing.
> 3. Currently, only the i40e NIC is supported in the sample, but other types of
> NICs also can be supported later if those NICs are able to support tunneling
> packet filter.
>
>
> Jijiang Liu (10):
> create VXLAN sample framework using virtio device management function
> add basic VXLAN structures
> add VXLAN operation APIs
> support overlay operations
> Add encapsulation and decapsulation function
> add udp port configuration
> add filter type configuration
> add tx checksum offload configuration
> add TSO offload configuration
> add encapsulation and decapsulation flags
>
> examples/Makefile | 1 +
> examples/tep_termination/Makefile | 58 ++
> examples/tep_termination/main.c | 1117
> ++++++++++++++++++++++++++++++++
> examples/tep_termination/main.h | 113 ++++
> examples/tep_termination/vxlan.c | 242 +++++++
> examples/tep_termination/vxlan.h | 81 +++
> examples/tep_termination/vxlan_setup.c | 453 +++++++++++++
> examples/tep_termination/vxlan_setup.h | 76 +++
> 8 files changed, 2141 insertions(+), 0 deletions(-) create mode 100644
> examples/tep_termination/Makefile create mode 100644
> examples/tep_termination/main.c create mode 100644
> examples/tep_termination/main.h create mode 100644
> examples/tep_termination/vxlan.c create mode 100644
> examples/tep_termination/vxlan.h create mode 100644
> examples/tep_termination/vxlan_setup.c
> create mode 100644 examples/tep_termination/vxlan_setup.h
>
> --
> 1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample
2015-04-16 3:55 [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Jijiang Liu
` (10 preceding siblings ...)
2015-04-20 7:22 ` [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample Liu, Jijiang
@ 2015-04-28 3:31 ` Liu, Jijiang
11 siblings, 0 replies; 13+ messages in thread
From: Liu, Jijiang @ 2015-04-28 3:31 UTC (permalink / raw)
To: Liu, Jijiang; +Cc: dev
Hi All,
So far, I have not got any comments yet, which means all of you agree on the proposal of the VXLAN example?
Actually, if I can get your comments as soon as possible, which can avoid a lot of discussions in formal patch set and can accelerate the development.
Thanks
Jijiang Liu
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jijiang Liu
> Sent: Thursday, April 16, 2015 11:56 AM
> To: dev@dpdk.org; Gilmore, Walter E; Long, Thomas
> Subject: [dpdk-dev] [PATCH RFC 00/10] Add a VXLAN sample
>
> This VXLAN example simulates a VXLAN Tunnel endpoint(VTEP) termination in
> DPDK, which is used to demonstrate the offload and filtering capabilities of i40
> NIC for VXLAN packet.
>
> And this example uses the basic virtio devices management function from vHost
> example, and it uses us-Vhost interface and tunnel filtering mechanism to direct
> the traffic to/from a specific VM.
>
> In addition, this sample is also designed to show how tunneling protocols can be
> handled. For the vHost interface, we do not need to support zero copy/inter VM
> packet transfer etc. The approach that we take would be of benefit to you in
> that we put a pluggable structure in place so that the application could be easily
> extended to support a new tunneling protocol.
>
> The software framework is as follows:
>
> |-------------------| |-------------------|
> | VM-1(VNI:100) | | VM-2(VNI:200) |
> | |------| |------| | | |------| |------| |
> | |vport0| |vport1| | | |vport0| |vport1| |
> |-|------|-|------|-| |-|------|-|------|-| Guests
> \ /
> |-------------\-------/--------|
> | us-vHost interface |
> | |-|----|--| |
> | decap| | TEP| | encap | DPDK App
> | |-|----|--| |
> | | | |
> |------------|----|------------|
> | |
> |-------------|----|---------------|
> |tunnel filter| | IP/L4 Tx csum |
> |IP/L4 csum | | TSO |
> |packet type | | | NIC
> |CRC strip | | |
> |-------------|----|---------------|
> | |
> | |
> | |
> /-------\
> VXLAN Tunnel
>
> The sample will support the followings:
> 1> Tunneling packet recognition.
>
> 2> The port of UDP tunneling is configurable
>
> 3> Directing of incoming traffic to the correct queue based on the tunnel filter
> type such as inner MAC address and VNI.
> The VNI will be assigned from a static internal table based on the us-
> vhost device ID. Each device will receive a unique device ID. The inner MAC will
> be learned from the first packet transmitted from a device.
>
> 4> Decapsulation of Rx VXLAN traffic. This is a software only
> 4> operation(will use HW header split instead later)
>
> 5> Encapsulation of Tx VXLAN traffic. This is a software only operation
>
> 6> Tx outer IP, inner IP and L4 checksum offload
>
> 7> TSO support for tunneling packet
>
> Limitations:
> 1. No ARP support
> 2. There are some duplicated source codes because of using the basic virtio
> device management function from vhost sample, but consider that current vhost
> sample is quite complicated and huge enough, and I think we shall have a
> separate sample for tunneling packet processing.
> 3. Currently, only the i40e NIC is supported in the sample, but other types of
> NICs also can be supported later if those NICs are able to support tunneling
> packet filter.
>
>
> Jijiang Liu (10):
> create VXLAN sample framework using virtio device management function
> add basic VXLAN structures
> add VXLAN operation APIs
> support overlay operations
> Add encapsulation and decapsulation function
> add udp port configuration
> add filter type configuration
> add tx checksum offload configuration
> add TSO offload configuration
> add encapsulation and decapsulation flags
>
> examples/Makefile | 1 +
> examples/tep_termination/Makefile | 58 ++
> examples/tep_termination/main.c | 1117
> ++++++++++++++++++++++++++++++++
> examples/tep_termination/main.h | 113 ++++
> examples/tep_termination/vxlan.c | 242 +++++++
> examples/tep_termination/vxlan.h | 81 +++
> examples/tep_termination/vxlan_setup.c | 453 +++++++++++++
> examples/tep_termination/vxlan_setup.h | 76 +++
> 8 files changed, 2141 insertions(+), 0 deletions(-) create mode 100644
> examples/tep_termination/Makefile create mode 100644
> examples/tep_termination/main.c create mode 100644
> examples/tep_termination/main.h create mode 100644
> examples/tep_termination/vxlan.c create mode 100644
> examples/tep_termination/vxlan.h create mode 100644
> examples/tep_termination/vxlan_setup.c
> create mode 100644 examples/tep_termination/vxlan_setup.h
>
> --
> 1.7.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread