From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org, keith.wiles@intel.com
Subject: [dpdk-dev] [RFC PATCH 1/4] Add example pktdev implementation
Date: Fri, 17 Apr 2015 16:16:41 +0100 [thread overview]
Message-ID: <1429283804-28087-2-git-send-email-bruce.richardson@intel.com> (raw)
In-Reply-To: <1429283804-28087-1-git-send-email-bruce.richardson@intel.com>
This commit demonstrates what a minimal API for all packet handling
types would look like. It simply provides the necessary parts for
receiving and transmiting packets, and is based off the ethdev
implementation.
---
config/common_bsdapp | 5 ++
config/common_linuxapp | 5 ++
lib/Makefile | 1 +
lib/librte_pktdev/Makefile | 56 ++++++++++++++++
lib/librte_pktdev/rte_pktdev.c | 35 ++++++++++
lib/librte_pktdev/rte_pktdev.h | 144 +++++++++++++++++++++++++++++++++++++++++
6 files changed, 246 insertions(+)
create mode 100644 lib/librte_pktdev/Makefile
create mode 100644 lib/librte_pktdev/rte_pktdev.c
create mode 100644 lib/librte_pktdev/rte_pktdev.h
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 8ff4dc2..d2b932c 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -132,6 +132,11 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
CONFIG_RTE_LIBRTE_KVARGS=y
#
+# Compile generic packet handling device library
+#
+CONFIG_RTE_LIBRTE_PKTDEV=y
+
+#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 09a58ac..5bda416 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -129,6 +129,11 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
CONFIG_RTE_LIBRTE_KVARGS=y
#
+# Compile generic packet handling device library
+#
+CONFIG_RTE_LIBRTE_PKTDEV=y
+
+#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
diff --git a/lib/Makefile b/lib/Makefile
index d94355d..4db5ee0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -32,6 +32,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += librte_compat
+DIRS-$(CONFIG_RTE_LIBRTE_PKTDEV) += librte_pktdev
DIRS-$(CONFIG_RTE_LIBRTE_EAL) += librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_MALLOC) += librte_malloc
DIRS-$(CONFIG_RTE_LIBRTE_RING) += librte_ring
diff --git a/lib/librte_pktdev/Makefile b/lib/librte_pktdev/Makefile
new file mode 100644
index 0000000..2d3b3a1
--- /dev/null
+++ b/lib/librte_pktdev/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = libpktdev.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+EXPORT_MAP := rte_pktdev_version.map
+
+LIBABIVER := 1
+
+SRCS-y += rte_pktdev.c
+
+#
+# Export include files
+#
+SYMLINK-y-include += rte_pktdev.h
+
+# this lib depends upon no others:
+DEPDIRS-y +=
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_pktdev/rte_pktdev.c b/lib/librte_pktdev/rte_pktdev.c
new file mode 100644
index 0000000..4c32d86
--- /dev/null
+++ b/lib/librte_pktdev/rte_pktdev.c
@@ -0,0 +1,36 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "rte_pktdev.h"
+
+/* For future use */
diff --git a/lib/librte_pktdev/rte_pktdev.h b/lib/librte_pktdev/rte_pktdev.h
new file mode 100644
index 0000000..8a5699a
--- /dev/null
+++ b/lib/librte_pktdev/rte_pktdev.h
@@ -0,0 +1,144 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_PKTDEV_H_
+#define _RTE_PKTDEV_H_
+
+#include <stdint.h>
+
+/**
+ * @file
+ *
+ * RTE Packet Processing Device API
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* forward definition of mbuf structure. We don't need full mbuf header here */
+struct rte_mbuf;
+
+#define RTE_PKT_NAME_MAX_LEN (32)
+
+typedef uint16_t (*pkt_rx_burst_t)(void *rxq,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Retrieve packets from a queue of a device. */
+
+typedef uint16_t (*pkt_tx_burst_t)(void *txq,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Send packets on a queue of a device. */
+
+#define RTE_PKT_DEV_HDR(structname) struct { \
+ pkt_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */ \
+ pkt_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */ \
+ struct structname ## _data *data; /**< Pointer to device data */ \
+}
+
+#define RTE_PKT_DEV_DATA_HDR struct { \
+ char name[RTE_PKT_NAME_MAX_LEN]; /**< Unique identifier name */ \
+\
+ void **rx_queues; /**< Array of pointers to RX queues. */ \
+ void **tx_queues; /**< Array of pointers to TX queues. */ \
+ uint16_t nb_rx_queues; /**< Number of RX queues. */ \
+ uint16_t nb_tx_queues; /**< Number of TX queues. */ \
+}
+
+struct rte_pkt_dev {
+ RTE_PKT_DEV_HDR(rte_pkt_dev);
+};
+
+struct rte_pkt_dev_data {
+ RTE_PKT_DEV_DATA_HDR;
+};
+
+/**
+ *
+ * Retrieve a burst of input packets from a receive queue of a
+ * device. The retrieved packets are stored in *rte_mbuf* structures whose
+ * pointers are supplied in the *rx_pkts* array.
+ *
+ * @param dev
+ * The device to be polled for packets
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * @param rx_pkts
+ * The address of an array of pointers to *rte_mbuf* structures that
+ * must be large enough to store *nb_pkts* pointers in it.
+ * @param nb_pkts
+ * The maximum number of packets to retrieve.
+ * @return
+ * The number of packets actually retrieved, which is the number
+ * of pointers to *rte_mbuf* structures effectively supplied to the
+ * *rx_pkts* array.
+ */
+static inline uint16_t
+rte_pkt_rx_burst(struct rte_pkt_dev *dev, uint16_t queue_id,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
+{
+ return (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
+ rx_pkts, nb_pkts);
+}
+
+/**
+ * Send a burst of output packets on a transmit queue of a device.
+ *
+ * @param dev
+ * The device to be given the packets.
+ * @param queue_id
+ * The index of the queue through which output packets must be sent.
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to transmit.
+ * @return
+ * The number of output packets actually stored in transmit descriptors of
+ * the transmit ring. The return value can be less than the value of the
+ * *tx_pkts* parameter when the transmit ring is full or has been filled up.
+ */
+static inline uint16_t
+rte_pkt_tx_burst(struct rte_pkt_dev *dev, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PKTDEV_H_ */
--
2.1.0
next prev parent reply other threads:[~2015-04-17 15:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 19:44 [dpdk-dev] [RFC PATCH 0/4 v2] Extending DPDK with multiple device support Keith Wiles
2015-04-13 19:44 ` [dpdk-dev] [RFC PATCH 1/4 v2] Adding the common device files for " Keith Wiles
2015-05-04 13:13 ` Marc Sune
2015-05-04 14:44 ` Wiles, Keith
2015-04-13 19:44 ` [dpdk-dev] [RFC PATCH 2/4 v2] Add the ethdev changes " Keith Wiles
2015-04-13 19:44 ` [dpdk-dev] [RFC PATCH 3/4 v2] Add the test file changes for common " Keith Wiles
2015-04-13 19:44 ` [dpdk-dev] [RFC PATCH 4/4 v2] Update PMD files for new " Keith Wiles
2015-04-17 15:16 ` [dpdk-dev] [RFC PATCH 0/4] pktdev Bruce Richardson
2015-04-17 15:16 ` Bruce Richardson [this message]
2015-04-20 11:26 ` [dpdk-dev] [RFC PATCH 1/4] Add example pktdev implementation Ananyev, Konstantin
2015-04-20 15:02 ` Bruce Richardson
2015-04-21 8:40 ` Ananyev, Konstantin
2015-04-21 9:23 ` Bruce Richardson
2015-04-17 15:16 ` [dpdk-dev] [RFC PATCH 2/4] Make ethdev explicitly a subclass of pktdev Bruce Richardson
2015-04-17 15:16 ` [dpdk-dev] [RFC PATCH 3/4] add support for a ring to be a pktdev Bruce Richardson
2015-04-17 17:31 ` Neil Horman
2015-04-18 0:00 ` Ouyang, Changchun
2015-04-20 10:32 ` Ananyev, Konstantin
2015-04-17 15:16 ` [dpdk-dev] [RFC PATCH 4/4] example app showing pktdevs used in a chain Bruce Richardson
2015-04-17 17:28 ` [dpdk-dev] [RFC PATCH 0/4] pktdev Neil Horman
2015-04-17 18:49 ` Marc Sune
2015-04-17 19:50 ` Wiles, Keith
2015-04-20 6:51 ` Marc Sune
2015-04-20 10:43 ` Bruce Richardson
2015-04-20 17:03 ` Marc Sune
2015-04-20 13:19 ` Wiles, Keith
2015-04-20 13:30 ` Wiles, Keith
2015-05-04 13:13 ` [dpdk-dev] [RFC PATCH 0/4 v2] Extending DPDK with multiple device support Marc Sune
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429283804-28087-2-git-send-email-bruce.richardson@intel.com \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=keith.wiles@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).