From: Olivier Matz <olivier.matz@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 07/12] apps: use rte_pktmbuf_pool_create to create mbuf pools
Date: Mon, 20 Apr 2015 17:41:31 +0200 [thread overview]
Message-ID: <1429544496-22532-8-git-send-email-olivier.matz@6wind.com> (raw)
In-Reply-To: <1429544496-22532-1-git-send-email-olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
app/test-pipeline/init.c | 15 ++--------
app/test-pmd/testpmd.c | 9 ++----
app/test/test_distributor.c | 10 ++-----
app/test/test_distributor_perf.c | 10 ++-----
app/test/test_kni.c | 16 +++--------
app/test/test_link_bonding.c | 10 +++----
app/test/test_link_bonding_mode4.c | 12 +++-----
app/test/test_mbuf.c | 22 +++++----------
app/test/test_pmd_perf.c | 11 +++-----
app/test/test_pmd_ring.c | 10 ++-----
app/test/test_reorder.c | 10 ++-----
app/test/test_sched.c | 16 ++---------
app/test/test_table.c | 9 ++----
app/test/test_table.h | 3 +-
examples/bond/main.c | 10 ++-----
examples/distributor/main.c | 11 +++-----
examples/dpdk_qat/main.c | 10 ++-----
examples/exception_path/main.c | 14 ++++------
examples/ip_fragmentation/main.c | 18 ++++--------
examples/ip_pipeline/init.c | 32 ++++------------------
examples/ipv4_multicast/main.c | 23 ++++++----------
examples/kni/main.c | 12 +++-----
examples/l2fwd-ivshmem/host/host.c | 10 ++-----
examples/l2fwd-jobstats/main.c | 10 ++-----
examples/l2fwd/main.c | 11 ++------
examples/l3fwd-acl/main.c | 11 +++-----
examples/l3fwd-power/main.c | 11 +++-----
examples/l3fwd-vf/main.c | 12 +++-----
examples/l3fwd/main.c | 10 +++----
examples/link_status_interrupt/main.c | 10 ++-----
examples/load_balancer/init.c | 12 ++------
examples/load_balancer/main.h | 4 +--
.../client_server_mp/mp_server/init.c | 10 ++-----
examples/multi_process/symmetric_mp/main.c | 10 +++----
examples/netmap_compat/bridge/bridge.c | 12 +++-----
examples/packet_ordering/main.c | 11 +++-----
examples/qos_meter/main.c | 7 ++---
examples/qos_sched/init.c | 10 ++-----
examples/qos_sched/main.h | 2 +-
examples/quota_watermark/include/conf.h | 2 +-
examples/quota_watermark/qw/main.c | 7 ++---
examples/rxtx_callbacks/main.c | 11 +++-----
examples/skeleton/basicfwd.c | 13 ++-------
examples/vhost/main.c | 24 +++++-----------
examples/vhost_xen/main.c | 11 +++-----
examples/vmdq/main.c | 11 +++-----
examples/vmdq_dcb/main.c | 10 ++-----
lib/librte_pmd_bond/rte_eth_bond_alb.c | 16 +++++------
48 files changed, 175 insertions(+), 386 deletions(-)
diff --git a/app/test-pipeline/init.c b/app/test-pipeline/init.c
index 05f4503..db2196b 100644
--- a/app/test-pipeline/init.c
+++ b/app/test-pipeline/init.c
@@ -85,8 +85,7 @@ struct app_params app = {
.ring_tx_size = 128,
/* Buffer pool */
- .pool_buffer_size = 2048 + sizeof(struct rte_mbuf) +
- RTE_PKTMBUF_HEADROOM,
+ .pool_buffer_size = 2048 + RTE_PKTMBUF_HEADROOM,
.pool_size = 32 * 1024,
.pool_cache_size = 256,
@@ -144,16 +143,8 @@ app_init_mbuf_pools(void)
{
/* Init the buffer pool */
RTE_LOG(INFO, USER1, "Creating the mbuf pool ...\n");
- app.pool = rte_mempool_create(
- "mempool",
- app.pool_size,
- app.pool_buffer_size,
- app.pool_cache_size,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(),
- 0);
+ app.pool = rte_pktmbuf_pool_create("mempool", app.pool_size,
+ app.pool_cache_size, 0, app.pool_buffer_size, rte_socket_id());
if (app.pool == NULL)
rte_panic("Cannot create mbuf pool\n");
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1f2445e..8418db3 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -423,12 +423,9 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
rte_pktmbuf_init, NULL,
socket_id, 0);
else
- rte_mp = rte_mempool_create(pool_name, nb_mbuf, mb_size,
- (unsigned) mb_mempool_cache,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket_id, 0);
+ /* wrapper to rte_mempool_create() */
+ rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
+ mb_mempool_cache, 0, mbuf_seg_size, socket_id);
#endif
diff --git a/app/test/test_distributor.c b/app/test/test_distributor.c
index 9e8c06d..ad46987 100644
--- a/app/test/test_distributor.c
+++ b/app/test/test_distributor.c
@@ -500,7 +500,7 @@ quit_workers(struct rte_distributor *d, struct rte_mempool *p)
worker_idx = 0;
}
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
static int
test_distributor(void)
@@ -528,12 +528,8 @@ test_distributor(void)
const unsigned nb_bufs = (511 * rte_lcore_count()) < BIG_BATCH ?
(BIG_BATCH * 2) - 1 : (511 * rte_lcore_count());
if (p == NULL) {
- p = rte_mempool_create("DT_MBUF_POOL", nb_bufs,
- MBUF_SIZE, BURST,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ p = rte_pktmbuf_pool_create("DT_MBUF_POOL", nb_bufs, BURST,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (p == NULL) {
printf("Error creating mempool\n");
return -1;
diff --git a/app/test/test_distributor_perf.c b/app/test/test_distributor_perf.c
index 31431bb..f04cb15 100644
--- a/app/test/test_distributor_perf.c
+++ b/app/test/test_distributor_perf.c
@@ -209,7 +209,7 @@ quit_workers(struct rte_distributor *d, struct rte_mempool *p)
worker_idx = 0;
}
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
static int
test_distributor_perf(void)
@@ -240,12 +240,8 @@ test_distributor_perf(void)
const unsigned nb_bufs = (511 * rte_lcore_count()) < BIG_BATCH ?
(BIG_BATCH * 2) - 1 : (511 * rte_lcore_count());
if (p == NULL) {
- p = rte_mempool_create("DPT_MBUF_POOL", nb_bufs,
- MBUF_SIZE, BURST,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ p = rte_pktmbuf_pool_create("DPT_MBUF_POOL", nb_bufs, BURST,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (p == NULL) {
printf("Error creating mempool\n");
return -1;
diff --git a/app/test/test_kni.c b/app/test/test_kni.c
index 608901d..506b543 100644
--- a/app/test/test_kni.c
+++ b/app/test/test_kni.c
@@ -47,8 +47,7 @@
#define NB_MBUF 8192
#define MAX_PACKET_SZ 2048
-#define MBUF_SZ \
- (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
#define PKT_BURST_SZ 32
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
#define SOCKET 0
@@ -118,17 +117,10 @@ test_kni_create_mempool(void)
mp = rte_mempool_lookup("kni_mempool");
if (!mp)
- mp = rte_mempool_create("kni_mempool",
+ mp = rte_pktmbuf_pool_create("kni_mempool",
NB_MBUF,
- MBUF_SZ,
- MEMPOOL_CACHE_SZ,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init,
- NULL,
- rte_pktmbuf_init,
- NULL,
- SOCKET,
- 0);
+ MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ,
+ SOCKET);
return mp;
}
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 8c24314..674d8dd 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -75,8 +75,7 @@
ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
ETH_TXQ_FLAGS_NOXSUMTCP)
-#define MBUF_PAYLOAD_SIZE (2048)
-#define MBUF_SIZE (MBUF_PAYLOAD_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE (250)
#define BURST_SIZE (32)
@@ -280,10 +279,9 @@ test_setup(void)
nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + DEF_PKT_BURST +
RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
if (test_params->mbuf_pool == NULL) {
- test_params->mbuf_pool = rte_mempool_create("MBUF_POOL", nb_mbuf_per_pool,
- MBUF_SIZE, MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ test_params->mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ rte_socket_id());
TEST_ASSERT_NOT_NULL(test_params->mbuf_pool,
"rte_mempool_create failed");
}
diff --git a/app/test/test_link_bonding_mode4.c b/app/test/test_link_bonding_mode4.c
index 02380f9..590daad 100644
--- a/app/test/test_link_bonding_mode4.c
+++ b/app/test/test_link_bonding_mode4.c
@@ -65,9 +65,7 @@
#define RX_RING_SIZE 128
#define TX_RING_SIZE 512
-#define MBUF_PAYLOAD_SIZE (2048)
-#define MBUF_SIZE (MBUF_PAYLOAD_SIZE + sizeof(struct rte_mbuf) + \
- RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE (250)
#define BURST_SIZE (32)
@@ -390,11 +388,9 @@ test_setup(void)
if (test_params.mbuf_pool == NULL) {
nb_mbuf_per_pool = TEST_RX_DESC_MAX + DEF_PKT_BURST +
TEST_TX_DESC_MAX + MAX_PKT_BURST;
- test_params.mbuf_pool = rte_mempool_create("TEST_MODE4",
- nb_mbuf_per_pool, MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- socket_id, 0);
+ test_params.mbuf_pool = rte_pktmbuf_pool_create("TEST_MODE4",
+ nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socket_id);
TEST_ASSERT(test_params.mbuf_pool != NULL,
"rte_mempool_create failed\n");
diff --git a/app/test/test_mbuf.c b/app/test/test_mbuf.c
index 1ff66cb..4774263 100644
--- a/app/test/test_mbuf.c
+++ b/app/test/test_mbuf.c
@@ -61,7 +61,7 @@
#include "test.h"
-#define MBUF_SIZE 2048
+#define MBUF_DATA_SIZE 2048
#define NB_MBUF 128
#define MBUF_TEST_DATA_LEN 1464
#define MBUF_TEST_DATA_LEN2 50
@@ -73,7 +73,6 @@
#define REFCNT_MAX_TIMEOUT 10
#define REFCNT_MAX_REF (RTE_MAX_LCORE)
#define REFCNT_MBUF_NUM 64
-#define REFCNT_MBUF_SIZE (sizeof (struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define REFCNT_RING_SIZE (REFCNT_MBUF_NUM * REFCNT_MAX_REF)
#define MAKE_STRING(x) # x
@@ -622,12 +621,10 @@ test_refcnt_mbuf(void)
/* create refcnt pool & ring if they don't exist */
if (refcnt_pool == NULL &&
- (refcnt_pool = rte_mempool_create(
- MAKE_STRING(refcnt_pool),
- REFCNT_MBUF_NUM, REFCNT_MBUF_SIZE, 0,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- SOCKET_ID_ANY, 0)) == NULL) {
+ (refcnt_pool = rte_pktmbuf_pool_create(
+ MAKE_STRING(refcnt_pool),
+ REFCNT_MBUF_NUM, 0, 0, 0,
+ SOCKET_ID_ANY)) == NULL) {
printf("%s: cannot allocate " MAKE_STRING(refcnt_pool) "\n",
__func__);
return (-1);
@@ -764,13 +761,8 @@ test_mbuf(void)
/* create pktmbuf pool if it does not exist */
if (pktmbuf_pool == NULL) {
- pktmbuf_pool =
- rte_mempool_create("test_pktmbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- SOCKET_ID_ANY, 0);
+ pktmbuf_pool = rte_pktmbuf_pool_create("test_pktmbuf_pool",
+ NB_MBUF, 32, 0, MBUF_DATA_SIZE, SOCKET_ID_ANY);
}
if (pktmbuf_pool == NULL) {
diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
index d6a4a45..49a494d 100644
--- a/app/test/test_pmd_perf.c
+++ b/app/test/test_pmd_perf.c
@@ -47,7 +47,7 @@
#define NB_ETHPORTS_USED (1)
#define NB_SOCKETS (2)
#define MEMPOOL_CACHE_SIZE 250
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_PKT_BURST (32)
#define RTE_TEST_RX_DESC_DEFAULT (128)
#define RTE_TEST_TX_DESC_DEFAULT (512)
@@ -289,12 +289,9 @@ init_mbufpool(unsigned nb_mbuf)
if (mbufpool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
mbufpool[socketid] =
- rte_mempool_create(s, nb_mbuf, MBUF_SIZE,
- MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
+ rte_pktmbuf_pool_create(s, nb_mbuf,
+ MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socketid);
if (mbufpool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on socket %d\n",
diff --git a/app/test/test_pmd_ring.c b/app/test/test_pmd_ring.c
index 7490112..53897f7 100644
--- a/app/test/test_pmd_ring.c
+++ b/app/test/test_pmd_ring.c
@@ -48,7 +48,7 @@ static struct rte_mempool *mp;
#define RING_SIZE 256
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 512
static int
@@ -406,12 +406,8 @@ test_pmd_ring_pair_create_attach(void)
static int
test_pmd_ring(void)
{
- mp = rte_mempool_create("mbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mp = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (mp == NULL)
return -1;
diff --git a/app/test/test_reorder.c b/app/test/test_reorder.c
index 61cf8d3..91fbe9a 100644
--- a/app/test/test_reorder.c
+++ b/app/test/test_reorder.c
@@ -50,7 +50,7 @@
#define REORDER_BUFFER_SIZE 16384
#define NUM_MBUFS (2*REORDER_BUFFER_SIZE)
#define REORDER_BUFFER_SIZE_INVALID 2049
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
struct reorder_unittest_params {
struct rte_mempool *p;
@@ -351,12 +351,8 @@ test_setup(void)
/* mempool creation */
if (test_params->p == NULL) {
- test_params->p = rte_mempool_create("RO_MBUF_POOL", NUM_MBUFS,
- MBUF_SIZE, BURST,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ test_params->p = rte_pktmbuf_pool_create("RO_MBUF_POOL",
+ NUM_MBUFS, BURST, 0, MBUF_DATA_SIZE, rte_socket_id());
if (test_params->p == NULL) {
printf("%s: Error creating mempool\n", __func__);
return -1;
diff --git a/app/test/test_sched.c b/app/test/test_sched.c
index 60c62de..c7239f8 100644
--- a/app/test/test_sched.c
+++ b/app/test/test_sched.c
@@ -86,8 +86,7 @@ static struct rte_sched_port_params port_param = {
};
#define NB_MBUF 32
-#define MAX_PACKET_SZ 2048
-#define MBUF_SZ (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SZ (2048 + RTE_PKTMBUF_HEADROOM)
#define PKT_BURST_SZ 32
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
#define SOCKET 0
@@ -100,17 +99,8 @@ create_mempool(void)
mp = rte_mempool_lookup("test_sched");
if (!mp)
- mp = rte_mempool_create("test_sched",
- NB_MBUF,
- MBUF_SZ,
- MEMPOOL_CACHE_SZ,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init,
- NULL,
- rte_pktmbuf_init,
- NULL,
- SOCKET,
- 0);
+ mp = rte_pktmbuf_pool_create("test_sched", NB_MBUF,
+ MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, SOCKET);
return mp;
}
diff --git a/app/test/test_table.c b/app/test/test_table.c
index c3093cc..de6c27d 100644
--- a/app/test/test_table.c
+++ b/app/test/test_table.c
@@ -89,15 +89,10 @@ app_init_mbuf_pools(void)
printf("Getting/Creating the mempool ...\n");
pool = rte_mempool_lookup("mempool");
if (!pool) {
- pool = rte_mempool_create(
+ pool = rte_pktmbuf_pool_create(
"mempool",
POOL_SIZE,
- POOL_BUFFER_SIZE,
- POOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- 0,
+ POOL_CACHE_SIZE, 0, POOL_BUFFER_SIZE,
0);
if (pool == NULL)
rte_panic("Cannot create mbuf pool\n");
diff --git a/app/test/test_table.h b/app/test/test_table.h
index 64e9427..be331c0 100644
--- a/app/test/test_table.h
+++ b/app/test/test_table.h
@@ -65,7 +65,7 @@
#define PORT_TX_RING_SIZE 512
#define RING_RX_SIZE 128
#define RING_TX_SIZE 128
-#define POOL_BUFFER_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define POOL_BUFFER_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define POOL_SIZE (32 * 1024)
#define POOL_CACHE_SIZE 256
#define BURST_SIZE 8
@@ -73,7 +73,6 @@
#define MAX_DUMMY_PORTS 2
#define MP_NAME "dummy_port_mempool"
#define MBUF_COUNT (8000 * MAX_DUMMY_PORTS)
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define MP_CACHE_SZ 256
#define MP_SOCKET 0
#define MP_FLAGS 0
diff --git a/examples/bond/main.c b/examples/bond/main.c
index 67c283d..fcb4c4e 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -96,7 +96,7 @@
#define RTE_LOGTYPE_DCB RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF (1024*8)
#define MAX_PKT_BURST 32
@@ -738,12 +738,8 @@ main(int argc, char *argv[])
else if (nb_ports > MAX_PORTS)
rte_exit(EXIT_FAILURE, "You can have max 4 ports\n");
- mbuf_pool = rte_mempool_create("MBUF_POOL", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/distributor/main.c b/examples/distributor/main.c
index 13fb04d..78fe3e9 100644
--- a/examples/distributor/main.c
+++ b/examples/distributor/main.c
@@ -47,7 +47,7 @@
#define RX_RING_SIZE 256
#define TX_RING_SIZE 512
#define NUM_MBUFS ((64*1024)-1)
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
#define RTE_RING_SZ 1024
@@ -528,12 +528,9 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
"when using a single port\n");
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
nb_ports_available = nb_ports;
diff --git a/examples/dpdk_qat/main.c b/examples/dpdk_qat/main.c
index 20e78bc..053be91 100644
--- a/examples/dpdk_qat/main.c
+++ b/examples/dpdk_qat/main.c
@@ -70,7 +70,7 @@
#include "crypto.h"
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF (32 * 1024)
#define MAX_PKT_BURST 32
@@ -598,7 +598,6 @@ print_ethaddr(const char *name, const struct ether_addr *eth_addr)
static int
init_mem(void)
{
- const unsigned flags = 0;
int socketid;
unsigned lcoreid;
char s[64];
@@ -613,11 +612,8 @@ init_mem(void)
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
- rte_mempool_create(s, NB_MBUF, MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, flags);
+ rte_pktmbuf_pool_create(s, NB_MBUF, 32, 0,
+ MBUF_DATA_SIZE, socketid);
if (pktmbuf_pool[socketid] == NULL) {
printf("Cannot init mbuf pool on socket %d\n", socketid);
return -1;
diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
index 14582de..b3fe170 100644
--- a/examples/exception_path/main.c
+++ b/examples/exception_path/main.c
@@ -81,11 +81,10 @@
#define MAX_PORTS (RTE_MAX_LCORE / 2)
/* Max size of a single packet */
-#define MAX_PACKET_SZ 2048
+#define MAX_PACKET_SZ (2048)
-/* Number of bytes needed for each mbuf */
-#define MBUF_SZ \
- (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+/* Size of the data buffer in each mbuf */
+#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
/* Number of mbufs in mempool that is created */
#define NB_MBUF 8192
@@ -532,11 +531,8 @@ main(int argc, char** argv)
parse_args(argc, argv);
/* Create the mbuf pool */
- pktmbuf_pool = rte_mempool_create("mbuf_pool", NB_MBUF, MBUF_SZ,
- MEMPOOL_CACHE_SZ,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
+ MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
if (pktmbuf_pool == NULL) {
FATAL_ERROR("Could not initialise mbuf pool");
return -1;
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index cf63718..c702fdd 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -76,7 +76,7 @@
#define RTE_LOGTYPE_IP_FRAG RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
@@ -744,12 +744,8 @@ init_mem(void)
socket);
snprintf(buf, sizeof(buf), "pool_direct_%i", socket);
- mp = rte_mempool_create(buf, NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket, 0);
+ mp = rte_pktmbuf_pool_create(buf, NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, socket);
if (mp == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create direct mempool\n");
return -1;
@@ -762,12 +758,8 @@ init_mem(void)
socket);
snprintf(buf, sizeof(buf), "pool_indirect_%i", socket);
- mp = rte_mempool_create(buf, NB_MBUF,
- sizeof(struct rte_mbuf), 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket, 0);
+ mp = rte_pktmbuf_pool_create(buf, NB_MBUF, 32, 0, 0,
+ socket);
if (mp == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create indirect mempool\n");
return -1;
diff --git a/examples/ip_pipeline/init.c b/examples/ip_pipeline/init.c
index 61d71c3..275fb35 100644
--- a/examples/ip_pipeline/init.c
+++ b/examples/ip_pipeline/init.c
@@ -146,8 +146,7 @@ struct app_params app = {
.bsz_swq_wr = 64,
/* Buffer pool */
- .pool_buffer_size = 2048 + sizeof(struct rte_mbuf) +
- RTE_PKTMBUF_HEADROOM,
+ .pool_buffer_size = 2048 + RTE_PKTMBUF_HEADROOM,
.pool_size = 32 * 1024,
.pool_cache_size = 256,
@@ -363,37 +362,18 @@ app_get_ring_resp(uint32_t core_id)
static void
app_init_mbuf_pools(void)
{
- struct rte_pktmbuf_pool_private indirect_mbp_priv;
-
/* Init the buffer pool */
RTE_LOG(INFO, USER1, "Creating the mbuf pool ...\n");
- app.pool = rte_mempool_create(
- "mempool",
- app.pool_size,
- app.pool_buffer_size,
- app.pool_cache_size,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(),
- 0);
+ app.pool = rte_pktmbuf_pool_create("mempool", app.pool_size,
+ app.pool_cache_size, 0, app.pool_buffer_size, rte_socket_id());
if (app.pool == NULL)
rte_panic("Cannot create mbuf pool\n");
/* Init the indirect buffer pool */
RTE_LOG(INFO, USER1, "Creating the indirect mbuf pool ...\n");
- indirect_mbp_priv.mbuf_data_room_size = 0;
- indirect_mbp_priv.mbuf_priv_size = sizeof(struct app_pkt_metadata);
- app.indirect_pool = rte_mempool_create(
- "indirect mempool",
- app.pool_size,
- sizeof(struct rte_mbuf) + sizeof(struct app_pkt_metadata),
- app.pool_cache_size,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, &indirect_mbp_priv,
- rte_pktmbuf_init, NULL,
- rte_socket_id(),
- 0);
+ app.indirect_pool = rte_pktmbuf_pool_create("indirect mempool",
+ app.pool_size, app.pool_cache_size,
+ sizeof(struct app_pkt_metadata), 0, rte_socket_id());
if (app.indirect_pool == NULL)
rte_panic("Cannot create mbuf pool\n");
diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
index 19832d8..575e989 100644
--- a/examples/ipv4_multicast/main.c
+++ b/examples/ipv4_multicast/main.c
@@ -77,13 +77,12 @@
#define MCAST_CLONE_PORTS 2
#define MCAST_CLONE_SEGS 2
-#define PKT_MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define PKT_MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_PKT_MBUF 8192
-#define HDR_MBUF_SIZE (sizeof(struct rte_mbuf) + 2 * RTE_PKTMBUF_HEADROOM)
+#define HDR_MBUF_DATA_SIZE (2 * RTE_PKTMBUF_HEADROOM)
#define NB_HDR_MBUF (NB_PKT_MBUF * MAX_PORTS)
-#define CLONE_MBUF_SIZE (sizeof(struct rte_mbuf))
#define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
/* allow max jumbo frame 9.5 KB */
@@ -690,26 +689,20 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");
/* create the mbuf pools */
- packet_pool = rte_mempool_create("packet_pool", NB_PKT_MBUF,
- PKT_MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ packet_pool = rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF, 32,
+ 0, PKT_MBUF_DATA_SIZE, rte_socket_id());
if (packet_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init packet mbuf pool\n");
- header_pool = rte_mempool_create("header_pool", NB_HDR_MBUF,
- HDR_MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ header_pool = rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF, 32,
+ 0, HDR_MBUF_DATA_SIZE, rte_socket_id());
if (header_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init header mbuf pool\n");
- clone_pool = rte_mempool_create("clone_pool", NB_CLONE_MBUF,
- CLONE_MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ clone_pool = rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF, 32,
+ 0, 0, rte_socket_id());
if (clone_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init clone mbuf pool\n");
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 19d25d4..96ca473 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -80,9 +80,8 @@
/* Max size of a single packet */
#define MAX_PACKET_SZ 2048
-/* Number of bytes needed for each mbuf */
-#define MBUF_SZ \
- (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+/* Size of the data buffer in each mbuf */
+#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
/* Number of mbufs in mempool that is created */
#define NB_MBUF (8192 * 16)
@@ -867,11 +866,8 @@ main(int argc, char** argv)
rte_exit(EXIT_FAILURE, "Could not parse input parameters\n");
/* Create the mbuf pool */
- pktmbuf_pool = rte_mempool_create("mbuf_pool", NB_MBUF, MBUF_SZ,
- MEMPOOL_CACHE_SZ,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
+ MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
if (pktmbuf_pool == NULL) {
rte_exit(EXIT_FAILURE, "Could not initialise mbuf pool\n");
return -1;
diff --git a/examples/l2fwd-ivshmem/host/host.c b/examples/l2fwd-ivshmem/host/host.c
index 4f8d23e..197f22b 100644
--- a/examples/l2fwd-ivshmem/host/host.c
+++ b/examples/l2fwd-ivshmem/host/host.c
@@ -71,7 +71,7 @@ static uint32_t l2fwd_ivshmem_enabled_port_mask = 0;
static struct ether_addr l2fwd_ivshmem_ports_eth_addr[RTE_MAX_ETHPORTS];
#define NB_MBUF 8192
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
@@ -670,12 +670,8 @@ int main(int argc, char **argv)
/* create a shared mbuf pool */
l2fwd_ivshmem_pktmbuf_pool =
- rte_mempool_create(MBUF_MP_NAME, NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(MBUF_MP_NAME, NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (l2fwd_ivshmem_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index f990045..fcebbda 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -70,7 +70,7 @@
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -833,12 +833,8 @@ main(int argc, char **argv)
/* create the mbuf pool */
l2fwd_pktmbuf_pool =
- rte_mempool_create("mbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 17621ee..d0a1ec8 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -71,7 +71,7 @@
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -560,13 +560,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
/* create the mbuf pool */
- l2fwd_pktmbuf_pool =
- rte_mempool_create("mbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index fce55f3..1a04004 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -80,7 +80,7 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* This expression is used to calculate the number of mbufs needed
@@ -1848,12 +1848,9 @@ init_mem(unsigned nb_mbuf)
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
- rte_mempool_create(s, nb_mbuf, MBUF_SIZE,
- MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
+ rte_pktmbuf_pool_create(s, nb_mbuf,
+ MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on socket %d\n",
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 4221239..bb0b66f 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -121,7 +121,7 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* This expression is used to calculate the number of mbufs needed depending on
@@ -1379,12 +1379,9 @@ init_mem(unsigned nb_mbuf)
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
- rte_mempool_create(s, nb_mbuf,
- MBUF_SIZE, MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
+ rte_pktmbuf_pool_create(s, nb_mbuf,
+ MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on socket %d\n",
diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
index 20ba03a..f007bc1 100644
--- a/examples/l3fwd-vf/main.c
+++ b/examples/l3fwd-vf/main.c
@@ -94,7 +94,7 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* This expression is used to calculate the number of mbufs needed depending on user input, taking
@@ -924,13 +924,9 @@ init_mem(unsigned nb_mbuf)
}
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
- pktmbuf_pool[socketid] =
- rte_mempool_create(s, nb_mbuf, MBUF_SIZE,
- MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
+ pktmbuf_pool[socketid] = rte_pktmbuf_pool_create(s,
+ nb_mbuf, MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool on socket %d\n", socketid);
else
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 90e177f..7871038 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -119,7 +119,7 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* This expression is used to calculate the number of mbufs needed depending on user input, taking
@@ -2315,11 +2315,9 @@ init_mem(unsigned nb_mbuf)
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
- rte_mempool_create(s, nb_mbuf, MBUF_SIZE, MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socketid, 0);
+ rte_pktmbuf_pool_create(s, nb_mbuf,
+ MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on socket %d\n", socketid);
diff --git a/examples/link_status_interrupt/main.c b/examples/link_status_interrupt/main.c
index e6fb218..6adbd79 100644
--- a/examples/link_status_interrupt/main.c
+++ b/examples/link_status_interrupt/main.c
@@ -72,7 +72,7 @@
#define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -614,12 +614,8 @@ main(int argc, char **argv)
/* create the mbuf pool */
lsi_pktmbuf_pool =
- rte_mempool_create("mbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32, 0,
+ MBUF_DATA_SIZE, rte_socket_id());
if (lsi_pktmbuf_pool == NULL)
rte_panic("Cannot init mbuf pool\n");
diff --git a/examples/load_balancer/init.c b/examples/load_balancer/init.c
index b35f797..5a56078 100644
--- a/examples/load_balancer/init.c
+++ b/examples/load_balancer/init.c
@@ -127,16 +127,10 @@ app_init_mbuf_pools(void)
snprintf(name, sizeof(name), "mbuf_pool_%u", socket);
printf("Creating the mbuf pool for socket %u ...\n", socket);
- app.pools[socket] = rte_mempool_create(
- name,
- APP_DEFAULT_MEMPOOL_BUFFERS,
- APP_DEFAULT_MBUF_SIZE,
+ app.pools[socket] = rte_pktmbuf_pool_create(
+ name, APP_DEFAULT_MEMPOOL_BUFFERS,
APP_DEFAULT_MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket,
- 0);
+ 0, APP_DEFAULT_MBUF_DATA_SIZE, socket);
if (app.pools[socket] == NULL) {
rte_panic("Cannot create mbuf pool on socket %u\n", socket);
}
diff --git a/examples/load_balancer/main.h b/examples/load_balancer/main.h
index d9f878b..17c0f77 100644
--- a/examples/load_balancer/main.h
+++ b/examples/load_balancer/main.h
@@ -82,8 +82,8 @@
/* Mempools */
-#ifndef APP_DEFAULT_MBUF_SIZE
-#define APP_DEFAULT_MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#ifndef APP_DEFAULT_MBUF_DATA_SIZE
+#define APP_DEFAULT_MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#endif
#ifndef APP_DEFAULT_MEMPOOL_BUFFERS
diff --git a/examples/multi_process/client_server_mp/mp_server/init.c b/examples/multi_process/client_server_mp/mp_server/init.c
index aadee76..dc3647d 100644
--- a/examples/multi_process/client_server_mp/mp_server/init.c
+++ b/examples/multi_process/client_server_mp/mp_server/init.c
@@ -71,9 +71,7 @@
#define MBUFS_PER_CLIENT 1536
#define MBUFS_PER_PORT 1536
#define MBUF_CACHE_SIZE 512
-#define MBUF_OVERHEAD (sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-#define RX_MBUF_DATA_SIZE 2048
-#define MBUF_SIZE (RX_MBUF_DATA_SIZE + MBUF_OVERHEAD)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define RTE_MP_RX_DESC_DEFAULT 512
#define RTE_MP_TX_DESC_DEFAULT 512
@@ -104,10 +102,8 @@ init_mbuf_pools(void)
* seems faster to use a cache instead */
printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
PKTMBUF_POOL_NAME, num_mbufs);
- pktmbuf_pool = rte_mempool_create(PKTMBUF_POOL_NAME, num_mbufs,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init,
- NULL, rte_pktmbuf_init, NULL, rte_socket_id(), NO_FLAGS );
+ pktmbuf_pool = rte_pktmbuf_pool_create(PKTMBUF_POOL_NAME, num_mbufs,
+ MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
return (pktmbuf_pool == NULL); /* 0 on success */
}
diff --git a/examples/multi_process/symmetric_mp/main.c b/examples/multi_process/symmetric_mp/main.c
index 48448b4..7829c86 100644
--- a/examples/multi_process/symmetric_mp/main.c
+++ b/examples/multi_process/symmetric_mp/main.c
@@ -78,7 +78,7 @@
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
@@ -446,11 +446,9 @@ main(int argc, char **argv)
proc_type = rte_eal_process_type();
mp = (proc_type == RTE_PROC_SECONDARY) ?
rte_mempool_lookup(_SMP_MBUF_POOL) :
- rte_mempool_create(_SMP_MBUF_POOL, NB_MBUFS, MBUF_SIZE,
- MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
+ MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ rte_socket_id());
if (mp == NULL)
rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");
diff --git a/examples/netmap_compat/bridge/bridge.c b/examples/netmap_compat/bridge/bridge.c
index 0a8efbe..2d935cb 100644
--- a/examples/netmap_compat/bridge/bridge.c
+++ b/examples/netmap_compat/bridge/bridge.c
@@ -47,9 +47,8 @@
#include "compat_netmap.h"
-#define BUF_SIZE 2048
-#define MBUF_SIZE (BUF_SIZE + sizeof(struct rte_mbuf) + \
- RTE_PKTMBUF_HEADROOM)
+#define BUF_SIZE (2048)
+#define MBUF_DATA_SIZE (BUF_SIZE + RTE_PKTMBUF_HEADROOM)
#define MBUF_PER_POOL 8192
@@ -272,11 +271,8 @@ int main(int argc, char *argv[])
if (rte_eth_dev_count() < 1)
rte_exit(EXIT_FAILURE, "Not enough ethernet ports available\n");
- pool = rte_mempool_create("mbuf_pool", MBUF_PER_POOL, MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ pool = rte_pktmbuf_pool_create("mbuf_pool", MBUF_PER_POOL, 32, 0,
+ MBUF_DATA_SIZE, rte_socket_id());
if (pool == NULL)
rte_exit(EXIT_FAILURE, "Couldn't create mempool\n");
diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
index f0a1b5a..5403c33 100644
--- a/examples/packet_ordering/main.c
+++ b/examples/packet_ordering/main.c
@@ -50,7 +50,7 @@
#define MAX_PKTS_BURST 32
#define REORDER_BUFFER_SIZE 8192
#define MBUF_PER_POOL 65535
-#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_POOL_CACHE_SIZE 250
#define RING_SIZE 16384
@@ -622,12 +622,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Error: number of ports must be even, except "
"when using a single port\n");
- mbuf_pool = rte_mempool_create("mbuf_pool", MBUF_PER_POOL, MBUF_SIZE,
- MBUF_POOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", MBUF_PER_POOL,
+ MBUF_POOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "%s\n", rte_strerror(rte_errno));
diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
index 4a981c6..a5e2510 100644
--- a/examples/qos_meter/main.c
+++ b/examples/qos_meter/main.c
@@ -70,7 +70,7 @@
* Buffer pool configuration
*
***/
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MEMPOOL_CACHE_SIZE 256
@@ -360,9 +360,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Invalid input arguments\n");
/* Buffer pool init */
- pool = rte_mempool_create("pool", NB_MBUF, MBUF_SIZE, MEMPOOL_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL, rte_socket_id(), 0);
+ pool = rte_pktmbuf_pool_create("pool", NB_MBUF, MEMPOOL_CACHE_SIZE,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (pool == NULL)
rte_exit(EXIT_FAILURE, "Buffer pool creation error\n");
diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
index f38802e..aaf3466 100644
--- a/examples/qos_sched/init.c
+++ b/examples/qos_sched/init.c
@@ -335,13 +335,9 @@ int app_init(void)
/* create the mbuf pools for each RX Port */
snprintf(pool_name, MAX_NAME_LEN, "mbuf_pool%u", i);
- qos_conf[i].mbuf_pool = rte_mempool_create(pool_name, mp_size, MBUF_SIZE,
- burst_conf.rx_burst * 4,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_eth_dev_socket_id(qos_conf[i].rx_port),
- 0);
+ qos_conf[i].mbuf_pool = rte_pktmbuf_pool_create(pool_name,
+ mp_size, burst_conf.rx_burst * 4, 0, MBUF_DATA_SIZE,
+ rte_eth_dev_socket_id(qos_conf[i].rx_port));
if (qos_conf[i].mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool for socket %u\n", i);
diff --git a/examples/qos_sched/main.h b/examples/qos_sched/main.h
index 971ec27..0e6f264 100644
--- a/examples/qos_sched/main.h
+++ b/examples/qos_sched/main.h
@@ -50,7 +50,7 @@ extern "C" {
#define APP_RX_DESC_DEFAULT 128
#define APP_TX_DESC_DEFAULT 256
-#define MBUF_SIZE (1528 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (1528 + RTE_PKTMBUF_HEADROOM)
#define APP_RING_SIZE (8*1024)
#define NB_MBUF (2*1024*1024)
diff --git a/examples/quota_watermark/include/conf.h b/examples/quota_watermark/include/conf.h
index 8d95aaa..e80aca5 100644
--- a/examples/quota_watermark/include/conf.h
+++ b/examples/quota_watermark/include/conf.h
@@ -40,7 +40,7 @@
#define RX_DESC_PER_QUEUE 128
#define TX_DESC_PER_QUEUE 512
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_PER_POOL 8192
#define QUOTA_WATERMARK_MEMZONE_NAME "qw_global_vars"
diff --git a/examples/quota_watermark/qw/main.c b/examples/quota_watermark/qw/main.c
index f269546..8ed0214 100644
--- a/examples/quota_watermark/qw/main.c
+++ b/examples/quota_watermark/qw/main.c
@@ -335,11 +335,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Invalid quota/watermark argument(s)\n");
/* Create a pool of mbuf to store packets */
- mbuf_pool = rte_mempool_create("mbuf_pool", MBUF_PER_POOL, MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", MBUF_PER_POOL, 32, 0,
+ MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_panic("%s\n", rte_strerror(rte_errno));
diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
index 21117ce..fb8da51 100644
--- a/examples/rxtx_callbacks/main.c
+++ b/examples/rxtx_callbacks/main.c
@@ -43,7 +43,7 @@
#define TX_RING_SIZE 512
#define NUM_MBUFS 8191
-#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
@@ -204,12 +204,9 @@ main(int argc, char *argv[])
if (nb_ports < 2 || (nb_ports & 1))
rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
index 1bce6e7..ae606bf 100644
--- a/examples/skeleton/basicfwd.c
+++ b/examples/skeleton/basicfwd.c
@@ -43,7 +43,7 @@
#define TX_RING_SIZE 512
#define NUM_MBUFS 8191
-#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
@@ -190,15 +190,8 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
/* Creates a new mempool in memory to hold the mbufs. */
- mbuf_pool = rte_mempool_create("MBUF_POOL",
- NUM_MBUFS * nb_ports,
- MBUF_SIZE,
- MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(),
- 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+ MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index fc73d1e..22d6a4b 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -67,7 +67,7 @@
(num_switching_cores*MBUF_CACHE_SIZE))
#define MBUF_CACHE_SIZE 128
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* No frame data buffer allocated from host are required for zero copy
@@ -75,8 +75,7 @@
* directly use it.
*/
#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
-#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
- + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE_ZCP 0
#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
@@ -2844,11 +2843,8 @@ static void
setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
char *ring_name, uint32_t nb_mbuf)
{
- vpool_array[index].pool
- = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
- MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL, socket, 0);
+ vpool_array[index].pool = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
+ MBUF_CACHE_SIZE_ZCP, 0, MBUF_DATA_SIZE_ZCP, socket);
if (vpool_array[index].pool != NULL) {
vpool_array[index].ring
= rte_ring_create(ring_name,
@@ -2932,15 +2928,9 @@ main(int argc, char *argv[])
if (zero_copy == 0) {
/* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create(
- "MBUF_POOL",
- NUM_MBUFS_PER_PORT
- * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * valid_num_ports, MBUF_CACHE_SIZE,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vhost_xen/main.c b/examples/vhost_xen/main.c
index b4a86e3..b672bf3 100644
--- a/examples/vhost_xen/main.c
+++ b/examples/vhost_xen/main.c
@@ -67,7 +67,7 @@
(num_switching_cores*MBUF_CACHE_SIZE))
#define MBUF_CACHE_SIZE 64
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
@@ -1474,12 +1474,9 @@ main(int argc, char *argv[])
}
/* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS_PER_PORT * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * valid_num_ports, MBUF_CACHE_SIZE, 0,
+ MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
index 7001860..7596bac 100644
--- a/examples/vmdq/main.c
+++ b/examples/vmdq/main.c
@@ -76,7 +76,7 @@
*/
#define NUM_MBUFS_PER_PORT (128*512)
#define MBUF_CACHE_SIZE 64
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_PKT_BURST 32
@@ -613,12 +613,9 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error with valid ports number is not even or less than 2\n");
}
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS_PER_PORT * nb_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * nb_ports, MBUF_CACHE_SIZE,
+ 0, MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
index 048c167..3c7f2b3 100644
--- a/examples/vmdq_dcb/main.c
+++ b/examples/vmdq_dcb/main.c
@@ -74,7 +74,7 @@
#define NUM_MBUFS 64*1024
#define MBUF_CACHE_SIZE 64
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define INVALID_PORT_ID 0xFF
@@ -441,12 +441,8 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error with valid ports number is not even or less than 2\n");
}
- mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+ MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/lib/librte_pmd_bond/rte_eth_bond_alb.c b/lib/librte_pmd_bond/rte_eth_bond_alb.c
index 5778b25..6df318e 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_alb.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_alb.c
@@ -63,7 +63,7 @@ bond_mode_alb_enable(struct rte_eth_dev *bond_dev)
struct bond_dev_private *internals = bond_dev->data->dev_private;
struct client_data *hash_table = internals->mode6.client_table;
- uint16_t element_size;
+ uint16_t data_size;
char mem_name[RTE_ETH_NAME_MAX_LEN];
int socket_id = bond_dev->pci_dev->numa_node;
@@ -79,15 +79,13 @@ bond_mode_alb_enable(struct rte_eth_dev *bond_dev)
* 256 is size of ETH header, ARP header and nested VLAN headers.
* The value is chosen to be cache aligned.
*/
- element_size = 256 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM;
+ data_size = 256 + RTE_PKTMBUF_HEADROOM;
snprintf(mem_name, sizeof(mem_name), "%s_MODE6", bond_dev->data->name);
- internals->mode6.mempool = rte_mempool_create(mem_name,
- 512 * RTE_MAX_ETHPORTS,
- element_size,
- RTE_MEMPOOL_CACHE_MAX_SIZE >= 32 ?
- 32 : RTE_MEMPOOL_CACHE_MAX_SIZE,
- sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init,
- NULL, rte_pktmbuf_init, NULL, socket_id, 0);
+ internals->mode6.mempool = rte_pktmbuf_pool_create(mem_name,
+ 512 * RTE_MAX_ETHPORTS,
+ RTE_MEMPOOL_CACHE_MAX_SIZE >= 32 ?
+ 32 : RTE_MEMPOOL_CACHE_MAX_SIZE,
+ 0, data_size, socket_id);
if (internals->mode6.mempool == NULL) {
RTE_LOG(ERR, PMD, "%s: Failed to initialize ALB mempool.\n",
--
2.1.4
next prev parent reply other threads:[~2015-04-20 15:41 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 17:00 [dpdk-dev] [PATCH 0/5] mbuf: enhancements of mbuf clones Olivier Matz
2015-03-25 17:00 ` [dpdk-dev] [PATCH 1/5] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-03-26 13:35 ` Bruce Richardson
2015-03-26 15:30 ` Olivier MATZ
2015-03-25 17:00 ` [dpdk-dev] [PATCH 2/5] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-03-25 17:00 ` [dpdk-dev] [PATCH 3/5] test/mbuf: rename mc variable in m Olivier Matz
2015-03-25 17:00 ` [dpdk-dev] [PATCH 4/5] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-03-25 17:00 ` [dpdk-dev] [PATCH 5/5] test/mbuf: verify that cloning a clone works properly Olivier Matz
2015-03-26 8:48 ` Olivier MATZ
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 0/5] mbuf: enhancements of mbuf clones Olivier Matz
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 1/5] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-03-26 17:13 ` Zoltan Kiss
2015-03-27 0:24 ` Ananyev, Konstantin
2015-03-27 9:07 ` Olivier MATZ
2015-03-27 13:56 ` Olivier MATZ
2015-03-27 14:25 ` Ananyev, Konstantin
2015-03-27 15:17 ` Olivier MATZ
2015-03-27 18:11 ` Zoltan Kiss
2015-03-28 21:19 ` Olivier MATZ
2015-03-30 12:34 ` Ananyev, Konstantin
2015-03-30 19:55 ` Olivier MATZ
2015-03-30 23:17 ` Ananyev, Konstantin
2015-03-31 19:01 ` Olivier MATZ
2015-04-01 13:48 ` Ananyev, Konstantin
2015-04-01 15:18 ` Olivier MATZ
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 2/5] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 3/5] test/mbuf: rename mc variable in m Olivier Matz
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 4/5] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-03-26 15:59 ` [dpdk-dev] [PATCH v2 5/5] test/mbuf: verify that cloning a clone works properly Olivier Matz
2015-03-31 19:22 ` [dpdk-dev] [PATCH v3 0/5] mbuf: enhancements of mbuf clones Olivier Matz
2015-03-31 19:23 ` [dpdk-dev] [PATCH v3 1/5] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-04-02 14:32 ` Zoltan Kiss
2015-04-02 17:21 ` Ananyev, Konstantin
2015-04-06 21:49 ` Olivier MATZ
2015-04-07 12:40 ` Ananyev, Konstantin
2015-04-07 15:45 ` Olivier MATZ
2015-04-07 17:17 ` Ananyev, Konstantin
2015-04-08 9:44 ` Olivier MATZ
2015-04-08 13:45 ` Ananyev, Konstantin
2015-04-09 13:06 ` Olivier MATZ
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 00/12] mbuf: enhancements of mbuf clones Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 01/12] mbuf: fix mbuf data room size calculation rte_pktmbuf_pool_init Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 02/12] examples: always initialize mbuf_pool private area Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 03/12] mbuf: add accessors to get data room size and private size Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 04/12] mbuf: fix rte_pktmbuf_init when mbuf private size is not zero Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 05/12] testpmd: use standard functions to initialize mbufs and mbuf pool Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 06/12] mbuf: introduce a new helper to create a " Olivier Matz
2015-04-20 15:41 ` Olivier Matz [this message]
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 08/12] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 09/12] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 10/12] test/mbuf: rename mc variable in m Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 11/12] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-04-20 15:41 ` [dpdk-dev] [PATCH v4 12/12] test/mbuf: verify that cloning a clone works properly Olivier Matz
2015-04-20 16:53 ` [dpdk-dev] [PATCH v4 00/12] mbuf: enhancements of mbuf clones Neil Horman
2015-04-20 17:07 ` Olivier MATZ
2015-04-20 17:21 ` Neil Horman
2015-04-20 18:24 ` Olivier MATZ
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 " Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 01/12] mbuf: fix mbuf data room size calculation rte_pktmbuf_pool_init Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 02/12] examples: always initialize mbuf_pool private area Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 03/12] mbuf: add accessors to get data room size and private size Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 04/12] mbuf: fix rte_pktmbuf_init when mbuf private size is not zero Olivier Matz
2015-04-21 15:07 ` Ananyev, Konstantin
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 05/12] testpmd: use standard functions to initialize mbufs and mbuf pool Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 06/12] mbuf: introduce a new helper to create a " Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 07/12] apps: use rte_pktmbuf_pool_create to create mbuf pools Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 08/12] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-04-21 15:01 ` Ananyev, Konstantin
2015-04-21 15:26 ` Olivier MATZ
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 09/12] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 10/12] test/mbuf: rename mc variable in m Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 11/12] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-04-21 9:55 ` [dpdk-dev] [PATCH v5 12/12] test/mbuf: verify that cloning a clone works properly Olivier Matz
2015-04-21 11:50 ` [dpdk-dev] [PATCH v5 00/12] mbuf: enhancements of mbuf clones Neil Horman
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 00/13] " Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 01/13] mbuf: fix mbuf data room size calculation rte_pktmbuf_pool_init Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 02/13] examples: always initialize mbuf_pool private area Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 03/13] mbuf: add accessors to get data room size and private size Olivier Matz
2015-04-28 9:15 ` Thomas Monjalon
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 04/13] mbuf: fix rte_pktmbuf_init when mbuf private size is not zero Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 05/13] testpmd: use standard functions to initialize mbufs and mbuf pool Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 06/13] mbuf: introduce a new helper to create a " Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 07/13] apps: use rte_pktmbuf_pool_create to create mbuf pools Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 08/13] mbuf: fix clone support when application uses private mbuf data Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 09/13] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 10/13] test/mbuf: rename mc variable in m Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 11/13] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 12/13] test/mbuf: verify that cloning a clone works properly Olivier Matz
2015-04-22 9:57 ` [dpdk-dev] [PATCH v6 13/13] test/mbuf: add a test case for clone with different priv size Olivier Matz
2015-04-22 11:59 ` [dpdk-dev] [PATCH v6 00/13] mbuf: enhancements of mbuf clones Ananyev, Konstantin
2015-04-24 10:38 ` Zoltan Kiss
2015-04-27 17:38 ` Thomas Monjalon
2015-04-28 11:15 ` Zoltan Kiss
2015-05-07 1:57 ` Xu, HuilongX
2015-05-07 7:32 ` Olivier MATZ
2015-05-07 9:39 ` Ananyev, Konstantin
2015-04-28 9:50 ` Thomas Monjalon
2015-03-31 19:23 ` [dpdk-dev] [PATCH v3 2/5] mbuf: allow to clone an indirect mbuf Olivier Matz
2015-03-31 19:23 ` [dpdk-dev] [PATCH v3 3/5] test/mbuf: rename mc variable in m Olivier Matz
2015-03-31 19:23 ` [dpdk-dev] [PATCH v3 4/5] test/mbuf: enhance mbuf refcnt test Olivier Matz
2015-03-31 19:23 ` [dpdk-dev] [PATCH v3 5/5] test/mbuf: verify that cloning a clone works properly Olivier Matz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429544496-22532-8-git-send-email-olivier.matz@6wind.com \
--to=olivier.matz@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).