From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Cc: monica.kenguva@intel.com, steven.j.murray@intel.com,
shannon.nelson@intel.com
Subject: [dpdk-dev] [PATCH v2 33/33] i40e/base: modifications for future use
Date: Thu, 30 Apr 2015 23:03:39 +0800 [thread overview]
Message-ID: <1430406219-23901-34-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1430406219-23901-1-git-send-email-helin.zhang@intel.com>
Miscellaneous modifications are added as follows for future use.
- Admin queue command opcodes
- struct i40e_aqc_arp_proxy_data
- struct i40e_aq_set_phy_config
- struct i40e_aqc_nvm_config_data_immediate_field
- struct i40e_aqc_oem_param_change
- struct i40e_aqc_opc_oem_ocsd_initialize
- struct i40e_aqc_opc_oem_ocbb_initialize
In addition, sturcture and command length check at compile time
are added for each admin queue opcodes in order to report any
potential issues as early as possible.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h | 89 +++++++++++++++++++++++++++---
1 file changed, 80 insertions(+), 9 deletions(-)
diff --git a/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h b/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
index ac410a5..6fd99b7 100644
--- a/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
+++ b/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
@@ -277,6 +277,8 @@ enum i40e_admin_queue_opc {
/* OEM commands */
i40e_aqc_opc_oem_parameter_change = 0xFE00,
i40e_aqc_opc_oem_device_status_change = 0xFE01,
+ i40e_aqc_opc_oem_ocsd_initialize = 0xFE02,
+ i40e_aqc_opc_oem_ocbb_initialize = 0xFE03,
/* debug commands */
i40e_aqc_opc_debug_get_deviceid = 0xFF00,
@@ -285,7 +287,6 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_debug_write_reg = 0xFF04,
i40e_aqc_opc_debug_modify_reg = 0xFF07,
i40e_aqc_opc_debug_dump_internals = 0xFF08,
- i40e_aqc_opc_debug_modify_internals = 0xFF09,
};
/* command structures and indirect data structures */
@@ -419,6 +420,7 @@ struct i40e_aqc_list_capabilities_element_resp {
#define I40E_AQ_CAP_ID_VSI 0x0017
#define I40E_AQ_CAP_ID_DCB 0x0018
#define I40E_AQ_CAP_ID_FCOE 0x0021
+#define I40E_AQ_CAP_ID_ISCSI 0x0022
#define I40E_AQ_CAP_ID_RSS 0x0040
#define I40E_AQ_CAP_ID_RXQ 0x0041
#define I40E_AQ_CAP_ID_TXQ 0x0042
@@ -463,8 +465,11 @@ struct i40e_aqc_arp_proxy_data {
__le32 pfpm_proxyfc;
__le32 ip_addr;
u8 mac_addr[6];
+ u8 reserved[2];
};
+I40E_CHECK_STRUCT_LEN(0x14, i40e_aqc_arp_proxy_data);
+
/* Set NS Proxy Table Entry Command (indirect 0x0105) */
struct i40e_aqc_ns_proxy_data {
__le16 table_idx_mac_addr_0;
@@ -490,6 +495,8 @@ struct i40e_aqc_ns_proxy_data {
u8 ipv6_addr_1[16];
};
+I40E_CHECK_STRUCT_LEN(0x3c, i40e_aqc_ns_proxy_data);
+
/* Manage LAA Command (0x0106) - obsolete */
struct i40e_aqc_mng_laa {
__le16 command_flags;
@@ -500,6 +507,8 @@ struct i40e_aqc_mng_laa {
u8 reserved2[6];
};
+I40E_CHECK_CMD_LENGTH(i40e_aqc_mng_laa);
+
/* Manage MAC Address Read Command (indirect 0x0107) */
struct i40e_aqc_mac_address_read {
__le16 command_flags;
@@ -571,6 +580,8 @@ struct i40e_aqc_get_switch_config_header_resp {
u8 reserved[12];
};
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_switch_config_header_resp);
+
struct i40e_aqc_switch_config_element_resp {
u8 element_type;
#define I40E_AQ_SW_ELEM_TYPE_MAC 1
@@ -596,6 +607,8 @@ struct i40e_aqc_switch_config_element_resp {
__le16 element_info;
};
+I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_config_element_resp);
+
/* Get Switch Configuration (indirect 0x0200)
* an array of elements are returned in the response buffer
* the first in the array is the header, remainder are elements
@@ -605,6 +618,8 @@ struct i40e_aqc_get_switch_config_resp {
struct i40e_aqc_switch_config_element_resp element[1];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_switch_config_resp);
+
/* Add Statistics (direct 0x0201)
* Remove Statistics (direct 0x0202)
*/
@@ -670,6 +685,8 @@ struct i40e_aqc_switch_resource_alloc_element_resp {
u8 reserved2[6];
};
+I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp);
+
/* Add VSI (indirect 0x0210)
* this indirect command uses struct i40e_aqc_vsi_properties_data
* as the indirect buffer (128 bytes)
@@ -1101,6 +1118,8 @@ struct i40e_aqc_remove_tag {
u8 reserved[12];
};
+I40E_CHECK_CMD_LENGTH(i40e_aqc_remove_tag);
+
/* Add multicast E-Tag (direct 0x0257)
* del multicast E-Tag (direct 0x0258) only uses pv_seid and etag fields
* and no external data
@@ -1216,7 +1235,7 @@ struct i40e_aqc_add_remove_cloud_filters_element_data {
} ipaddr;
__le16 flags;
#define I40E_AQC_ADD_CLOUD_FILTER_SHIFT 0
-#define I40E_AQC_ADD_CLOUD_FILTER_MASK (0x3F << \
+#define I40E_AQC_ADD_CLOUD_FILTER_MASK (0x3F << \
I40E_AQC_ADD_CLOUD_FILTER_SHIFT)
/* 0x0000 reserved */
#define I40E_AQC_ADD_CLOUD_FILTER_OIP 0x0001
@@ -1249,7 +1268,7 @@ struct i40e_aqc_add_remove_cloud_filters_element_data {
u8 reserved[4];
__le16 queue_number;
#define I40E_AQC_ADD_CLOUD_QUEUE_SHIFT 0
-#define I40E_AQC_ADD_CLOUD_QUEUE_MASK (0x3F << \
+#define I40E_AQC_ADD_CLOUD_QUEUE_MASK (0x7FF << \
I40E_AQC_ADD_CLOUD_QUEUE_SHIFT)
u8 reserved2[14];
/* response section */
@@ -1368,6 +1387,8 @@ struct i40e_aqc_configure_vsi_ets_sla_bw_data {
u8 reserved1[28];
};
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_configure_vsi_ets_sla_bw_data);
+
/* Configure VSI Bandwidth Allocation per Traffic Type (indirect 0x0407)
* responds with i40e_aqc_qs_handles_resp
*/
@@ -1379,6 +1400,8 @@ struct i40e_aqc_configure_vsi_tc_bw_data {
__le16 qs_handles[8];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_vsi_tc_bw_data);
+
/* Query vsi bw configuration (indirect 0x0408) */
struct i40e_aqc_query_vsi_bw_config_resp {
u8 tc_valid_bits;
@@ -1392,6 +1415,8 @@ struct i40e_aqc_query_vsi_bw_config_resp {
u8 reserved3[23];
};
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_vsi_bw_config_resp);
+
/* Query VSI Bandwidth Allocation per Traffic Type (indirect 0x040A) */
struct i40e_aqc_query_vsi_ets_sla_config_resp {
u8 tc_valid_bits;
@@ -1403,6 +1428,8 @@ struct i40e_aqc_query_vsi_ets_sla_config_resp {
__le16 tc_bw_max[2];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_vsi_ets_sla_config_resp);
+
/* Configure Switching Component Bandwidth Limit (direct 0x0410) */
struct i40e_aqc_configure_switching_comp_bw_limit {
__le16 seid;
@@ -1430,6 +1457,8 @@ struct i40e_aqc_configure_switching_comp_ets_data {
u8 reserved2[96];
};
+I40E_CHECK_STRUCT_LEN(0x80, i40e_aqc_configure_switching_comp_ets_data);
+
/* Configure Switching Component Bandwidth Limits per Tc (indirect 0x0416) */
struct i40e_aqc_configure_switching_comp_ets_bw_limit_data {
u8 tc_valid_bits;
@@ -1441,6 +1470,8 @@ struct i40e_aqc_configure_switching_comp_ets_bw_limit_data {
u8 reserved1[28];
};
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_configure_switching_comp_ets_bw_limit_data);
+
/* Configure Switching Component Bandwidth Allocation per Tc
* (indirect 0x0417)
*/
@@ -1452,6 +1483,8 @@ struct i40e_aqc_configure_switching_comp_bw_config_data {
u8 reserved1[20];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_switching_comp_bw_config_data);
+
/* Query Switching Component Configuration (indirect 0x0418) */
struct i40e_aqc_query_switching_comp_ets_config_resp {
u8 tc_valid_bits;
@@ -1462,6 +1495,8 @@ struct i40e_aqc_query_switching_comp_ets_config_resp {
u8 reserved2[23];
};
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_switching_comp_ets_config_resp);
+
/* Query PhysicalPort ETS Configuration (indirect 0x0419) */
struct i40e_aqc_query_port_ets_config_resp {
u8 reserved[4];
@@ -1477,6 +1512,8 @@ struct i40e_aqc_query_port_ets_config_resp {
u8 reserved3[32];
};
+I40E_CHECK_STRUCT_LEN(0x44, i40e_aqc_query_port_ets_config_resp);
+
/* Query Switching Component Bandwidth Allocation per Traffic Type
* (indirect 0x041A)
*/
@@ -1491,6 +1528,8 @@ struct i40e_aqc_query_switching_comp_bw_config_resp {
__le16 tc_bw_max[2];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_switching_comp_bw_config_resp);
+
/* Suspend/resume port TX traffic
* (direct 0x041B and 0x041C) uses the generic SEID struct
*/
@@ -1504,6 +1543,8 @@ struct i40e_aqc_configure_partition_bw_data {
u8 max_bw[16]; /* bandwidth limit */
};
+I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
+
/* Get and set the active HMC resource profile and status.
* (direct 0x0500) and (direct 0x0501)
*/
@@ -1586,6 +1627,8 @@ struct i40e_aqc_module_desc {
u8 reserved2[8];
};
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_module_desc);
+
struct i40e_aq_get_phy_abilities_resp {
__le32 phy_type; /* bitmap using the above enum for offsets */
u8 link_speed; /* bitmap using the above enum bit patterns */
@@ -1614,6 +1657,8 @@ struct i40e_aq_get_phy_abilities_resp {
struct i40e_aqc_module_desc qualified_module[I40E_AQ_PHY_MAX_QMS];
};
+I40E_CHECK_STRUCT_LEN(0x218, i40e_aq_get_phy_abilities_resp);
+
/* Set PHY Config (direct 0x0601) */
struct i40e_aq_set_phy_config { /* same bits as above in all */
__le32 phy_type;
@@ -1801,7 +1846,7 @@ struct i40e_aqc_nvm_config_read {
#define I40E_AQ_ANVM_READ_SINGLE_FEATURE 0
#define I40E_AQ_ANVM_READ_MULTIPLE_FEATURES 1
__le16 element_count;
- __le16 element_id; /* Feature/field ID */
+ __le16 element_id; /* Feature/field ID */
__le16 element_id_msw; /* MSWord of field ID */
__le32 address_high;
__le32 address_low;
@@ -1834,14 +1879,17 @@ struct i40e_aqc_nvm_config_data_feature {
__le16 feature_selection;
};
+I40E_CHECK_STRUCT_LEN(0x6, i40e_aqc_nvm_config_data_feature);
+
struct i40e_aqc_nvm_config_data_immediate_field {
-#define ANVM_FEATURE_OR_IMMEDIATE_MASK 0x2
- __le16 field_id;
- __le16 instance_id;
+ __le32 field_id;
+ __le32 field_value;
__le16 field_options;
- __le16 field_value;
+ __le16 reserved;
};
+I40E_CHECK_STRUCT_LEN(0xc, i40e_aqc_nvm_config_data_immediate_field);
+
/* Send to PF command (indirect 0x0801) id is only used by PF
* Send to VF command (indirect 0x0802) id is only used by PF
* Send to Peer PF command (indirect 0x0803)
@@ -2150,7 +2198,8 @@ struct i40e_aqc_oem_param_change {
#define I40E_AQ_OEM_PARAM_TYPE_BW_CTL 1
#define I40E_AQ_OEM_PARAM_MAC 2
__le32 param_value1;
- u8 param_value2[8];
+ __le16 param_value2;
+ u8 reserved[6];
};
I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_param_change);
@@ -2164,6 +2213,28 @@ struct i40e_aqc_oem_state_change {
I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_state_change);
+/* Initialize OCSD (0xFE02, direct) */
+struct i40e_aqc_opc_oem_ocsd_initialize {
+ u8 type_status;
+ u8 reserved1[3];
+ __le32 ocsd_memory_block_addr_high;
+ __le32 ocsd_memory_block_addr_low;
+ __le32 requested_update_interval;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocsd_initialize);
+
+/* Initialize OCBB (0xFE03, direct) */
+struct i40e_aqc_opc_oem_ocbb_initialize {
+ u8 type_status;
+ u8 reserved1[3];
+ __le32 ocbb_memory_block_addr_high;
+ __le32 ocbb_memory_block_addr_low;
+ u8 reserved2[4];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocbb_initialize);
+
/* debug commands */
/* get device id (0xFF00) uses the generic structure */
--
1.8.1.4
next prev parent reply other threads:[~2015-04-30 15:05 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-20 8:22 [dpdk-dev] [PATCH 00/18] i40e base driver update Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 01/18] i40e: copyright update Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 02/18] i40e: disable setting phy configuration Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 03/18] i40e: adjustment of register definitions and relevant Helin Zhang
2015-04-27 17:16 ` Thomas Monjalon
2015-04-28 2:29 ` Zhang, Helin
2015-04-20 8:22 ` [dpdk-dev] [PATCH 04/18] i40e: support of CEE DCBX on recent firmware versions Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 05/18] i40e: rework of 'i40e_hmc_get_object_va' Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 06/18] i40e: support of Fortpark device IDs and mac types Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 07/18] i40e: rename 'err' to 'perrno' Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 08/18] i40e: support NVM read on Fortpark, with minor enhancements Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 09/18] i40e: adminq enhancements Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 10/18] i40e: support of firmware build number Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 11/18] i40e: support of building both PF and VF driver together Helin Zhang
2015-04-27 17:25 ` Thomas Monjalon
2015-04-28 2:33 ` Zhang, Helin
2015-04-20 8:22 ` [dpdk-dev] [PATCH 12/18] i40e: enhancements of AQ commands and common interfaces Helin Zhang
2015-04-27 17:26 ` Thomas Monjalon
2015-04-28 2:34 ` Zhang, Helin
2015-04-20 8:22 ` [dpdk-dev] [PATCH 13/18] i40e: replacement of 'i40e_debug_read_register()' Helin Zhang
2015-04-27 17:28 ` Thomas Monjalon
2015-04-28 2:34 ` Zhang, Helin
2015-04-20 8:22 ` [dpdk-dev] [PATCH 14/18] i40e: add new interfaces of AQ commands and relevant Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 15/18] i40e: support of Fortpark FPGA Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 16/18] i40e: add more virtual channel operations Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 17/18] i40e: support of structure and command length check Helin Zhang
2015-04-20 8:22 ` [dpdk-dev] [PATCH 18/18] i40e: Minor enhancements in i40e_type.h Helin Zhang
2015-04-22 7:26 ` [dpdk-dev] [PATCH 00/18] i40e base driver update Cao, Min
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 00/33] " Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 01/33] i40e: copyright update Helin Zhang
2015-05-08 3:22 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 02/33] i40e: disable setting of phy configuration Helin Zhang
2015-05-08 3:22 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 03/33] i40e: adjustment of register definitions and relevant Helin Zhang
2015-05-08 3:21 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 04/33] i40e/base: rename 'err' to 'perrno' Helin Zhang
2015-05-08 3:20 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 05/33] i40e/base: support of building both PF and VF driver together Helin Zhang
2015-05-08 3:25 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 06/33] i40e/base: support of CEE DCBX on recent firmware versions Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 07/33] i40e: replacement of 'i40e_debug_read_register()' Helin Zhang
2015-05-08 3:23 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 08/33] i40e/base: rework of 'i40e_hmc_get_object_va' Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 09/33] i40e/base: update of shadow RAM read/write functions Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 10/33] i40e/base: catch NVM write semaphore timeout and retry Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 11/33] i40e/base: check for AQ timeout in aq_rc decode Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 12/33] i40e/base: fix up NVM update sm error handling Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 13/33] i40e/base: enhancement of polling NVM semaphore Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 14/33] i40e/base: enhancements of NVM checksum calculation Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 15/33] i40e/base: replacement of DEBUGOUT() with i40e_debug() Helin Zhang
2015-05-08 3:24 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 16/33] i40e/base: add fw build info to AQ data Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 17/33] i40e/base: define and use i40e_is_vf() Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 18/33] i40e/base: grab NVM devstarter version not image version Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 19/33] i40e/base: enhancements on adminq init and sending asq command Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 20/33] i40e/base: i40e_aq_get_link_info() should be used directly Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 21/33] i40e/base: add new interfaces for future use Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 22/33] i40e/base: update of get/set LED functions Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 23/33] i40e/base: clean up sparse complaint in i40e_debug_aq Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 24/33] i40e/base: get pf_id from HW rather than PCI function Helin Zhang
2015-05-08 3:20 ` Wu, Jingjing
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 25/33] i40e/base: find partition_id in npar mode, and disable FCOE by default Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 26/33] i40e/base: Reassign incorrect PHY type as a workaround for a FW issue Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 27/33] i40e/base: add AOC phy types to case statement in get_media_type Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 28/33] i40e/base: support for iSCSI capability Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 29/33] i40e/base: set FLAG_RD when sending driver version to FW Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 30/33] i40e/base: future proof some sizeof calls Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 31/33] i40e/base: add more virtual channel operations for future use Helin Zhang
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 32/33] i40e/base: rework of structures and macros " Helin Zhang
2015-04-30 15:03 ` Helin Zhang [this message]
2015-05-07 1:17 ` [dpdk-dev] [PATCH v2 00/33] i40e base driver update Cao, Min
2015-05-08 5:54 ` Liu, Jijiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430406219-23901-34-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=monica.kenguva@intel.com \
--cc=shannon.nelson@intel.com \
--cc=steven.j.murray@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).