DPDK patches and discussions
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] i40evf: fix of supporting jumbo frame
Date: Thu,  7 May 2015 09:40:59 +0800	[thread overview]
Message-ID: <1430962859-26782-1-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1429687117-3421-1-git-send-email-helin.zhang@intel.com>

It wouldn't check the configured maximum packet length, and then
the scattered receiving function wouldn't be selected at all even
if it wants to receive a jumbo frame. The fix is to select the
correct RX function according to the configurations.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.h    |    2 +
 lib/librte_pmd_i40e/i40e_ethdev_vf.c |   85 +++++++++++++++++++++++-----------
 lib/librte_pmd_i40e/i40e_rxtx.c      |    1 -
 3 files changed, 59 insertions(+), 29 deletions(-)

v2 changes:
* Removed maximum packet length check and jumbo frame check in
  i40evf_dev_start(), as the same checks are already in each queue
  initialization.

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h b/lib/librte_pmd_i40e/i40e_ethdev.h
index b9bed5a..7ecd249 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.h
+++ b/lib/librte_pmd_i40e/i40e_ethdev.h
@@ -36,6 +36,8 @@
 
 #include <rte_eth_ctrl.h>
 
+#define I40E_VLAN_TAG_SIZE        4
+
 #define I40E_AQ_LEN               32
 #define I40E_AQ_BUF_SZ            4096
 /* Number of queues per TC should be one of 1, 2, 4, 8, 16, 32, 64 */
diff --git a/lib/librte_pmd_i40e/i40e_ethdev_vf.c b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
index a0d808f..e260bb5 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev_vf.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
@@ -1417,23 +1417,74 @@ i40evf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 }
 
 static int
+i40evf_rxq_init(struct rte_eth_dev *dev, struct i40e_rx_queue *rxq)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct rte_eth_dev_data *dev_data = dev->data;
+	struct rte_pktmbuf_pool_private *mbp_priv;
+	uint16_t buf_size, len;
+
+	rxq->qrx_tail = hw->hw_addr + I40E_QRX_TAIL1(rxq->queue_id);
+	I40E_PCI_REG_WRITE(rxq->qrx_tail, rxq->nb_rx_desc - 1);
+	I40EVF_WRITE_FLUSH(hw);
+
+	/* Calculate the maximum packet length allowed */
+	mbp_priv = rte_mempool_get_priv(rxq->mp);
+	buf_size = (uint16_t)(mbp_priv->mbuf_data_room_size -
+					RTE_PKTMBUF_HEADROOM);
+	rxq->hs_mode = i40e_header_split_none;
+	rxq->rx_hdr_len = 0;
+	rxq->rx_buf_len = RTE_ALIGN(buf_size, (1 << I40E_RXQ_CTX_DBUFF_SHIFT));
+	len = rxq->rx_buf_len * I40E_MAX_CHAINED_RX_BUFFERS;
+	rxq->max_pkt_len = RTE_MIN(len,
+		dev_data->dev_conf.rxmode.max_rx_pkt_len);
+
+	/**
+	 * Check if the jumbo frame and maximum packet length are set correctly
+	 */
+	if (dev_data->dev_conf.rxmode.jumbo_frame == 1) {
+		if (rxq->max_pkt_len <= ETHER_MAX_LEN ||
+			rxq->max_pkt_len > I40E_FRAME_SIZE_MAX) {
+			PMD_DRV_LOG(ERR, "maximum packet length must be "
+				"larger than %u and smaller than %u, as jumbo "
+				"frame is enabled", (uint32_t)ETHER_MAX_LEN,
+					(uint32_t)I40E_FRAME_SIZE_MAX);
+			return I40E_ERR_CONFIG;
+		}
+	} else {
+		if (rxq->max_pkt_len < ETHER_MIN_LEN ||
+			rxq->max_pkt_len > ETHER_MAX_LEN) {
+			PMD_DRV_LOG(ERR, "maximum packet length must be "
+				"larger than %u and smaller than %u, as jumbo "
+				"frame is disabled", (uint32_t)ETHER_MIN_LEN,
+						(uint32_t)ETHER_MAX_LEN);
+			return I40E_ERR_CONFIG;
+		}
+	}
+
+	if (dev_data->dev_conf.rxmode.enable_scatter
+		|| (rxq->max_pkt_len + 2 * I40E_VLAN_TAG_SIZE) > buf_size) {
+		dev_data->scattered_rx = 1;
+		dev->rx_pkt_burst = i40e_recv_scattered_pkts;
+	}
+
+	return 0;
+}
+
+static int
 i40evf_rx_init(struct rte_eth_dev *dev)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
 	uint16_t i;
 	struct i40e_rx_queue **rxq =
 		(struct i40e_rx_queue **)dev->data->rx_queues;
-	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	i40evf_config_rss(vf);
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
-		rxq[i]->qrx_tail = hw->hw_addr + I40E_QRX_TAIL1(i);
-		I40E_PCI_REG_WRITE(rxq[i]->qrx_tail, rxq[i]->nb_rx_desc - 1);
+		if (i40evf_rxq_init(dev, rxq[i]) < 0)
+			return -EFAULT;
 	}
 
-	/* Flush the operation to write registers */
-	I40EVF_WRITE_FLUSH(hw);
-
 	return 0;
 }
 
@@ -1474,28 +1525,6 @@ i40evf_dev_start(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	vf->max_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
-	if (dev->data->dev_conf.rxmode.jumbo_frame == 1) {
-		if (vf->max_pkt_len <= ETHER_MAX_LEN ||
-			vf->max_pkt_len > I40E_FRAME_SIZE_MAX) {
-			PMD_DRV_LOG(ERR, "maximum packet length must "
-				    "be larger than %u and smaller than %u,"
-				    "as jumbo frame is enabled",
-				    (uint32_t)ETHER_MAX_LEN,
-				    (uint32_t)I40E_FRAME_SIZE_MAX);
-			return I40E_ERR_CONFIG;
-		}
-	} else {
-		if (vf->max_pkt_len < ETHER_MIN_LEN ||
-			vf->max_pkt_len > ETHER_MAX_LEN) {
-			PMD_DRV_LOG(ERR, "maximum packet length must be "
-				    "larger than %u and smaller than %u, "
-				    "as jumbo frame is disabled",
-				    (uint32_t)ETHER_MIN_LEN,
-				    (uint32_t)ETHER_MAX_LEN);
-			return I40E_ERR_CONFIG;
-		}
-	}
-
 	vf->num_queue_pairs = RTE_MAX(dev->data->nb_rx_queues,
 					dev->data->nb_tx_queues);
 
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 493cfa3..49d1030 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -64,7 +64,6 @@
 #define DEFAULT_TX_FREE_THRESH 32
 #define I40E_MAX_PKT_TYPE      256
 
-#define I40E_VLAN_TAG_SIZE 4
 #define I40E_TX_MAX_BURST  32
 
 #define I40E_DMA_MEM_ALIGN 4096
-- 
1.7.7

  parent reply	other threads:[~2015-05-07  1:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-22  7:18 [dpdk-dev] [PATCH] " Helin Zhang
2015-04-23  8:24 ` Xu, HuilongX
2015-05-07  1:40 ` Helin Zhang [this message]
2015-06-03  6:52   ` [dpdk-dev] [PATCH v2] " Wu, Jingjing
2015-06-04  6:54   ` [dpdk-dev] [PATCH v3] " Helin Zhang
2015-06-04 10:04     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430962859-26782-1-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).