From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 02/10] examples/tep_termination:define the basic VXLAN port information
Date: Fri, 15 May 2015 14:08:53 +0800 [thread overview]
Message-ID: <1431670141-7835-3-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1431670141-7835-1-git-send-email-jijiang.liu@intel.com>
Some basic VXLAN definations are added in this file, which includes VXLAN port information and VXLAN device structures.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long at intel.com>
---
examples/tep_termination/main.c | 1 +
examples/tep_termination/vxlan.h | 60 ++++++++++++++++++++++++++++++++++++++
2 files changed, 61 insertions(+), 0 deletions(-)
create mode 100644 examples/tep_termination/vxlan.h
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index ca2debe..bbb3bc1 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -52,6 +52,7 @@
#include <rte_virtio_net.h>
#include "main.h"
+#include "vxlan.h"
/* the maximum number of external ports supported */
#define MAX_SUP_PORTS 1
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
new file mode 100644
index 0000000..8595eed
--- /dev/null
+++ b/examples/tep_termination/vxlan.h
@@ -0,0 +1,60 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VXLAN_H_
+#define _VXLAN_H_
+
+#define PORT_MIN 49152
+#define PORT_MAX 65535
+#define PORT_RANGE ((PORT_MAX - PORT_MIN) + 1)
+
+#define VXLAN_N_PORTS 2
+#define VXLAN_HF_VNI 0x08000000
+#define DEFAULT_VXLAN_PORT 4789
+
+struct vxlan_port {
+ uint32_t vport_id; /**< VirtIO port id */
+ uint32_t peer_ip; /**< remote VTEP IP address */
+ struct ether_addr peer_mac; /**< remote VTEP MAC address */
+ struct ether_addr vport_mac; /**< VirtIO port MAC address */
+} __rte_cache_aligned;
+
+struct vxlan_conf {
+ uint16_t dst_port; /**< VXLAN UDP destination port */
+ uint32_t port_ip; /**< DPDK port IP address*/
+ uint32_t in_key; /**< VLAN ID */
+ uint32_t out_key; /**< VXLAN VNI */
+ struct vxlan_port port[VXLAN_N_PORTS]; /**< VXLAN configuration */
+} __rte_cache_aligned;
+
+#endif /* _MAIN_H_ */
--
1.7.7.6
next prev parent reply other threads:[~2015-05-15 6:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 6:08 [dpdk-dev] [PATCH 00/10] Add a VXLAN sample Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 01/10] examples/tep_termination:initialize the " Jijiang Liu
2015-05-15 23:53 ` Stephen Hemminger
2015-05-18 1:37 ` Liu, Jijiang
2015-05-15 23:55 ` Stephen Hemminger
2015-05-18 2:42 ` Liu, Jijiang
2015-05-15 6:08 ` Jijiang Liu [this message]
2015-05-15 6:08 ` [dpdk-dev] [PATCH 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 04/10] examples/tep_termination:implement " Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 06/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 08/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
2015-05-15 6:09 ` [dpdk-dev] [PATCH 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4 Jijiang Liu
2015-05-15 6:09 ` [dpdk-dev] [PATCH 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
2015-05-15 8:18 ` [dpdk-dev] [PATCH 00/10] Add a VXLAN sample Mcnamara, John
2015-05-18 2:52 ` Liu, Jijiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431670141-7835-3-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).