From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 08/10] examples/tep_termination:add TSO offload configuration
Date: Fri, 15 May 2015 14:08:59 +0800 [thread overview]
Message-ID: <1431670141-7835-9-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1431670141-7835-1-git-send-email-jijiang.liu@intel.com>
If the 'tso-segsz' is not 0, which means TSO offload is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/tep_termination/main.c | 17 +++++++++++++++++
examples/tep_termination/vxlan.c | 6 ++++++
examples/tep_termination/vxlan.h | 1 +
examples/tep_termination/vxlan_setup.c | 8 ++++++++
4 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index ffce0b6..144f8c8 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -111,6 +111,7 @@
#define CMD_LINE_OPT_NB_DEVICES "nb-devices"
#define CMD_LINE_OPT_UDP_PORT "udp-port"
#define CMD_LINE_OPT_TX_CHECKSUM "tx-checksum"
+#define CMD_LINE_OPT_TSO_SEGSZ "tso-segsz"
#define CMD_LINE_OPT_FILTER_TYPE "filter-type"
#define CMD_LINE_OPT_RX_RETRY "rx-retry"
#define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
@@ -142,6 +143,9 @@ uint16_t udp_port;
/* enable/disable inner TX checksum */
uint8_t tx_checksum;
+/* TSO segment size */
+uint16_t tso_segsz = 0;
+
/* RX filter type for tunneling packet */
uint8_t filter_idx;
@@ -270,6 +274,7 @@ tep_termination_usage(const char *prgname)
" --udp-port: UDP destination port for VXLAN packet\n"
" --nb-devices[1-64]: The number of virtIO device\n"
" --tx-checksum [0|1]: inner Tx checksum offload\n"
+ " --tso-segsz [0-N]: TSO segment size\n"
" --filter-type[1-3]: filter type for tunneling packet\n"
" 1: Inner MAC&VLAN and tenent ID\n"
" 2: Inner MAC and tenent ID\n"
@@ -300,6 +305,7 @@ tep_termination_parse_args(int argc, char **argv)
{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
{CMD_LINE_OPT_TX_CHECKSUM, required_argument, NULL, 0},
+ {CMD_LINE_OPT_TSO_SEGSZ, required_argument, NULL, 0},
{CMD_LINE_OPT_FILTER_TYPE, required_argument, NULL, 0},
{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
@@ -347,6 +353,17 @@ tep_termination_parse_args(int argc, char **argv)
enable_retry = ret;
}
+ if (!strncmp(long_option[option_index].name, CMD_LINE_OPT_TSO_SEGSZ,
+ sizeof(CMD_LINE_OPT_TSO_SEGSZ))) {
+ ret = parse_num_opt(optarg, INT16_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for TCP segment size [0-N]\n");
+ tep_termination_usage(prgname);
+ return -1;
+ } else
+ tso_segsz = ret;
+ }
+
if (!strncmp(long_option[option_index].name, CMD_LINE_OPT_UDP_PORT,
sizeof(CMD_LINE_OPT_UDP_PORT))) {
ret = parse_num_opt(optarg, INT16_MAX);
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 786281c..4283307 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -47,6 +47,7 @@ extern uint8_t tx_checksum;
extern struct vxlan_conf vxdev;
extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+extern uint16_t tso_segsz;
/* We cannot use rte_cpu_to_be_16() on a constant in a switch/case */
#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
@@ -156,6 +157,10 @@ process_inner_cksums(struct ether_hdr *eth_hdr, union tunnel_offload_info *info)
ol_flags |= PKT_TX_TCP_CKSUM;
tcp_hdr->cksum = get_psd_sum(l3_hdr, ethertype,
ol_flags);
+ if (tso_segsz != 0) {
+ ol_flags |= PKT_TX_TCP_SEG;
+ info->tso_segsz = tso_segsz;
+ }
} else if (l4_proto == IPPROTO_SCTP) {
sctp_hdr = (struct sctp_hdr *)((char *)l3_hdr + info->l3_len);
@@ -235,6 +240,7 @@ encapsulation(struct rte_mbuf *m, uint8_t vport_id)
m->outer_l3_len = sizeof(struct ipv4_hdr);
m->ol_flags |= ol_flags;
+ m->tso_segsz = tx_offload.tso_segsz;
/*VXLAN HEADER*/
vxlan->vx_flags = rte_cpu_to_be_32(VXLAN_HF_VNI);
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
index f000b93..dfe7063 100644
--- a/examples/tep_termination/vxlan.h
+++ b/examples/tep_termination/vxlan.h
@@ -64,6 +64,7 @@ union tunnel_offload_info {
uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
uint64_t l3_len:9; /**< L3 (IP) Header Length. */
uint64_t l4_len:8; /**< L4 Header Length. */
+ uint64_t tso_segsz:16; /**< TCP TSO segment size */
uint64_t outer_l2_len:7; /**< outer L2 Header Length */
uint64_t outer_l3_len:16; /**< outer L3 Header Length */
};
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 85668ba..af7eea9 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -78,6 +78,7 @@ extern uint16_t num_devices;
extern uint16_t udp_port;
extern uint8_t ports[RTE_MAX_ETHPORTS];
extern uint8_t filter_idx;
+extern uint16_t tso_segsz;
/* ethernet addresses of ports */
extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -215,6 +216,13 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
ports_eth_addr[port].addr_bytes[4],
ports_eth_addr[port].addr_bytes[5]);
+ if (tso_segsz != 0) {
+ struct rte_eth_dev_info dev_info;
+ rte_eth_dev_info_get(port, &dev_info);
+ if ((dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_TSO) == 0)
+ RTE_LOG(INFO, PORT, "hardware TSO offload is"
+ " not supported\n");
+ }
return 0;
}
--
1.7.7.6
next prev parent reply other threads:[~2015-05-15 6:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 6:08 [dpdk-dev] [PATCH 00/10] Add a VXLAN sample Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 01/10] examples/tep_termination:initialize the " Jijiang Liu
2015-05-15 23:53 ` Stephen Hemminger
2015-05-18 1:37 ` Liu, Jijiang
2015-05-15 23:55 ` Stephen Hemminger
2015-05-18 2:42 ` Liu, Jijiang
2015-05-15 6:08 ` [dpdk-dev] [PATCH 02/10] examples/tep_termination:define the basic VXLAN port information Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 04/10] examples/tep_termination:implement " Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 06/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
2015-05-15 6:08 ` [dpdk-dev] [PATCH 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
2015-05-15 6:08 ` Jijiang Liu [this message]
2015-05-15 6:09 ` [dpdk-dev] [PATCH 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4 Jijiang Liu
2015-05-15 6:09 ` [dpdk-dev] [PATCH 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
2015-05-15 8:18 ` [dpdk-dev] [PATCH 00/10] Add a VXLAN sample Mcnamara, John
2015-05-18 2:52 ` Liu, Jijiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431670141-7835-9-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).