From: Stephen Hemminger <stephen@networkplumber.org>
To: helin.zhang@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/5] ixgbe: remove unnecessary casts
Date: Fri, 15 May 2015 10:08:23 -0700 [thread overview]
Message-ID: <1431709707-5281-2-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1431709707-5281-1-git-send-email-stephen@networkplumber.org>
Don't do unnecessary casts when logging messages. Better to use
the correct printf format code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 5f9a1cf..a585151 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -568,8 +568,8 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
(hw->mac.type != ixgbe_mac_X550EM_x))
return -ENOSYS;
- PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d",
- (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
+ PMD_INIT_LOG(INFO, "Setting port %u, %s queue_id %d to stat index %d",
+ eth_dev->data->port_id, is_rx ? "RX" : "TX",
queue_id, stat_idx);
n = (uint8_t)(queue_id / NB_QMAP_FIELDS_PER_QSM_REG);
@@ -594,8 +594,8 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
else
stat_mappings->rqsmr[n] |= qsmr_mask;
- PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d",
- (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
+ PMD_INIT_LOG(INFO, "Set port %u, %s queue_id %d to stat index %d",
+ eth_dev->data->port_id, is_rx ? "RX" : "TX",
queue_id, stat_idx);
PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
@@ -889,11 +889,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d, SFP+: %d",
- (int) hw->mac.type, (int) hw->phy.type,
- (int) hw->phy.sfp_type);
+ hw->mac.type, hw->phy.type,
+ hw->phy.sfp_type);
else
PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d",
- (int) hw->mac.type, (int) hw->phy.type);
+ hw->mac.type, hw->phy.type);
PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
eth_dev->data->port_id, pci_dev->id.vendor_id,
@@ -2307,14 +2307,13 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
memset(&link, 0, sizeof(link));
rte_ixgbe_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
- PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
- (int)(dev->data->port_id),
- (unsigned)link.link_speed,
- link.link_duplex == ETH_LINK_FULL_DUPLEX ?
+ PMD_INIT_LOG(INFO, "Port %u: Link Up - speed %u Mbps - %s",
+ dev->data->port_id, link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
} else {
- PMD_INIT_LOG(INFO, " Port %d: Link Down",
- (int)(dev->data->port_id));
+ PMD_INIT_LOG(INFO, "Port %u: Link Down",
+ dev->data->port_id);
}
PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
dev->pci_dev->addr.domain,
--
2.1.4
next prev parent reply other threads:[~2015-05-15 17:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 17:08 [dpdk-dev] [PATCH v2 0/5] ixgbe: logging patches Stephen Hemminger
2015-05-15 17:08 ` Stephen Hemminger [this message]
2015-05-18 9:24 ` [dpdk-dev] [PATCH 1/5] ixgbe: remove unnecessary casts Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 2/5] ixgbe: don't print PCI address on link change Stephen Hemminger
2015-05-18 9:32 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 3/5] ixgbe: raise priority of significant events Stephen Hemminger
2015-05-18 9:27 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 4/5] ixgbe: use RTE_LOG not rte_log Stephen Hemminger
2015-05-18 9:28 ` Bruce Richardson
2015-05-15 17:08 ` [dpdk-dev] [PATCH 5/5] ixgbe: silence noisy log messages Stephen Hemminger
2015-05-18 9:32 ` Bruce Richardson
2015-05-18 16:39 ` Stephen Hemminger
2015-05-19 7:46 ` David Marchand
2015-05-19 14:40 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431709707-5281-2-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=helin.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).